Failed worker while applying one patch

Hi All,
I was applying one patch and during the process, a worker stopped with some error. After inspecting the worker log, I raised a Service Request with Oracle Support and support has recommended to apply another patch. Now what should I do?
1) Can I start another patch session, apply the new patch and then proceed with the failed patch session?
2) Should I terminat the existing failed patch session, apply the new patch and restart the whole process of applying the failed patch?
Please suggest, what is the general practice.
Thanks
SR

1) Can I start another patch session, apply the new patch and then proceed with the failed patch session?
2) Should I terminat the existing failed patch session, apply the new patch and restart the whole process of applying the failed patch?
Below is the general practice is we do.
How to Apply an 11i Patch When adpatch is Already Running - Note:175485.1
Regards,
Satya.

Similar Messages

While applying the patch getting an error Failed:xdoloader.class on worker

Hi,
While applying the patch getting an error Failed:xdoloader.class on worker

While applying the patch getting an error Failed:xdoloader.class on workerPlease post the details of the application release, database version and OS.
What is the patch number you are trying to apply?
Please post the complete error message from adpatch log file.
Thanks,
Hussein

Error : While applying the Patch 4440000

Error : While applying the Patch 4440000
FAILED: file igwprop.odf on worker 1 for product igw username IGW.
When i check the worker log file i got this error
The sequence IGW_AWARDS_S in the database is defined as:
MINVALUE = 1 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
which should be defined as:
MINVALUE = 10000 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
(Note: The cache value for sequence IGW_AWARDS_S is 20 in the ODF file. The value 1000 is being used instead because this provides better performance when selecting from the sequence.)
Alter the sequence with :
Start time for statement below is: Sun Oct 06 2013 22:16:28
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
The following ORACLE error:
ORA-04007: MINVALUE cannot be made to exceed the current value
occurred while executing the SQL statement:
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
Unable to compare or correct sequences
because of the error above
Time when worker failed: Sun Oct 06 2013 22:16:28
plz help me in solving this.

Check the current value of IGW_AWARDS_S sequence and make sure the MINVALUE in the patch (i.e. 10000) is not greater than the current one.
OERR: ORA 4007 MINVALUE cannot be made to exceed the current value (Doc ID 19824.1)
You may also log a SR.
Thanks,
Hussein

Opatch error while applying Windows patch 6 (9.2.0.8.0) on EBS 11i Database

Hi,
I am upgrading our EBS 11i database (9.2.0.5.0) to 9.2.0.8.0 by following note : 216550.1 (Interoperability Notes Oracle Applications Release 11i with Oracle9i Release 2 (9.2.0)).
I have installed Opatch 2617419 and then installed 6880880 (p6880880_101000_WINNT.zip) (OUI patch).
While applying Windows patch 6 (5916268) ,using opatch I am getting the following error:
OPATCH_JAVA_ERROR=OPatch Exception while trying to check for Mini Patchset
Cannot check bug/file conflict and component prerequisite checks.
ERROR: OPatch failed during prerequisite check.
OPatch returns with error code = 150
Any help to resolve the issue is appreciated.
I saw note +'OPATCH_JAVA_ERROR=OPatch Exception While Trying to Check for Mini Patchset' while applying patch using opatch 1.0.0.0.x [ID 971783.1].+
There are no '&' in the inventory file. There are a lot of '<'. I dont know if this note is applicable.
Thanks
Thiru.

Hi,
I am following section 2 only.
In Section 2, # 7 we have to apply latest Oracle Patching Tool (OPatch) patch 2617419 and in # 8 we have to apply additional 9.2.0.8 RDBMS patches ( in our case it is Windows patch 6.
I am getting issue while applying Windows patch 6 using opatch.
Rgds,
Thiru

