Failed windows 7 and windows reply
windows failed and
status : oxc000000f
the boot selection failed because a required device is inaccessible
product key: [Personal Information Removed] and hp pavilion g4
sir formula send
Hi @rajendarayogi28 ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Pavilion dm4 Notebook and getting a blank or black screen on startup. Try performing a hard reset.
When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
Here is a link to computer won't start for Windows 7.
If that does not help at the end of the document it shows you to do a hardware test.
Did you install any new hardware on this Notebook?
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!
Similar Messages
-
Update 11.1.4 failed on WVista and windows 7 laptops. ITunes do not work on either computer. I re-installed it on Windows 7 and again got same message"Error 7(windows error 126).
Hello notime4,
The article linked below details some useful troubleshooting steps that can help stabilize iTunes on your computer.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen -
PC fails to reboot and shows blank screen after automatic windows updates including SP
Pavilion- a1130n" WINXP ProfessionalC fails to reboot and shows blank screen after automatic install ing windows updates including SP 3
I would love to say that a refresh worked for me however it did not.It takes about 30 Minutes total I was able to trace part of the issue to a Registry Key that was tagging the processor. Because my BIOS manages its own temp gauge and windows is trying to
build on in I had to turn the BIOS one off as well as for some reason I get better funtionality with Visualization off.
I am still dealing with a lag but I was able to get ride of the freeze that made the computer completely useless. -
Execution of gi installation script failed windows
I have windows 2012, i tried install Oracle grid but in 83% , it get an error : INS-32123 execution of gi installation script failed . How can i solve?
Estado de ejecución del nodo con fallos:rac1
Errores : Using configuration parameter file: C:\app\12.1.0\grid\crs\install\crsconfig_params|2015/02/17 12:09:24 CLSRSC-363: User ignored prerequisites during installation| [0m|02/17/15 12:10:40 OracleOHService service stopped|02/17/15 12:10:40 OracleOHService service removed|02/17/15 12:10:40 OracleOHService service installed|OhasdConfigureRegistry: started|OhasdConfigureRegistry: completed with 0|02/17/15 12:11:02 OracleOHService service started|ohasd is starting|CRS-4133: Se ha parado Servicios de Alta Disponibilidad de Oracle.|CRS-4123: Se ha iniciado Servicios de Alta Disponibilidad de Oracle.|CRS-4133: Se ha parado Servicios de Alta Disponibilidad de Oracle.|CRS-4123: Se ha iniciado Servicios de Alta Disponibilidad de Oracle.|CRS-2672: Intentando iniciar ''ora.evmd'' en ''rac1''|CRS-2672: Intentando iniciar ''ora.mdnsd'' en ''rac1''|CRS-2676: El inicio de ''ora.mdnsd'' en ''rac1'' se ha realizado correctamente|CRS-2676: El inicio de ''ora.evmd'' en ''rac1'' se ha realizado correctamente|CRS-2672: Intentando iniciar ''ora.gpnpd'' en ''rac1''|CRS-2676: El inicio de ''ora.gpnpd'' en ''rac1'' se ha realizado correctamente|CRS-2672: Intentando iniciar ''ora.cssdmonitor'' en ''rac1''|CRS-2672: Intentando iniciar ''ora.gipcd'' en ''rac1''|CRS-2676: El inicio de ''ora.cssdmonitor'' en ''rac1'' se ha realizado correctamente|CRS-2676: El inicio de ''ora.gipcd'' en ''rac1'' se ha realizado correctamente|CRS-2672: Intentando iniciar ''ora.cssd'' en ''rac1''|CRS-2676: El inicio de ''ora.cssd'' en ''rac1'' se ha realizado correctamente||Fallo al crear el archivo spfile de ASM en el grupo de discos. Se ha producido el siguiente error: ORA-29783: GPnP attribute SET failed with error [CLSGPNP_ERR]|||2015/02/17 12:30:57 CLSRSC-184: Configuration of ASM failed| [0m|2015/02/17 12:30:57 CLSRSC-258: Failed to configure and start ASM| [0m
