Failover Cluster Validation Report Error with IBM USB Remote NDIS Network device

We are setting up Microsoft Windows Server 2008 R2 Failover Cluster on IBM X3850 X5 and get errors in the Failover cluster Validation Report due to the IBM USB Remote NDIS Network Device is using APIPA adresses and both servers are using same APIPA-adresse.
How should I configure the Server and OS for the Failover cluster to be MS approved?
IBM don't recommend that i disable the Network device, but it is a possible solution!?!

What I did was use ipconfig /all to see the settings it is using and then when and set the ip setting on the NDIS driver to be that except I increment the last value by 1 for each node so that they do not have the same IP address. I ran the
cluster validation again and it came up clean and I have not experienced any issues yet. It does give warnings about it being an Automatic Private IP Address and should not be used, which is ok because we are not going to use it anyways.
Rich Baumet

Similar Messages

Failover Cluster Validation Report with warnings

Hi,
I have 2 Node cluster on windows 2008 R2.I have run cluster validation report and found following warnings pls suggest and guide me health of cluster and how to fix and remove these warnigns. thx.
Validate All Drivers Signed
Validate that tested servers contain only signed drivers.
Validating that the servers contain only signed drivers...
The node 'cluster1.domain.com'has unsigned drivers.
Device Name Device Class Driver Version Driver Date Manufacturer Inf Name Driver Name Device ID Description Status Start Mode
Virtual CloneDrive SCSIADAPTER 5.4.4.3 1/15/2011 12:00:00 AM Elaborate Bytes AG oem1.inf Value Not Found ROOT\SCSIADAPTER\0000 Virtual CloneDrive Value Not Found Unknown
Unsigned drivers were found on one or more of the servers.

Hi,
you need to run iso files at your cluster nodes often?
Well i think you need to provide iso files to your VMs. This is possible without "Virtual CloneDrive"!
I have seen many errors with this kind of software up to bluescreens.
But ok if you really need this software just ignore the warning from cluster validation report.
The cluster will work correctly if this are the only warnings from cluster validation report.
Regards
Sebastian

Access is denied messages in Win2012 R2 Failover Cluster validation report and CSV entering a paused state

Been having some issues with nodes basically dropping out of clusters config.
Error showing was
"Cluster Shared Volume 'Volume1' ('Data') has entered a paused state because of '(c000020c)'. All I/O will temporarily be queued until a path to the volume is reestablished."
All nodes (Poweredge 420) connected a Dell MD3200 shared SAS storage.
Nodes point to Virtual 2012 R2 DC's
Upon running validation with just two nodes, get the same errors over and over again.
Bemused!
List Software Updates
Description: List software updates that have been applied on each node.
An error occurred while executing the test.
An error occurred while getting information about the software updates installed on the nodes.
One or more errors occurred.
Creating an instance of the COM component with CLSID {4142DD5D-3472-4370-8641-DE7856431FB0} from the IClassFactory failed due to the following error: 80070005 Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)).
and
List Disks
Description: List all disks visible to one or more nodes. If a subset of disks is specified for validation, list only disks in the subset.
An error occurred while executing the test.
Storage cannot be validated at this time. Node 'zhyperv2.KISLNET.LOCAL' could not be initialized for validation testing. Possible causes for this are that another validation test is being run from another management client, or a previous validation test was
unexpectedly terminated. If a previous validation test was unexpectedly terminated, the best corrective action is to restart the node and try again.
Access is denied
The event viewer on one of the hosts shows
Cluster node 'zhyperv2' lost communication with cluster node 'zhyperv1'. Network communication was reestablished. This could be due to communication temporarily being blocked by a firewall or connection security policy update. If the problem persists
and network communication are not reestablished, the cluster service on one or more nodes will stop. If that happens, run the Validate a Configuration wizard to check your network configuration. Additionally, check for hardware or software errors related
to the network adapters on this node, and check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.
The Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk.
Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected
such as hubs, switches, or bridges.
Only other warning is because the 4 nic ports in each node server are teamed on one ip address split over two switches - I am not concernd about this and could if required split then pairs, I think this is a red herring????

