Failing to login

I left my MacBook Pro on at night like every night. This morning I failed to login as it just stays on the blue screen forever. I forced reboot with the power button and it kept getting me back to the login screen a minute after every time I enter my password.
I forced restart with the power button and it no more gets me to the login screen.
I started my MBP in safe mode and the result is it became horribly slow after logging in and after more than half an hour the lower dock didnt show up yet. Opening a document on my desktop or going to the upper bar shows the beach ball forever then it just disappears!!! Seems to me like the memory is not there.
Surprisingly in BootCamp Windows 7 works without problems!!!

UPDATE =>
Finally I managed to have the Disk Utility to work in normal mode and after fixing a long list of errors here are the remaining unresolved errors (please note the system is very unstable, inconsistant and VERY SLOW):
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/JavaPluginCocoa.bundle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

Similar Messages

Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'

I want to grant permissions to all domain users to view reports on our Report Server. Domain users are able to access our Report Server URL and folder, but when they click on a report item they get an error message:
"Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'"
I'm using windows authentication and configured the local service account in SSReportS Config Manager as the credentials to connect to the Report Server DB.
Can someone please help how I should properly do this step by step to give all domain users permissions to view a report in SSRS?
Thanks much! - Rookie DBA

Hi IWAR,
The error message "Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'" means the user 'USER LOGON' does not have permissions to access the "ReportServer" database.
To fix this issue, please verify that the user has a valid database user login. For more details, please refer to the following steps.
In SQL Server Management Studio, open Object Explorer and expand the Databases folder.
Expand the database in which to create the new database user.
Right-click the Security folder, point to New, and then click User.
On the General page, enter a name for the new user in the User name box.
In the Login name box, enter the name of a SQL Server login to map to the database user.
Click OK.
Reference:
http://technet.microsoft.com/en-us/library/ms156468(v=sql.105).aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Deploy CR 10 from VS 2005 C# fails to login on 2nd try

Hi,
I'm new to CR and .NET in general, but I've got a working app on my development m/c. I built a setup project in .NET and deployed the app to our test lab.
From there I was able to generate a report on my first request, but when I returned to the dialog that I use to collect parms and select the report I need I fail to login the CR (Oracle).
To be clear, my app builds 4 different reports, from my m/c I ran successful display as many copies of those reports as I have tried. But, on the test lab m/c I can request any (1)one of the 4 reports, but as soon as I request a 2nd one the app fails with the Login failed message.
I've already included the CrystalReportsRedist2005_x85.msm merge module.
Anyone have any ideas about how to solve this problems
thanks.
Danny
For anyone dealing with connection problems and may be interested in how I've resolved my connection problems:
It turns out that the problem wasn't in CR10 or the setup project. It was with the ODBC connection to Oracle9i. My m/c has a later version of Oracle9i then the version on the m/c in the test lab (9.2.0.5.0 vs 9.2.01.0)
The the temp fix is to revise the SQLNET.ORA file. Eventually we will need to install Oracle patches to correct for the ORA-12154 TNS could not be resolved error. This is going to be necessary for all client m/c's before going live.
Good luck to anyone dealing with similar issues.
Danny

Hi!
I am having the same issue in Oracle Weblogic Server 10.3.0.
I resolved it by increasing the memory in the setDomainEnv.sh
MEM_ARGS="-Xms1G -Xmx1G"
export MEM_ARGS
MEM_PERM_SIZE="-XX:PermSize=384m"
export MEM_PERM_SIZE
MEM_MAX_PERM_SIZE="-XX:MaxPermSize=384m"
export MEM_MAX_PERM_SIZE
Anyway I don't know why this resolved it and why the exception is not a memory error. I have tested version 10.3.2 and it doesn't report this errors with the same memory assigned.