Problems while applying Manifest Patch on Linux - 11.5.10 CU2

Hi,
We're migrating our Application Tier (11.5.10 CU2) from HP-UX 11.23 to Linux RedHat 5 (32 Bits).
While applying Manifest Patch , I've got the the following Error Messages :
Starting link of rg executable 'RGSSRQ' on Wed Jan 12 16:21:41 IST 2011
gcc -s -L/nerp/release11i/ora_top/8.0.6/lib -L/nerp/release11i/ora_top/8.0.6/lib/stubs -ldl -o /nerp/release11i/appl_top/rg/11.5.0/bin/RGSSRQ /nerp/release11i/appl_top/rg/11.5.0/lib/rgssrq.o \
/nerp/release11i/appl_top/rg/11.5.0/lib/librg.a /nerp/release11i/appl_top/fnd/11.5.0/lib/libfnd.a /nerp/release11i/appl_top/gl/11.5.0/lib/libgl.a -lsql /nerp/release11i/ora_top/8.0.6/lib/nautab.o /nerp/release11i/ora_top/8.0.6/lib/naeet.o /nerp/release11i/ora_top/8.0.6/lib/naect.o /nerp/release11i/ora_top/8.0.6/lib/naedhs.o `cat /nerp/release11i/ora_top/8.0.6/lib/naldflgs` -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /nerp/release11i/ora_top/8.0.6/lib/sysliblist` -ldl -lpthread -lm /nerp/release11i/ora_top/8.0.6/rdbms/lib/defopt.o /nerp/release11i/ora_top/8.0.6/rdbms/lib/ssbbded.o
/usr/lib/gcc/i386-redhat-linux/4.1.2/../../../crt1.o: In function `_start':
(.text+0xc): undefined reference to `__libc_csu_fini'
/usr/lib/gcc/i386-redhat-linux/4.1.2/../../../crt1.o: In function `_start':
(.text+0x11): undefined reference to `__libc_csu_init'
collect2: ld returned 1 exit status
make: *** [nerp/release11i/appl_top/rg/11.5.0/bin/RGSSRQ] Error 1
Done with link of rg executable 'RGSSRQ' on Wed Jan 12 16:21:41 IST 2011
Relink of module "RGSSRQ" failed.
-> All the binaries have not been compiled/generated.
Thank's for your help !

Hi,
I've checked all the Rpms and Kernel Versions : OK.
I ran an Rda for 11.5.10 CU2 , and I received the following Errors :
Default Action
Result: FAILED
Value: G++Elsewhere
LdElsewhere
Some of the required software tools for the the application tier of Oracle E-Business Suite Release 11i (11.5.10.2) installation were not found.
Check your installation.
Return Value Action
ArNotFound ar is not found in PATH.
ArElsewhere ar is not in /usr/bin as required.
GccNotFound gcc is not found in PATH.
GccElsewhere gcc is not in /usr/bin as required.
G++NotFound g++ is not found in PATH. <====
G++Elsewhere g++ is not in /usr/bin as required.
KshNotFound ksh is not found in PATH.
LdNotFound ld is not found in PATH.
LdElsewhere ld is not in /usr/bin as required. <====
MakeNotFound make is not found in PATH.
MakeElsewhere make is not in /usr/bin as required. Please note that ld and g++ are located in /usr/bin so i don't know if to trust this rda output :
which ld
/usr/bin/ld
which g++
/usr/bin/g++
And the Path is:
echo $PATH
/usr/bin:/nerp/release11i/ora_top/8.0.6/bin:/nerp/release11i/appl_top/fnd/11.5.0/bin:/nerp/release11i/appl_top/ad/11.5.0/bin:/usr/java/jdk1.6.0_23/bin:/nerp/release11i/comm_top/util/unzip/unzip/unzip-5.50::/nerp/release11i/ora_top/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/opt/java1.3/bin:/opt/ansic/bin:/opt/java1.3/bin

While applying the patch 10270433

While applying the patch 10270433 i got this error
The fix for Patch 7426842, are included in the patch currently
being installed (10270433)
Patch(es) 7140405, 8602992, conflict with the patch currently
being installed (10270433)
If you continue, all patches will be rolled back and the new patch
(10270433) will be installed.
Note: If the patch currently being installed (10270433) is rolled back,
it is recommended that the fixes being rolled back here (7426842, 7140405, 8602992, ) are reinstalled

The fix for Patch 7426842, are included in the patch currently
being installed (10270433)This is not an error message so you can ignore it.
Patch(es) 7140405, 8602992, conflict with the patch currently
being installed (10270433)
If you continue, all patches will be rolled back and the new patch
(10270433) will be installed.
Just apply Patch 10270433 and this will rollback other patches -- Please make sure you take a backup before applying this patch.
Thanks,
Hussein

Listener not stoping while apply CPU(patch)

Any body know the effect if i dont stop listener while apply CPU(Patch), i dont want to stop listener which is serving 30more dbs also....

You are heading for a train wreck.
If the CPU is going to patch the listener code (did you read the docs to see if it is?) then it is going to affect all 30 instances.
But then 30 instances on a single server is, by definition, a train wreck waiting to happen.
If you are the junior DBA I'd suggest you talk to the senior DBA immediately. If you are the only DBA it is time you either called in a consultant or had a long talk with management about the concept of consolidation as you are presiding over lunacy.

