Failing to print letters in Recruitment
Can anyone help me on how to solve the following problem written in capital letters-INTERNAL ERROR IN SAP OLE DOCUMENT CONTAINER CONTROL. i am not able to print or display applicant letters in Recruitment
Hello,
If you are still on versions 4.6b or 4.6c then you might need to look at SAP Note 427615 and its pre-requisite 402195. Implement these notes and check.
You could also check Notes 528216 and 1244863 if you are on higher versions or the above did not solve the problem.
Regards,
Similar Messages
-
Adobe Acrobat Pro failed to print pdf file
I downloaded adobe acrobat pro and started the 30 trial version just a few minutes ago.
I could open files through adobe acrobat and convert word files to pdf, but when i tried converting a publisher file it could not go through. An error popped up which read "Adobe PDF printer failed to print pdf file".
The publisher file I am hoping to convert to pdf is a 21 page panorama article. It contains lots of images and a variety of font types.
I do not know other alternatives for solving this issue.
Your help will be very much appreciated.
Thank you!
ErikIt seems to be that Adobe Acrobat virtual printer is not properly installed on your PC or you are not selecting Adobe PDF printer to print PDF document. Checkout the below screen shot to see proper printer.
After trying this if you have same problem you may trt some other virtual printer that easily convert or print any file as PDF, you may checkout here. -
HP Laserjet 6MP fails to print with parallel-to-USB converter cable
I have a LaserJet 6 MP parallel printer which I was using in 10.3.9 with a parallel-to-USB converter cable. The Printer Utility saw it natively as a USB device and it printed just fine most of the time, although it would occasionally fail to print, so I installed a different driver called usbtb 1.0.15, and after that it printed very reliably.
Now I've upgraded to 10.4.9, and the Printer Utility still detects the HP printer natively as a USB device, and I also installed the formerly-reliable usbtb driver again, but the printer now fails to print with either driver. It acts like it's going to, but then it quits.
When I choose Print, all the features of the printer are shown, and I can select which tray to take paper from etc., and the printer dialogue box says "Printing," the activity light on the printer flashes just as it always does when printing is in progress, but then, instead of printing, the activity light stops flashing and the print job disappears from the dialogue box.
Can anyone tell my why this printer is failing to print now, and how I might be able to get it working again?
Thanks,
TomWait a minute! It's only certain Indesign documents that won't print.
All TextEdit docs will print.
I created a few scribbles in Photoshop and they print.
But with InDesign, there is no predicting which documents will print or will not print. On some that will not print, if I remove all but one text box, then they will print. On other documents that do print, if I copy some text off of one that won't print and paste it in, then that one stops printing too.
On some that won't print, if I erase everything on the page and create a new text box and type a few words into it, the page will print. If I revert to the previously saved version, once again the page won't print.
What kind of craziness is this, anyway? It seems random. I can't figure it out.
Even on the documents that won't print, when I try to print them the printer's activity light blinks as though it is just about to print, but then the light goes out without printing.
Anybody got any ideas what this problem is and how to fix it?
All I know is that EVERYTHING printed before I upgraded from 10.3.9 to 10.4.9.
Tom -
HP Color LaserJet 1515n fails to print
HP Color LaserJet 1515n fails to print
I had this printer just 13 months, and it has stopped working without giving any kind of error code.
I ran my black down to 1% using override - and then nothing. The printer accepts jobs and appears to do everything up to the point when it should start feeding paper through the printer transport.
I changed the black toner, but it made no difference.
To avoid complex print driver problems I have been using a simple txt file with 'hello world' for testing.
Having reinstalled the drivers.
I have done a very extensive web search, I cannot find any appropriate help.
I took the side off the machine to reveal the electronics, and tested all the connections etc, but cannot find anything obviously wrong.
The transport mechanism seems ok, because the manual feed slot accepts paper and pulls it in, but then goes no further, ie to actually start printing.
The calibration process seems ok, and all the 4 color cartridges seem ok, and the spindles on them obviously turn having marked them to see if any were stuck.
As there is no error code in the log file, I cannot see what is wrong.