The User Profile Service service failed to Login user Profile error in Windows 7 Home Premium

Hi,
I recently purchased a new Dell Inspirion 1564 Laptop which had Microsoft Windows 7 Home Premium 64-bit installed.
The hardware configuration is i5 core Processor, 4GB Ram , 320GB HDD and 512MB Graphics card.
Today morning, I couldn't login as the system returned the following error after I entered the password.
"The User Profile Service service failed to login.
User Profile cannot be loaded"
I couldn't login at all as i had not created any other user account, even the face recognition didn't work.
I had to restore my pc to the previous state. I believe this happened after the installation of Windows Malicious Software Removal Tool x64 - March 2010 (KB890830) update, not immeditately though as i used the system few times after the installation of this update.
Is this a bug? I cant imagine if this happens if I am about to give a presentation, its going to be disastrous!
Any help is appreciated
Avinash

I'm getting the same issue - I'm the IT Manager at a school where every student has a laptop (fujitsu tablet T4410). This occurs to at least one new student every day. I have been unable to re-create the issue on demand, although I suspect it occurs when a temporary user profile gets created after the logon process takes too long (due to some disk activity, possibly related to windows updates or some thing). When we were creating student accounts on the machines, this would occur if we attempted to log in the newly created account before the computer had 'settled down' - it seems that there is a logon timeout, after which something stops working. If the new user's first logon happened too soon after booting, the profile would be corrupted. But this doesn't quite explain why it occurs seemingly randomly now.
My current solution is to boot into safe mode, back up the user's files, delete the account, create it again (the other suggested solutions on the internet did not work)
If you're desperate, you can log in while in safe mode, and use that to create a new account.
In any case, this is proving a very bad experience of Windows 7 for my students, and I hope to see a more useful fix for this soon.

Failed to login B1i server

Hello,
I installed B1 integration components successfully and enabled Cockpit in SAP B1. The Dashboards working fine on server and clients. But sometimes (not always) I get the error below when login SAP B1:
Cannot connect to SAP Business One Integration Service. In the Microsoft Services window, make sure this service is running.
and dashboards don't work.
it seems that it is due to timeout. I get the error below in logs file:
2015-03-20 14:17:55,521 [1] ERROR SAP.BusinessOne.WebBridge.B1iConnector - Failed to login B1i server; Response detail: {
"Status": 0,
"Headers": null,
"Cookies": null,
"Body": "The operation has timed out"
When the dashboards work I get the info. below in the same logs file:
2015-03-24 12:06:18,293 [1] INFO SAP.BusinessOne.WebBridge.ConnectorBase - set cookie: url=HTTPS://<server_name>:8443/B1iXcellerator/exec/ipo/vP.001sap0004.in_HCSX/com.sap.b1i.vplatform.runtime/INB_HT_CALL_SYNC_XPT/INB_HT_CALL_SYNC_XPT.ipo/proc, key=JSESSIONID, value=B5E9544EEFDF8B38E5036C2D941F9F17, domain=<server_name>, path=/B1iXcellerator
Is there a way to overcome this issue ?
Can I increase the timeout period ?
My SAP B1 version is 9.1 PL05 (MS SQL Server 2012).
Regards
~Nidal

hi,
try to following pdf and check your integration configuration.http://www.vision33.com/media/165196/v33%20how%20to%20b1if%20-%20installation%20documentation.pdf
thanks & regards,
Harshit

System.Data.SqlClient.SqlException: Cannot open database "MSCRM_CONFIG" requested by the login. The login failed. Login failed for user 'NT AUTHORITY\SYSTEM

Dear ALL
After successfully shifting the CRM from 2011 to 2013 i found a problem in Reporting section none of the report is working after some finding i conclude that MSCRM_FetchDataSource is not able to connect successfully
Through my report manager i tried to test the connection of MSCRM_FetchDataSource but i got the following error
System.Data.SqlClient.SqlException: Cannot open database "MSCRM_CONFIG" requested by the login. The login failed. Login failed for
user 'NT AUTHORITY\SYSTEM'.
I already add the NT Authority \ System as a db_owner under my database user of MSCRM_CONFIG
But still no success any one have any idea why it's happaning
Regards
RB

I found a solution I hope my post will help other
I gave the db_owner to 'NT AUTHORITY\SYSTEM' and 'NT AUTHORITY\NETWORK' and assigned with both CRM and Config database
It resolved my issue
RB

New notebook~ "Fails to login"

We received our new Acer Notebook on Friday. We had no problems setting it up and getting online. It worked up until yesterday afternoon. When we try you login we get the following message: "The User Profile service failed to login. User profile cannot be loaded." Not sure what we are suppose to do and the user manual is very brief. Any help would be greatly appreciated. Thanks.

