Failing to connect to desktop. Sony DR-BT22 Wireless Headset

I have a Sony DR-BT22 bluetooth Wireless Headset which is connected to my computer desktop through a TRENDnet Wireless Bluetooth USB Adapter. It was working fine in the beginning. but after a while the headset is not behaving properly. I tried resetting it multiple times.
I did a reset on the headset using a stray pin. I paired it fresh with my computer again after removing the old connections/icons. They all happens fine. But when I connect through "Headset" profile or "Handsfree" profile it does not give the audio on the sony headset.
I tried conecting also through the bluetooth places in my desktop, task bar icon etc.
The computer speaker stops playing sound and at the same time the sony headset is not outputting sound either.
the only way i was able to make it work partially was to going to control panel sounds section and changing the default output for voice to bluetooth headset instead of my realtek audio driver. The issue with that setting is, computer audio will only come to bluetooth and won't failover to default desktop speakers.
I tried connecting the sony headset to my blackberry and it pairs and works perfect without any of the above problems.
I was frustrated and purchased a motorola motorokr s9 hd bluetooth headset and they work perfect without any problem.
when connected it routes t he audio to bluetooth instead of computre speaker and when the bluetooth headset is turned off the sound failovers to default computer desktop speaker
Why is my sony headset not doing the intended behaviour. ? How do I fix this? i tried removing and configuring multiple times

Hello.
Both profiles are supported for your DR-BT22
http://www.kb.sony.com/selfservice/micr ... 0206734971
Which OS are you using?
here is a walk through for Windows7
http://www.kb.sony.com/selfservice/micr ... 0206734971
in the owners manual Page 19 should help with commands
page 24-25 have some troubleshooting tips
http://www.docs.sony.com/release/DRBT22.pdf
if none of the above are working, please contact us for further options.
http://esupport.sony.com/US/perl/suppor ... mdl=DRBT22

Similar Messages

Sony DR-BT21G Wireless Headset & windows 7. Device driver software?

Hi Guys, trying to connect my Sony DR-BT21G Wireless Headset , to my P.C via Bluetooth,
Operating system for my machine wasW8, but has been downgraded to W7.
I have installed a Bluetooth dongle.
The computer recognises the headset as a device, but states that "the Driver for the Bluetooth peripheral device is not installed"
Cannot find a download to fix this problem.. any ideas?

Please try the following. Each of these steps represents a possible solution to this issue, check the pair status after completing each step:
Make sure both devices are turned off at the beginning of the pairing procedure.
Be sure to place the Bluetooth wireless devices within 1 meter (3 ft) of each other.
Make sure that the Bluetooth wireless device is in the Pairing mode.
Enter the same Passcode for both Pairing devices.
Make sure that the profiles of the Bluetooth wireless devices match. Devices that do not support the same profile cannot be paired.
If the Bluetooth wireless device has a TX/RX (transmit/receive) switch, make sure it is set to the appropriate function.
Some Bluetooth wireless devices can function as a transmitter or receiver only. Two devices that serve the same function (transmit or receive) cannot be paired. You must pair a transmitter with a receiver.
The device you are trying to pair with must support Advanced Audio Distribution Profile (A2DP) and AVRCP (Audio Video Remote Control Profile).
If pairing is not established within five minutes, pairing mode will be cancelled and the Bluetooth headphones will automatically turn off. If this happens, perform the pairing procedure again.
If my post answers your question, please mark it as "Accept as Solution"

Wireless Headset Motorokr S9/Sony DR-BT22 SUCCESSFULLY Paired!

I have SUCCESSFULLY paired both my Motorokr S9 and Sony DR-BT22 Wireless Headset to my iPhone! It can be done.
You'll need the stereo transmitter adapter *SONY TMR-BT8iP*. Plug it to iPhone, it will say THIS ACCESSORY IS NOT MADE TO WORK WITH IPHONE, *ignore it*. If you want to answer phone calls do not choose to put AIRPLANE MODE on, (but the quality is better when you turn it on).
Pair the headset (Motorola and/or Sony) no codes needed, and walla you got music in BOTH earphones!
Not sure if it makes a difference, but I paired the iPhone with the Sony Transmitter BEFORE I paired it with just the iPhone for phone calls.
Good everyone.

