Failing to register files??

I have been using iTunes with no problems for a while now but today it wouldn't open up. Said that I was missing files which to me sounds rather trojan/virus. But when I try to reinstall/repair it I am told that "Module C:\Program Files\iTunes\iTunesMiniPlayer.dll failed to register. HRESULT 2147023782. Contact your support personel." So that's what I'm doing. Help?

I had the same problem. May I ask if you use AVG, there are other posts regarding trojans etc, again my AVG decided I had them. However if you allow a certain path to be "missed" by AVG then it should solve your problems. If youre like me and uninstalled itunes, then you wouldnt have the directory so you would need to uninstall AVG, install itunes, then reinstall AVG and allow the forementioned directory. Hope that helps

Similar Messages

How do I fix this error: Module C:\Program Files\Bonjour\mdnsNSP.dll failed to register. HRESULT -2147024769. Contact your support personnel.

I am trying to install iTunes, and get this error: "Module C:\Program Files\Bonjour\mdnsNSP.dll failed to register. HRESULT -2147024769. Contact your support personnel."
Any ideas on how to fix this error, or get the install to comlete?

*complete...

Error 1904.module failed to register \importent.dll files HRESULT -10737407

Hi,
I'm trying to install BOE on the E drive, but i'm getting this error "error 1904.module failed to register C:
Program Files(X86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\importent6.dll files HRESULT -1073740791".
1.My question is eventhough i'm installin on E, by default i think its trying to load some folders/files on C drive. Is this error because of some permission/rights on C drive??
2. What does this error mean?? Can we ignore this error- will it have some problems in future??
Could someone please help me on this....
Thanks,
Rajini
Edited by: Rajini V on Nov 30, 2009 8:22 AM

Thanks Seb.
I have the administrator rights.
I have now cleaned up all the instances and registry entries for the same and started a fresh installation on E drive.
But the 'Importent6.dll' file is not getting registered.
I'm getting the error :
u201Cerror 1904.module failed to register E:
Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\importent6.dll files HRESULT -1073740791u201D
Why do we get this error?? How can I overcome this??
Regards,
Rajini

Getting "querypanel.dll failed to register" on Windows 7 32 bit machine

Trying to move from CR 2008 SP2 to CR 2008 SP3.
For the CR 2008 SP2 version of our application, which runs our Crystal .rpt files, we used Visual Studio 2005. we then created a Visual Studio .msi file, using the merge module (CRRuntime_12_2), to install this application on a target machine that had .NET Framework 2.0 and VC++ Redistributable 2005 SP1 installed. If these two latter prerequisites were not installed, our install would fail because the CEReportSource.dll could not be registered.
After installing CR SP3 on my development machine, we created a new Visual Studio project, again using Visual Studio 2005. I used CRRuntime_12_3 as the merge module and everything else was the same.
I was getting this same error message "CEReportSource.dll failed to register" when I attempt to install the SP3 version of the app on the very same machine on which I previously successfully installed the SP2 version. I found an answer in these forums to install Microsoft Visual C++ 2005 SP1 update. Even this did not help. When I installed MS VC++ 2008 Redistributable - x86 9.0.30729.17, finally the problem of "CEReportSource.dll failed to register" went away on XP and Vista machines.
Now I am trying to install my program on Windos 7 32 bit machine and I get "querypanel.dll failed to register".
Q1. By installing S VC++ 2008 Redistributable - x86 9.0.30729.17, the problem of "CEReportSource.dll failed to register" did not occur. Is this the right thing to do. I am not sure why VC++ 2005 SP1 did not fix the issue.
Q2.What do we need in order to prevent "querypanel.dll failed to register" error on Windows 7 32 bit machine.
Thanks for your time.

Moved to .NET SDK forum.
Search here, lots of info on distribution. Likely caused by MS updated the C++ runtime to include security updates. Go to MS's site and download the latest C++ distribution package with enhanced security.
If you use the CR MSI package rather than the Merge Modules it should work.
Thank you
Don
Edited by: Don Williams on Nov 9, 2010 2:16 PM

Importent6.dll fails to register on WTS (Citrix & Windows 2003 64bit)

Hi,
I am trying to install the BOE XI 3.1 client tools on a 64bit Windows 2003 R2 SP2 machine (used as Windows Terminal Server) and I get the message that importent6.dll and exportSDK.dll fail to register during the installation.
Did anyone of you out there had a similar problem so far? Due to the error I cannot get the import wizard installed.
Additionally it would be interesting to know if it is possible to use the import wizard XI 3.1 as a terminal server application in a WTS (64bit) environment.
Regards,
Stratos