Does anybody have any idea what is wrong? Are there and tools that can be used to interrogate the printer further?Wait a minute! It's only certain Indesign documents that won't print.
All TextEdit docs will print.
I created a few scribbles in Photoshop and they print.
But with InDesign, there is no predicting which documents will print or will not print. On some that will not print, if I remove all but one text box, then they will print. On other documents that do print, if I copy some text off of one that won't print and paste it in, then that one stops printing too.
On some that won't print, if I erase everything on the page and create a new text box and type a few words into it, the page will print. If I revert to the previously saved version, once again the page won't print.
What kind of craziness is this, anyway? It seems random. I can't figure it out.
Even on the documents that won't print, when I try to print them the printer's activity light blinks as though it is just about to print, but then the light goes out without printing.
Anybody got any ideas what this problem is and how to fix it?
All I know is that EVERYTHING printed before I upgraded from 10.3.9 to 10.4.9.
Tom -
Why should Adobe Reader fail to print because of settings in the Edit/Preferences?
AdobeReaderDocumentCouldNotPrint.txt
Glyn Price Tue 17 March 2015
Why should Adobe Reader fail to print because of settings
in the Edit/Preference?
Adobe Reader XI Version 11.0.10
MS Window 7
File > Print > Print
I got the error message:
The document could not be printed
I googled this error message and used the following
solution that worked i.e. it then printed successfully.
Edit > Preferences
Category: Security(Enhancement) 'Enable Protected Mode at Startup'
It was checked, changed it to unchecked.
Category: Documents 'View documents in PDF/Mode'
It was set to 'Only for PDF/A'
Set it to 'Never'
Exited Adobe Reader and restart it. Then it printed.
I had a look on another computer system (Adobe Reader XI Version 11.0.10
and MS Window 7) and on this different computer I could print
without doing the above two changes.
I'm a bit puzzled. Why preferences on one system were not
needed on a different system?Here is an elaborate method of troubleshooting this problem. There may be a simpler method if anybody wants to suggest one.
There is a general technique that is helpful in this situation. I can't give you complete instructions here, and I haven't tested this with regard to bluetooth devices, but here's the gist of it.
Create a second log-on account for your music projects. Configure it so that when you log in to the new music account, the drivers needed for the Bluetooth devices don't load. You do this in System Preferences: Accounts.
When it's time to do music, log out of your usual account and onto the new one.
When you install drivers for any peripheral, you have the option of installing them "for all users" or only for the user account that is active during the installation.
This governs whether the drivers go in root/library or root/Users/your name/library.
If drivers are in root/library, they will load whenever the Mac is booted up and will run for all users.
But if drivers are loaded in root/Users/your name/library, they will only load if you log in as "your name". If you have a second account called root/Users/music account/, and you log in under that, the drivers in "your name" will not load. Get it?
To get this working right you need to be knowledgeable about moving or deleting files in the /library/ directory and subdirectories, and you need to be careful because you can unwittingly cause some damage if you are not careful.
There is also the root/System/library directory, and in general you should never mess around with anything in there or you might hose your system.
In summary, I would start by using the installer programs for your BlueTooth devices and DE-installing all drivers. Reboot. Log back in as your usual user account. Then RE-install each driver and see if the installer program gives you the OPTION to installl for all users or just for this user. Choose the latter. Then log on to your new Music account and see if the problems go away. -
Acrobat 7.0 printing letters not there
I have Adobe Acrobat 7.1.0 running on Mac OSX (10.6.3). I downloaded a form which I turned into a printable form, saved it and filled it in. However, when I go to print it, it prints letters not there. It will change letter like the letter "P" and make it an "R". Oh yea, these are letters that are part of the form, not what i added or typed in.
This problem has never happened before and I use Acrobat 7.0 all the time.......... OK I know I have to upgrade and I am going to, but my understanding is there are issues with Acrobat 9.0 and Mac X.
Help.............No I can't post an example since it's PHI.
But I did what you said. The .pdf that works fine has nothing listed in the fonts page. The one that doesn’t work has a lot of fonts.
