Failing to copy informatio​n from usb device to hdd or from disc to hdd

I have a lenovo t530 running on windows 7 64bit. of late i can not copy information from external devices such as cd dvd or flash drives. please assist. i ran a hardware scan and its giving me error code WHD01V012-WJUZGI

Does copying the other way work?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

  • Can Solaris 10 boot from USB devices like USB thumb?

    1. Any live CD build for Solaris 10? That's the one which can boot up from CD and run immediately.
    No installation requirement.
    2. Can Solaris 10 boot from USB devices like USB thumb?

    You can find "live" CD and DVD images at OpenSolaris site: www.genunix.org/distributions/belenix_site. This OSolaris version is booted from CD/DVD drive and can be permanently installed on HD drive. Moreover You can find at this site suitable script for USB thumb preparation. However You should remember that the number of read/writes on USB thumb is limited (ca 400 and slightly more in more expensive versions).
    Good luck.

  • So if iMessages deleted from one device are not deleted from others why not recover deleted iMessages from iCloud?

    I accidentally deleted ALL the messages from my wife from my iPhone, nearly all of them iMessages.  Yet, I can see all of them on my iMac and on my MacPro.  Indeed, there is a discussion item (https://discussions.apple.com/message/21313040#21313040) that confirms that messages are deleted and maintained independently on each device, even though they are all ultimately resident only in Apple's cloud.
    I would dearly love to have all of them back on my iPhone.  Yet, reading about 20 or so discussions here, the only way to recover them would be a recovery from my iTunes backup.  I have a somewhat recent backup, but I'll still lose about 100 messages that way.
    So, if all the messages are still in the cloud, why CAN'T I recover them directly from the cloud to my iPhone?  Any ideas?  Any software?  Is this an App just begging to be built??
    Thanks

    It depends on the type of email account you are using, not on iCloud.  If you are using an IMAP or exchange account, when you delete from one device, it is deleted from all devices.  If you are using a POP (POP3) account, it won't.  (iCloud email, Gmail and Yahoo are all IMAP accounts.)

  • I tried to access my books on my IPad through the Kindle app. The message reads Please remove the book from your device and redownload it from your Cloud items if possible.  I the problem persists trrey to deregister your applications and reregister it

    I tried to access my books on the IPad Mini through the Kindle app. The message reads "Please remove the books from your device and redownload them from your Cloud items if possible.  If the problem persists, try to deregister your applications and register it again."

    When the Kindle app was updated - none of my books showed up on my iPad. Here is what I did and I did it all on the iPad.
    Go to amazon.com
    Sign into your account
    Tap on - Your Account - in the upper right  corner
    Tap on Manage your Kindle - next to the Digital Content section on the left side.
    Find your books in the next window
    Tap on the Actions Icon next to the book title
    Tap on deliver to - select your iPad
    Go back to your Kindle app and see if it downloads

  • Boot from usb device on hp elitepad 900

    Hello, how can I boot from USB flash device on the hp tablet elitepad 900?

    You have to create a bootable USB drive and then copy the bootmgr.efi from an Win7 machine to the USB drive.  I ran into this issue when I reinstalled the OS on mine and it was a pain to figure out.

  • Imac 21" mid 2011 can not boot from USB device?

    Hi,
    hope someone can help me.
    Bought the new imac 21" and replaced the superdrive with a ssd drive.
    Works great but it seems that the imac is not able to boot from any usb device.
    I put my osx install disk in my external dvd drive and powered my mac.
    While booting up (pressing cmd) the mac does not recognize my external dvd drive. This works great with my MBP late 2008. But the imac can not boot from the dvd drive. Also pressing "c" while booting does not work. Doing that a grey screen appears and after some time mac boots from hdd.
    So i installed mac os via target mode over firewire withbmy old imac. This works.
    But now i want to install windows on a bootcamp partition.
    I can't boot from the windows 7 professional dvd, too. So i tried to create a bootable win 7 thumbdrive. Mac can't boot from this too. Reading many threads in some forum i tried with rEEfit. Reefit shows the usb thumbdrive whike booting, but using this will end in a black screen error from bios: "no bootable device....". Tried a knoppix on the usb thukbdrive, too.... No bootable device....
    It seems that there is no way to boot from ANY external usb device like dvd drives or thumbdrives......
    What more can i do? I tried for 2 evenings now, but nothing worked out for me......
    Currently i don't see any any to install win 7 without an internal superdrive, but can this be??
    Thanks for any comments.
    Kwicks

    Internal is definitely the easiest but you can boot from external HD or external optical drive, the mac is just very picky on what works and what doesn't.
    For an external drive or usb stick it has to be GUID partition table and have 10.4.5 or better installed on it, for more info check this link out ( http://support.apple.com/kb/ht1948 )
    Hope this helps,
    Joe

  • Log and Capturing from USB device?