Hello.
Both profiles are supported for your DR-BT22
http://www.kb.sony.com/selfservice/micr ... 0206734971
Which OS are you using?
here is a walk through for Windows7
http://www.kb.sony.com/selfservice/micr ... 0206734971
in the owners manual Page 19 should help with commands
page 24-25 have some troubleshooting tips
http://www.docs.sony.com/release/DRBT22.pdf
if none of the above are working, please contact us for further options.
http://esupport.sony.com/US/perl/suppor ... mdl=DRBT22

Desktop App Failed to Connect (Mac)

So I was just using Adobe Story offline to make a script, then I restarted my MacPro (running Lion), all of my software is up-to-date, always, then when I went to log into Story on the desktop, the second I hit "enter" to log it, it just said "Failed to connect. Please try again later.", however, when I log in with my old Adobe account (I got a new one because my old E-Mail was deleted, so I couldn't verify my E-Mail), it loads for two seconds then says that it sent a verification to my E-Mail! However, when I log into https://www.adobe.com with my E-Mail, it connects just fine! Why can't I log on? Or can someone at least tell me where I can find my saved script files? Thank you.

I have the same problem woith my Torch 9800. The Desktop Software tells me it is not connected. My local Mac dealer cannot help, neither can my carrier. My Mac (Lion) is standalone and my BB has not been touched by any IT guy or girl. Result: I'm unable to synchronise my BB with my Mac.
What is truly disappointing is that my carrier has contacted RIM on this subject, but the latter did not react. No wonder their sales and stock price are down. They should realise that Mac sales are up, and that the iPhone is superbly simple to synchronise via iTunes.
Wake up, RIM!
Ole

Cisco desktop agent fail to connect to CCX7.0

Hello,
Please we occure a problem that the Cisco desktop agent fail to connect to CCX 7.0 extension Agent ID not found.
regards

We're currently seeing the same issue with only two Agents. When you look at the Agent's call log, it shows a reason code of Ring No Answer. This would lead me to believe that UCCX is attempting to pass calls to the Agents, but the phone never rings. Anyone else seeing this?
We're running UCCX 8.0.2 and CAD ver 8.0.2.300.

My desktop fails to connect to wifi each time it wakes up.

My IMAC after waking up fails to connect to my wireless network automatically - I have to choose a network manually. Have already gone into setting to ensure that it seeks automatically, but that didn't work.

my Macbook pro started doing this too after upgrading to Lion, does anyone have an answer for this?

On Windows 2012 Terminal Server Outlook fails to connect to Exchange 2013

I have a new install of Windows 2012.  I have two physical servers. One is a W2012 std Domain Controller ("DC"). The Second is configured as W2012 HyperV  ("HV"). Under HV I have
two VMs. One VM is W2012/Exchange 2013 ("ExchVM) and the other is W2012/Terminal Server ("VMTS"). All systems are behind a firewall appliance. Exchange is working via Outlook and OWA internally and externally. The self
created SSL must be installed manually on external machines since it comes up as an untrusted certificate. Once installed remote outlook works and OWA works. I have configured the terminal server and I am able
to login remotely as various users under my "TS group". The problem is when ever I attempt to open Outlook for the 1st time, it fails to connect to the exchange server.   (Open Outlook 2013, click next
on the splash screen, "Yes" Add an Email Account splash screen, click next, Auto Account screen populates NAME and Email Address correctly, click next, Searching for mail server settings..., check on establishing network connection, check on searching
for alias@ domain, then fails the logging on to the mail server) The error reads: "Outlook cannot log on. Verify you are connected to the network and are using the proper server and mailbox name. The
connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."   I am connected in RDS from offsite, and from the RD session I can access shared folders on ExchVM and DC. I have
tried have verified the server Exchange server name is correct via "Get=ClientAccessServer" command. I have also tried to use the guid via "Get-Mailbox
ALIAS | fl name, exchangeguid. Keep in mind all desktop users on the network are connecting to Outlook without issue.
I would appreciate any thoughts on solving this issue.

