Failed wifi connection after upgrade to 2.0

I need urgent help. I followed the specified steps to upgrade my wife's pb and it stopped connection to every available wifi.

Please ensure your PB is on Full Battery. (Low battery can cause dodgy wifi)
Forget all network settings.
Turn off wifi on the device.
Restart the device,
Turn WiFi back on and search for networks.
Connect to your network if it appears.
*Check if you are broadcasting your SSID
*Try connecting manually.
Please post details of any errors in full detail here.
"When in doubt, try another hole"

Similar Messages

TS1398 Why can't i get a good wifi connection after upgrading my my ipad2 IOS 5.1.1 to 6.0? I always need to turn it OFF then ON just to have a connection. But after a few minutes i need to do it again. Help me please. Thank you

When i upgraded my IOS. I always find it hard to continue my search in internet. I need to turn off the wifi connection then on it after wards even though using the laptops and other mobile phone with wifi have a very good signal. Just like this message, i need to off it then turn it on again.

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.

UE Boom Bluetooth speaker failed to connect after upgraded to iOS 8.2

After upgraded to iOS 8.2 on 2x iPhone 6 64GB (Gold & Silver) + iPad Mini, UE Boom Bluetooth speaker can never been "detected" nor connected.
Reset all settings does not help.
(UE Boom firmware was upgraded to v1.451 which supports Bluetooth 4.0 for remote power on/off).

Howdy Tampo,
If you are still unable to connect to or see your bluetooth speaker on your iPad I would use the troubleshooting in this article to help you further:
iOS: Troubleshooting Bluetooth connections
Thank you for using Apple Support Communities.
All the best,
Sterling

Issues with wifi connection after upgrading to iOS6.

Does anybody know of an fix that actually works to fix a phone not connecting to wifi with iOS6? I have tried I think every suggestion people have listed on here and on the apple forums and nothing works.
Here is what I've tried so far:
Resetting the network setting on my phone - didn't work
Tried turning off the Cellular Data suggestion - didn't work
I have done the hard reset on my phone and restored it - didn't work
I have tried changing the security settings on my router - didn't work
I bought a new router because my previous one was a few years old - didn't solve my issue. I know it's not my router, I have other devices in my home that connect to the router as they should.
I would really appreciate some help with this to get my wifi working again. I'm also having the same issue like others that since the iOS upgrade my phone also seems to be using data at about double the rate it used to. In 9 days I've used over 1GB of my 2GB plan and that is ridiculous, I'm only using my phone for email which I don't get any large attachments and some random surfing the internet. It never used this much data before when I was somewhere where I couldn't connect to wifi.
Is Apple working on fixing this or is it an Verizion issue?

I went to an Apple Store today to see if they could help me out at all with this issue. I had found out that my phone will connect to wifi at work and amazingly at the Apple Store, just not at my house. Here is what they told me after I had run down all the options of what I had tried to change with them and nothing worked. Came to the conclusion that it is more than likely a software issue and after doing some research at the store Apple is aware of the problem they told me. Apple is working on correcting the issue and is beta testing an updated iOS at the moment and just need to be patient for them to release it. The only immediate fix they gave me as an option was to purchase an Apple router for the time being and that should cure the connection problem. Since I had just purchased a new router a couple weeks ago I didn't feel like buying another one. So I hope this will help some people that have been searching for an answer to this problem like I have and have gotten no help from anywhere...

Issues with wifi connection after upgrade 10.8.5.

After the upgrade, wifi empty triangle. No way to activiate the wifi. Need to reboot 3 times (just reboot, any other action) to finally have the wifi activated and the connection working.
Known issue in this version? Fix planned?
Thanks.

I went to an Apple Store today to see if they could help me out at all with this issue. I had found out that my phone will connect to wifi at work and amazingly at the Apple Store, just not at my house. Here is what they told me after I had run down all the options of what I had tried to change with them and nothing worked. Came to the conclusion that it is more than likely a software issue and after doing some research at the store Apple is aware of the problem they told me. Apple is working on correcting the issue and is beta testing an updated iOS at the moment and just need to be patient for them to release it. The only immediate fix they gave me as an option was to purchase an Apple router for the time being and that should cure the connection problem. Since I had just purchased a new router a couple weeks ago I didn't feel like buying another one. So I hope this will help some people that have been searching for an answer to this problem like I have and have gotten no help from anywhere...