On the Description page, the differences are:
Application (bad): IDRS KDK - Plus
Application (good): Xerox WorkCenter 7655
PDF Producer (bad): Image Recognition Integrated Systems S.A.
PDF Producer (good): Xerox WorkCenter 7655
So it's obviously trying to do some character recognition which I don't want.
So is my client (who sent these to me) sending from different scanners that are set up differently? Or is she sending from the same scanner ... with the settings occasionally set differently for some reason.
I'd like to be a little educated before I talk to her.
Thanks for your help -
Some text in PDF fails to print -- document originally created with InDesign
Hello. Thanks in advance for your help.
I joined Creative Cloud a few days ago, and dowloaded several CS6 programs -- InDesign, Illustrator, Photoshop and Acrobat XI Pro. My operating system is Windows 7.
I created a simple order form using InDesign, and it prints perfectly directly from the InDesign platform. After creating a PDF by selecting Adobe PDF as the printer, the resulting PDF looks perfect on screen when viewed in Acrobat XI Pro. However, when printing from Acrobat to a paper-and-ink printer, chunks of the text go missing. Two other people who were emailed the PDF of this document have experienced the same problem, with the same chunks of text failing to print.
Since it prints perfectly from InDesign, I am guessing the problem lies somewhere on the Acrobat side of the equation. Since the same problem has occured with several different printers, I am assuming it's not a problem with my particular printer.
I have already tried unchecking the "Rely on system fonts only; do not use document fonts" option in the Adobe PDF printing preferences, and that did not fix it. I didn't expect that was the problem, since the rest of the type prints perfectly.
I would like to attach two PDFs and/or the original InDesign document, but I cannot find an attachment option on the interface for this discussion page. I would be happy to email them to anyone who would like to take a look at them.
As usual, I am working on a deadline and would very much appreciate any help you can give me.
Thank you!YES! A SOLUTION!
Thanks to an Adobe user who goes by "Test Screen Name" for this solution!
DO NOT print to PDF from InDesign to create a PDF. Instead, use the Export function.
I followed that advice, and it solved the problem. Hope this helps you, JuleeBruce! -
My Acrobat 8 Pro is failing to print to a pdf from multiple software. I get an error message that a repair fixes but only for a little while. Pretty soon the trial version of 9 that I installed pops up telling me it has expired but it would take me to a way to buy a valid serial number and then 8 stops working again. I’d be happy if the 8 I paid for worked right or I could get 9 for a small cost but I cannot afford $450 or $20/month. I need a permanent solution that I should be already paid for with 8 pro.
After multiple repair procedures with reboot in AA8 I was eventually able to restore the printing to pdf function from various software. However I have again lost my Acrobat tab in Outlook 2007. I need that back, but today an even bigger problem arose. AA8 has stopped printing to fax. It faxes a blank page. The only fax printing option is “Microsoft Shared Fax Driver”. My fax software is “Windows Fax and Scan” and it was working fine just a couple weeks ago. My OS is Windows 7 Professional.
I have tried doing the updates you referred to but I get error messages like these:
“No qualifying products found to apply this update, or update has been already applied”
or
“The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing , or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.” -
Adobe Reader 9.1 fails to print to Sharp AR-BC320
Dear Adobe Support:
The current version of Adobe Reader 9.1 for Macintosh fails to print to our Sharp AR-BC320 but your previous version 9.0 printed without any problem. I'd appreciate knowing how I can download a copy of the older 9.0 version so that I can install it after removing the 9.1 version.
This is a problem that we've encounter since Adobe Reader 7.1. The only versions of Adobe Reader that have worked reliably with the Sharp AR-BC320 were versions 7.0 (and below) plus version 9.0.
We're running the current version of the driver for this Sharp printer so any help that you can offer to resolve this problem would be appreciated!
Thanks!
Rick L.Dear Adobe Support:
The current version of Adobe Reader 9.1 for Macintosh fails to print to our Sharp AR-BC320 but your previous version 9.0 printed without any problem. I'd appreciate knowing how I can download a copy of the older 9.0 version so that I can install it after removing the 9.1 version.