Hi,
According to your workaround, it seems that the Outlook Anywhere configuration in Outlook client is not correct when using the Autodiscover service.
Once you connected to Exchange server by manually settings, please run Test E-mail AutoConfiguration tool in external Outlook client to check the autodiscover service:
open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar - Test Email AutoConfiguration. Put your email address - uncheck use guessmart and secure guessmart authentication - click Test to check your Autodiscover service.
Please check the Log tab and confirm whether the Autodiscover service is connected successfully. Also confirm if the connection issue happens to all external users when they open Outlook for the 1st time. In Exchange server, please make sure
autodiscover.domain.com has been included in your Exchange certificate which is assigned with IIS service.
Regards,
Winnie Liang
TechNet Community Support

How to connect sony bravia tv wirelessly to internet using apple airport

Hi. I cannot connect my Sony Bravia smart TV wirelessly to internet via my Apple Airport Extreme wireless setup. The TV status is network connection OK, but fails to connect to internet. Apple Laptop connects OK via wireless Can anyone help please.

Hello chowpotluri, thank you for your message. Welcome to SONY Community!
Follow these steps to access the YUPPTV app from the Internet Video menu:
1. Using the supplied remote, press the Home button.
2. Select Internet Video.
NOTE: If the Internet Video option is missing, Select Refresh Internet Content from the Network section of the menu and repeat step one.
3. Select YuppTV.
NOTE: YuppTV requires a device registration. Follow the steps on the screen to register the account. Visit the YuppTVwebsite for account information and answers to usage questions.
Hopefully this post helps you.

Connecting MacBook to Sony Bravia via DVI-HDMI!

Hi I am having major issues with my Macbook connecting to my Sony Bravia KDL-32V4000 I now have 2 different DVI-HDMI leads as well as the Apple Mini-DVI-DVI and still have absolutely no luck.
The Macbook is picking up the Television absolutely no bother at all but there is just nothing at all coming up on the Television its self it doesn't even recognise that I have the computer in the HDMI slot nothing at all just blank!
Any help would be greatly appreciated as it will save me buying more and more cables if this fails to work will have to go with the DVI-VGA I guess would rather fix this though!
Thanks!

I bought a mini-DVI to HDMI and an HDMI to HDMI cable. Once I went into settings for the display, I found that the TV was acting as a second monitor and that it was off to the right of the macbooks own screen. Thus if i moved the mouse to the right it could control the second monitor. You are able to move the screens so that they have the same data on each or use them as two screen with different info on each. Each screen is clearly visible in Spaces and it works a treat.
It is also possible to use the TV as the only screen. The way to do this is to connect up and close the lid on the mac. Once the light on the front starts blinking you can wake it up by using your mighty mouse or external keyboard. once awake, assuming you have chosen the correct HDMI connection from the TV the TV will act as the only monitor at full resolution.
The problem I have, is that I have not been able to get the sound to work. I have used the earphone socket and connected that to external speakers as I cannot seem to get the analogue signal on the TV on anything but an AV channel (not an HDMI channel). Thus the sound works on one channel and the image on another. My TV is a Sony KDL40w5710 - thus if anyone know the solution to getting the sound running through an HDMI channel on my TV it would be appreciated if you could contribute.
Cheers

VPN fails to connect

Does anyone know if the VPN option works? It is under setting, wireless network, VPN settings. I have a PPTP connection that works fine from my desktop but "fails to connect to server" when tried on my phone.