Hi,
with regards to the "(x86)" folder i would not recommend installing the BOE Client Tools into that folder. Please create a own Folder (you can for sure do this on drive D:) and install it into the folder. You could create a "Program Files" folder instead of installing it into the "Program Files (x86)" Folder.
About the Errormessage of your .dll`s please check SAP Note - 1205687
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3132303536383726
About Windows7. Windows7 is only supported since SP3. Please use the SP3 Fill Build setup routine for the BOE Clients for installing on Windows7.
Regards
-Seb.

Need help iNSTALLING cr2008..GET "FAILED TO REGISTER" ERRORS

I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctly

I would suggest making sure your machine is clean. Contact support for the steps to fully uninstall CR. For example, here are notes to uninstall previous versions of CR:
1218535 - How to manually uninstall Crystal Reports XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333533333335%7D.do
1216945 - How to manually uninstall Crystal Reports 10
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313336333933343335%7D.do
1216947 - How to manually uninstall Crystal Reports 9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313336333933343337%7D.do

Flash Player failed to register

I cannot update Flash Player, I have removed Flash Player and cannot reload. It fails to register (tried multiple times). I am the administrator. Now what?

Download the following files by right clicking and selecting "Save target as"
Flash Player Uninstaller
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Save ALL files to your Downloads folder - DO NOT RUN anything yet.
Reboot your system.
BEFORE opening anything else, go to your Downloads folder and run the UNINSTALLER to remove all instances of Flash Player.
Next, run the ActiveX Installer.
Lastly, run the Installer for other browsers.
Once Flash Player is installed go to: http://www.adobe.com/shockwave/download/alternates/#sp
Download BOTH files, the one on the right FIRST by right clicking and selecting "Save target as"... the other by clicking and following the steps to dwonload the FULL ActiveX installer.
Once everything is installed, see:Enabling Flash Player in Internet Explorer and: ActiveX Filtering in Internet Explorer to make 100% sure that Flash Player is enabled and NOT being blocked by ActiveX controls.

Flash Player 10--failed to register

I have been trying to download and install Adobe Flash Player 10, but cannot make it happen. I have tried with both IE7 & IE8. I have tried installing from your site and also downloading the executable file. From your site I get the error, "Failed to register". If I use the downloaded executable file, Install_Flash_Player_10_ActiveX.zip, the error I get is "Failed to Install." I have read many of the forum threads on this and, as suggested there, have tried going to the DOS command prompt and typing, "secedit...", but DOS says the command does not exist. What can I do?

the fastest solution is this:
Open register
go to:
HKEY_CLASSES_ROOT\TypeLib\{D27CDB6B-AE6D-11CF-96B8-444553540000}
select this number with a right click
select permissions and put a V on averybody and anonimous controll and read
than you can install flash 10 from the adobe site as usual
this works on windows 7 and XP

CR for VS2010 deployment - crtslv.dll failed to register

I'm still having problems with packaging up the CR for VS2010 library with our applications installation.
I'm using InstallShield 2011 for the installation setup.
I've included the CRRuntime_13_0.msm file. (That is the only MSM file I included, are the others needed also?)
I've included the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86 and the x64 versions.)
I have tried to do a test install on both a 64bit and a 32bit Windows 7 computer and it keeps giving me the crtslv.dll failed to register error on both computers.
Error 1904.Module C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crtslv.dll failed to register. HRESULT -2147010895. Contact your support personnel.
I thought it might just be due to the 32 bit MSM causing the problem on the 64bit computer, but I can't even get it to install on a 32bit computer. (On the 32bit computer install, I even removed the x64 bit version of the MS C++ 2005 Redistributable from the installation setup just to make sure it wasn't causing a problem).
I have even tried having my Install Shield setup 'Chain' the CRRuntime_32bit_13_0.msi file to my main installation (not using the Merge module). Even when that runs, it produces the same crtslv.dll failed to register again.
BUT, if I run the CRRuntime_32bit_13_0.msi manually on the computer it installs correctly. (I even tried using the same /qf parameters that InstallShield is using on it and it also worked OK that way.) So I can't figure out how to get it to run in conjunction with my InstallShield installation.
Can anyone give me any suggestions?
Mike...