Work failed while applying the patch 3480000

Dear All,
Please Help
At the phase of applying the patch 3480000 while upgrading from 11.58 to 11.5.10.2
workers failed:
FAILED: file WFXLoad.class on worker 5 for product fnd username APPLSYS.
Time is: Tue Apr 05 2011 06:30:13
ATTENTION: All workers either have failed or are waiting:
FAILED: file WFXLoad.class on worker 1.
FAILED: file WFXLoad.class on worker 2.
FAILED: file WFXLoad.class on worker 3.
FAILED: file WFXLoad.class on worker 4.
FAILED: file WFXLoad.class on worker 5.
FAILED: file WFXLoad.class on worker 6.
FAILED: file WFXLoad.class on worker 7.
FAILED: file WFXLoad.class on worker 8.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.

Hi Hussein,
Sorry for being late
next is output screen for patch 3480000
There are now 39641 jobs remaining (current phase=A84):
6 running, 216 ready to run and 39419 waiting.
Assigned: file WFXLoad.class on worker 7 for product fnd username APPLSYS.
Assigned: file WFXLoad.class on worker 8 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 4 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 1 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 3 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 6 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 8 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 2 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 7 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 5 for product fnd username APPLSYS.
ATTENTION: All workers either have failed or are waiting:
FAILED: file WFXLoad.class on worker 1.
FAILED: file WFXLoad.class on worker 2.
FAILED: file WFXLoad.class on worker 3.
FAILED: file WFXLoad.class on worker 4.
FAILED: file WFXLoad.class on worker 5.
FAILED: file WFXLoad.class on worker 6.
FAILED: file WFXLoad.class on worker 7.
FAILED: file WFXLoad.class on worker 8.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
next is last lines in adworker log file
adjava -mx256m -nojit oracle.apps.fnd.wf.WFXLoad -u &un_apps &pw_apps &jdbc_db_addr &jdbc_protocol US &fullpath_cln_patch/115/xml/US_cln2a12os.wfx
Error:
Program exited with status 1
Cause: The program terminated, returning status code 1.
Action: Check your installation manual for the meaning of this code on this operating system.
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"h:\oracle\prodappl\ad\11.5.0\java\adjri.zip;H:\oracle\prodcomn\util\java\1.3\jdk1.3.1_07\lib\rt.jar;H:\oracle\prodcomn\util\java\1.3\jdk1.3.1_07\lib\i18n.jar;h:\oracle\prodcomn\java\appsborg.zip;h:\oracle\prodora\8.0.6\forms60\java;h:\oracle\prodcomn\java"
Calling h:\oracle\prodora\8.0.6\jdk\bin\java.exe ...
Oracle Workflow XML Loader 2.6.2
Connecting to APPS@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NT4SERVER)(PORT=1521))(CONNECT_DATA=(SID=PROD))) -- UTF8
Connected to (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NT4SERVER)(PORT=1521))(CONNECT_DATA=(SID=PROD)))
SQL Exception encountered during upload: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'UPLOADOBJECT'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Fatal error encountered during upload between line 10 and 35
Error encountered when upload.
AD Run Java Command is complete.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Apr 05 2011 06:30:13
Thanks&BR
Tarek

Installing OBIA 11.1.1.7.1 on Windows 7 (64-bit). While applying platform patches it's failing.