This is a problem that we've encounter since Adobe Reader 7.1. The only versions of Adobe Reader that have worked reliably with the Sharp AR-BC320 were versions 7.0 (and below) plus version 9.0.
We're running the current version of the driver for this Sharp printer so any help that you can offer to resolve this problem would be appreciated!
Thanks!
Rick L. -
Font substitution failing when printing PDF to Non Postcript Printer
I have a problem with PDFs that do not have fonts properly embedded.
For example:
http://www.wlv.ac.uk/PDF/uow-direct-app-home.pdf
If I open the above file, it views on screen ok (using the substitute Adobe Serif MM and Adobe Sans MM) and prints to my postscript printer ok. But... if I print it to the basic office laserjet (Epson c1900), it fails to print any of the type.
Any ideas?No worries - thought you were from Wolverhampton University - know some
people there ;-)
You might want to ensure all your print drivers are up-to-date since
this can seriously affect output - especially with Acrobat 8 printing
issue. Don't forget to update to 8.1.2 through the 'Check for Updates'
option under HELP.
Another idea might be to use the PRINT AS IMAGE option under the print
menu, this will spool an image file to the printing device which might
also help ...
Jon -
PS CS5 Fails to Print New Document
Folks,
I recently installed CS5 on a new Windows 7 64-bit computer. I subsequenly downloaded/installed the latest driver from Epson for my R340 printer.
I opened a .jpg in PhotoShop and printed it with no difficulty, as did an existing .psd file created with CS2. Same with existing .tif files.
However, when I created a new document, it failed to print as follows:
The PRINT option is available in the FILE pull-down menu. However, clicking it or pressing CTRL+P has no effect. No print dialog box appears. No file appears in the printer queue, and the PRINT option in the pull-down menu becomes unavailable (grayed back). Even if I close the document and PhotoShop, then restart the program in open the (now previously-exiting0 file, it stil won't print.
I thought the problem might be caused by the fact that the R340 was not designated in Windows as the default printer. But making the R340 the default printer did nothing to alter the situation.
Anybody know what the magic word might be?
Grrrr!
ThanksUse the forum for PS.
-
I am helping a disabled person with a printing problem involving a Macbook, an Epson SX218, and MS Office for Macs. The Macbook had been recently updated to OS X 10.6.8, and the printer driver reinstalled, by an Apple store. She complained the printer failed to print about every fifth line. It turned out there was no problem at all with printing web pages and emails, but only with Office (Word, Excel, Powerpoint). I updated
Office. Later all lines were printed, but imperfectly with a bit missing from bottom of every fifth line, as though the printer had missed out a pass, so I am not sure the Office update is what made the difference. I am not at all sure whether this problem arises from the Mac or the printer or Office.It looks like that the installation process of one of the applications have caused some trouble. One of them may have changed or added kext files.
For that, the Window server crashed if you try to open a non Apple application like Firefox
Start the system in safe mode by holding the shift key on power on.
If save mode is reached, perform a permissions repair with the Disk Utility.
Don't bother about upcoming warnings like "could not repair file xy" as that occur cause you use the tool on a running system and opened files can not get touched by the tool.
After repair is done reboot system to normal and try to open Firefox.
If the problem persits, please report back here.
Lupunus -
HP PSC 1410-v All-In-One - Doc. failed to print
My HP All-In-One 1410-v printer works fine most of the time. However, it used to print my paycheck stub from Intuit's Payroll Website. Suddenly it refused to print that information. it will print the first three lines and then I receive an error message on my computer in a pop-up box that says:
The Document failed to print
Document Neme: FLASH
Printer Na: HP PSC 1400 Series
Time Sent: (the current time)
I have talked to Intuit.
My printer prints everything else fine.
I tried downloading the information to Adobe (an option available from the site) and then printing it from Adobe; I receive the same message.
I had an unrelated computer problem and my hard drive was wiped clean. I reinstalled printer from CD. Still will not print this document.
I downloaded the check utility and the check indicates I have the most up-to-date driver.
I don't know what else to try. Anyone have (and solve) this problem? Ideas? Suggestions?