I finally got past this issue and got things to install, with a few hackish work-arounds.
First the CR13 msm redistributable appears to requre the 32 bit version of "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security" that you'll read about in every post. On 64 bit machines I found that even when it was installed,I would still get a crtslv.dll failed to register message, followed several other dlls not registering. Once I installed the 32 bit version on the 64 bit OS, the crystal 13 redistibutable installed fine everytime. I did this on several 64 bit VMs all running Server 2003,XP, and Windows 7. It ran fine every time.
The problem you'll face is how do you install the 32 bit version of this ATL security pack on a 64 bit machine. You may be able to download and run the 32 bit version from Microsoft's site with the link Ludek has posted. That wouldn't work for me because I had to distribute it with my software so I used the prerequisite available for InstallShield. The prereq however is designed to only run on 32 bit machines, so I edited it in InstallShield and modifed the conditions to allow it to run on both 32 & 64 bit operating systems.
The next problem encountered is that this 32 bit prereq getting installed on a 64 bit machine will result in an error being returned that the installation appears to have failed. Well it is a 32 bit installation not intended for a 64 bit OS and we're not supposed to do that. I did say hackish work-around. The 32 & 64 bit files are installed to different directories and the 64 bit version does not get overwritten. If you check the event viewer you'll see a message logged in that the installation of the ATL prereq completed sucessfully. So I modified the behavior of the prereq in InstallShield to "continue the setup if the condition still indicates it is required after completion". Now it runs without error and everything for Crystal installs sucessfully.
The final problem was also with the pre-requisite. The code determines if it is already installed by looking for the file:
[WindowsFolder]\WinSxS\x86_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_473666fd\ATL80.dll
I found on some machines it was previousy installed to:
[WindowsFolder]\WinSxS\x86_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.4053_none_d1c738ec43578ea1\
This results in the prereq being required every time because the file it's checkig for is not found. Furthermore, it fails every time, most likely because it's alreday installed and not supposed to be installed again. So once again, I modified the prereq conditios in InstallShield and made it look for the file in both locations to determine if it was installed.
I haven't seen any problems since with either the Crystal runtime or the ATL update. Happy day.
The part I stll don't understand is that SAP says they can't distribute the ATL update in their MSM because of licensing issues, but we can sell our software and distribute it freely. Microsoft even create the prereq so that we could distribute it freely. So why can't SAP distribute the required files for their runtime? A lot of people on these threads have wasted a lot of time and money on this issue. Ludek provides great support but maybe this issue needs to be investigated further by development.

DTSAGENT.DLL failed to register when trying to install CRRuntime_32bit_13_0_7

Hello together,
maybe some can help me with an installing issue with CRRuntime_32bit_13_0_7.
When i try to run the setup i get the error:
Error 1904. Module C:\Program Files\SAP BusinessObjects\Crystal
Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dtsagent.dll failed to register.
HRESULT -1073741819. Contact your support personnel.
I found something following the link: http://scn.sap.com/thread/1948999 but it didn´t really fix my problem. I think it´s a problem with the constellation of McAfee that is also using the dtsagent.dll
I welcome each comment, feedback and each suggestion which could help me to fix this problem.
Thanks
Chris

Hi Chris,
This issue has been discussed many times before. Please use the top right corner search box.
I searched for "error, 1904, install, crystal, visual studio" keywords and here are the results.
http://search.sap.com/ui/scn#query=error%2C+1904%2C+install%2C+crystal%2C+visual+studio&startindex=1&filter=scm_a_site%28scm_v_Site11%29&filter=scm_a_modDate%28*%29&timeScope=all
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.

HP Solution Center error "flash9b.ocx failed to register"

I have a similar Flash9b.ocx faied to register problem that I have been trying to solve for several weeks.It started after I upgraded to the latest Flash Player 10.3.183.7 via the official Adobe website. After this upgrade on start up I got the following HP Solution Centre (printer software) error message:
C:\Windows:\system32\Macromed\Flash\Flash9b.ocx failed to register. HRESULT-2147220473. Contact your support personnel.
Further investigation confirmed that Flash Player had stopped working and where the image should be there was a blank black box. I tried reinstalling the latest version of Flash Player again but it made no difference. I was prompted to insert the original Solution Centre disk to solve the problem and although I tried this, it had no effect. I uninstalled Solution Centre including manually deleting any HP files that had been left behind and did a complete reinstall of the latest version including relevant patches from the HP website. This appears to have solved the problem as far as the Solution Centre error messages are concerned. However, on further investigation I found the Flash9b.ocx file mentioned above no longer exists but Flash Player still isn’t working.
I am running Vista (32bit) with all the current upgrades and Internet Explorer version 9.0.8112.16421 update version 9.0.2 (KB2559049)
Thanks for your help

