Failed Windows Server 2003 Enterprise SP2 to Windows 2008 Enterprise OS Upgrade

Attempted to upgrade the OS on our Primary Domain Controller which is running Windows Server 2003 Enterprise with Service Pack 2 installed on a HP ProLiant DL360 G4P Server with 2GB of ram, 3.2 GHz Processor and 53.2 GB of free space on C.  I took
the following steps prior to attempting upgrade.
1. Determined that Server meet the minmum requirements for upgrade.
2. Installed all Windows Updates.
3. Uninstalled McAfee Virus Scan Enterprise Application
4. Backed Up and Imaged Primary Domain Controller.
5. Tested Domain Replication to ensure Primary and Backup Domain Controllers were communicating with each other.
6. Set Domain Function Level at Windows Server 2003
7. Placed ADPREP folder on C:\ on Primary Domain Controller and ran "adprep /forestprep" and "adprep /domainprep" successfully
8. In the C:\Windowd\System32 renamed the WindowsPowerShell application folder to WindowPowerShell-Old, the application failed the Upgrade compatibility test.
Loaded the DVD: "Windows Server 2008 for Enterprise, Standard and Datacenter 32bit Edition", ran installation in upgrade mode to preserve existing settings and software.  The Ugrade ran to last step, application install and failed at
26% complete with the following errror message:
"Windows installation encountered an error and cannot continue. Your computer will now restart and your previous version of windows will be restored"
My questions are why did the upgrade fail?  What can we do to ensure the upgrade will succeed next time?
I have incuded the Setuperr.log below.
2014-08-24 08:48:27, Error      [0x08081e] MIG    Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException:  hResult = 0x0, Line = 2, Position = 134;
void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
2014-08-24 08:48:30, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:30, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:30, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:35, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:35, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:35, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:35, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:35, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:35, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:35, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:35, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:35, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:58, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:58, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:58, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:58, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:58, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:58, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:58, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:58, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:59, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:59, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:59, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:59, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:59, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:59, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:59, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:59, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:59, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:59, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:59, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:59, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:18, Error      [0x08071d] MIG    CDownlevelOCStore::GetOCCollection, Failed to load C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man.: class UnBCL::XmlException:  hResult = 0x0, Line
= 2, Position = 134; . .
void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
2014-08-24 08:49:22, Error      [0x08081e] MIG    Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException:  hResult = 0x0, Line = 2, Position = 134;
void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
2014-08-24 09:13:05, Error      [0x080792] MIG    COCEventTracing::COCEventTracing Failed to call StartTrace 87.[gle=0x00000057]
2014-08-24 09:14:26, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:26, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:30:13, Error      [0x060005] IBS    CallBack_StampRequiredDrives:An error occurred while fixing paths on black board GLE is [0x0]
2014-08-24 09:30:13, Error      [0x064188] IBSLIB RollbackReinitialize: threw exception.: class UnBCL::ArgumentException: Directory "X:\$WINDOWS.~BT\Sources\Rollback" doesn't exists..
__thiscall OSRollbackService::CCheckpointImpressario::CCheckpointImpressario(const unsigned short *,class OSRollbackService::CCheckpointSequence *,int)
[gle=0x00000003]
2014-08-24 09:33:19, Error      [0x0804b3] MIG    CMigWorkingDirHelper::CMigWorkingDirHelper() failed.: class UnBCL::DirectoryNotFoundException: root of directory to create not found.
class UnBCL::DirectoryInfo *__stdcall UnBCL::Directory::CreateDir(const class UnBCL::String *)
[gle=0x00000003]
2014-08-24 09:33:19, Error      [0x0802fa] MIG    MigStartUp caught exception: class UnBCL::DirectoryNotFoundException: root of directory to create not found.
__thiscall Mig::CMigWorkingDirHelper::CMigWorkingDirHelper(class UnBCL::String *)
__thiscall Mig::CMigWorkingDirHelper::CMigWorkingDirHelper(class UnBCL::String *)
class UnBCL::DirectoryInfo *__stdcall UnBCL::Directory::CreateDir(const class UnBCL::String *)
[gle=0x00000003]

Hi,
Here are some limitation of upgrading:
Upgrading is supported from x86-based and x64-based computers, but cross-architecture upgrades are not supported. 
Cross-language upgrades are not supported.
Upgrading from Windows Server 2003 to a Server Core installation of Windows Server 2008 is not supported.
We cannot upgrade the failover clusters from Windows Server 2003 to Windows Server 2008. Before upgrading, we must uninstall failover clustering.
For detailed information about Upgrading to Windows Server 2008, please refer to the link below,
http://technet.microsoft.com/en-us/library/cc755199(v=WS.10).aspx#BKMK_Supported
Besides, to confirm that it isn't an IO issue, could you please try to copy the DVD to the local disk?
If error occurs, it may be an IO issue.
Best Regards.
Steven Lee
TechNet Community Support