Gajim 0.12.2 failed to connect after upgrade

I have to downgrade to 0.12.1 and that's work fine.
gajim --verbose looks something like this:
DEBUG: socket sent <auth xmlns="urn:ietf:params:xml:ns:xmpp-sasl" mechanism="PLAIN">myjidandpass</auth>
DEBUG: dispatcher warn Unknown stanza: error
DEBUG: dispatcher ok Dispatching unknown stanza with type-> props->[u'urn:ietf:params:xml:ns:xmpp-streams'] id->None
DEBUG: client stop Disconnect detected
DEBUG: sasl stop Plugging <common.xmpp.auth_nb.SASL instance at 0x9c2bc2c> out of <common.xmpp.client_nb.NonBlockingClient instance at 0x9c425ec>.
DEBUG: nonblockingt stop Plugging <common.xmpp.transports_nb.NonBlockingTLS instance at 0x9c2ba0c> out of <common.xmpp.client_nb.NonBlockingClient instance at 0x9c425ec>.
DEBUG: dispatcher stop Plugging <common.xmpp.dispatcher_nb.Dispatcher instance at 0x9c2ba4c> out of <common.xmpp.client_nb.NonBlockingClient instance at 0x9c425ec>.
DEBUG: socket stop Plugging <common.xmpp.transports_nb.NonBlockingTcp instance at 0x9c4264c> out of <common.xmpp.client_nb.NonBlockingClient instance at 0x9c425ec>.

I just created a PKGBUILD which applies the patch from the Gajim Trac, waiting for 0.12.3 (:
Here it is:
PKGBUILD:
# $Id: PKGBUILD 166 2009-06-10 23:12:25Z shtrom $
# Maintainer: simo <[email protected]>
# Contributor: Nikos Kouremenos <[email protected]>
# Contributor: Olivier Mehani <[email protected]>
pkgname=gajim
pkgver=0.12.2
pkgrel=2
pkgdesc="Jabber client written in PyGTK"
arch=(i686 x86_64)
url="http://www.gajim.org/"
license=('GPL')
depends=('gtkspell' 'sqlite3' 'dnsutils' 'pygtk' 'libxss' 'perlxml' 'python>=2.5')
makedepends=('gettext' 'pkgconfig')
install=gajim.install
options=(!libtool)
source=(http://www.gajim.org/downloads/gajim-$pkgver.tar.gz
bug5084_fix.diff)
md5sums=('db0a69aa228559486a6694c4b9f27185'
'39abb26006b80ec99b94c7b5b36f44e1')
build() {
cd $startdir/src/gajim-$pkgver
patch -p1 < ${srcdir}/bug5084_fix.diff
./configure --prefix=/usr
make || return 1
make DESTDIR=$startdir/pkg install
bug5084_fix.diff:
Index: src/common/xmpp/auth_nb.py
===================================================================
--- a/src/common/xmpp/auth_nb.py
+++ b/src/common/xmpp/auth_nb.py
@@ -165,7 +165,7 @@
self.mecs.remove('PLAIN')
sasl_data = u'%s\x00%s\x00%s' % (self.username + '@' + \
self._owner.Server, self.username, self.password)
- asl_data = sasl_data.encode('utf-8').encode('base64').replace(
+ sasl_data = sasl_data.encode('utf-8').encode('base64').replace(
'\n','')
node = Node('auth', attrs={'xmlns': NS_SASL, 'mechanism': 'PLAIN'},
payload=[sasl_data])
(Be careful with the patch, as space/tab conversions may cause the MD5 check to fail. You may be better off getting directly from Gajim's Trac.)
Last edited by shtrom (2009-06-10 23:15:10)

I PHONE 4S WIFI NOT CONNECTING AFTER UPGRADING TO iOS7.1.1

i PHONE 4S WIFI NOT CONNECTING AFTER UPGRADING TO iOS7.1.1

Sorry to hear that.
Do you have a technical support question? If so, please don't hesitate to ask. Also, please let us know the troubleshooting steps you've taken so far.

WIFI Quit after upgrade to firmware 3.1.