Salida Estándar : Using configuration parameter file: C:\app\12.1.0\grid\crs\install\crsconfig_params2015/02/17 12:09:24 CLSRSC-363: User ignored prerequisites during installation [0m02/17/15 12:10:40 OracleOHService service stopped02/17/15 12:10:40 OracleOHService service removed02/17/15 12:10:40 OracleOHService service installedOhasdConfigureRegistry: startedOhasdConfigureRegistry: completed with 002/17/15 12:11:02 OracleOHService service startedohasd is startingCRS-4133: Se ha parado Servicios de Alta Disponibilidad de Oracle.CRS-4123: Se ha iniciado Servicios de Alta Disponibilidad de Oracle.CRS-4133: Se ha parado Servicios de Alta Disponibilidad de Oracle.CRS-4123: Se ha iniciado Servicios de Alta Disponibilidad de Oracle.CRS-2672: Intentando iniciar ''ora.evmd'' en ''rac1''CRS-2672: Intentando iniciar ''ora.mdnsd'' en ''rac1''CRS-2676: El inicio de ''ora.mdnsd'' en ''rac1'' se ha realizado correctamenteCRS-2676: El inicio de ''ora.evmd'' en ''rac1'' se ha realizado correctamenteCRS-2672: Intentando iniciar ''ora.gpnpd'' en ''rac1''CRS-2676: El inicio de ''ora.gpnpd'' en ''rac1'' se ha realizado correctamenteCRS-2672: Intentando iniciar ''ora.cssdmonitor'' en ''rac1''CRS-2672: Intentando iniciar ''ora.gipcd'' en ''rac1''CRS-2676: El inicio de ''ora.cssdmonitor'' en ''rac1'' se ha realizado correctamenteCRS-2676: El inicio de ''ora.gipcd'' en ''rac1'' se ha realizado correctamenteCRS-2672: Intentando iniciar ''ora.cssd'' en ''rac1''CRS-2676: El inicio de ''ora.cssd'' en ''rac1'' se ha realizado correctamenteFallo al crear el archivo spfile de ASM en el grupo de discos. Se ha producido el siguiente error: ORA-29783: GPnP attribute SET failed with error [CLSGPNP_ERR]2015/02/17 12:30:57 CLSRSC-184: Configuration of ASM failed [0m2015/02/17 12:30:57 CLSRSC-258: Failed to configure and start ASM [0m -
IPAM Upgrade Failed - Windows Server 2012 R2
Why previous discussion was locked?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/324f812f-80b5-4822-aadc-cf92d9f11949/ipam-upgrade-failed-windows-server-2012-r2?forum=windowsserverpreview
IPAM Upgrade Failed - Windows Server 2012 R2
Hi All,
I'm experiencing some problems with the upgrade procedure of an IPAM service hosted on a Windows Server 2012 R2 instance which originally was deployed on a non-R2 version. I've recently done in-place upgrade of the W2K12 OS to W2K12R2 which went absolutely
fine, however when I'm trying to upgrade the IPAM service itself (from v6.2.0.1 to v6.3.0.1), I'm receiving an error message right after the database schema update procedure.
Received error message:
Failed to convert Schema. Please see the details.
The given key was not present in the dictionary.
Please restart the Wizard to update the IPAM server.
Tried to restart the wizard several times, but it ends up with the same result.
Also I noticed that the event log shows some authentication problems with the WID DB service:
Connecting to IPAM database failed with,
Number: 18456
ErrorCode: -2146232060
Level: 14
State: 1
Message: Login failed for user 'NT AUTHORITY\NETWORK SERVICE'.
For database,
Database Type: WindowsInternalDatabase
Database Authentication Type: WindowsAuthentication
Database Name: IPAM
Database Path: C:\Windows\System32\ipam\Database
Database Server:
Database Server Port: 0
Username:
The original IPAM deployment was pretty much a standard one by the official MS guides so there were no custom actions applied at any point in time. Right now I can access neither the IPAM features nor the previously made inventory, because server manager wouldn't
let me do so until the upgrade is complete. For the time being this upgrade failure seems to be a bug.