Similar Messages

  • Windows Server 2003 R2 Sp2 Italian Language

    Hi,
    I have a big problem with installation of endpoint security. I installed it on a windows server 2003 R2 sp2 with italian languages and it dosn't works. I read in a post that italian languages is not supported but you are working for a fix. There are news?I need a quickly help to solve this problem!
    Thank you

    Hi there,
    There's a release planned in the near term. However, I don't know for sure if that will include localization as a priority. Have you suggested an enhancement request through http://www.novell.com/enhancement_request/ for getting this fixed?
    If you need to quickly resolve this, maybe you can setup an english (or another supported OS Language) server running into a VM inside a server with italian language and you can make that a temporary install meanwhile italian localization is done.
    >>>
    From: fgastald<[email protected]>
    To:novell.support.zenworks.endpoint-security-management
    Date: 1/14/2009 1:56 PM
    Subject: Windows Server 2003 R2 Sp2 Italian Language
    Hi,
    I have a big problem with installation of endpoint security. I
    installed it on a windows server 2003 R2 sp2 with italian languages and
    it dosn't works. I read in a post that italian languages is not
    supported but you are working for a fix. There are news?I need a quickly
    help to solve this problem!
    Thank you
    fgastald
    fgastald's Profile: http://forums.novell.com/member.php?userid=8611
    View this thread: http://forums.novell.com/showthread.php?t=356754

  • Hyper-V VM Windows Server 2003 R2 SP2 Network Problems

    Hi Guys,
    I am trying to setup a new VM in my lab (I am using windows 8.1 in my host)  with Windows Server 2003 R2 SP2. I already installed the integration services in that VM, the network adapter is ok (Hyper-V network adapter). Well, everything it seems to be
    ok, but my W2K3 Machine keeps getting 169.xxx ip. My host is wireless , the virtual switch is ok, since I have other 4 VM (W2K8, W2K8R2, W2012, W2012R2) working fine with that switch and having access to the internet, just this VM with W2K3 is not working. 
    Do you guys can help ?
    Thanks

    Please check the properties of your NIC adapter in W2K3 if the Client for Microsoft Network is installed.
    And also try to compare the network setting for other VMs NICs in Hyper-V to find the deference.
    I would create new VM and install clean W2K3 for testing.
    If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY
    suggestion in a test environment before implementing!

  • Windows server 2003 64bit SP2 get error

    Hi all,
    When I login my Windows server 2003 64bit SP2, i got an error "Generic Host Process for Win32 Services encountered a problem and needed to close.", I click to see error code infomation and I see below info:
    szAppName : svchost.exe     szAppVer : 5.2.3790.3959     
    szModName : netapi32.dll     szModVer : 5.2.3790.3959     
    offset : 000000000001e626
    Please help me to fix it.
    Thanks and Best Regard.

    This one might help.
    http://support.microsoft.com/kb/931852/en-us
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Issues with creating PDF's (Acrobat 8.1.6. and 9.1.3) in Windows Server 2003 (32 bit) and Windows XP (64bit)

    We have a report package that generates customised reports
    We generate the PDF's by simply "printing" to the Adobe PDF printer
    In Windows XP Pro (32 Bit) the report creates the PDF perfectly
    In Windows Server 2003 (32 Bit) or Windows Xp Pro (64 Bit) the PDF is created 90% perfect but some of text has slipped on the page.
    Whilst we are looking into the report writer (Dev Express) I would like to rule out any Acrobat issues.
    With thanks
    Mark

    I think it will work fine if you use the "Enterprise" authentication option.  It may have dependencies on 32 bit components.  So, that's why we must run IIS in 32 bit mode even though it's on a 64 bit OS.  That means CR supports 64 bit OS systems only if you bring down other components that CR uses to 32 bit levels.  I'm not sure if that is considered "full support". 
    We are trying to use the LDAP authentication option, but that tab is disabled.  Other tabs such as Active Directory and WinNT are disabled as well.  There maybe another component that we must bring down to 32 bit processing.
    Is there a way to enable the LDAP authentication configuration tab?
    thanks

  • Upgrading windows server 2003 domain controller to windows server 2008

    Hello friedns :
    We have a company with about 2000 users , and two windows server 2003 domain controllers , one of them acts as a primary domain controller , and the other acts as secondary domain controller , all the FSMO s are on the primary DC ,we have decided to upgrade all of our servers from windows server 2003 to windows server 2008 , the first step is to upgrade the domain controllers to windows server 2008 , our domain controllers are so sensitive and has to be active 24 hours a day , i have stress upgrading it to windows server 2008 , what is the best solution to upgrade it with no risk ?
    ( i have an opinion but i am not sure and i dont have any guide about it , i want to install a windows server 2008 and promote it as an additional domain controller to the windows server 2003 DC and the transfer all the FSMOs to it , and then promote the first domain controller !!! is that possible ? if yes , is there any guide about it? )
    If there is a guide available for it please let me know . (Specially if there is a tip & trick)
    thank you guys.
    Network is my LOVE