I've seen this before on other computers. Reboot your computer, and Press F8 as soon as the BIOS screen goes away. Select Safe Mode and let it load. On the user select screen log into the Administrator profile. It should log into windows unless the administrator profile is corrupt. But after you log into the profile, click yes on the box that pops up talking about system recovery. It will take you into the desktop from there. Go ahead and close the Help and support window that pops up.
From the desktop go into the start menu and select the control panel then into user acounts. select the account name you are having a problem with and delete it. After that, click on create new account. Once complete reboot the machine and try to log in normally.
Let us know if this helps.

Slim fails to login...how to get command line back?

Man, what a drag. I (seemingly) successfully installed Arch with xfce, which is a huge accomplishment for a guy coming from years of Ubuntu, and avoiding command line and config files every chance he gets.
Anyway, I'm using slim as a display manager, and it fails to login (I am choosing the xfce session). I can't seem to get to a command line so that I can try a different display manager. Google says that Ctrl-Alt-F1 should do the trick, but that just gives me a black screen and sits there. Any help?
Thanks.

Pacopag wrote:I'm not sure how to even edit the grub file.
Like this http://www.cyberciti.biz/faq/grub-boot- … user-mode/
Does Alt-Ctrl-F2 work?
Last edited by karol (2011-05-29 03:39:49)

Failed user login attempts

hi can u say in which failed user login attempts will be stored.

Hi,
Configure the SAP audit system with TC SM19.
Then use TC SM20 to see failed logins (and much more)
cheers
Jan

Failed to login

Hi Foks
i have strange issue,i m connected to my acs using browser for mangment purpose , i m entering the correct username and password but i receive failed to login,why is that?how to fix this issue

Hi,
For testing purpose, you can try login with the Admin username and password you created on the ACS.
Hope this helps..
Regards,
Anisha
P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.

Failed to login console

Hello,
It's failed to login console with ACSAdmin account. The ACSAdmin is able to login in GUI.
No idea about the reason. Anything configuration is not correct in my ACS 5.2?
Thanks,
-Alejin

Hello Alejin,
there are two types of admin users for ACS. One for the appliance and one for the application (GUI). and there idependent of each other.
if you lost the appliance admin password, you might try this.
http://www.cisco.com/en/US/products/sw/secursw/ps5338/products_installation_guide_chapter09186a0080203004.html#wp1038722
regards
alex

Failed file login for admin

In the app server log file, this keeps coming up. When I went to run my app in creator2, it prompted me the first time for the admin username and password, which I used the admin adminadmin values. The web app came up in a browser window and seems to be working fine... but the log file keeps getting this message
Failed file login for admin
Failed file login for admin
Failed file login for admin
Question, what is causing this and how can I stop it?
Question, how can I change the admin username and password?
Thanks in advance
Dean-O

You can try reseting the appserver.
You can find a "utility/script/commandfile" in
C:\Program Files\Sun\Creator2_1\bin
C:\Program\Sun\Creator2_1\bin
pe-start.bat -reset (there is a tiny dot in the filename here) for windows
pe-start.sh -reset (there is a tiny dot in the filename here) for linux/unix
!!!! If you have made any changes to the configuration files, make sure you make copies of the files, they will be lost. !!!!
so that you can pull out the information from the old files, that probably has been corrupted and put them back in the new files.
It might be that you have made incorrect changes in the config files or they have become corrupted.
Kind Regards
Roger

Main account fails to login

I am using a G4 iBook running OS X 10.4.10. I have already run repair permissions and the automated maintenance of Onyx.
The main account I use, which is not an admin account, fails to login. My wife's account and the admin account both still works. What happens is that I select the account and type in the password. When I hit enter the password is highlighted and the "log in" and "back" buttons become disabled. However, the loading bar does not appear at all and no logging in happens. I have noticed that I can still re-enter the password but the buttons are still disabled. I have the restart the computer to get back to the login screen.
This problem began immediately after the computer suddenly turned off while I was browsing the iTunes store.
Message was edited by: Robert Monroe

