Failing to install driver of SB Live! B880

*Failing to install driver of SB Li've! B8808Hello!
I switched from Windows XP to Windows 7 and now I need to reinstall my Creative Soundblaster Li've! B880, which uses the?EMU0K sound processor.
I can't find the installation CD anywhere in my house, and I've tried all kinds of drivers including?<a target="_blank" rel="nofollow">Li'veDrvUni-Pack(DUT).exe[/url]?(this should be the one..) and others. They all come back with the same massage:
"The installationprogram was unable to find a Sound Blaster soundcard in your system. Make sure it is installed properly." (free translation from Dutch)
When I go to Device Management I see 3 things not installed, but I can't get the right driver anywhere..
Can you please help me?!
Kind regards,
Ren?

Hi! Try this driver package (from modder "daniel_k")
http://forums.creative.com/t5/Sound-Blaster/SB-Li've-series-Support-Pack-2-0-04-30-200/m-p/55606#M5480
Hope it hel
ps.

Similar Messages

Fail to install driver HP1050 deskjet for windows 8 when connecting printer with computer

I have this great HP desket 1050 printer for less than a year. My computer broke down so I bought a new one, but now with windows 8.1. So my printer was not working anymore, I fail to install my new printer. I can install the driver for HP1050 deskjet, but then there is a moment that you have to connect the PC and printer with an USB cable. This is the moment that the installation fails, nothing happens when I plug my printer into my PC. So I never finish the installation process complelty. The same thing happens when I choose add printer later and then add my printer. My printer is on and the cable is well plugged in. Anybody any suggestions as I would like to use this printer again. Thanks in advance

Hi @Annemarie85
I understand you are unable to complete the installation of your Deskjet 1050.
Please use the following document to troubleshoot the issue, and let me know the outcome of your efforts; Windows: 'Device Setup Failed to Complete' or 'Unknown Device' Message Displays on the Computer Duri....
I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Cant install Driver - Creative SB Live! 24-bit - windows 7

:Cant install Driver - Creative SB Li've! 24-bit - windows 79 I have:
Audio Adapter? Creative SB Li've! 24-bit (CA006) Integrated Audio Processor on MSI motherboard
Cant install driver on Windows 7 (OS Version 6..7600).
I tryed?
P7X_SupportPack__6
Audigy_SupportPack_2_0
SB24_W7DRVBETA_US__04_0090
And none of these drivers work.
Can some one help me please.
<img width="880" src="http://img253.imageshack.us/img253/6099/creative.jpg" height="09[/img]
Message Edited by Vecera on 07-28-2009 02:5 AM

You need to obtain the drivers from your motherboard manufacturer. The drivers you have downloaded are for STAND ALONE cards only, not for integrated motherboard sound cards. I do know that Gateway and other manufacturers have these bundled with their systems. Try here also for a tweaked driver/install package......
http://danielkawakami.blogspot.com/
{****Edit of my own message*****)
I looked for MSI motherboard drivers for that integrated Creative chip and the ones I found were not! for Windows 7. That is why I hope Dan K.'s drivers help you. I have not used that specific Creative onboard chip, so I do not know if Dan K.'s drivers will install. But users in other forums say his package works better than Gateway's inside Windows 7/Vista.
After looking for the options for downloads, I see that there are some drivers out there for integrated realtek/Creative MB software and there are X-FI extreme audio cards that come separately with motherboard that plug in like a standalone sound card. Again, you should check on the MSI home page for their newest drivers. The Creative drivers available straight from Creative may not have your sound card's ID in the driver files for "retail cards" that they have drivers up for. Daniel K and other modders add the proper hardware manufacturer IDs to their driver packs so you can install their ALL IN ONE packs on your system. But I have not seen any users talk of doing that.
Message Edited by jmacguire on 07-27-2009 :24 PM

PLEASE HELP: Cannot Install Driver For SB Live CT4

Hi, guys. Any help would be GREATLY appreciated.
My computer's pretty old. It's a Dell Dimension 8200 that I bought in 200.
I recently did a fresh install of Windows XP, because I like to do so every half year or so to keep my computer running smoothly. This time, however, for some reason it's been giving me issues with detecting the sound card and whatnot.
I opened up the motherboard and it says the product model is the Creative Sound Blaster Li've! CT4780. I went to both the Dell and Creative support pages to download/install the appropriate drivers, but every time I do so I am incessantly barraged with the following message:
"Setup could not detect any Sound Blaster Audio Card on your system. Please ensure that your Sound Blaster hardware is properly installed before running this setup program. Setup will now exit."
I have no idea WHY it's not detecting it, so I opened up the motherboard again and made sure the sound card looked to be securely in place. Still, I get the same message.
Also: when I go to Start > Settings > Control Panel > System > Device Manager, I don't see my sound card listed there. I DO, however, see a category for "Other Devices" (with a question mark beside it) that lists "Multimedia Controller" and "Multimedia Video Controller."
Could "Multimedia Controller" be my sound card?
I don't know if I'm making any sense here. Please, please help!