    Hi,
    This TechNet online article might be helpful for you.
    How to Upgrade Domain Controllers to Windows Server 2008 or Windows Server 2008 R2
    http://technet.microsoft.com/en-us/library/ee522994(WS.10).aspx
    For your convenience, I have list some general steps for your reference.
    Since the following operation have potential damage to Active Directory database, it is highly suggested that you'd better perform a full backup of Active Directory (System State) firstly. Also it is better to test the following procedure in a similar lab environment first.
    General Steps:
    =============
    1. Verify the new server's TCP/IP configuration has been pointed to the current DNS server.
    2. Make the new server become a member server of the current Windows Server 2003 domain first.
    3. Upgrade the Windows Server 2003 forest schema to Windows Server 2008 schema with the "adprep /forestprep" command on old server.
    Please run the "adprep.exe /forestprep" command from the Windows Server 2008 installation disk on the schema master. To do this, insert the Windows Server 2008 installation disk, and then type the following command:
    Drive:\sources\ADPREP\adprep.exe /forestprep
    4. Upgrade the Windows 2003 domain schema with the "adprep /domainprep" command on old server.
    Please run the "adprep.exe /domainprep" command from the Windows Server 2008 installation disk on the infrastructure master. To do this, insert the Windows Server 2008 installation disk, and then type the following command:
    Drive:\sources\ADPREP \adprep.exe /domainprep
    5. Insert Windows Server 2008 Installation Disc in the new server.
    6. Run "dcpromo" on new server to promote it as an additional domain controller in existing Windows 2003 domain, afterwards you may verify the installation of Active Directory.
    Please refer to:
    How to Verify an Active Directory Installation in Windows Server 2003
    http://support.microsoft.com/kb/816106
    7. Verify the new server's TCP/IP configuration has been pointed to current DNS server.
    8. Enable Global Catalog on new server and manually Check Replication Topology and afterwards manually trigger replication (Replicate Now) to synchronize Active Directory database between 2 replicas.
    Please note: It will some time to replicate GC between DC, please wait some time with patience.
    9. Disable Global Catalog on the old DC.
    10. Transfer all the FSMO roles from the old DC to the new DC.
    Please refer to:
    How to view and transfer FSMO roles in Windows Server 2003
    http://support.microsoft.com/kb/324801
    11. Verify that the old DNS Server Zone type is Active Directory-Integrated. If not, please refer to:
    How To: Convert DNS Primary Server to Active Directory Integrated
    http://support.microsoft.com/kb/816101
    Note: Active Directory Integrated-Zone is available only if DNS server is a domain controller.
    12. Install DNS component on new server and configure it as a new DNS Server (Active Directory Integrated-Zone is preferred). All the DNS configuration should be replicated to the new DNS server with Active Directory Replication.
    13. Make all the clients change TCP/IP configuration to point to new server as DNS.
    14. You may configure TCP/IP on all the clients, or adjust DHCP scope settings to make them use the new DNS server.
    Please note: It is a good practice to make the old DC offline for several days and check whether everything works normally with the new server online. If so, you may let the old DC online and run DCPROMO to demote it.
    Hope it helps.
    Regards,
    Wilson Jia
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • KB2898860 & KB2901115 Windows Update Fail on Server 2003 Std SP2