Kindly ask you to help me out with this issue.
Thanks in advance.Hi, event id 60002 in admin log:
Connecting to IPAM database failed with,
Number: 18456
ErrorCode: -2146232060
Level: 14
State: 1
Message: Login failed for user 'NT AUTHORITY\NETWORK SERVICE'.
For database,
Database Type: WindowsInternalDatabase
Database Authentication Type: WindowsAuthentication
Database Name: IPAM
Database Path: C:\Windows\System32\ipam\Database
Database Server:
Database Server Port: 0
Username:
and event id 10459:
The IPAM database schema conversion from version 6.2.0.1 to version 6.3.0.1 failed with error: The given key was not present in the dictionary.. Your IPAM installation might not work properly.
10x -
User can't authenticate...auth-failed/windows workstation not allowed
Keep on running into an odd problem. I have some users logging in via soft vpn connection. Yesterday, they were able to log in without a problem. Today they are getting 01/31/2007 08:09:21
Authen failed
Windows workstation not allowed .. ..
Why can they authenticate 1 day and then be denied. This happened last week as well. The server adminstrator seemed to think it was a user setup issue and gave them another user account. Now as you can see above, the same thing has happened. I don't get it. Any help would be appreciated.For ACS to perform Windows authentications we need to specifiy a workstation name.
In AD , the user should have access to all computers.
OR
A computer account named CISCO should exist.
All users that Windows will authenticate have permission to log in to the computer named CISCO.
ACS shows this error message only when the user tries to login from a work station he has no permission to log on.
If you are using ACS 4.1 this link will be useul.
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_installation_guide_chapter09186a008070a63c.html#wp1041202 -
T61 DVD/CD-RW drive fails to read and crashes
Hello Everyone, I hope people still visit this area of the forums!
I've highlighted and bolded the symptoms to make them easier to find.
I recently purchased a T61 6457-C15 on eBay, and have been in the proccess of setting up and customizing it to suit my tastes. When I recieved the laptop, it looked as though Windows had been restored to original factory state, plus some free software, so I proceeded under that assumption. First I used Windows Update to download all the updates that it could find including IE8. I wanted to have an anti-virus program running on my computer before I used a browser to access the internet. I ran IE8 and went straight to the Microsoft Security Essentials website and downloaded the Install program. At this point I tried to remove the pre-installed and expired Norton Internet Security using the built-in uninstall, but it failed. A message box popped saying that I needed to put the Norton installation disc in the CD-ROM drive so that the uninstall program could find a Norton support file. My computer did not come with any discs, but my mothe had bought Norton 2008, so I took that disc and put it in the drive. The drive started spinning right away, and the uninstall program found the file it was looking for in a few seconds. The support file directed me to the Norton website to get their removal tool, which removed Norton from my system in short order. Afterwards, I ran the Microsoft Security Essentials install program and got MSE running on my computer before doing anything else.
Then I went to the Lenovo support website and had it auto-detect my system. That took me to the support page for my system, where I went to the "Downloads and Drivers" page. I downloaded Access Connections and ThinkVantage Toolbox for Vista 32-bit (my OS is Vista Business 32-bit). I then used Lenovo System Update to retrieve all the updates it deemed neccessary from Lenovo, including those for itself and system components, both software and firmware. There were 35 or more updates suggested, and I trusted the software, so I started downloading them all. I'm not sure, but I think that a DVD/CD-RW drive update was included in the list, but I can't remember if it was auxiliary software, drivers or firmware. After Lenovo System Update was convinced that it had all the neccessary updates, I downloaded Revo Uninstaller and set about removing uneccassary and unwanted programs from my computer and trimming the startup list. I did not touch any Windows or ThinkVantage components, and I searched each program online, so I'm sure that I did not delete or disable any drivers or system files, or anything from Lenovo. I mainly removed Apple products and non-functional software from my system, including an integrated camera driver (my system does not have an integrated camera) and third-party programs that were already missing files or otherwise inoperable when I got my computer. Up to this point I had been using a gigabit ethernet connection to download software; I had not used the DVD/CD-RW drive except for the one time I specified earlier.