    I have a VHS connected to my G5 using an InterView RCA to USB device. Is it possible to log and capture into FCP5? I seem to be getting the sound okay, but can't get the video.

    You can't capture to FCP without timecode.<<</div>
    Not true. You can easily capture non-timecoded footage from any number of sources, including VHS. Set FCP's device control to "Non-Controlable Device" and use "Capture Now." The source player will need to be connected to your DV device (camcorder, VTR or converter).
    VHS decks don't generate timecode<<</div>
    Also not true. Most pro VHS and S-VHS VTRs have both VITC and LTC capability.
    -DH

  • W520: Unable to boot from USB - device does not show up in boot menu

    I have a W520, and I am trying to boot from a USB key. The USB key is bootable, my old T61p boots just fine from it, and so does another computer I tried.
    The W520, after pressing F12 on power on, immediately shows the Intel PXE agent and then some blue boot menu, which only shows hard drive and LAN as available boot options.
    I have tried all three USB ports but the results are always the same - the USB device does not show up. Is there any trick or BIOS setting to enable boot from USB?
    Thanks,
        CS 

    Hello Neil
    Thanks for getting back to me
    The issue was that the usb drives were disabled in the bios from the  Startup menu.
    To enable
    1. Enter bios
    2. Select boot
    3. If you do not see the boot device you require use the down cursor key until the "Excluded from boot priority order" becomes visible.
    4. Select the device you require (in my case USB HDD)
    5. Save and exit.
    You can now boot from a usb stick and install the Linux distro of your choice :-)
    Cheers

  • Read and write to an USB device without any products from NI

    Hi!
    Is there any possibility to read an USB device and write to it without any NI products?
    I want to measure temperature with several sensors from Dallas (DS18S20).
    I'm using Labview 8.2.
    Thanks for your help.

    Hey, I have never used Dallas sensors but I just used Google and found this which might help you.
    Also here you can find some basics of using USB in LabVIEW. But USB communication is always a bit tricky. Have fun
    LV 2011, Win7

  • T400s Fails to shutdown when docked AND usb device connected to Dock

    Title says it all, have a T400s running Windows XPSP2 that shuts down and or reboots fine UNLESS it is connected to a docking station with any usb device attached (to the dock). BIOS has been flashed, machine built from scratch using enterprise license and latest drivers from Lenovo's website. Microsoft patches have also been applied.
    Any clues?

    We had a Lenovo tech on site today to see this problem.  The problem seems to show when there are USB devices in the dock and the camera software is installed.  If you uninstall the software or remove all of the USB devices from the dock then the laptop shuts down properly.  We tried two different USB mice as well as a flash drive and came up with the same result each time.  Even with the camera software removed from the laptop the integrated camera still works in Windows through the camera center.

  • Mega 651 USB devices disappearing after wakeup from Hibernate state - HELP!

    Hi All,
    I still have this problem where when I wake up my Mega 651 from a hibernate state my USB devices seem to get uplugged or ejected. The usb ejected/unplugged window appears also.
    This wasn't too much of a problem, however, my PC is now on a network and when my usb devices are unplugged such as my UPS or shared printer a broadcast message is sent to all network PC's.
    I've also started using my card reader as I now have a digital camera, but annoying when the card reader is ejected all the time.
    I'm running Windows 2000 SP4 with all updaes.
    If anyone can help me solve this problem it would be a great help.  
    Also the card reader access light stays on sometimes after shutdown, why is this?
    Many thanks,
    Mo
    MSI Mega 651
    P4 2.8GHz 533 FSB
    Akasa Expansion Slot Exhaust  Blower
    Akasa Pax Mate II in case sound insulation
    1Gb Corsair Matched pair DDR RAM
    MSI FX5200-VT128 nVidia Personal Cinema
    MSI DR16-B DVD writer

    Suspend has always been problematic under Linux. It seems to be hit or miss for the most part, but here are some things you can try:
    Use an LTS kernel, tuxonice, pm-utils, etc. See Suspend and Hibernate
    Try a different graphics driver
    Tweak the driver module parameters or build your own driver.
    Unfortunately I don't have experience with the radeon driver, so I can only give you ideas.