ThanksMy previous post corrected:
This works successfully (OpenPrinting/MacOSX/hpijs) BUT when I originally installed it, it would only print in colour i.e. it only used the colour cartridge to print, even to print black/white or greyscale. I solved the problem - I thought - using the advice from http://tech.ifelix.net/1300.html even if my printer was on the "compatibility list".
However, I recently installed the latest version of the OpenPrinting software http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs#Printers to find that I have reverted to the colour cartridge only use! I don't seem to be able to resolve the problem this time around. Can anyone help? -
When printing web based .pdf or regular .pdf I get message "This document failed to print"
When printing web based .pdf or regular .pdf I get message "This document failed to print". I've ran the HP Diagonistic tool and no errors are found. I've gotten the same message on many different .pdf's so I don't believe it is a margin issue.
Are the static IP addresses inside the DHCP range? If so, move them to ones outside the range.
Also, have you set the IP address in the printers' embedded web pages (via IP address in a browser) to match the ones set in the router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Printable Intermittently Failing to Print Completely
I have an application that uses the Printable interface to print 2 or 3 PrinterJobs upon an ActionEvent. The PrinterJobs are printed on 2 different networked printers--1 PrinterJob to one networked printer and 1 or 2 PrinterJobs to a different networked printer. The application is running on Windows XP and the printers are spooled with the standard Windows spooler. The JRE is 1.5.
The ActionListener (in outline) looks like this:
pjob1 = PrinterJob.getPrinterJob();
pjob1.setPrintService(printServiceA);
pjob1.setPrintable(printableOne);
pjob1.print();
pjob2 = PrinterJob.getPrinterJob();
pjob2.setPrintService(printServiceB);
pjob2.setPrintable(printableOne);
pjob2.print();
if (condition)
{ pjob3 = PrinterJob.getPrinterJob();
pjob3.setPrintService(printServiceB);
pjob3.setPrintable(printableTwo);
pjob3.print();
}So pjob1 and pjob2 use the same Printable on different printers and pjob3 uses a different Printable on the same printer as pjob2. pjob1, pjob2, and pjob3 are class variables of the main class and the ActionListener is a method of the main class.
My problem is that intermittently, the second PrinterJob (pjob2) fails to print everything that it should. I know that the problem is not with the printers because I've set the spooler to save the spooled jobs and the spooled output is incomplete. The amount of non-printed data varies but it always appears to begin printing and then stop at some point in the order in which the print() method prints it. This leads me to believe that there is some sort of race condition.
Has anyone seen anything like this or have any suggestions as to how to track this down?
Thanks.Hi Doc,
Based on your description, I understand that you want to set DC as printer server. However, it seems that you
worry about it. On current situation, please refer to following thread, then check if can help you.
Print
server On a Domain Controller
Meanwhile, please also refer to following articles.
Print and Document Services Overview
What's New in Print and Document Services
in Windows Server
à
We still have the same printer issue since deployment.
By the way, I noticed that a same printer issue occurred in the old print server and new print server. Would
you please let me know more details of it? Any error message or relevant event?
If anything I misunderstand, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu
Maybe you are looking for
-
Problems with the Calendar App in iPhone 4S
I'm having a problem the Calendar app with an iPhone 4S (iOS 6.1.3). I added a Google account with the company's domain (Microsoft Exchange option), but the calendar it's not available on the Calendar App list. I already tried to delete / restart / c
-
Cannot install 8.1.7 Linux Oracle
Hi, I downloaded the 8.1.7 Oracle linux version from ORacle.com. But when i tried to install it it does not work. I created the oracle and apache users. I de-tared the file on the hard disk. - I can launch X11 apps from the user oracle (so it's not a
-
Cant get windows laptop to connect with imac
it says that the laptop is connected to my imac already but i cant seem to surf the internet with my laptop at all. some help please. or is there any information thats required so that help can be provided ?
-
Can i use the trial version of Photoshop CS6 with Windows XP - if so, where can i download it?
Can i use the trial version of Photoshop CS6 with Windows XP - if so, where can i download it?
-
Having trouble putting a downloaded mixtape onto my iTunes library.
Having trouble putting a downloaded mixtape onto my iTunes library.Any suggestions?