    he following updates fail to install on a Windows Server 2003 Standard Edition SP2 file server.
    Security Update for Microsoft .NET Framework 1.1 SP1 on Windows Server 2003 and Windows Server 2003 R2 x86 (KB2901115)
    Security Update for Microsoft .NET Framework 1.1 SP1 on Windows Server 2003 and Windows Server 2003 R2 x86 (KB2898860)
    KB2901115 log
    0.453: 2014/03/12 08:22:46.429 (local)
    0.453: C:\WINDOWS\SoftwareDistribution\Download\9d53f804e0198422c019c40c49b12668\update\update.exe (version 6.3.4.1)
    0.453: Failed To Enable SE_SHUTDOWN_PRIVILEGE
    0.453: Hotfix started with following command line: -q -z -er /ParentInfo:5a4383affe66c049ae6dc7084f9ad5a2 
    0.453: In Function GetBuildType, line 1170, RegQueryValueEx failed with error 0x2
    0.453:  Exec SP1QFE.SP1Check.Section: Result SOFTWARE\Microsoft\NET Framework Setup\NDP\v1.1.4322 Key Not Found 
    0.453: Condition Check for Line 1 of PreRequisite returned FALSE 
    0.469: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.469: KB2901115 Setup encountered an error:  Setup cannot continue because one or more prerequisites required to install KB2901115 failed. For More details check the Log File c:\windows\KB2901115.log
    0.469: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.469: Setup cannot continue because one or more prerequisites required to install KB2901115 failed. For More details check the Log File c:\windows\KB2901115.log
    0.469: Update.exe extended error code = 0xf0f4
    KB2898860.log
    0.359: 2014/03/12 08:22:46.929 (local)
    0.359: C:\WINDOWS\SoftwareDistribution\Download\796443382934bf8f75f7c098c5fe7023\update\update.exe (version 6.3.4.1)
    0.359: Failed To Enable SE_SHUTDOWN_PRIVILEGE
    0.359: Hotfix started with following command line: -q -z -er /ParentInfo:549ffa455131174dba2210fe16739168 
    0.359: In Function GetBuildType, line 1170, RegQueryValueEx failed with error 0x2
    0.359:  Exec SP1QFE.SP1Check.Section: Result SOFTWARE\Microsoft\NET Framework Setup\NDP\v1.1.4322 Key Not Found 
    0.359: Condition Check for Line 1 of PreRequisite returned FALSE 
    0.359: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.359: KB2898860 Setup encountered an error:  Setup cannot continue because one or more prerequisites required to install KB2898860 failed. For More details check the Log File c:\windows\KB2898860.log
    0.359: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
    0.359: Setup cannot continue because one or more prerequisites required to install KB2898860 failed. For More details check the Log File c:\windows\KB2898860.log
    0.359: Update.exe extended error code = 0xf0f4
    I would really appreciate any help on this matter.
    Kind Regards
    Chris

    From the logfiles you supplied, it appears that SP1 for .NET FW 1.1 is missing.
    These security updates will not install if you don't have SP1 for .NET FW 1.1 installed.
    Check this KB article on information about how to verify if SP1 for .NET FW 1.1 is installed, how to get SP1 for .NET FW 1.1, etc
    http://support.microsoft.com/kb/867460
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Crystal Reports 9 and Windows Server 2003 sp1/sp2

    Post Author: jnribeyrol
    CA Forum: General
    Hello,
    due to security updates in my company, we have to upgrade from Windows Server 2003 to sp1 or sp2.
    I haven't been able in the support to find out if there was any problem with Report Access Server on these SPs.
    Can somebody help me.
    regards

    CR XI is past it's end of life. You can upgrade to CR XI R2 for free.
    Go to: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
    Typically this is due to DEP, search forums for more info on how to configure it as well as your Anti-virus and/or Firewall may be stopping CR from running. You also need full Admin rights to install all components.
    Thank you
    Don

  • Migrating MOSS from windows server 2003 x64 sp2 to 2008 R2

    Dear All,
    I can't find too much data supporting this issue
    all articles says restore farm / migrate IIS / copy and replace 12 hives
    I don't believe this is so practical
    I need more in depth details like how IIS will be migrated [Should I use web deployment tools]
    what about customized solution that modifies the web.config file and deployed as farm solutions will IIS migration tool override the changes on it
    Thanks for help

    I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
    I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
    message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
    I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.  
    I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder. 
    I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
    driver' when installing the HP 855c.
    I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
    message (probably the same one mentioned above).
    ; NTPRINT.INF (for Windows Server 2003 family)
    ; List of supported printers, manufacturers
    [Version]
    Signature="$Windows NT$"
    Provider=%MS%
    ; LayoutFile=layout.inf
    ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
    Class=Printer
    DriverVer=10/01/2002,5.2.3790.4533
    [ClassInstall32.NT]
    AddReg=printer_class_addreg
    [printer_class_addreg]
    HKR,,,,%PrinterClassName%
    HKR,,Icon,,"-4"
    HKR,,Installer32,,"ntprint.dll,ClassInstall32"
    HKR,,NoDisplayClass,,1
    HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
     Good luck

  • Migrating Windows Server 2003 File Cluster to Windows Server 2008 R2

    Hello,
    I have a very large Windows Server 2003 2 node file cluster that I would like to upgrade to Windows 2008 R2. I need to do this inplace (same server hardware) and I would like to use the existing storage if possible (I could buy more if it would make things
    easier).
    Is there a step by step guide that can tell me how to do this upgrade inplace or can anyone give me details on how to do this? I've looked at a few articles and they are not very descriptive on what to do.