Now that I had my system set up to my liking, including personalization and power settings, I started to install my first program: Command & Conquer the First Decade from a DVD-ROM. When I put the disc in the drive and closed it, it took a few seconds for the drive to spin up, and once it did, it was constantly running at high speed and I could hear the reader constantly moving back and forth quickly. After a few minutes the disc's install menu finally appeared, so I clicked on the install button. I waited several minutes but nothing happened, so I tried to view the contents of the drive by going to My Computer > DVD/CD-RW drive (D, right clicking and selecting explore from the menu options. When I did that, the address bar of the My Computer window started to fill up with a dark gray progress bar and said "loading (D", I think with the drive or disc name after it. After it took several minutes to fill completely, nothing happened. I waited a few more minutes to see if anything would change, (nothing did,) I clicked on the X button in the top right corner of the window to close it. A few minutes and clicks later, the My Computer window was labeled as (not responding), and the window itself became grayed-out. I started Task Manager and tried to close the My Computer window, but the entire Windows Desktop disappeared along with it, saying that it would attempt to restart. Even Task Manager became non-responsive and quit after closing My Computer. After a few minutes of staring at my background (and nothing else), I ejected the disc, and Windows Desktop reappeared immediately and acted as if nothing had ever been wrong.
I checked Device Manager, but neither the DVD/CD-RW drive nor any of the ATA controllers were flagged; in fact they all said they were working properly with up-to-date drivers. I ran the ThinkVantage Toolbox diagnostics on the drive using a data CD, a music CD and a different DVD-ROM, but in each case the drive failed the tests and a message box popped-up saying that the discscould not be read because they were scratched or there was a hardware problem. I checked the discs both before I put them in and after I took them out, and they were not scratched; also, all of the discs are publisher-manufactured from a software or music company. I restarted my computer, booted the Rescue and Recovery option and Ran PC-Doctor from there. I ran the same drive read tests with the same failure results. The entire time the drive was behaving the same way it had when it first failed to read a disc. Next I removed and cleaned the drive both inside and out with a can of compressed air; I also cleaned the ultrabay itself. Finally I tried fixing the problem with Microsoft Fix It, but when it automatically ejected the drive and i put a disc in, the disc became trapped in the drive and Windows froze up like before. I had to restart Windows twice (once with a BSOD) in order to get the disc out. When the disc was removed the computer went back to normal operation once again.
Please help me, my DVD/CD-RW drive is a Matshi ta UJDA775, my operating system is Windows Vista Business and my T61's model number is 6457-C15. I have tried all the troubleshooting fixes and none have worked. I have tried updating drivers and using diagnostic software and they have not worked. I have tried disabling drag-to-disc burning and it has not worked. I have treid removing and cleaning the drive and that has not solved my problem. I did notice that the driver for the "Intel(R) ICH8M-E/M SATA AHCI controller" is the only related driver that can be rolled back, so maybe that might fix it. I'm also wondering if a firmware change caused this, and if so, if there is any way I can undo that. The only other fix I've heard of that I haven't tried is editing the registry, but I'm hesitant to do that. I haven't tried booting from the CD drive because I have no bootable CDs and I'm worried that my computer might get stuck in that mode. I'm hoping that someone can tell me what I can do to try to fix this problem, preferably without wrecking my computer. Thank you for taking the time to read my post.
P.S. Just adding a note; I went through both the Microsoft and Lenovo Update histories and the only related updates I could find were: ThinkPad BIOS update, Easy Eject utility, Intel Matrix Storager Manager driver for Windows (32-bit), and maybe one of the two Intel Chipset Support for Vista updates. I tried rolling back the AHCI driver but it had no effect.
Solved!