Two things to try, Robert. Go to System Preferences > Accounts and see if there is anything strange in your Login Items.
Then boot from your Mac OS X install DVD and go to Disk Utility and run repair disk. You've already correctly run repair permissions (you do this while booted from your internal HD). But you have to boot from your install DVD to run repair disk. Somethin in your Mac's directory might have been disturbed when the computer suddenly turned off while you were using it. Repair disk is capable of fixing some of these problems.
Regards,
Steve M.

Linux-3.9.2-1: failed to login with Gnome 3.8

Hi all,
Today morning i was unable to login into gnome 3.8: gdm worked fine, but after confirming password i saw "Something has gone wrong...".
After downgrading recent updates i found that the issue is in new linux-3.9.2-1. So linux-3.8.11.1 works fine and this is the only package that affect this bug.
I dumped output of 'journal' command in both cases and compared them and found a few lines that may affect on the bug:
linux 3.9.2-1 (not working case):
May 13 10:49:03 green /etc/gdm/Xsession[500]: **
May 13 10:49:03 green /etc/gdm/Xsession[500]: Bluetooth:ERROR:rfkill-glib.c:83:type_to_string: code should not be reached
May 13 10:49:03 green goa[633]: goa-daemon version 3.8.1 starting [main.c:113, main()]
May 13 10:49:03 green /etc/gdm/Xsession[500]: (gnome-settings-daemon:536): power-plugin-WARNING **: Failed to run GetActive() function on screensaver: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.ScreenSaver was not provided by any .service files
May 13 10:49:03 green /etc/gdm/Xsession[500]: gnome-session[500]: WARNING: Application 'gnome-shell.desktop' killed by signal 6
I'm not sure if this really prevents gnome-shell from loading. My laptop has sandy bridge cpu, intel drivers ("sna" is on).
In any case downgrading linux kernel worked for me and maybe will be useful for other people.
local/gnome-session 3.8.1-2 (gnome)
local/gnome-settings-daemon 3.8.1-1 (gnome)
local/gnome-shell 3.8.1-1 (gnome)

@404error: thank you! With that help Gnome is now back up and running with kernel 3.9 ...
I followed the rfkill-glib.c diff given here, which finally did the trick.
However, the network indicator LED on my HP Elitebook 6930p keeps flashing (blue/red) whenever I'm logged in. That's a little annoying, but a working Gnome certainly makes up for it.

How can I recover from Windows login failure: User Profile Service failed the login

I have Boot Camp installed on a separate partition on a MacBook Pro, late 2011 model. I have Mavericks installedd (10.9.1). I use, variously, both Parallels and VM Fusion to access the BootCamp installation of Windows 7.
Except for having recently installed updates of both VMFusion and Parallels, I got this failure message when trying to login to Windows:: The User Profile Service failed the logon. User profile cannot be loaded.
I had just been on Windows a few moments previously to access a business site that only accepts IE. Appreciate any useful insight on dealing with this issue without having to totally replace the BootCamp installation. A lot of the suggestions on Microsoft Windows repair sites are either incomprehensible or don't seem applicable.

Same problem here. Windows 7 support gives several so-called fixes (including regedit tweaks, eliminating the blocked user account), but all require access to that partition. So far as I know, I have only one user, since this is my personal computer -- unless there is some sort of default "administrator" logon.
Windows support says the problem might be caused by antivirus software running while we try to logon, but this problem has never happened to me before, and I have not made anti-virus changes (maybe AVG or Avast did so automatically)
I tried to access regedit through Finder, but get a garbled text-edit with the message that regedit cannot be opened by DOS.
So I wonder (a) is there a default admin logon? (b) Can we tinker with the settings inside Windows from Finder, or (c) how else can we get into Windows?
My setup: Macbook Pro (Fall 2010), 10.6.8, boot camp, Windows 7.

Failing to login

Similar Messages

Maybe you are looking for