    What Microsoft calls an inplace upgrade is option 2 below
    There are two basic migration/upgrade methods for a 2003 cluster to 2008
    1) Build on new hardware, and move the disk/migrate the data. 
    2) Break cluster and remove one node, use that node to build a new one node cluster.  Repeat by removing nodes and adding to new cluster.
    Here is the MS Step-by-step guide for both of these approaches.
    http://technet.microsoft.com/en-us/library/cc754481(WS.10).aspx

  • Slow work Oracle 10gR2 on Windows server 2003 Standart SP2

    Hi!
    I have a problem when i migrating from my old server to new one..
    Old server:
    Windows 2003 SP2 + Oracle 10gR2
    CPU Pentium 4 2.4
    RAM 2 GB
    DISK 2 x RAID 1 (one for systen and instance another for data files)
    On this system i have disk I/O about 35 - 45 mb per sec.
    New server:
    Windows 2003 SP2 x86 + Oracle 10gR2 x86
    CPU 2 x Xeon Dual Core 1.6
    RAM 4 GB
    DISK 1 x RAID 1(system and instance) 1 x RAID 10 (4 disks SATA) (data files).
    When i create tablespace i have disk I/O (EM) about 35 mb/sec and when i try to load data in my new databae (i am using Data Pump import) i have I/O 1 mb/sec. How can i solve this problem?
    When i runing Sisoft Sandra i get a result ~100mb/sec. But the ORION get me a very small result aproximetly the same as in old server.

    I don't think that this is the place to ask about downloads external to OTN. See forum description. Questions about the patches from Metalink (after searching/reading existing Notes and still not coming up with a definitive answer) should in general be directed to Metalink (e.g. open a SR).
    With that said.. If you are asking on how to retrieve the patch set via Metalink interface, then you should turn to Patches & Updates (one of the main tabs). Use e.g. Simple Search or Quick Links to the Latest... to drill down.
    When you have found a patch set, the Patch Set readme documents system requirements and other vital information.
    If you are looking for other information regarding patches and patching, the first place to look is again Metalink. Certification and supportability information can be found via Certify tab. There are several "tactical" Notes such as 161549.1 and 316900.1 useful for supporting your own procedures and for finding further information.
    Edited by: orafad on Aug 24, 2008 12:39 PM

  • Oracle 10.2.0.1 Standard Edition on Windows Server 2003 R2 SP2 German vers.