Go to Solution.Well, my problem is fixed, and here's how. I had some trouble figuring out how to contact Lenovo technical support; online options directed me to the IBM support website, which was clearly designed for businesses. Selecting the "Call technical support" option on the Lenovo support website and then choosing my country gave me a 24/7 hotline number. After waiting about five minutes on hold, a nice young fellow by the name of "Tyrese" answered (I maybe misspelling his name), but the connection was so bad that we could barely hear each other. Although he semed eager to help, when I told him my problem the first things he suggested were simple, like cleaning the drive, However, when I told him all of my efforts, described above, to fix the problem myself and read him the log from the Rescue and Recovery diagnostic program, after he checked the error codes against his computer database he promptly replied that the only fix was to send out a new drive. I was happy to have gotten such a successful resolution to a support call in less than fifteen minutes; apparently, all the work I had done trying to solve the problem myself had paid off in a way. Unfortunately, although I had tried to spell out my address for him, some of it got left off of the address label, which caused some trouble in receiving the new drive. Once I got it, I installed it using the uninstall & remove (old drive), shut down, start up, insert & install (new drive) method that I referenced earlier in this topic. I've been using the new drive since then without any trouble, so I guess that the only fix was to replace the drive. Also, I noticed that the new drive was a Hitachi, perhaps a T400/410 or T500/510 Ultrabay Slim drive, which should help me avoid the problems that other users were having with the older Matshi-ta drives. I hope this description helps anyone else having a problem with the optical drives on the T61/61p.
-
When I install Photoshop CC it says that an update failed to download and whenever I retry it doesn't work. How do I fix this?
Update that fail can sometimes be downloade and installed manually also here is a Trouble shooting Update guide http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html#TroubleshootUpdates
Adobe - Photoshop : For Windows
Adobe - Photoshop : For Macintosh
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
I tried to install the new version of iTunes days ago. It seems like it's going to install and then it comes up with a dialog box that says "Apple Mobile Device" failed to start and to verify I have sufficient priveleges. I don't know what I need to do to get it to install.
It seems like it's going to install and then it comes up with a dialog box that says "Apple Mobile Device" failed to start and to verify I have sufficient priveleges.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
A required application library failed to load and the product cannot continue
Seems like I go through this problem time and again with Photoshop + Acrobat CS2 and still have yet to resolve a way of fixing it short of completely wiping my drive and re-installing Windows (XP Pro) The error is "application library failed to load and the product cannot continue"
If there is anyone out there that has figured out a way to fix this issue please fill me in.
This time I went as far as a complete and though removal of all Adobe products from the system and the registry and then completely reinstalled the product.
I have forgone purchasing CS3 because of this issue as I am 99% sure that it has still not been resolved.
Basically Photoshop and Acrobat are useless at this point and I am using an old version of Picture Publisher and Macromedia Fireworks to complete my work. This I assume is good advertising for Adobe :)
Anyone have any ideas????
See this post in the forum "could not complete your request because of a program error", PDF format, cs2, xp" as this is an ongoing Adobe issue that they have completely blown off!
I am working on
Adobe Photoshop Version: 9.0.2 (9.0.2x296)
Operating System: Windows XP
Version: 5.1 Service Pack 2
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading
Physical processor count: 1
Processor speed: 2798 MHz
Built-in memory: 2559 MB
Free memory: 1812 MB
Memory available to Photoshop: 1758 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: XXXXXXXXXXXXXXXXXX (I have a legal copy)
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS2\
Temporary file path: C:\DOCUME~1\JIMSHE~1\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 128.0G, 65.5G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS2\Plug-Ins\
Additional Plug-ins folder: not set
Installed plug-ins:
ADM 3.10x21
ASDStrm 1.03x2
Accented Edges 9.0
Angled Strokes 9.0
Average 9.0 (9.0x196)
BMP 9.0 (9.0x196)
Bas Relief 9.0
Camera Raw 3.7
Chalk & Charcoal 9.0
Charcoal 9.0
Chrome 9.0
Cineon 9.0 (9.0x196)
Clouds 9.0 (9.0x196)
Color Halftone 9.0 (9.0x196)
Colored Pencil 9.0
CompuServe GIF 9.0 (9.0x196)
Conditional Mode Change 9.0 (9.0x196)
Contact Sheet II 9.0 (9.0x196)
Conté Crayon 9.0
Craquelure 9.0
Crop and Straighten Photos 9.0 (9.0x196)
Crop and Straighten Photos Filter 9.0 (9.0x196)
Crosshatch 9.0
Crystallize 9.0 (9.0x196)
Cutout 9.0
Dark Strokes 9.0
De-Interlace 9.0 (9.0x196)
Difference Clouds 9.0 (9.0x196)
Diffuse Glow 9.0
Displace 9.0 (9.0x196)
Dry Brush 9.0
Embed Watermark 1.70.19
Export Transparent Image 9.0 (9.0x196)
Extract 9.0 (9.0x196)
Extrude 9.0 (9.0x196)
FastCore Routines 9.0 (9.0x196)
Fibers 9.0 (9.0x196)
Film Grain 9.0
Filmstrip 9.0 (9.0x196)
Filter Gallery 9.0
Fit Image 9.0 (9.0x196)
Fresco 9.0
Generic EPS 9.0
Glass 9.0
Glowing Edges 9.0
Grain 9.0
Graphic Pen 9.0
HDRMergeAlign 9.0x001
HDRMergeUI 9.0x001
Halftone Pattern 9.0
Ink Outlines 9.0
Lens Blur 9.0
Lens Correction 9.0
Lens Flare 9.0 (9.0x196)
Lighting Effects 9.0 (9.0x196)
Liquify 9.0
MMXCore Routines 9.0.1 (9.0.1x289)
Merge to HDR 1.0x001
Mezzotint 9.0 (9.0x196)
Mosaic Tiles 9.0
Multiprocessor Support 9.0 (9.0x196)
NTSC Colors 9.0 (9.0x196)
Neon Glow 9.0
Note Paper 9.0
Ocean Ripple 9.0
OpenEXR 9.0 (9.0x196)
PCX 9.0 (9.0x196)
PNG 9.0 (9.0x196)
PNG Icons 1.22x1
Paint Daubs 9.0
Palette Knife 9.0
Patchwork 9.0
Paths to Illustrator 9.0 (9.0x196)
Pattern Maker 9.0 (9.0x196)
Photo CD 9.0 (9.0x196)
Photocopy 9.0
Photomerge 9.0 (9.0x196)
PhotomergeCylmap 9.0 (9.0x196)
PhotomergeRender 9.0 (9.0x196)
PhotomergeUI 9.0 (9.0x196)
Picture Package 9.0 (9.0x196)
PictureJohn,
foud your message very helpfull. I experience the same problem when strating a CS2 program (Photoshop, Indesign,...) over a terminal server connection.
It's weird because starting more than one instance is possible (despite what's written in the article ) as long as the users have administrative rights. I've encountererd this problem because my daughter of 11 wants to use Photoshop now. I have a terminal server set up so the kids may experiment with their own desktops whithout the risk to screw it up and because I can access all my programs from wherever I want.
But as I found out now I must buy volume licensing instead of retail (even if it's for just one instance...)
Want to know if possible how "difficult" it was to change your retail to a volume licensed version? Did you have to pay the full amount again? Hope an upgrade exist from Creative Suite CS2 - retail to Creative suite CS3 - volume licensed for the same price as from retail to retail... Or am I hoping to much?
Kind regards and thanks for your info,
Patrick -
Pod Touch 32GB MTP USB device has failed to install and can't sync.
After updating iTunes on my Win7 64bit PC, when I plug my iPod Touch 32GB in, I get the error message "MTP USB device has failed to install" and can't sync. Yesterday, everything worked well.
Need help, please!Thank you. I removed iTunes, QT, Safari and related software, then applied a Windows update and reinstalled iTunes and related software. It solved my problem and let me sync my iPod.
Thanks! -
How to find out the failed sql command and its data from DEFERROR
Hi,
has anybody a procedure or some other possibilities to read the content of column USER_DATA of the advanced replication view DEFERROR in order to find out the failed sql command and its column values?
Thanks in advance.Hi Vishwa,
The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
CASE iv_property.
WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
rv_value = 'EXAMPLE'.
Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
This is a huge topic and i have just mentioned you basic things.
Regards,
Bharathy. -
PE dism error - failed to get and initialize the PE provider
This all started with: Win 8.1 could not be installed. error code 0X8007003. I ran DISM successfully with the /RestoreHealth flag, but it made no difference to installing Win 8.1. I ran DISM again (successfully) and looked at the log for "fails".
The repeated fail was:
2011-06-10 10:12:47, Warning DISM DISM Provider Store: PID=2552 Failed to Load the provider: C:\Users\ROSMAR~1\AppData\Local\Temp\0709052E-4C8D-43AD-B837-FB57E1CF832A\PEProvider.dll.
- CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2011-06-10 10:12:47, Info DISM DISM Provider Store: PID=2552 Failed to get and initialize the PE Provider. Continuing by assuming that it
is not a WinPE image. - CDISMProviderStore::Final_OnConnect
How can I fix this? Is this the reason I can't install Win 8.1? Should I be looking at something else to fix whatever is generating error code 0X8007003?
Thanks.WIM format changed in Win 8.1. You need to use the DISM from the ADK from Windows 8.1. Older versions of DISM cannot service drivers or packages for example.
-
I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services. I do not know what to do. I am the only user on my HP Pavillion laptop. Help!
Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
I got an answer and I replied with a question about the answer, does no show in unanswered
I got an answer and I replied with a question about the answer, does no show in unanswered questions. I guess replying was not the way to get another anwer, How do I do that?
He said - Certain Firefox problems can be solved by performing a Clean reinstall. This means you remove Firefox program files and then reinstall Firefox.
I want to know - Will I still have my bookmarks, history, addons, plugins, etc.? I do not know what plugins and such that I had. What about my pinned tabs and my tabs that where open.
More information - When I try to start Firefox I keep getting the message that I need to restart my computer in order to complete a previous update attempt. I had Sweetpacks on my PC and I do not know where it came from, it took over my home page in Internet Explorer and Ithink caused the issue with Firefox.
Should I do the clean install or try starting Firefox now.Could you please stay in the thread where you posted the question and reply there instead of opening a new thread?
Locking this thread, so please continue here:
*[[/questions/968194]]
See also:
*[[/questions/968222]]
You won't lose bookmarks and other data in the Firefox profile folder as long as you do not remove personal data in case you uninstall Firefox.
See also:
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/kb/Backing+up+your+information
You can open the Properties of the Firefox desktop shortcut via the right-click context menu and check the "Compatibility" tab.<br />
Make sure that all items are deselected in the "Compatibility" tab of the Properties window. -
Hello, i'm trying to download the new verison of itunes, and im getting an error message: Apple mobile failed to start and c;runtime failed. how can i fix this issue
Hi Tatilopez86,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden
Maybe you are looking for
-
About Installaton issues with plug-in - OS10.5.2
Hi all, I can't install the plug in for my E65 on my macbook, running 10.5.2 - latest update as per feb the 19th. iSync is as well up to date. The icon of my HDD is red crossed checked. And I receive a message informing me that ' Imust update iSync'.
-
I can't use Adobe, a box comes up saying i need to unistall the product then reinstall
I can't use Adobe, a box comes up saying i need to unistall the product then reinstall
-
20+ years of hassle-free Apple, now I buy the Time Capsule. Six hours and counting and I'm still not set up. Finally have it recognized as my base station, and the internet working, but Time Machine is asking for my "User name and password". Is this
-
Installed correctly but getting error messages
I have followed the installation instructions and the program seems to be installed correctly but on some webpages I get error messages on popups. At first I thought it might just be the website, but they pop up on other sites as well. I grabbed a
-
Migrating from FCP/Mac to a Premiere/Windows: looking for a primer on codecs
I'm a long time FCP7 user, and I've just decided to migrate to Premiere. Having just a assembled a quite decent PC system, I'm not quite lost regarding codecs. Being very used to ProRes on Apple systems, which is quite frankly the standard and go-to