Sorry to say that showing the scrreen shots does not make it work. The bottom line is the the ROM supplied by Verizon/Samsung/Google - whoever you want to blame does not support VPN connections.
Here is a log and one VPN vendors answer.
11-18 21:27:41.648 E/VpnService(7616)onError()
11-18 21:27:41.648 E/VpnService(7616)java.io.IOException: Connecting timed out
11-18 21:27:41.648 E/VpnService(7616)at com.android.server.vpn.VpnService.waitUntilConnectedOrTimedout(VpnService.java:206)
11-18 21:27:41.648 E/VpnService(7616)at com.android.server.vpn.VpnService.onConnect(VpnService.java:136)
11-18 21:27:41.648 E/VpnService(7616)at com.android.server.vpn.VpnServiceBinder$2.run(VpnServiceBinder.java:108)
11-18 21:27:41.648 E/VpnService(7616)at java.lang.Thread.run(Thread.java:1096)
11-18 21:27:41.728 I/VpnService(7616)disconnecting VPN...
11-18 21:27:41.793 D/VpnActor(7580)vpn disconnecting!
We think the reason behind this error is that, either your phone not support VPN or the ROM u r using have VPN problem.( from my own experience, I think it's the ROM problem)

Hyper-V Remote Admin on a Domain - Failed to connect to root\cimv2

I'm trying to configure our Hyper-V server so that a user on our domain has administrative control. Our Hyper-V server is on the domain running 2008 R2 (named SERVER85 below), and the client is on Win 7 Ent x64 (named DEV03 below, username accuraty\jkessel).
In the output below you can see that it appears we might have a problem with this user's access to the WMI path root\CIMv2, but if I pull up the advanced security settings for that node in WMI, I see:
Name: Justin Kessel ([email protected])
Apply to: This namespace and subnamespaces
Permissions allowed: "Enable Account" and "Remote Enable" (no others, no denies).
IMHO, the server, the desktop, and user are all fairly "vanilla" with nothing unusual going on. Maybe one thing worth noting: our Small Business Server 2008 (i.e. domain controller) is running as a VPS on SERVER85, so SERVER85 never boots with the
domain controller on. This hasn't ever caused problems except that the machine always thinks it's firewall should be in the "work" configuration instead of the "domain" configuration. I tested running the HVRemote script while the SERVER85 firewall
was turned off, and I get exactly the same results below.
One more note: this user currently can logon through RDP to SERVER85 and administer Hyper-V just fine. This user is *not* a domain admin or an admin on that server - I've simply provided him with the right permissions to be able to RDP and admin Hyper-V
only.
We used HVRemote and it output this info when run on the client:
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
Hyper-V Remote Management Configuration & Checkup Utility
John Howard, Hyper-V Team, Microsoft Corporation.
http://blogs.technet.com/jhoward
Version 0.7 7th August 2009
INFO: Computername is DEV03
INFO: Computer is in domain accuraty.local
INFO: Current user is ACCURATY\JKessel
INFO: Assuming /mode:client as the Hyper-V role is not installed
INFO: Build 7600.16617.amd64fre.win7_gdr.100618-1621
INFO: Detected Windows 7/Windows Server 2008 R2 OS
INFO: Remote Server Administration Tools are installed
INFO: Hyper-V Tools Windows feature is enabled
DACL for COM Security Access Permissions
\Everyone    (S-1-1-0)
     Allow: LocalLaunch RemoteLaunch (7)
NT AUTHORITY\ANONYMOUS LOGON    (S-1-5-7)
     Allow: LocalLaunch (3)
BUILTIN\Distributed COM Users    (S-1-5-32-562)
     Allow: LocalLaunch RemoteLaunch (7)
BUILTIN\Performance Log Users    (S-1-5-32-559)
     Allow: LocalLaunch RemoteLaunch (7)
ANONYMOUS LOGON Machine DCOM Access
ANONYMOUS LOGON does not have remote access
This setting should only be enabled if required as security on this
machine will be lowered. This computer is in a domain. It is not
required if the server(s) being managed are in the same or trusted
domains.
Use hvremote /mode:client /anondcom:enable to turn on
Firewall Settings for Hyper-V Management Clients
Domain Firewall Profile is active
   Enabled: Hyper-V Management Clients - WMI (Async-In)
   Enabled: Hyper-V Management Clients - WMI (TCP-Out)
   Enabled: Hyper-V Management Clients - WMI (TCP-In)
   Enabled: Hyper-V Management Clients - WMI (DCOM-In)
Windows Firewall exception rule(s) for mmc.exe
Domain Firewall Profile is active
   Enabled: Microsoft Management Console (UDP)
   Enabled: Microsoft Management Console (TCP)
Additional configuration may be necessary
This computer is in a domain. If the target server is in a workgroup,