    Hi,
    We got a "strange" error installing Oracle db on MS win Ser 2003. When the installation procedure created the database it stopped with Ora-604 and Ora-2248. My first thought was the language problem but I'm not sure.
    Below you'll see the trace.log
    If anyone can give me a clue, it would most appreciated !
    Thanks a lot,
    Jacques
    [main] [12:33:57:652] [CommandLineArguments.process:563] CommandLineArguments->process: number of arguments = 32
    [main] [12:33:57:652] [CommandLineArguments.process:738] CommandLineArguments->process: Create Database argument is specified
    [main] [12:33:57:652] [CommandLineArguments.process:910] CommandLineArguments->process: template Name argument is specified
    [main] [12:33:57:652] [CommandLineArguments.process:960] CommandLineArguments->process: db name argument is specified
    [main] [12:33:57:652] [CommandLineArguments.process:3074] CommandLineArguments->process: in Operation Type is Creation/GenerateScripts Mode condition
    [main] [12:33:57:668] [CommandLineArguments.process:3298] CommandLineArguments->process: Successfully process command line arguments
    [main] [12:33:58:73] [Host.checkOPS:2053] Inside checkOPS
    [main] [12:33:58:73] [Host.checkOPS:2065] Trying to check cluster existence
    [main] [12:33:58:120] [Library.getInstance:95] Created instance of Library.
    [main] [12:33:58:120] [Library.load:195] Loading orauts.dll...
    [main] [12:33:58:120] [Library.load:201] oracleHome D:\Programme\oracle\product\10.2.0\db_1
    [main] [12:33:58:120] [sPlatform.isHybrid:63] osName=Windows 2003 osArch=x86 rc=false
    [main] [12:33:58:120] [Library.load:220] Loading library D:\Programme\oracle\product\10.2.0\db_1\bin\orauts.dll
    [main] [12:33:58:120] [Library.load:244] Loaded library D:\Programme\oracle\product\10.2.0\db_1\bin\orauts.dll from path=
    D:\Programme\oracle\product\10.2.0\db_1\bin
    [main] [12:33:58:136] [Library.load:195] Loading MSVCR71.dll...
    [main] [12:33:58:136] [Library.load:201] oracleHome D:\Programme\oracle\product\10.2.0\db_1
    [main] [12:33:58:136] [sPlatform.isHybrid:63] osName=Windows 2003 osArch=x86 rc=false
    [main] [12:33:58:136] [Library.load:220] Loading library D:\Programme\oracle\product\10.2.0\db_1\bin\MSVCR71.dll
    [main] [12:33:58:136] [Library.load:244] Loaded library D:\Programme\oracle\product\10.2.0\db_1\bin\MSVCR71.dll from path=
    D:\Programme\oracle\product\10.2.0\db_1\bin
    [main] [12:33:58:136] [Library.load:195] Loading orawsec10.dll...
    [main] [12:33:58:136] [Library.load:201] oracleHome D:\Programme\oracle\product\10.2.0\db_1
    [main] [12:33:58:136] [sPlatform.isHybrid:63] osName=Windows 2003 osArch=x86 rc=false
    [main] [12:33:58:136] [Library.load:220] Loading library D:\Programme\oracle\product\10.2.0\db_1\bin\orawsec10.dll
    [main] [12:33:58:136] [Library.load:244] Loaded library D:\Programme\oracle\product\10.2.0\db_1\bin\orawsec10.dll from path=
    D:\Programme\oracle\product\10.2.0\db_1\bin
    [main] [12:33:58:136] [Library.load:195] Loading orasrvm10.dll...
    [main] [12:33:58:136] [Library.load:201] oracleHome D:\Programme\oracle\product\10.2.0\db_1
    [main] [12:33:58:136] [sPlatform.isHybrid:63] osName=Windows 2003 osArch=x86 rc=false
    [main] [12:33:58:136] [Library.load:220] Loading library D:\Programme\oracle\product\10.2.0\db_1\bin\orasrvm10.dll
    [main] [12:33:58:136] [Library.load:244] Loaded library D:\Programme\oracle\product\10.2.0\db_1\bin\orasrvm10.dll from path=
    D:\Programme\oracle\product\10.2.0\db_1\bin
    [main] [12:33:58:136] [Version.isPre10i:189] isPre10i.java: Returning FALSE
    [main] [12:33:58:136] [WindowsSystem.regKeyExists:997] WindowsSystem.regKeyExists: mainkey= HKEY_LOCAL_MACHINE subkey = Software\Oracle\Ocr
    [main] [12:33:58:183] [WindowsSystem.getCSSConfigType:1154] configType=null
    [main] [12:33:58:183] [Host.checkOPS:2071] cluster existence:false
    [main] [12:33:58:183] [Host.checkOPS:2109] Cluster installed=false
    [main] [12:33:58:292] [InitParamHandler.endElement:506] CustomSGA flag: false
    [main] [12:33:58:292] [InitParamHandler.endElement:507] Database Type: MULTIPURPOSE
    [main] [12:33:58:292] [InitParamHandler.endElement:508] Mem Percentage: 40
    [main] [12:33:58:292] [InitParamHandler.endElement:526] distributing Memory: 858993049
    [main] [12:33:58:292] [StorageAttributes.setAttribute:232] IN threadID:1 group#=1
    [main] [12:33:58:292] [StorageAttributes.setAttribute:232] IN threadID:1 group#=2
    [main] [12:33:58:292] [StorageAttributes.setAttribute:241] Current threadID=1
    [main] [12:33:58:308] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
    [main] [12:33:58:308] [StorageAttributes.setAttribute:258] vRedoGroups:[1]
    [main] [12:33:58:308] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
    [main] [12:33:58:308] [StorageAttributes.setAttribute:232] IN threadID:1 group#=3
    [main] [12:33:58:308] [StorageAttributes.setAttribute:241] Current threadID=1
    [main] [12:33:58:308] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
    [main] [12:33:58:308] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[1]=2
    [main] [12:33:58:308] [StorageAttributes.setAttribute:258] vRedoGroups:[1, 2]
    [main] [12:33:58:308] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
    [main] [12:33:58:308] [TemplateManager.parseCloneTemplate:1474] See for any transportable datafiles in TemplateManager.....