The final_patching_report.log is showing as follows:
----------START OF PATCHING REPORT------------------
* BIAPPSSHIPHOME Patching Report ..........
Patch Succeded: fsclite_rel7mlr2_16424872.zip
Patch Succeded: BISHIPHOME_11_1_1_7_0_GENERIC_130409_1210_16492220.zip
Patch Succeded: atglite_rel7mlr5A_database_16239380.zip
Patch Succeded: atglite_rel7mlr5_16480022.zip
Patch Succeded: fsmlitedb_rel7mlr2_16424869.zip
Patch Succeded: fsmlite_rel7mlr2_16424870.zip
Patch Failed: BISERVER_11_1_1_7_0_WINDOWS_X64_130326_2045_4_16583998.zip
Patch Failed: BIFNDN_11_1_1_7_0_WINDOWS_X64_130322_1000_5_16462147.zip
* Oracle Common Patching Report ..........
Patch Failed: p16433147_111170_Generic.zip
Patch Failed: p16080773_111170_Generic.zip
Patch Failed: Webservices_Patch-3-PS6RC3_bug-16487786.zip
Patch Failed: p16433036_111170_Generic.zip
Patch Failed: JDEVADF_REL7MLR10-RT_16525527.zip
Patch Failed: WebCenter_BP1REL7RC3_16311963.zip
Patch Failed: fmw_diagnostics_14757820_2.zip
Patch Failed: SOACOMMON_REL7B8_16438735.zip
* SOA Patching Report ..........
Patch Failed: SOA_REL7B8_16438735.zip
* ODI Patching Report ..........
Patch Succeded: p16629917_111170_Generic.zip
* Weblogic Patching Report ..........
----------END OF PATCHING REPORT------------------
The biappshiphome_win64_patches.log output:
Oracle Interim Patch Installer version 11.1.0.9.9
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home       : C:\MiddlewareHome\Oracle_BI1
Central Inventory : C:\Program Files\Oracle\Inventory
   from           : n/a
OPatch version    : 11.1.0.9.9
OUI version       : 11.1.0.9.0
Log file location : C:\MiddlewareHome\Oracle_BI1\cfgtoollogs\opatch\opatch2013-07-09_15-31-18PM_1.log
OPatch detects the Middleware Home as "C:\MiddlewareHome"
Verifying environment and performing prerequisite checks...
Prerequisite check "CheckActiveFilesAndExecutables" failed.
The details are:
Following files are active :
C:\MiddlewareHome\Oracle_BI1\\bifoundation\jlib\securityservice-api.jar
C:\MiddlewareHome\Oracle_BI1\\bifoundation\jlib\common.jar
C:\MiddlewareHome\Oracle_BI1\\bifoundation\jlib\securityservice.jar
Log file location: C:\MiddlewareHome\Oracle_BI1\cfgtoollogs\opatch\opatch2013-07-09_15-31-18PM_1.log
OPatch failed with error code = 73
Similar output in oracle_common_generic_patches.log.
There is no output for Weblogic Patching Report.
Thanks,
Neeraj

Hi Niraj,
               in which method your going to install the OBIEE i.e in the Enterprise installation mode or software installation mode. have u edit the apply platform patch file. will you let me know content in the files.
Thanks,
Yogi.

Error while applying a patch "Unable to get the database connection"

Dear Experts,
A patch which got successfully applied is failing Production and the error is kind of surprising to me.
Apps version is 11.5.10.2
db version is 10.2.0.4
The worker log file shows
Time when worker restarted job: Thu Nov 24 2011 22:14:52
Start time for file is: Thu Nov 24 2011 22:14:52
adjava -ms128m -mx256m -nojit oracle.apps.fnd.odf2.FndXdfCmp &un_apps &pw_apps &un_apps &pw_apps &jdbc_protocol &jdbc_db_addr table &fullpath_pa_patch/115
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/erp/oracle/prodappl/ad/11.5.0/java/adjri.zip:/usr/java14/jre/lib/charsets.jar:/usr/java14/jre/lib/core.jar:/usr/java14/jre/lib/graphics.jar:/usr/java1
Calling /usr/java14/bin/java ...
Exception occured
              Copyright (c) 2003 Oracle Corporation
                 Redwood Shores, California, USA
         XDF(XML Object Description File) Comparison Utility
                        Version 1
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
Unable to get the database connection using schema username/passwordIo exception: The Network Adapter could not establish the connection
AD Run Java Command is complete.
                     Copyright (c) 2002 Oracle Corporation
                        Redwood Shores, California, USA
                                    AD Java
                                 Version 11.5.0
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Thu Nov 24 2011 22:14:53
{code}
The error says database connection error. I am able to connect to the database using sqlplus. I tried to restart the failed worker, but the same error is repeating.
Any help would be appreciated.
Thanks
qARS
Edited by: user7640966 on Nov 24, 2011 9:07 AM

Hussein,
One thing which I noticed now is in the apps Tier the
tnsnames.ora under $TNS_ADMIN
shows entry like this:
PROD=
        (DESCRIPTION=
                (ADDRESS=(PROTOCOL=tcp)(HOST=<appsServerName>)(PORT=1521))
                (ADDRESS=(PROTOCOL=tcp)(HOST=<dbServer>)(PORT=1521))
            (CONNECT_DATA=
                (SID=PROD)
        )Actually *(ADDRESS=(PROTOCOL=tcp)(HOST=<appsIPaddress>)(PORT=1521))* this line in the tnsnames.ora is not correct. In fact the appsServerName should be replaced with dbServerName
I deleted the tnsnames.ora and reran autoconfig but it is again recreating the same entry.
Any clue how this can be fixed?
Thanks
qARS