you may need to set credentials for the server for Hyper-V Remote
Management to operate correctly. This step should not be necssary if
the target server is in the same or trusted domain as this computer.
If necessary, from a *NON* elevated command prompt, enter:
     cmdkey /add:ServerComputerName /user:ServerComputerName\UserName /pass
Note that you MUST enter ServerComputerName to BOTH parameters.
You will be prompted for a password after entering the command.
IP Configuration
Windows IP Configuration
   Host Name . . . . . . . . . . . . : DEV03
   Primary Dns Suffix . . . . . . . : accuraty.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : accuraty.local
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : accuraty.local
   Description . . . . . . . . . . . : Intel(R) PRO/100 VE Network Connection
   Physical Address. . . . . . . . . : 00-19-D1-05-57-01
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::4406:b48c:dea3:de50%11(Preferred)
   IPv4 Address. . . . . . . . . . . : 172.16.48.185(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Wednesday, November 10, 2010 3:19:23 AM
   Lease Expires . . . . . . . . . . : Monday, December 20, 2010 9:39:25 AM
   Default Gateway . . . . . . . . . : 172.16.48.1
   DHCP Server . . . . . . . . . . . : 172.16.48.210
   DHCPv6 IAID . . . . . . . . . . . : 234887633
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-62-35-81-00-19-D1-05-57-01
   DNS Servers . . . . . . . . . . . : 172.16.48.210
66.209.192.5
8.8.8.8
                                       66.209.192.15
8.8.4.4
4.2.2.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.accuraty.local:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Stored Credentials
Currently stored credentials:
    Target: WindowsLive:[email protected]
    Type: Generic
    User:
[email protected]
    Local machine persistence
    Target: LegacyGeneric:target=WindowsLive:(token):[email protected];serviceuri=contacts.msn.com
    Type: Generic
    User:
[email protected]
    Local machine persistence
    Target: Domain:target=TERMSRV/server85
    Type: Domain Password
    User: ACCURATY\jkessel
    Local machine persistence
    Target: WindowsLive:target=virtualapp/didlogical
    Type: Generic
    User: 02mybhosqazs
    Local machine persistence
Testing connectivity to server:server85
1: - nslookup for DNS verification.
     Note that failure is OK if you don't have a DNS infrastructure
~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~
Server: sbs01.accuraty.local
Address: 172.16.48.210
Name:    server85.accuraty.local
Address: 172.16.48.201
~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~
2: - ping attempt (ping -4 -n -1 server85)
   Note the ping may timeout - that is OK. However, if you get an
     error that server85 could not be found, you need to fix DNS
     or add an entry to the hosts file. Test 3 will fail and provide more
     guidance.
     This may take a second or two...
~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~
Pinging server85.accuraty.local [172.16.48.201] with 32 bytes of data:
Reply from 172.16.48.201: bytes=32 time<1ms TTL=128
Ping statistics for 172.16.48.201:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~
3: - Connect to root\cimv2 WMI namespace
***** Failed to connect to root\cimv2
***** Error:     -2147024891 Access is denied.
***** Namespace: root\cimv2
     FAIL - Was unable to connect. Diagnosis steps:
     - Have you run hvremote /add:user or hvremote /add:domain\user
       on server85 to grant access?
     - Are you sure the server name 'server85' is correct?
     - Did you use cmdkey if needed? More information higher up.
     - Did you restart server85 after running hvremote /add for
       the very first time? (Subsequent adds, no restart needed.)
     - Is DNS operating correctly and was server85 found?
       Look at the output of tests 1 and 2 above to verify that the
       IPv4 address matches the output of 'ipconfig /all' when run on
       server85. If you do not have a DNS infrastructure,
       edit \windows\system32\drivers\etc on DEV03
       to add an entry for server85.
INFO: Are running the latest version
3 warning(s) or error(s) were found in the configuration. Review the
detailed output above to determine whether you need to take further action.
Summary is below.
1: Anonymous Logon does not have remote access (may be ok)
2: You *may* need to set credentials for access to the server
3: Cannot connect to root\cimv2 on server85
I'd greatly appreciate some help!
Thanks!