  • Satellite M40 (PSM42) - Start from USB-Device

    In the BIOS of my Satellite there isn't any choice for starting with USB (only FDD, HDD, CD....). Is there any possibility to use a USB-HDD for startup (instead of the internal drive)?

    Hi
    You can only boot from this devices:
    USB FDD, Primary HDD, Optical devices, Network (LAN)
    You can not boot from the USB HDD.

  • MSI 875P Neo-FIS2R support booting from USB devices?

    I am building a super computer using the MSI 875P Neo-FIS2R. I would like to either get a USB pen drive, or an external Floppy Disk Drive in place of an internal Floppy Disk Drive.
    Does anyone know if this board supports booting from a USB device?

    I ordered my board as well, however, they were out of stock and it may be as long as 2 weeks before they get more in. If you don't mind me asking, where did you get yours from? I am VERY much excited about getting this board as I only await the MB and CPU. What all are you putting in yours??
    Mine:
    MB-   Obvious
    CPU-  2.4 800Mhz
    RAM-  2 sticks, 256 PC 3200 XMS Corsair using dual channel, at first I think I will use the 512 pc3200 I already have though.
    HDD-  80GIG W/D 7200 RPM ( May get another to run RAID 0)
    VGU-  Chaintech TI4200 at 8x w/ 128 DDR
    CD#1- 52x cd rom
    CD#2- dvd 16x, cdr 48 cdrw24 cdrom 48
    500W raidmax Pwr Sup
    Koolcases Panther case w/ window and 3 80MM/ 1 60MM fans
    For now I will even use the old 3.5 A drive. Just in case.
    Red light internaly
    Digidoc 5 for thermal monitoring on:
    1.cpu  2.ram  3.VGU 4.case 5.HDD 6.other ram 7.chipset 8.dvd for curiousity sake. just curious of the temps they produce. but always able to move it to a more vital area if the need arises.
    Will be upgrading to liquid cooling in the future, that way when I am deployed the temps stay in the blue. (HOPEFULLY)

  • Boot From USB Device

    can the kt4 Ultra boot From a USB device like a flash drive

    why post in the nforce forum to ask about a via board?

  • Booting from USB device

    Hello. I'm having the following problem:
    My laptos in a HP Pavilion Sleekbook H14-b164la
    I'm trying to boot from an USB device since my laptop lacks an optical drive, in order to install an OS (Ubuntu) alongside with the included already in the PC (Windows 8).
    I've made the USB bootale using UnetBootin and tested it in my desktop PC, and it worked just fine. On the contrary, while trying to try it on the laptop, it never booted from the USB drive. It always went straight for Windows.
    I've set the bootable order right (both first USB Diskette on KEY/USB Hard Disk, and also USB CD/DVD Rom Drive) with and without the Legacy Booting enabled.
    I've ran out of ideas. Please help.
    Thanks in advanced.

    Thank you for your response, but you can be a little more specific.
    Should I or should I not disable Secure Boot? I've tried both ways, still nothing.
    Also, on the Boot Manager it doesn't appear the option for USB. In fact it only gives two options:
    OS boot Maganer
    Boot From EFI File
    When I select the latest, it gives two more options (which seems to be the usb i've got plugged in, but if I choose any, in kinda goes inside and start browsing it's folders, I don't really know.

Maybe you are looking for

  • SAP MDM Joining tables in console? Help needed.

    Hi, I am placed in SAP MDM Project. Currently, we have an unique requirement. We, have to join two tables of SAP MDM Console in an unique field named(House No and PO Code). Actually, we have a main table named Business Partner and a Flat table named

  • Is it possible to add a number of PDF files together?

    I have found a book on Oxford that has not been published and I have the permision of the writers widow to attempt to get it published.  It is in loose leaf format, roughly 400 pages and I have scanned it in OCR and PDF. The problem with OCR is that

  • How do you fix the sound that's not working on an iPad mini?

    OK so the sound on it does not work. It's turned up all the way but nothing is still coming out. When I plug headphones into it, it works just fine and normal but without it, nothing. I looked up on google at the options of how to fix this and they p

  • "iTunesHelper was not installed correctly. Please re-install iTunes." Error 7

    For a few weeks now(almost a month), I have been trying to get my iTunes to work. When the new iPhones came out, it went haywire. It brings up an error that I cannot open iTunes because "iTunesHelper was not installed correctly. Please re-install iTu

  • Creating key figures in report writer

    Hello, i'm making a new report painter/ writer and i find a problem. The process that i've made already is: 1- create a view table with the tables i need. 2- make the corresponding entries into T804A and T804E tables. 3- I create the library for my Z