    [main] [12:33:58:308] [Host.setupOIDCommandlineParameters:7177] setupOIDCommandlineParameters:
    [main] [12:33:58:308] [Host.setupOIDCommandlineParameters:7178] m_regWithdirService: false
    [main] [12:33:58:308] [Host.setupOIDCommandlineParameters:7179] m_unregWithdirService: false
    [main] [12:33:58:308] [Host.setupOIDCommandlineParameters:7180] m_updateDirService: false
    [main] [12:33:58:308] [Verifier.processRawConfigFile:3523] StorageType == 0
    [main] [12:33:58:308] [Verifier.setOradataDest:4349] setOradataDest:dfDest=D:\Programme\oracle\product\10.2.0\oradata
    [main] [12:33:58:308] [TemplateManager.updateDatafileDestination:1950] updateDatafiles:datafileDir=D:\Programme\oracle\product\10.2.0\oradata
    [main] [12:33:58:308] [TemplateManager.updateDatafileDestination:2096] From template, RedoLogGrName=1
    [main] [12:33:58:323] [TemplateManager.updateDatafileDestination:2111] new file name redo01.log
    [main] [12:33:58:323] [TemplateManager.updateDatafileDestination:2096] From template, RedoLogGrName=2
    [main] [12:33:58:323] [TemplateManager.updateDatafileDestination:2111] new file name redo02.log
    [main] [12:33:58:323] [TemplateManager.updateDatafileDestination:2096] From template, RedoLogGrName=3
    [main] [12:33:58:323] [TemplateManager.updateDatafileDestination:2111] new file name redo03.log
    [main] [12:33:58:323] [ProgressOnlyHost.performOperation:162] processRawConfigFile=false
    [main] [12:33:58:323] [Verifier.validateTemplate:1629] StorageType == 0
    [main] [12:33:58:323] [ProgressOnlyHost.performOperation:178] validateTemplate=true
    [main] [12:33:58:339] [OracleHome.isRacEnabled:147] bRacOn = false
    [main] [12:33:58:354] [Verifier.validateTemplate:1629] StorageType == 0
    [main] [12:33:58:354] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.getControlfFileSizes:3001] No. of Control files:=3
    [main] [12:33:58:479] [Host.executeSteps:4042] Executing steps....
    [main] [12:33:58:479] [Host.setUpForOperation:2918] setUpForOperation: Mode = 128
    [main] [12:33:58:479] [Host.executeSteps:4184] setupForOperation returned: true
    [main] [12:33:58:479] [Host.createStepSQLInterface:5946] sid =Rainbow
    [main] [12:33:58:495] [SQLEngine.getEnvParams:424] NLS_LANG: GERMAN_SWITZERLAND.WE8MSWIN1252
    [main] [12:33:58:495] [SQLEngine.initialize:241] Execing SQLPLUS/SVRMGR process...
    [main] [12:33:58:510] [SQLEngine.initialize:269] m_bReaderStarted: false
    [main] [12:33:58:510] [SQLEngine.initialize:273] Starting Reader Thread...
    [Thread-3] [12:33:58:901] [StepContext$ModeRunner.run:2458] ---- Progress Needed:=true
    [Thread-3] [12:33:59:88] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
    [Thread-3] [12:33:59:88] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
    [Thread-3] [12:33:59:88] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
    [Thread-3] [12:33:59:88] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
    [Thread-3] [12:33:59:88] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
    [Thread-3] [12:33:59:88] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
    [Thread-3] [12:33:59:88] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-3] [12:33:59:88] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
    [Thread-3] [12:33:59:88] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-3] [12:33:59:88] [InitParamAttributes.sortParams:3525] m_sortOn:-1 sortOn:4
    [Thread-3] [12:33:59:244] [OracleHome.isRacEnabled:147] bRacOn = false
    [Thread-3] [12:33:59:244] [Host.noEntryinOratab:5113] Check made for oratab arg passed............
    [Thread-3] [12:33:59:244] [Oradim.getAddEntryCommand:353] AddEntry=[D:\Programme\oracle\product\10.2.0\db_1\bin\oradim.exe, -new, -sid, RAINBOW, -startmode, manual, -spfile]
    [Thread-3] [12:34:0:492] [Oradim.getEditEntryCommand:422] getEditEntry cmd=[D:\Programme\oracle\product\10.2.0\db_1\bin\oradim.exe, -edit, -sid, RAINBOW, -startmode, auto, -srvcstart, system]
    [Thread-3] [12:34:0:680] [Oradim.addSidToRegistry:871] oracleHomeKey: SOFTWARE\ORACLE\KEY_OraDb10g_home1
    [Thread-3] [12:34:0:742] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@898540
    [Thread-3] [12:34:0:742] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
    [Thread-3] [12:34:0:742] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=D:\Programme\oracle\product\10.2.0/flash_recovery_area
    [Thread-3] [12:34:0:742] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
    [Thread-3] [12:34:1:476] [SQLEngine.setSpool:1743] old Spool = null
    [Thread-3] [12:34:1:476] [SQLEngine.setSpool:1744] Setting Spool = D:\Programme\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\Rainbow\CloneRmanRestore.log
    [Thread-3] [12:34:1:476] [SQLEngine.setSpool:1745] Is spool appendable? --> true
    [Thread-3] [12:34:1:476] [CloneRmanRestoreStep.executeImpl:320] starting with pfile=D:\Programme\oracle\product\10.2.0/admin/Rainbow/pfile/init.ora
    [Thread-1] [12:34:4:35] [BasicStep.handleNonIgnorableError:430] oracle.sysman.assistants.util.UIMessageHandler@898540:messageHandler
    [Thread-1] [12:34:4:35] [BasicStep.handleNonIgnorableError:431] ORA-00604: error occurred at recursive SQL level 1
    ORA-02248: invalid option for ALTER SESSION
    :msg
    ************************************************************