Hi,
It seems that you were using Hyper-V Remote Management Configuration Utility from the link
http://code.msdn.microsoft.com/HVRemote, if so, you can refer to the following link.
Configure Hyper-V Remote Management in seconds
http://blogs.technet.com/jhoward/archive/2008/11/14/configure-hyper-v-remote-management-in-seconds.aspx
By the way, if you want to perform the further research about Hyper-V Remote Management Configuration Utility, it is recommend that you to get further
support in the corresponding community so that you can get the most qualified pool of respondents. Thanks for your understanding.
For your convenience, I have list the related link as followed.
Discussions for Hyper-V Remote Management Configuration Utility
http://code.msdn.microsoft.com/HVRemote/Thread/List.aspx
Best Regards,
Vincent Hu

SSIS job fails on connection to target db - works in debug

the ongoing saga...
I have a web application developed through VS 2012 which has a button on a form that when operated starts a SQL Server agent job on the server that runs an SSIS package. The website and the instance of SQL Server with the agent and SSIS package are
on the same windows 2008 r2 server. When the button is operated no exceptions are raised but the SSIS package did not execute. The SQL Server Agent job owner is sa ...that seemed to resolve some issues as originally I had the owner being another
admin on the same box. Now the job seems to be failing on connect to the target database on an IBM iSeries DB2 server. The job runs fine in debug connecting to the db and doing its task successfully.
The log indicates that the user specified in the connection manager is using an invalid password or is otherwise unable to connect, although it works fine in debug mode and save password is specified.  I use BIDS remote desktoped to the server
when developing and debuging.
Can anyone show me whats wrong now? Thanks much in advance for any help, Roscoe
The log shows as follows...
The job failed. The Job was invoked by User DOMAINNAME\myuserid. The last step to run was step 1 (Step1).,00:00:00,0,0,,,,0
06/12/2014 13:34:50,runWebDevSmall,Error,1,NTSVR59,runWebDevSmall,Step1,,Executed as user: WINDOWSSERVRNAME\SYSTEM. Microsoft (R) SQL Server Execute Package Utility Version 10.0.5500.0 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights
reserved.    Started: 1:34:50 PM Error: 2014-06-12 13:34:50.31     Code: 0xC0016016     Source:       Description: Failed to decrypt protected XML node "DTS:Password"
with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error:
2014-06-12 13:34:50.84     Code: 0xC0202009     Source: vbTestsmall Connection manager "iSeriesname.DBNAME.iSeriesuserid"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE
DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "IBMDA400 Session" Hresult: 0x80004005 Description: "CWBSY0002 - Password for user iSeriesuser on system iSeriesname is not
correct ". End Error Error: 2014-06-12 13:34:50.86     Code: 0xC00291EC     Source: clear iSeriesname libraryname tablename Execute SQL Task     Description: Failed
to acquire connection "iSeriesname.DBNAME.iSeriesuserid". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error DTExec: The package execution returned DTSER_FAILURE (1).
Started: 1:34:50 PM Finished: 1:34:50 PM Elapsed: 0.703 seconds. The package execution failed. The step failed.,00:00:00,0,0,,,

Hi Arthur, Thanks for the reply,
BIDS would not let me save the package with ProtectionLevel of ServerStorage giving error...
Failed to apply package protection with error 0xC0014061 "The protection level, ServerStorage, cannot be used when saving to this destination. The system could not verify that the destination supports secure storage capability.". This error occurs when saving
to Xml.
(vbTestsmall)
...but it would let me change the ProtectionLevel to EncryptSensitiveWithPassword so I did that and provided the jobstep in the agent with the password and the agent was able to run successfully.
Thanks for all the help...I will follow your blog, Roscoe