My WIFI quit after upgrading from 2.1.1 to 3.1. It worked twice since the upgrade for a period of an hour or so. I have tried to reset the network, All settings, serveral reinstallation of the firmware. I also Tried to manually enter in my WIFI information, with no success. I tried everything. I can see wifi information when I go into the general settings>About> Wi-Fi Adress 00:1c:b3:48:ce..... My warrenty is no longer valid. Any suggestions???

I've now posted these changes at two other WiFi threads. Try these Settings changes:
The Setting changes are:
Fetch New Data > Push: Off
Fetch settings are set to Manual & in Advanced all is set to Manual.
My iPhone also lost WiFi but with the changes above it now connects though it takes a bit longer to find the signal. No longer have Push but WiFi is more important, to me anyway. Another iPhone user had success with the above changes.
Good luck.

IMac loses WiFi connection after waking from sleep on OSX 10.8.2

Bought a new mid-2011 21.5 inch IMac this week. It is not re-establishing WiFi connection after waking from sleep. Was happening on OSX 10.7 that it came with, so updated to 10.8.2 and same problem exists.
I am running a mid 2012 MacBook Pro with Retina Display alongside, on OSX 10.8.2 and no problems at all. Cannot work out what is causing the IMac to fail and neither can Apple!
Could it be the Netgear Wireless Router 3 years old? Full signal strength!

Me too!
I am on a MAC Pro desktop and I am having the same issues. I go to system preferences and just click the network icon. Then I close mail and when it opens it now sees the network. This is getting very annnoying.

IOS 6 Facetime not connecting after upgrade in UAE It was before on an Ipad purchased in Uk, I am miserable, I know its the carrier Etisalat, I sincerely some one finds a fix for this.

OS 6 Facetime not connecting after upgrade in UAE It was before on an Ipad purchased in Uk, I am miserable, I know its the carrier Etisalat, I sincerely some one finds a fix for this help.

I attempted to uninstall QT and reinstall- the QT 7.4 installer failed to install (it said a more up to date version was present, even though I'd trashed the old one). I downloaded and reinstalled 7.5 but itunes still did not work.
While my solution wasn't ideal
1) It was what Apple told me to do!
2) It seemed preferable to A) A complete system reinstall, B) removing 264 .plist files one at a time, rebooting, and seeing which one was causing the problem.
I still have the old .plist files in another folder, and can replace them in my preferences folder if I decide I need them. Most apps will create a new .plist file on start-up if there is not one present, so unless it is a program where I have gone to great lengths to change preferences from default, I'm guessing I will not notice much difference (and if I do, I can always go to my archive of .plists, or on Time Machine for that matter...)

TS1398 I have problems with my wifi connection after update the ios6 any advice

I have problems with my wifi connection after update the ios6 any advice

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Fixed!

MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Airport says no IP is detected then suddenly reconnects?
This has been a problem I’ve been troubleshooting for the last month. I’m new to the Mac family and have loved my experience up until this point. I was under the impression that mac’s are supposed to be so user friendly that even your grandmother could use one with out having any technical knowledge. I mean I shouldn’t have to be deleting drivers or reformat my mac because of an OS update glitch? (That’s what the guy at the Genius Bar told me to do.) What I refused to succumb to was that I’m really good with computers. I get at least a phone call every other week from someone asking me for tech support. So I’d like to think that nothing I’ve done to the system would have caused this anomaly.
After numerous attempts of troubleshooting and researching forms I believe I’ve discovered a solutions that seems to be working for me.
Here are the steps I took to create a consistent connection to my Wi-Fi. I believe it was a combination of all these steps to create success.
1.) Changed my router to use G Wireless Only. (I’m assuming this removed any unnecessary frequencies to allow G to broadcast stronger?)
2.) Did a scan on the other networks in my area to find out what channel everyone else was broadcasting on. Copy and past the text below into a terminal window.
sudo ln -s /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resourc es/airport /usr/sbin/airport
This will allow you to simply type “airport” in the terminal window to execute the command.
Type airport –s
This will display all the networks in your area and what channel they are broadcasting on.
3.) Changed my router to use a channel that no one in my area was using. (This helped to make my network stronger and free of interference.)
The last steps will help your home network improve but these next steps I believe helped fix any install errors caused maybe by the 10.6.5 update on my mac.
4.) Boot your Mac into safe mode by holding down the shift key while booting.
5.) Open System Preferences and Click on Network.
6.) Click the drop down menu from Locations at the top of the screen. Click edit locations..
7.) Create a new location by clicking the + and give it a new name.
8.) Delete the old location by clicking on the old locations name and click the – to remove.
9.) Reboot
10.) Open System Preference and click on Network.
11.) Click on the settings sprocket next to the + and – and click on Set Service Order…
12.) Drag Airport to the top of the list of devices then click Ok.
Now this last step is what seemed to eliminate the issue. I hardcoded my IP address to my network. This way my computer will always use the same IP and not have to search.
13.) Click on Advanced under Network.
14.) Click on TCP/IP. Click on the drop down for Configure IPv4 and change it to Manually.
15.) Fill out the fields with your IPv4 Address: 192.168.1.1xx (x=whatever number) Subnet Mask: 255.255.255.0 Router: 192.168.1.1 (All of these settings are pretty standard for most home networks.)
16.) Click on the drop down for Configure IPv6 and change it to Off.
17.) Next click on the DNS tab at the top.
18.) Click the + to add a DNS Record.
To find your DNS Server open a Terminal window by launching Applications --> Utilities --> Terminal
Then Type cat /etc/resolv.conf
(There is a space between cat and /. Without it you’ll get no such file or directory.)
This should return two addresses. Your ISP’s DNS Servers.
19.) Add both records to the DNS and click Ok.
20.) Click Ok then under Network Click Ok.
21.) Reboot router then Mac
22.) Fixed my connection issue
The symptoms I experienced eluded me to believe that something with the DHCP is going into an idle then disconnecting. Before when DHCP was set to automatically assign the network signal would time out then searchers for a new IP resulting in Airport displaying No IP is detected. By setting my IP to a fixed address I still notice a slight drop in bandwidth at moments but because of the assigned IP I never loose connection. I can now stream video, play games, chat all without getting disconnected.
I believe this fix will work for my home network but I also noticed this issue at work so for each location that I connect for the time being I’ll create each there own location and hardcode the IP address to that network. I’ve been reading that 10.6.6 is coming soon so maybe this will be resolved for good in the next update.
Let me know if this helps or if you have any questions.
Best of luck.
Message was edited by: erockdabass
Message was edited by: erockdabass

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

My i Phone drops WiFi connection after just a few minutes and wont reconnect unless I reset the network settings and reboot the phone?

My i Phone 4s has suddenly started to drop wifi connection after nealy months of near perfect connections?
To restore a wifi connection I have to reset the network settings and restart the phone, this only fixes the issues for around 2-3 mins?
Other quick fixes like switching wifi on and off/ switching to airoplane mode for a few secconds have no impact.
This is really annoying as I am using my data allowence very quickly, and as the phone is continually searching for a wifi connection the battery time has reduced dramatically.
I just wondered if any one else has the same issue, and any suggestions as to how I can fix this.
Thanks in Advance

Reboot.
Restore (from backup)
Restore (as new)
Test after each step. If one of them doesn't fix the problem, make an appointment at the genius bar.

TS1398 Still having problems with my ipad wifi connection since upgrading to IOS 6. Can Apple do something about it the soonest possible time. I don't have this kind of problem using IOS 5.1.1 Can you at least put back the 5.1.1 if you cant find a solut

So disappointed with IOS 6. I'm having weak wifi connection since upgrading to it. Can Apple do something about it? Can you at least reset it to IOS 5.1.1?

Sorry Jim for the wrong question because I'm getting frustated with my IPAD since I can't use it for surfing internet with a faster speed. Ipad was very convenient to use until this IOS 6 upgrade. Tried all the suggestions in the forums but still gets back to weak wifi connection.

I cannot connect after upgrading Firefox. I work in corporate environment and cannot change security settings. Why this feature was not tested before upgrading to current version?

I cannot connect to ANY web sites (for example, yahoo, google, etc.

[https://support.mozilla.org/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading Firefox]
see also [https://support.mozilla.org/en-US/kb/Firewalls Firewalls]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Failed wifi connection after upgrade to 2.0

Similar Messages

Maybe you are looking for