Getting error while applying psu patch on 11.2.0.2.0

Hi All,
I am getting one error while applying psu july patch on top of 11.2.0.2.0
If anybody has the solution please answer:
Below is the code sample:
[oracle@host01 16619893]$ opatch prereq CheckConflictAgainstOHWithDetail -phBase                                                       Dir ./16619893
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.
PREREQ session
Oracle Home       : /u002/app/oracle/product/11.2.0/dbhome_1
Central Inventory : /u002/app/oraInventory
   from           : /u002/app/oracle/product/11.2.0/dbhome_1/oraInst.loc
OPatch version    : 11.2.0.3.4
OUI version       : 11.2.0.2.0
Log file location : /u002/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/                                                       opatch2013-06-28_02-08-44AM_1.log
Invoking prereq "checkconflictagainstohwithdetail"
Prereq "checkConflictAgainstOHWithDetail" passed.
OPatch succeeded.
[oracle@host01 16619893]$ opatch apply
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home       : /u002/app/oracle/product/11.2.0/dbhome_1
Central Inventory : /u002/app/oraInventory
   from           : /u002/app/oracle/product/11.2.0/dbhome_1/oraInst.loc
OPatch version    : 11.2.0.3.4
OUI version       : 11.2.0.2.0
Log file location : /u002/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/                                                       opatch2013-06-28_02-10-02AM_1.log
Verifying environment and performing prerequisite checks...
Prerequisite check "CheckActiveFilesAndExecutables" failed.
The details are:
Following executables are active :
/u002/app/oracle/product/11.2.0/dbhome_1/lib/libclntsh.so.11.1
UtilSession failed: Prerequisite check "CheckActiveFilesAndExecutables" failed.
Log file location: /u002/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/o                                                       patch2013-06-28_02-10-02AM_1.log
OPatch failed with error code 73
[oracle@host01 16619893]$ ps -ef |grep libclntsh.so.11.1
oracle   15943 15446 0 02:11 pts/3    00:00:00 grep libclntsh.so.11.1
[oracle@host01 16619893]$
Why I am getting that error? And how to check wheather lobclntsh.so.11.1 is running and how to kill it?
Thanks in advance.

See the below link
Oracle DBA and RAC DBA Expert: Reason: Cannot apply patch due to fatal error & CheckActiveFilesAndExecutables failed
I hope it resolves your issue.
Regards,
http://www.oracleracexpert.com