After more than two weeks of trying, I finally found a solution to my HP Solution Centre Flash Player 10 conflict. Below is what worked for me and if you have a similar problem I hope this posting is of some use. uninstall Solution Centre & reinstall the latest version plus all the relevant patches from the HP website. Reset browser settings which in my case was IE 9 (Internet Options, Advanced tab, Reset) followed by a restart. Then uninstall Flash Player (Control Panel, Programs & Features, Uninstall) followed by another restart. Finally go to Adobe website and download the latest version of Flash Player.
Hope this helps

The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location

Could anyone please help in resolving the following
error:
Server Error in '/BizTalkXXXMyAppWcfService' Application.
The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc".
Please verify that the receive location exists.
It does exist: When I go to All Artifacts >> Receive Locations I can see: WcfService_BizTalkXXXMyAppWcfService/XXXMyApp
Also it is Enabled, green, up and running.
…and that the isolated adapter runs under an account that has access to the BizTalk databases. – Checked, the BizTalkUser has all the permissions to access BizTalk databases.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive
location exists, and that the isolated adapter runs under an account that has access to the BizTalk databases.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0xc0c01666): The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive location exists, and that the isolated
adapter runs under an account that has access to the BizTalk databases. ]
   Microsoft.BizTalk.TransportProxy.Interop.IBTTransportProxy.RegisterIsolatedReceiver(String url, IBTTransportConfig callback) +0
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +318
[AdapterException: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc"; receive location does not exist or is disabled.]
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +875
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +363
   System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1423
   System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
   System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1132
[ServiceActivationException: The service '/BizTalkXXXMyAppWcfService/XXXMyApp.svc' cannot be activated due to an exception during compilation. The exception message is: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc";
receive location does not exist or is disabled..]
   System.Runtime.AsyncResult.End(IAsyncResult result) +890624
   System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +180062
   System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107

Hi,
This seems to be a permission issue.
Makesure account used in the application pool is a member of the BizTalk Isolated Host Users group.
Also its working considering either make the ASPNET user account a member of your BizTalk Isolated Host Users group to make sure it has access to the biztalk databases (or change the asp.net services to run under a different account, which would need
to be done from the framework's core .config files)
Regards
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

Failed To Register error

I am running Windows Vista Home Premium (was using Adobe Flash Player 11 without any problems). I tried to install Adobe Flash Player 12 after uninstalling previous version and rebooting; however installation stops at about 50% then I receive an error Failed To Register ... I am the Administrator for this pc.
I attempted to install Adobe Flash Player 12 offline by saving the file (install_flash_player_ax) to my DOWNLOADS folder then ran the program with Internet Exployer closed. When I did this I got an error ACTIVEX FOR FLASH PLAYER could not register... What am I doing wrong?
Help Please.
Message was edited by: Grandmom
Message was edited by: Grandmom

Download the Adobe Flash Player installer directly by clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
SAVE the files (don't choose "Run")
Reboot and rtun them from your downloads folder.
You'll see no error.

Error 1904 - Module failed to register

I have been getting an error whenever I try to install Crystal Reports 2008 that says the following:
Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportConvTool.dll failed to register. HRESULT -2147024769. Contact your support personnel.
I have upgraded to the latest version of .NET 4 and turned off all antivirus software (as well as attempted other remedies suggested in other posts). However, I continue to get this error during installation regardless of if I run my installer off the CD we purchased or the latest download.
If possible, please reply with a solution or possible cause.
Thank you

Hi All,
I´m with a same problem.
I installed the CR 2008 SP1 in my notebook and when the installation begins register the module ReportConvTool.dll the intallation does not continue and not display error message.
Someone know what's going on ?
Tks.