Hi,
Such events happen because of the following reason:
1- Client for Microsoft Networks and File and Printer Sharing for Microsoft Networks not enabled on all network interfaces. Check this KB article: http://support.microsoft.com/kb/2008795
. Please make sure these two protocols are enabled on all cluster networks
2- Network connectivity issue can cause this event as well. Please make sure the network cabling/Cards/Switches are correctly configured and working as expected
3- Connectivity issue with the storage can also cause this event. Please make sure all the nodes are connected to storage. Check HBA/Cabling connectivity to SAN. Make sure
that the SAN drivers are up-to-date.
4- Antivirus may interrupt network communication and cause this failure. Please exclude CSV volumes from being scanned by AV: http://social.technet.microsoft.com/wiki/contents/articles/953.microsoft-anti-virus-exclusion-list.aspx
5- Disable TCP Chimney related settings on all cluster nodes. http://support.microsoft.com/kb/951037
6- Please check the Network Binding Order (http://social.technet.microsoft.com/Forums/windowsserver/en-US/2535c73a-a347-4152-be7a-ea7b24159520/hyperv-r2-csv-cluster-recommended-binding-order?forum=windowsserver2008r2highavailability)
7- Firewall Rules For All Inbound and Outbound For Cluster and Hyper-V for all the Profiles
8- Update NIC Driver/Firmware.
9- Check Compatibility of the NIC with Windows Server 2012R2
10- Set-NetAdapterRss - Resources and Tools for IT Professionals | TechNet : http://technet.microsoft.com/en-us/library/jj130863.aspx
11- Check the Following Article http://social.technet.microsoft.com/Forums/windowsserver/en-US/e06fede9-931c-4dee-8379-4fd985e20f0a/hypervvmswitch-eventid-106
12- General Updates to be applied on the nodes :
Windows RT 8.1, Windows 8.1, and Windows Server 2012 R2 update rollup: November 2013 : http://support.microsoft.com/kb/2887595
Windows 8.1 and Windows Server 2012 R2 General Availability Update Rollup :
http://support.microsoft.com/kb/2883200
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Network DR test causes Exchange DAG network to fail (Failover Cluster Manager reports comms errors)

We have a DAG configured between 2 mailbox servers, one in each of our main data centres. Our comms team recently performed a DR test between our 2 data centres, switiching from the main production link to the backup link. During this outage the Failover
Cluster Manager reported errors, with each mailbox server reporting the other as uncontactable. The Events that were logged include the following:
Isatap interface isatap.{02ADE20A-D5D4-437F-AD00-E6601F7E7A9D} is no longer active. (EventID 4201)
Cluster node 'MAILBOX_SERVER' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the
Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is
connected such as hubs, switches, or bridges. (EventID 1135)
File share witness resource 'File Share Witness (\\WITNESS_SERVER\SHARE_NAME)' failed to arbitrate for the file share '\\WITNESS_SERVER\SHARE_NAME'. Please ensure that file share '\\WITNESS_SERVER\SHARE_NAME' exists and is accessible by the cluster. (EventID
1564)
Cluster resource 'File Share Witness (\\\WITNESS_SERVER\SHARE_NAME)' in clustered service or application 'Cluster Group' failed. (EventID 1069)
The Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk. Run the Validate a Configuration wizard to check your network
configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges. (EventID 1177)
The Cluster Service service terminated with service-specific error A quorum of cluster nodes was not present to form a cluster. (EventID 7024)
The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service. (EventID 7031)
Looking at the Cluster Events in the Failover Cluster Manager Snap-In i see a heap of Event ID 47 (cannot activate the DAG databases as the server is not up according to Windows Failover Cluster Service) and:
Node status could not be recorded. This could prevent some network failure logic from functioning correctly. NodeStatus:IsHealthy=True,HasADAccess=True,ClusterErrorOverrideFalse,LastUpdate=5/2/2011 8:25:42 AMUTC Failure:An Active Manager operation failed.
Error: An error occurred while attempting a cluster operation. Error: Cluster API '"ClusterRegSetValue() failed with 0x6be. Error: The remote procedure call failed"' failed.. (EventID 184)
Forcefully dismounting all the locally mounted databases on server 'BACKUP_MAILBOX_SERVER. (EventID 307).
Our Comms team doesn't believe it is a comms issue as they did not log any network communication errors between the servers in the two sites (using icmp). So if it is not a comms issue, how can I configure the Failover Cluster Manager to be resilient to
this type of network failover event.
Thanks
Dan

Isn't it also true that in a stretched DAG with even numbered nodes, the PAM needs to be in the same site as the active DAG node? If the connection between both nodes goes down, and the PAM is in the "passive" site, the primary node will
dismount the databases since it can't check with the PAM to make sure its safe for it to be up.
In a even-numbered node stretched DAG, the PAM changes to the DR/passive site everytime a failover occurs, but doesn't automatically switch back when you reactivate the primary node.

