Failing to connect to paired Bluetooth device

New User
I am trying to connect to my Landrover  handsfree
I have use this before with other hansets without problem
Just sometimes it connects automatically, but 90% of the time it fails, even when I try to connect manually I can not get a connection
Any Ideas
Dave W

Same problem and its not the car - its the new software on the balckberry, but can I find anywehere to download older software or advice on what to do - No!! Good Luck...
Frustrated, carole

Similar Messages

  • I've found two bugs in iOS 7. 1) declined calls does not appear as missed calls on the lock screen/notification centre. 2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device

    I've found two bugs in iOS 7:
    1) declined calls does not appear as missed calls on the lock screen/notification centre - iOS 7.0.2.
    2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device automatically - iOS 7.0.

    We are all users here, just like you, but you can tell Apple about it by using this link:
    Apple - iPhone - Feedback

  • Its a 5S,I couldnt automatically connect to an already paired bluetooth device the next time.Have to forget that device then re establish each time.Am i missing any setting that does it ?Also

    Its a 5S,I couldnt automatically connect to an already paired bluetooth device the next time.Have to forget that device then re establish each time.Am i missing any setting that does it ?Also if i turn on the bluetooth via settings and turn off it via control center,the settings page still reflects its on ,is that a bug in IOS ?

    What kind of Bluetooth device?
    When you turn it off in Control Center, are you looking at the Settings page? If so, you need to close control center for it to reflect the change. When you turn Bluetooth off in Control Center and look on the Status Bar, what do you see? Do you see the gray Bluetooth icon? If you have Settings closed and turn Bluetooth off on the Control Center and then open the Settings app, do you still see Bluetooth enabled?

  • HT1665 I am trying to connect my Samsung Bluetooth device with my new Iphone 4S.  Can anyone explain how this is done?

    I am trying to connect my Samsung Bluetooth device to my new Iphone 4s. Can anyone explain how this is don?

    Which Samsung Bluetooth device?
    Please note that the iPhone will not pair with other phones, tablets, etc for purposes of file transfer.

  • TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work).  "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
    That will let you select the "turn on Bluetooth" icon.

  • BlackBerry Media Sync Failed to connect to your BlackBerry device

    I am trying to successfully sync my blackberry bold 9000 with itunes via the BB media sync program. I have successfully installed desktop manager and can sync contacts, email, add applications and can sync via Roxio media manager (painfully though). However when I open BB Media Sync I get an error Msg saying 'Blackberry Media Sync Failed to connect to your blackberry device - Retry or Cancel' It displays the device PIN in the window but still says please conect a blackberry device. I have mass storage mode turned on, media card support, USB drivers installed and have checked the media card is inserted correctly. When I try to find my blackberry in 'My Computer' it does not appear to be there either. What am I doing wrong?? Please help

    Hi....
    read this post and see if that works for you...
    http://supportforums.blackberry.com/rim/board/message?board.id=Bold&message.id=1614&query.id=19721#M...
    Cheers
    M
    Need additional information on BlackBerry products?
    visit: http://www.blackberry.net

  • HT4993 Well I got a iphone 5 black 16gb and well the iphone it won't connect to a Bluetooth device and the iphone 5 it won't last long the battery

    Well I got a iphone 5 black 16gb and well the iphone it won't connect to a Bluetooth device and the iphone 5 it won't last long the battery

    What bluetooth device?
    It supports stereo speakers/headsets, handsfree telephone devices/headsets, some keyboards, some peer-to-peer apps, and internet tethering if provided by the carrier.

  • After connecting to my bluetooth device, "Devices" keeps spinning on iphone

    After connecting to my bluetooth device, "Devices" keeps spinning on my new iphone. I don't want it to keep looking for more devices.
    How can I stop the spinning?
    Thanks.
    iMac 2GHz 2 Intel Core 2 Duo iOS 4

    Exit from Bluetooth settings. As long as the Bluetooth Settings app is open it will search.

  • HT-CT80 turns off every 15 minutes when connected to a bluetooth device

    Hi, My HT-CT80 turns off every 15 minutes when connected to any bluetooth device. Is that the auto standby feature? If its connected to a bluetooth device, I guess it is receiving input? Any suggestions please?

    Hi sumitr,
    You may try resetting your device.
    Kindly follow the steps below.
    For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • Not able to connect to any bluetooth device

    Hi, With my Xperia C4 I can pair with every device I can find. But when trying to connect to a device.No connecting will get establised.I've tried a car bluetooth device (Toyota Touch and Go), an Ipad and a Xperia P.The Xperia P said the connection was established and then directly disconnected.My car will just say connection failed. Does anybody has a solution to this problem?

    In case of my Car a connection to using teh bluetooth connection to answer calls, streaming music and accessing the android contacts and messages on my Car. In the Bluetooth menu, I can see my paired devices. But when I am in range with the device no cennection will be set up between the two devices. When press on the device in the bluetooth menu. in smaller type it says (in Dutch "Verbinding maken" meaning "creating a connection") but then the message will disapear and no message with "connected" will show. And no Calls or music over Bluetooth. 

  • How do I find the MAC address of a paired bluetooth device?

    I have just connected a bluetooth device to my MacBook.  When it was pairing, it displayed the MAC address of the device, but a few seconds later, the MAC address was replaced with a test description of the device.  I need to figure out what that MAC address was.
    For clarification, this is not an ethernet connection, it is Bluetooth.  The device is a type of headset, it has no use accessable interface, and no the address is not on the device itself.
    Thanks,
    -- JC

    Open System Preferences > Bluetooth
    Select the device on the left.
    Then click the asterick with a downward facing arrow then click More Info.
    The Addrress will show on the right.