Error while applying the patch 9239089

Dear All,
I have installed the Oracle E-Business Suite Release 12(12.1.1) on Windows 2003 (32-bit) OS successfully.Its a single node installation.
Hardware & Software Specifications:
- Intel Core 2 Duo, CPU 2.40 GHz
- 2 GB of RAM
- 180 GB Hard Drive
- Windows XP Professional with Sevice Pack 2
The problem is when I try to apply a patch 9239089, it gives error atleast 2-3 times as below
An error occurred while relinking application programs.
Continue as if it were successful [No] :
And the Patch gets completed.
Find the log of the patch below:
An error occurred while extracting files from library.
Continue as if it were successful [No] : Yes
Done extracting object modules from product libraries.
STOP_TASK: [Perform libout actions] [] [Mon Mar 28 2011 18:07:15]
STRT_TASK: [Perform version checking] [] [Mon Mar 28 2011 18:07:15]
Performing version checking...
Log and Info File sync point:
Mon Mar 28 2011 18:07:15
AutoPatch found some files which it will not apply.
These files are listed in the AutoPatch informational message file.
STOP_TASK: [Perform version checking] [] [Mon Mar 28 2011 18:07:15]
STRT_TASK: [Determine directories to create] [] [Mon Mar 28 2011 18:07:15]
Skipping...
Determine directories to create for Specified driver
since no such action is present for this driver file
STOP_TASK: [Determine directories to create] [] [Mon Mar 28 2011 18:07:15]
STRT_TASK: [Determine executables to link] [] [Mon Mar 28 2011 18:07:15]
Determining what executables to link...
STOP_TASK: [Determine executables to link] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Determine forms executable files to generate] [] [Mon Mar 28 2011 18:07:16]
Skipping...
Determine forms to generate for Specified driver
since no such action is present for this driver file
STOP_TASK: [Determine forms executable files to generate] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Determine Reports PL/SQL library files to generate] [] [Mon Mar 28 2011 18:07:16]
Skipping...
Determine Oracle Reports libraries to generate for Specified driver
since no such action is present for this driver file
STOP_TASK: [Determine Reports PL/SQL library files to generate] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Determine Reports files to generate] [] [Mon Mar 28 2011 18:07:16]
Skipping...
Determine reports to generate for Specified driver
since no such action is present for this driver file
STOP_TASK: [Determine Reports files to generate] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Determine message files to generate] [] [Mon Mar 28 2011 18:07:16]
Skipping...
Determine if need to generate message files for Specified driver
since no such action is present for this driver file
STOP_TASK: [Determine message files to generate] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Find bugs with no active actions] [] [Mon Mar 28 2011 18:07:16]
Looking for active bug fixes with no active actions...
About to turn off duplicate actions: Mon Mar 28 2011 18:07:16
Start of adptod(): Mon Mar 28 2011 18:07:16
Actions scanned: 382
Duplicate actions: 0
End of adptod(): Mon Mar 28 2011 18:07:16
Done turning off duplicate actions: Mon Mar 28 2011 18:07:16
About to turn off bugs with no active actions: Mon Mar 28 2011 18:07:16
Start of adpunb(): Mon Mar 28 2011 18:07:16
Active bugs at start: 72
Bugs turned off: 71
Outer loop iterations: 72
Actions scanned: 47
End of adpunb(): Mon Mar 28 2011 18:07:16
Done turning off bugs with no active actions: Mon Mar 28 2011 18:07:16
About to save release list to filesystem: Mon Mar 28 2011 18:07:16
Done saving release list to filesystem: Mon Mar 28 2011 18:07:16
STOP_TASK: [Find bugs with no active actions] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Display customized files] [] [Mon Mar 28 2011 18:07:16]
Reading customized files list (if any)...
Did not find customized files registration file
"D:\oracle\PROD\apps\apps_st\appl\admin\applcust.txt"
The file may have been uploaded to the database.
This patch replaces the following customized files:
No customized files are replaced by this patch.
STOP_TASK: [Display customized files] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Copy files] [] [Mon Mar 28 2011 18:07:16]
Copying files into installation area...
No files were selected for copying.
STOP_TASK: [Copy files] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Forcecopy files] [] [Mon Mar 28 2011 18:07:16]
Skipping...
ForceCopy files into installation area for Specified driver
since no such action is present for this driver file
STOP_TASK: [Forcecopy files] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Perform libin actions] [] [Mon Mar 28 2011 18:07:16]
Archiving object modules into product libraries...
No object modules were selected for archiving.
STOP_TASK: [Perform libin actions] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Create directories] [] [Mon Mar 28 2011 18:07:16]
Skipping...
Create Directories for Specified driver
since no such action is present for this driver file
STOP_TASK: [Create directories] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Relink executables] [] [Mon Mar 28 2011 18:07:16]
Relinking executables...
An error occurred while relinking application programs.
Continue as if it were successful [No] : Yes
AutoPatch is exiting successfully.
sqlplus -s APPS/***** @D:\oracle\PROD\apps\apps_st\appl\ad\12.0.0\sql\adtimrpt.sql 15831 adt15831
Spooling to adt15831.lst
Spooling to adt15831.csv
A job timing report has been generated for the current session.
You should check the file
D:\oracle\PROD\apps\apps_st\appl\admin\PROD\out\adt15831.lst
for details.
Purging timing information for prior sessions.
sqlplus -s APPS/***** @D:\oracle\PROD\apps\apps_st\appl\ad\12.0.0\sql\adtpurge.sql 10 1000
Done purging timing information for prior sessions.
AutoPatch is complete.
AutoPatch may have written informational messages to the file
D:\oracle\PROD\apps\apps_st\appl\admin\PROD\log\9239089.lgi
Errors and warnings are listed in the log file
D:\oracle\PROD\apps\apps_st\appl\admin\PROD\log\9239089.log
and in other log files in the same directory.
Regards,
Vinayak K