Are you trying to use the disc or did you download the most current set of drivers from the HP website?
Here is the most recent version of the full feature drivers for your printer and OS:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-73705-2&cc=us&dlc=en&lc=en&...
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer s

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer service rep gave me a link to download off the Adobe site, but when I try to open the file to run it, I get this error message - "A problem occurred extracting the archive".
Can anyone help?

Yep. Nothing happens at all. Windows tries to execute the uninstaller, but I don't get any other screen and all activity stops for the MSI. I monitored it in Process Monitor and the MSI executable appears, but is quickly ended, like it couldn't find anything or something.
It's as if windows has a blank entry in Programs and Features, because it used to show the size of the Adobe application in the "Size" column. Now it's just blank. Link to screenshot below:
http://img829.imageshack.us/img829/5006/screenshotcaf.jpg
Note the install date. That's when I was able to successfully reinstall it. Now I can't even do that. I should also mention I tried Revo Uninstaller. It deleted one small registry key, but nothing changed.
By the way, is the CS cleaner supposed to ask for a disc in the drive when you run it? It refused to run unless I had one in it, so I used my install dvd.

WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"

Summary:
I have installed Windows 7 Ultimate x64 on my G580. Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
Details:
I bought lenovo G580 with Windows 8. Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64. Everything is working fine but my WLAN card is not recognized because of lack of driver.
The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error. I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
Error - "BCM4313: Can not find setup file"
Drivers Tried:
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028105
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028208
Any help about how to get past this error will be appreciated. The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder. Let me know if I can copy a specific file from there.
Thank you.
BJS
Solved!
Go to Solution.

Download this driver bcm4313
Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.

My computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?

my computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?

Hi there croadstar,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W.

USB Console (Serial) Driver fails to install on Windows 8.1 x64

The USB console cable driver v3.1 will not install on Windows 8.1 x64. Had a similar problem with Windows 7 x64 but this was fixed using Greg's (greggar25) excellent step-by-step procedure (see post: https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing).
I am using the driver from this link: http://software.cisco.com/download/release.html?mdfid=282774228&flowid=7442&softwareid=282855122&release=3.1&relind=AVAILABLE&rellifecycle=&reltype=latest
I followed the same procedures I did for Windows 7 and the install goes without a hitch. Reboot and connect the USB cable, opened Device Manager and now I have a COM Port randomly appearing and disappearing with its number incrementing well above 1,000.
A few times while it appeared for a few seconds, I was able to right click on the properties, update the driver and chose Cisco Serial and it settled down but it did not assign a COM port. Then a few seconds later, it starts the disappearing/reappearing thing again.
Anyone have luck getting this to work with Windows 8.1 x64?

Hi,
open Device Manager by simply typing the words on the Windows 8.1 Start Screen. The Search Charm opens and click Device Manager in the displayed list.
In Device Manager a new hardware category, CiscoUsbConsoleWindowsDriver, is displayed. It has two components: the Cisco Bus enumerator and the Cisco USB to Serial adapter. Expanding the Ports hardware category shows a new Cisco Serial port.
or
Look into below
https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing
1) Install the usb console driver\windows 64\setup(x64)
2) Follow the wizard and accept the defaults
3) Restart the computer (the installer usually says it needs a restart)
4) After restarting the computer, plug in the usb cable
5) The computer should say installing Device driver software and fail at the Cisco Virtual Comm Port00
6) Click the Windows button, right click computer, manage
7) Under Computer Management, Click Device Management
8) Go to Ports (COM & LPT)
9) You should see the Cisco Virtual Comm Port00 with a Yellow Exclamation point on it
10) Right Click on the Cisco Virtual Comm Port00 and select Properties
11) Click the Driver Tab
12) Click Update Driver
13) Select Browse my computer for driver software
14) Select Let me pick from a list of device drivers on my computer
15) Choose the Cisco Serial Driver
16) Device Driver is installed successfully, take note of the com port it is using and enjoy.
HTH
Sandy

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson

Fail to install broadcom bluetooth 2070 driver

fail to install broadcom bluetooth 3070 driver on my HP pavilion g4-1007tx
error message came out was error 1935... tried reinstalling the drivers but still fail

Now look what you've done.
You've gone & gotten "all specific" so the wannabesthat like to sound important by throwing links at you, have run a mile.
Lol.
Just take it to a proper tech dude, or go to a reputable fix it yourself site like this one & don't waste your time here. (I of course got thrown here from google & cringed).
HP are legendary for having problems that develop smaller problems, immigrate to problemville and breed with other siblings of similar problems to have more problems.Wanna try tech support?? They will tell you that if its your fault (He*l, you have no idea if it was; and they know it!!!) so you won't go there unless your super pis*ed, extremely rich (odds are if your trying to fix it yourself you aint) or have had enough.
Buy a Toshiba, ASUS or Acer, anything but an HP.
My advice, uninstall & re-install it & see how you go, if your lucky it may work.