    Yes, there's a known problem, not with german language, but with territory Switzerland, see on metalink:
    ORA-604 / ORA-02248 WITH NLS_LANG SET TO TERRITORY SWITZERLAND
    Doc ID: 334481.1
    ORA-02248 is only the last error, you have others:
    StepErrorHandler.setFatalErrors:322 setting Fatal Error: ORA-01092
    Thread-3 12:33:59:88 StepErrorHandler.setFatalErrors:322 setting Fatal Error: ORA-01034
    Thread-3 12:33:59:88 StepErrorHandler.setFatalErrors:322 setting Fatal Error: ORA-03114
    Thread-3 12:33:59:88 StepErrorHandler.setFatalErrors:322 setting Fatal Error: ORA-12560
    Thread-3 12:33:59:88 StepErrorHandler.setIgnorableErrors:250 setting Ignorable Error: ORA-01109
    Not sure whether this related to the same problem. As a workaround you may change the territory, for example to GERMANY. If that works you hit the bug mentioned in the metalink not. Normally NLS_LANG is set in the registry.
    Werner

  • Oracle 9.2.0.3.0 for Windows Server 2003(32-Bit) on Windows 2003 R2 x64

    Hi,
    I had a look at the certification matrix and saw that this combination is not supported by Oracle but I wonder if somebody has this combination up & running?
    Thanks,
    Kris
    Message was edited by:
    [email protected]

    Hmm,
    I think you intend to run such a configuration in production later on. My $0.02: don't even bother. Even if it works, it's not supported by Oracle as you say. The answer to your first SR will be: "We don't support this configuration" and you're really alone.
    Regards,
    Martin

  • Access Denied to report file on Windows Server 2003 Enterprise

    Hi,
    I have a deployment problem for which I am out of ideas. I have an ASP.NET web site deployed on a server running Windows Server 2003 R2, sp2.  It makes extensive use of Crystal Reports, including both displaying them and e-mailing them to specified recipients as PDF files. It all works great.
    Now I need to port the web site to a different server, running Windows Server 2003 Enterprise, sp1. The reports display fine as long as I am not trying to convert it to PDF for e-mailng. When it gets to the following line in my code:
    MemoryStream memStream = (MemoryStream)rptDoc.ExportToStream(ExportFormatType.PortableDocFormat);
    It reports the following error:
    Access denied.Error in File JobDetails {DC64A5D3-9DD7-4E4C-90F5-A08731409B29}.rpt:
    Access to report file denied. Another program may be using it.
    I finally got it to work by granting Modify permission to Everyone for the c:\Windows\Temp folder. Obviously this is not a good practice.  Granting Full Control  to the IUSR_servername account did not solve the problem on Windows Server Enterprise, although it did the trick on R2.
    So the question is, which account needs which permission to the Temp folder to enable the PDF to get written?
    Thanks.
    Dan

    What ever account the app is running under will need read / write permissions on the temp folder. Your working server should be a good place to look to see how the premissions were set there. The same will apply to any other server(?).
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • HELP on OBIEE and Hyperion BI on same Windows Server 2003 x64 machine

    Hi everyone,
    I am having problems when installing OBIEE 11G and Hyperion BI on the same machine.
    The problem seems to be Weblogic crashing and not being able to have both of these products on the same machine. Only either one will work.
    Details:
    Steps involved:
    1. Install
    Windows Server 2003 x64 SP2
    2. Install
    SQL Server 2005 x64 SP3
    3. Install Hyperion 11.1.2 for 64bit Modules:
    - Foundation
    - EPMA
    - Calculation Manager
    - Essbase
    - Planning
    4. Configure Hyperion Modules using DB SQL Server 2005 x64
    5. Install and Configure using DB SQL Server 2005 x64
    Oracle RCU for 64bit
    6. Install Oracle BI for 64bit and Configure using DB SQL Server 2005 x64
    Result:
    Fails to start services for either Hyperion Products or Oracle BI.
    Anyone can provide correct steps?

    I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
    I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
    message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
    I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.  
    I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder. 
    I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
    driver' when installing the HP 855c.
    I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
    message (probably the same one mentioned above).
    ; NTPRINT.INF (for Windows Server 2003 family)
    ; List of supported printers, manufacturers
    [Version]
    Signature="$Windows NT$"
    Provider=%MS%
    ; LayoutFile=layout.inf
    ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
    Class=Printer
    DriverVer=10/01/2002,5.2.3790.4533
    [ClassInstall32.NT]
    AddReg=printer_class_addreg
    [printer_class_addreg]
    HKR,,,,%PrinterClassName%
    HKR,,Icon,,"-4"
    HKR,,Installer32,,"ntprint.dll,ClassInstall32"
    HKR,,NoDisplayClass,,1
    HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
     Good luck

  • HT203175 How do I install iTunes on Windows Server 2003?!? I get an error every time!!

    I am having trouble installing any version of ITunes 10.5 or later
    on my Windows 2003 Server PC. I receive the following error
    every time I try to install it...
    "Apple Mobile Device Support requires that your computer is running Windows XP SP2 or newer"
    I anyone has had this same problem I would appreciate any help!!!
    Thank you!!!

    I've googled my problem with many hits stating Itunes can indeed be installed
    by making changes to the msi packages and I believe a few
    registry hacks. It sounds like it can be done, but before experimenting with
    those suggestions I thought looking to the Apple community on the official site
    might glean a better remedy.
    I'm just surprised Apple doesn't support any Windows Server applications
    even though Windows Server 2003 came out after Windows XP,
    (Server 2003 - 2003____XP - 2001)

Maybe you are looking for