Hi,
Find the Output
D:\oracle\PROD\apps\apps_st\appl>make -v
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for i686-pc-cygwin
D:\oracle\PROD\apps\apps_st\appl>gnumake -v
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for Windows32
D:\oracle\PROD\apps\apps_st\appl>APPSPROD_ebstest.cmd
ECHO is off.
ECHO is off.
Tue 03/29/2011 07:05 PM
ECHO is off.
ECHO is off.
This script requires the following files:
ECHO is off.
C:\MSV\VC\bin\bin\vcvars32.bat
ECHO is off.
APPSORA.cmd exiting with status 0
D:\oracle\PROD\apps\apps_st\appl>echo %PATH%
D:\oracle\PROD\apps\apps_st\appl\au\12.0.0\bin;D:\oracle\PROD\apps\apps_st\appl\
fnd\12.0.0\bin;D:\oracle\PROD\apps\apps_st\appl\ad\12.0.0\bin;D:\oracle\PROD\app
s\tech_st\10.1.3\appsutil\jdk\jre\bin;D:\oracle\PROD\apps\tech_st\10.1.3\perl\5.
8.3\bin\MSWin32-x86-multi-thread\;D:\oracle\PROD\apps\apps_st\comn\util\unzip\un
zip;D:\oracle\PROD\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\PROD\apps\tech
st\10.1.2\bin;D:\oracle\PROD\apps\techst\10.1.3\appsutil\jdk\bin;D:\oracle\PRO
D\apps\tech_st\10.1.3\appsutil\jdk\jre\bin;C:\cygwin\bin;C:\WINDOWS;C:\WINDOWS\s
ystem32;D:\oracle\PROD\apps\tech_st\10.1.3\ant\bin
D:\oracle\PROD\apps\apps_st\appl>
Regards,
Vinayak K

Error while applying Java Patch 16 on WAS 640 ABAP+JAVA

Hello Masters,
I am in process of applying Patch 16 to my BW 3.5 WAS 640 ABAP+JAVA systems. I have successfully applied ABAP patch level to 16. Now I am applying to J2EE Patch 16 to system. I did prerequisite check and everything is okay. Platform - Sun Solaris 9, Oracle 9.2.0.6. When I click on apply Patch 16, it goes thru central instance profile, java home directory okay. After this it is asking me to supply file for JCE and I gave path for file "jce_policy-1_4_2.zip". after that it extracts this file to Java_home/jre and at point when it tries to extract visual.dat, it throws following error :
CJS-00030 Assertion failed: in
function () {
    if (!this.hasJ2EE()) {
        installer.writeTrace("Can't determine JAVA_HOME of instance " + this.getName() + ": no J2EE engine installed.");
        return undefined;
    var fmgt = new FileMgt();
    var instanceProfile = this.getProfile();
    var javaHome = instanceProfile.get("jstartup/vm/home");
    if (javaHome) {
        return javaHome.value();
    var pname = this.getDirInstance() + "/j2ee/cluster/instance.properties";
    var pNode = fmgt.getNode(pname);
    ASSERT_DEFINED(arguments.callee, pNode, "pNode(" + pname + ")");
    var stream = pNode.getFileStream("READ");
    ASSERT_DEFINED(arguments.callee, stream, "stream(" + pname + ")");
    var props = new R3Profile(stream);
    for (var it = props.propertyNames(); !it.isDone(); it.next()) {
        var p = it.get();
        if (p.name().indexOf("JavaPath") != -1) {
            return p.value();
    ASSERT(arguments.callee, false, "no property with JavaPath in its name found in file " + pname);
no property with JavaPath in its name found in file /usr/sap/QWA/DVEBMGS02/j2ee/cluster/instance.properties
ERROR 2006-08-03 14:57:30
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
WARNING 2006-08-03 14:57:30
The step checkIfSafeModeIsEnabled with step key ApplySupportPackage|ind|ind|ind|J2EE_Engine|6.30|0|PatchJ2eeEngine|ind|ind|ind|J2EE_Engine|6.30|0|checkIfSafeModeIsEnabled was executed with status ERROR.
WARNING 2006-08-03 14:58:54
An error occurred during the installation.
Your input will be greately appreciated and would reward points.
Thanks,
Digesh

Hello Digesh,
The firt thing please go to os level prompt for <SID>adm user and type echo $JAVA_HOME. What is the value that is reflected after issuing the above.
Also please check that your SAP-J2EE instance is running properly or not.
The JCE is used for Weak and strong encryption.
Also please check the instance.properties file. Does it contain proper parameter as per your SAP installation.
Regards,
Prem

Error while applying INLOC patch on 11i platform windows 2003.