Pnputil - failed to install the driver

Hi,
I run cmd as admin, windows account is too admin, directory is OK, but I still can not install driver (for StarSign CUT device). Driver is official, and if I install driver in Explorer, everything is OK.
Windows 8.1 64bit, last upadate. HP 350 G1. On the another two PCs, everything runs good. Do anybody have some tips for solve this problem? Thank you.
D:\driver>pnputil -i -a SZCCID.INF
Microsoft PnP Utility
Processing inf : SZCCID.INF
Failed to install the driver on any of the devices on the system : No more data are avalaible
Total attempted: 1
Number successfully imported: 0

Hi Ding27,
What is the commands used on the other two PCs? Why not take use of Device Manager to install the proper drivers?
It seems to be a little problem when using the pnputil command.
You may take a try with the following:
pnputil /a /i <file path/inf file name>
Reference:
PnPUtil Command Syntax
PnPUtil Examples
Best regards
Michael Shao
TechNet Community Support

Fail to install audio driver lenovo G550 6kg

Hello,
I accidently deleted my conexant audio driver and now unable to completely intalling it back...
I downloaded the driver from lenovo site,each time it fails to install at the "drivet installation wizard" and i'm unable to finish the setup.
My os is Win 7 32 bit' home pre

hi Bar,
Welcome to Lenovo Community Forums!
Can you Open Device Manager
          right click on my computer and choose Manage
                  On Manage window select Device Manager.
Look if you have a device that has a yellow mark or a question mark.
    right click on each and choose uninstall "Place a check on Delete driver software" if it ask. restart the computer.
Computer should be able to detect the Sound device Hardware and ask you again for the driver then install this
    Conexant Audio Driver
In still does not install Get its Hardware ID and post it back here thanks,
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Xperia Z2 driver fails to install.

I have reciently upgraded to the Z2 phone, my iphone 4 was stolen. My issue is that my phone won't connect to my pc.
I have tried a pc at the phone store and it connects, so I know it's not the phone. I have pc companion on my computer as well as what I'm told is drivers for the phone in a downloaded file. I've extracte the drivers into the same file but when I search for the files via update driver computer does not find it even though I'm in the correct folder. I've searched the net for drivers via update driver, computer starts install, then tells me it fails. S1 driver fails (fast boot) D4305 fails (this is another name for the phone not sure if I got the numbers right in this post but I'm close. I've tried rebooting system, unpluging all usb devices, turning off win firewall and antivirus software. I'm not sure what's blocking the installation of the phone drivers. I'm pretty sure if I can get the driver's installed on my ccomputer, I can get pc companion to see my phone. I've got it to connect to my Null, which I assume is my phone, but when I open pc companion It's not connected, probably because of drivers. Tried connecting with phone turned off and on, turning on with up volume key pressed, debugging with developer still can't find thi issue.
Solved!
Go to Solution.

I must admit I am running out ways to get around this. The only other things I have seen block this kind of install are below:
1. Do not use a USB Hub.
2. Do you have any MP3 Player software installed for another MTP device?
3. Do you have any camera software for connecting a camera that may also operate in MTP mode?
4. The last option would be to test on another PC if possible to rule out the phone/cable as the problem.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Driver Updates failing to install

I have received a notice that my system needs a critical update which I download and install only to have it say that the update failed. This has gone on for several weeks and I have repeatedly tried to install the update both automatically as well as independently. Every time I run the update it says I need this criticalk update but it will not install. I am running Windows 8 in my computer and the product is an all in one Officejet Pro 8600.

Hello @TRC2000,
Welcome to the HP Forums!
I understand the driver update keeps failing to installing using the Officejet 8600. I will do my best to assist you! I would recommend following this entire HP document on HP Update Fails to Download Updated Drivers.
Please post your results, as I will be looking forward to hearing from you. Have a great day!
I worked on behalf of HP.

Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...

Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support

Failing to install driver of SB Live! B880

Similar Messages

Maybe you are looking for