Failed to connect to database ONLY at the first time

Hi all, I installed Discoverer 10g version and I'm using an Application User to connect to the server where's the Db is installed.
Every time I try to connect to the server with Discoverer Viewer or Desktop I have a curious behavior....
ALWAYS but ONLY the first time I try to connect I have the following error :
- Failed to connect to database - Unable to connect to Oracle Applications database: invalid username/password.
If I try to re-connect again the second time it works perfectly !!....so, I think, there's nothing related with my .dbc file.
I tried also to write the ':' at the end of the user name....but it didn't work.
Into the pref.txt file doesn't exist a parameter like DefaultUserTypeIsApps to set....
Anybody have had the same "strange" behavior and found a solution or workaround ?
Thanks in advance
Alex

Thanks for your answers first of all !
At the end I found the solution looking at the Note:307167.1 on Metalink:
Discoverer Plus 10.1.2 Fails with ORA-1017 Error On First Login Attempt Then Works On Second Attempt
This note is very useful but into the solution the point 3 is not correct !
3. Modify the servername parameter to indicate the fully qualified servername.domain
Example:
An httpd.conf setting of: ServerName my_servername.mydomain.com should match a Discoverer Plus URL like http://my_servername.mydomain.com:7778/discoverer/plus
I had this problem both with Viewer and Plus...so instead to change the server name parameter (into the Apache/Apache/conf/httpd.conf file) with my complete URL (http://gnvdev.ote.gr:7779/discoverer/plus), I just write my right server name:
Example
After the installation of the Discoverer 1og server, into the httpd.conf file it was written automatyically: ServerName gnvdev
I just modified in ServerName gnvdev.ote.gr and both Viewer and Plus started to work perfectly at the first time.
I hope that this hint will be useful for you and others in the Discoverer forum !!!
Best Regards
Alex

Failed to connect to DDE Server Acrobat XI Pro Windows 8.1

I had installed Acrobat XI Pro on a Windows 8.0 notebook computer and it was working fine. When I upgraded to Windows 8.1 a few months ago, I started getting intermittent problems/error messages when I would try to open a pdf file by doubleclicking on the file either in a folder or on the desktop. The file wouldn't open and the error message was "Failed to connect to DDE Server." I can still open the files by doing a File, Open from inside the software, so it's not an insurmountable problem, just annoying. Any suggestions on how to fix this?

Hi TreeLady ,
Thanks for posting on forums, DDE server was a part of Windows XP, it was removed from Windows Vista and above. However, if you are getting this error in Acrobat, try the following.
(This error occurs when you have more than 1 process of Acrobat running)
1) Go to the task manager by presiing Ctrl+Alt+Del
2) Go to the processes in Task Manager
3) End all processes related to Acrobat
4) Launch Acrobat again.
Also, to find the root couse or to isolate the issue you can try the following.
1) Click on start
2) Type RUN
3) Type MSCONFIG
4) Go to services
5) Hide all Microsoft services
6) Disable all Services (Except Microsoft)
7) Restart your machine
8) Launch Acrobat to check if you get the issue.
This would help us to understand if Acrobat or any other third party process is not allowing Acrobat process to end causing a conflict .
Thanks,
Vikrantt Singh

Mac RDP Client (v8.0.10 on 10.10.1): HTTPEndPointException: 4, The non-proxy http connection failed to connect with the message: 404 Not Found

My office is setting up a new gateway server. I can connect to the old one just fine, but the new one is not allowing me to connect. I can connect from my Windows VM, but not my Mac Client.
This is the log:
2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
screen mode id:i:0
use multimon:i:0
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
[2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
    User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
    User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
Found
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
And here's a log for server that I can connect to:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:20] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
[2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
    User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:25] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:25] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
[2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Nov-26 15:52:29] RDP (0): Server hides cursor
[2014-Nov-26 15:52:31] RDP (0): Server shows cursor
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated.

Hi Jeremy,
Thank you for posting in Windows Server Forum.
From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
Configuration used and full address name both appears different so please verify configuration accordingly.
Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
You can follow below guide to configure RD Gateway and after that verify the result.
1. Deploying Remote Desktop Gateway RDS 2012
2. How To Work with RD Gateway in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Failing to connect to desktop. Sony DR-BT22 Wireless Headset

Similar Messages

Maybe you are looking for