Hi all,
follwoing error and warning occur while applying INDIA LOCALIZATION patch 6410725 on windows 2003.
***Error! Could not copy ja_in_tran_rg_entry_trg.sql to E:\inloc\ILP\patch\6410725\backup\patch/115/sql. Skipping..The syntax of the command is incorrect.
Copied patch\115\sql\ja_in_tran_rg_entry_trg.sql successfully to d:\oracle\visappl\ja\11.5.0\patch\115\sql.
Applied ja_in_tran_rg_entry_trg.sql successfully.
***Error! Could not copy ja_in_reqn_curr_upd_trg.sql to E:\inloc\ILP\patch\6410725\backup\patch/115/sql. Skipping..The syntax of the command is incorrect.
Copied patch\115\sql\ja_in_reqn_curr_upd_trg.sql successfully to d:\oracle\visappl\ja\11.5.0\patch\115\sql.
Applied ja_in_reqn_curr_upd_trg.sql successfully.
***Warning! Could not create patch/115/sql directory. Skipping..
The system cannot find the path specifiedBacked jai_cmn_dbg_ctx.pls in from databaseCopied patch\115\sql\jai_cmn_dbg_ctx.pls successfully to d:\oracle\visappl\ja\11.5.0\patch\115\sql.
Applied jai_cmn_dbg_ctx.pls successfully.
***Warning! Could not create patch/115/sql directory. Skipping..
The system cannot find the path specifiedBacked ja_in_balance_transfer.sql in from databaseCopied patch\115\sql\ja_in_balance_transfer.sql successfully to d:\oracle\visappl\ja\11.5.0\patch\115\sql.
Applied ja_in_balance_transfer.sql successfully.
***Warning! Could not create patch/115/sql directory. Skipping..
The system cannot find the path specifiedBacked jai_cmn_dbg_ctx.plb in from databaseCopied patch\115\sql\jai_cmn_dbg_ctx.plb successfully to d:\oracle\visappl\ja\11.5.0\patch\115\sql.
Applied jai_cmn_dbg_ctx.plb successfully.
Skipping JAI_ARSETUP_C.ldt because FND patchset level is H..Copied JAI_ARSETUP_E.ldt successfully to E:\inloc\ILP\patch\6410725\backup\patch\115\import\US.
Copied patch\115\import\US\JAI_ARSETUP_E.ldt successfully to d:\oracle\visappl\ja\11.5.0\patch\115\import\US.
Applied JAI_ARSETUP_E.ldt successfully.
I have check all pre requisites, is any steps before applying the patch to avoid this kind error?
regards,
sandeep.

Hi,
i dont understand why path is changing
E:\inloc\ILP\patch\6410725\backup\patch / 115 / sql
1)did u give correct path of patch directory when installing patch?
2)are u installing the patch from inside the patch directory?if not do it and check
3)give full permission to everyone on the patch directory
Regards
Edited by: Ahmed@hungry_dba on Feb 14, 2010 10:52 PM

Error while applying the patch 9909156

while applying patch 9909156. I am getting jsp compilation errors in the patch log
[1634474] !!COMPILATION ERROR(0) ibeCRgpPartnerPriCreate.jsp:
this is similar MOS doc 579439.1 - Application Of Patch 5720979 Results In COMPILATION ERROR(0) ibeCOtdOrdCancelMain.jsp. Can you confirm please?
Patch 6128322 is for module iStore which is inactive on our system . Patch 5720979 was applied to the system (most likely as cumulative CPU). Can you confirm that given the module is inactive if we need to apply patch 6128322

This is the error in the log file we are using 11.5.10.2
[1634474] !!COMPILATION ERROR(0) ibeCRgpBusinessCreate.jsp:
_ibeCRgpBusinessCreate.java:856: cannot find symbol
symbol : variable USERNAME_NOT_FOUND
location: class oracle.apps.ibe.um.UserManager
String usernameTestStatusCode=UserManager.USERNAME_NOT_FOUND;
^
_ibeCRgpBusinessCreate.java:858: cannot find symbol
symbol : variable SELF_REGISTRATION
location: class oracle.apps.ibe.um.UserManager
usernameTestStatusCode=UserManager.checkUsernameExists(usernameUpper, UserManager.SELF_REGISTRATION);
^
_ibeCRgpBusinessCreate.java:896: cannot find symbol
symbol : variable USERNAME_NOT_FOUND
location: class oracle.apps.ibe.um.UserManager
else if(ibeRegKnownUser==null && ! usernameTestStatusCode.equals(UserManager.USERNAME_NOT_FOUND))

Failed worker while applying one patch

Similar Messages

Maybe you are looking for