Iwl3945 failed to register network device archlinux

Hi, i just install ArchLinux on laptop dell 1420 i follow the tutorials of the official documentations.
But i hace a small problem with the wireless. My laptop have an Intel 3945 wifi card so i install teh module iwl-3945-udev, i dont add this module in rc.conf file becouse this module in now part of the kernel... but i doesnt owrk.. so i check error log and i found this:
Feb 9 21:54:24 pichirilo iwl3945: Failed to register network device (error -12)
And the rc.conf is:
# /etc/rc.conf - Main Configuration for Arch Linux
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Canada/Pacific"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MOD_AUTOLOAD="yes"
MODULES=(tg3 mac80211 snd-mixer-oss snd-pcm-oss snd-hwdep iwl3945 snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
USELVM="no"
HOSTNAME="pichirilo"
eth0="dhcp"
INTERFACES=(eth0,wlan0)
ROUTES=(!gateway)
DAEMONS=(syslog-ng network netfs crond alsa hal fam kdm)
i try to add the module manually but i have the same result...
any idea ???
Thanks
Last edited by dilaang (2009-02-10 05:53:43)

No luck...removed iwl3495 from rc.conf still no luck..
[root@muttai ~]# lsmod | more
Module Size Used by
i915 67208 2
drm 108768 3 i915
ndiswrapper 249600 0
joydev 14208 0
uvcvideo 62344 0
compat_ioctl32 11520 1 uvcvideo
videodev 37888 2 uvcvideo,compat_ioctl32
psmouse 57116 0
sdhci_pci 10624 0
sdhci 19588 1 sdhci_pci
btusb 15768 0
i2c_i801 12444 0
iTCO_wdt 15184 0
sg 31840 0
serio_raw 8196 0
mmc_core 54624 1 sdhci
i2c_core 26144 1 i2c_i801
iTCO_vendor_support 5636 1 iTCO_wdt
v4l1_compat 17284 2 uvcvideo,videodev
bluetooth 60836 1 btusb
video 22420 0
output 5248 1 video
intel_agp 33136 1
wmi 8896 0
dcdbas 10928 0
thermal 20896 0
processor 46648 3 thermal
fan 7304 0
button 9504 0
battery 14600 0
ac 7176 0
fuse 59584 2
evdev 13984 16
snd_seq_oss 35584 0
snd_seq_midi_event 9344 1 snd_seq_oss
snd_seq 58336 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 9364 2 snd_seq_oss,snd_seq
snd_hda_intel 531124 1
snd_hwdep 10632 1 snd_hda_intel
snd_pcm_oss 45440 0
snd_pcm 82952 2 snd_hda_intel,snd_pcm_oss
snd_timer 24720 2 snd_seq,snd_pcm
snd_page_alloc 11792 2 snd_hda_intel,snd_pcm
snd_mixer_oss 18944 1 snd_pcm_oss
snd 65096 11 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_inte
l,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 9632 1 snd
rtc_cmos 14040 0
rtc_core 21060 1 rtc_cmos
rtc_lib 4992 1 rtc_core
usbhid 41536 0
hid 49856 1 usbhid
ext3 141328 5
jbd 57000 1 ext3
mbcache 10244 1 ext3
dm_mod 62704 0
ohci1394 34612 0
ieee1394 91392 1 ohci1394
sr_mod 18884 0
iwl3945 103416 0
rfkill 13776 1 iwl3945
cdrom 39080 1 sr_mod
mac80211 182960 1 iwl3945
led_class 6280 1 iwl3945
sd_mod 29096 7
tg3 133124 0
libphy 22656 1 tg3
cfg80211 36896 2 iwl3945,mac80211
uhci_hcd 27552 0
ehci_hcd 41356 0
usbcore 160432 7 ndiswrapper,uvcvideo,btusb,usbhid,uhci_hcd,ehci_
hcd
ata_piix 27652 0
ahci 36876 6
ata_generic 8068 0
pata_acpi 7296 0
libata 176352 4 ata_piix,ahci,ata_generic,pata_acpi
scsi_mod 119256 4 sg,sr_mod,sd_mod,libata
[root@muttai ~]# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[root@muttai ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1C:23:FC:D7:1B
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:280 (280.0 b) TX bytes:280 (280.0 b)
[root@muttai ~]# modprobe -r iwl3945
[root@muttai ~]# modprobe iwl3945
[root@muttai ~]# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11abg ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=0 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
[root@muttai ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1C:23:FC:D7:1B
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:280 (280.0 b) TX bytes:280 (280.0 b)
[root@muttai ~]#

Failing to register files??

Similar Messages

Maybe you are looking for