  • Lumia 620 fails to connect to car bluetooth - coll...

    My lumia 620 did initially connect to my ford focus car audi/phone successfully.  However after about a week it failed to connect and I haven't been able to connect since. Defeats the object of hands-free!
    Steps taken (which work with previous phones of various makes/models):
    Turn bluetooth on in car
    Turn on phone bluetooth connectivity
    Car display finds my phone successfully and provides a PIN to enter in the phone
    Phone bluetooth status says 'unable to connect to ford audio system' and times-out.
    I've noticed that the 'tap to pair' message doesn't appear as it previously did and I can't find anywhere else to look for bluetooth settings.
    A colleague who has an identical phone can successfully connect - it does show the 'tap to pair' message.
    I have updated the ford audio system software and checked the other phone connects ok. I have also tried removing the phone battery several times but still no joy.
    Help please - thanks

    Hi Roshanrims,
    Thank you for reaching out to us. Let's go with the connectivity issue first. Are you getting the same issue when you connect your phone to another PC? To further isolate the issue, you can try other troubleshooting steps found on the below link:
    • The cable connection to my computer does not work
    Note: The link is intended for the Philippines. Let us know your location so we can give you the correct link.
    As for the Project My Screen, see this: Project my phone screen to a TV or PC.
    We look forward to your reply.

  • Why won't my new iPhone 6 connect to some bluetooth devices automatically?

    I purchased my iPhone 6 (64GB) last month and have been having trouble with it connecting to bluetooth devices ever since. I have to most up-to-date software (8.1.2). I listen to a lot of music and have multiple bluetooth accessories that I use to connect with my phone for playback. Because of this I always leave the iPhone's bluetooth turned on. The main problem I've been experiencing is automatically connecting to devices that have already been paired and saved to the phone's "My Devices" list. I drive a 2013 Subaru Crosstrek and while I had my iPhone 5 (with iOS8) I could hop in the car, turn it on, and since the bluetooth in the phone and car were both already turned on (and had previously been paired) they would automatically connect and I'd be listening to music immediately. Now, with my iPhone 6, that does not happen. I get in my car, turn it on, and with bluetooth turned on in the phone and the car I get no automatic connection. If I go into my phone's settings and manually select my car's bluetooth sometimes it will make a connection. Other times it won't and I actually have to forget the car on my phone and re-pair the two devices. (Once the phone is finally paired the bluetooth connection works perfectly.) This is extremely time consuming and annoying, and most definitely not the way these products are meant to function. I've tried lots of different ways to get around this. I've reset the phone's network settings, and have done a full system restore. At this point I'm not sure what else I could do other than going in and talking to someone at a Genius Bar. Has anyone else had this issue?  

    Hi eighty1camaro,
    Welcome to Apple Support Communities.
    The article linked below provides troubleshooting tips that’ll resolve most issues like the one that you’ve described, where you iPhone 6 doesn’t automatically pair with your car stereo.
    iOS: Troubleshooting Bluetooth connections - Apple Support
    Cheers,
    -Jason

  • How do you connect to a Bluetooth device

    I have anipad3 an iPhone 4 and an iphone4s but cannot get them to pair. Used settings general Bluetooth on says it is discoverable and searching but nothing comes up?

    For what purpose are you trying to connect them?
    Bluetooth between iOS devices is only available in specific circumstances. For example, with a compatible peer-to-peer app installed on both devices.

  • 6230i connectivity to Motorola Bluetooth device

    I am trying to get my new 6230i to connect to my Motorola Bluetooth device. The phone sees the Bluetooth in my Audi A6 and works fine. And, my prior phone, a 6230, sees both the Audi and the Motorola earpiece just fine. But the 6230i doesn't find/pair with the Motorola unit...any suggestions would be much appreciated...
    John

    Hi insightfulone
    Did you go to Menu > Settings > Connectivity > Bluetooth > Bluetooth = On and then Search for audio enhancements?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

Maybe you are looking for

  • Why does this EPS graphic in my title keep disappearing?

    Someone sent me a logo in the form of an EPS file. I used it in a title frame and it was visible both in the title and when I put it in my timeline. Then I went to watch it and it wouldn't show up. I did it a second time, recreating the title frame,

  • Event 1000 and event 1026 Faulting application name: DistributedCacheService.exe

    I have 2 WFE, 1 App,  all 3 Distributed Cache in Services On Server of CA are started,  but only 2 AppFabricCachingService are started on 3 server Services. When I go to notable server which AppFabricCachingService not started, found the application

  • How to Save Global Contacts in our CM or Voice Gateway

    Hi we have a UCM6.1.2 and a H.323 voice gateway we get many calls from different vendors and so on i want to some how assign a contact or a name to the calls that come in often for example if we get 100 calls from 973-333-3333 i want that number to s

  • Mission control error when starting

    I receive error below when I start mission control. Can someone assist? $ export JAVA_HOME=/usr/java/jrockit $ export PATH=$JAVA_HOME/bin:$PATH $ /usr/java/jrockit/bin/jrmc Jun 15, 2008 12:14:00 PM com.jrockit.console.model.ConsoleModel initializeSet

  • Replacement string variable in data form

    Hi everybody, in Planning 11.1.2, is it possible to set a replacement variable, with type String, and then use it in a data form to let the user inserting a string value (i.e "actual")? I need to reuse the value inserted in a business rule. I think t