Hyper-V cluster validation report "Found duplicate physical address" on nic team interfaces.

I recently built a Windows 2012 Hyper-V cluster with 5 nodes. The validation report shows “duplicate physical address” error (error text pasted below).
The hardware: HP BladeSystem – servers are BL460c blades, in a c7000 enclosure, connected to HP Virtual Connect switches.
Each server has 2 physcal nics, teamed in Windows. In the NIC Teaming console, I created the following Team Interfaces and assigned each a VLAN ID:
“Team1” (the default team)
“Team1 - VLAN 204 – Management”
“Team1 - VLAN 212 - 2012HB”
“Team1 - VLAN 211 -Exchange DAG Replication”
I also created 2 HV Virtual Switches. Neither one allows management interface to share. They are assigned to “Team1” and “Team1 - VLAN 211 -Exchange DAG Replication” respectively.
Therefore, in Network Connection, I see the 2 physical Ethernet nics, and 4 “virtual” nics. Only 2 of them have IP addresses assigned: Management and HB. These are the two that the validation wizard complains
about.
The MAC address is not configurable in the NIC Teaming console, so I don’t see a way to resolve this error, except to use separate physical nics. I don’t want to do that because a) I would lose the benefits of
the bandwidth aggregation that Virtual Connect provides, and b) When creating an Interface on a Team in Windows, it looks like it ALWAYS gives it the same MAC address, so that should be a supported configuration.
Everything works just fine, and there are no other errors or IP conflicts or anything else. But I really want to fix it because I don’t know what unknown problems this may be causing.
From the Cluster Validation report:
Found duplicate physical address 10-60-4B-A9-4A-30 on node Cluster201.OurDomain.local adapter
Team1 - VLAN 212 - 2012HB and node Cluster201.OurDomain.local adapter
Team1 - VLAN 204 - Management.
Found duplicate physical address F0-92-1C-13-3C-2C on node Cluster202.OurDomain.local adapter
Team1 - VLAN 212 - 2012HB and node Cluster202.OurDomain.local adapter
Team1 - VLAN 204 - Management.
Found duplicate physical address 68-B5-99-C1-7E-9C on node Cluster210.OurDomain.local adapter
Team1 - VLAN 212 - 2012HB and node Cluster210.OurDomain.local adapter
Team1 - VLAN 204 - Management.
Found duplicate physical address 3C-4A-92-DE-1E-74 on node Cluster211.OurDomain.local adapter VC-Team - VLAN 212 - 2012HB and node Cluster211.OurDomain.local adapter
VC-Team - VLAN 204 - Management.
Found duplicate physical address 68-B5-99-C0-3D-50 on node Cluster212.OurDomain.local adapter
Team1 - VLAN 212 - 2012HB and node Cluster212.OurDomain.local adapter
Team1 - VLAN 204 - Management.
Thanks!
Dan

Hi Dan,
"It turns out that both hosts had the same default MAC address ranges for their virtual switches. Since the host vNICs were attached to the virtual switch on each host they received the first couple of MAC addresses from the switches.
For details please refer to following link:
http://www.jefflafr.com/blog/4/19/2013/conflicting-mac-addresses-when-building-a-hyper-v-cluster-with-converged-networking
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Rhsnippet.apj Error with RoboHTML 11 Project on Network

I have an RH 11 project on a network drive. The project has 485 snippets. When adding or modifying snippets I get the following error:
An error occurred while trying to read data from <n:\roboHelp Projects\\rhsnippet.apj <1>.
When I open the rhsnippet.apj file, the file is truncated like this:
<file>
<name>mysnippet.hts</name>
<comments></comments
It seems that RoboHelp cannot complete writing to the APJ file.
After closing and reopening the project, I then get a message saying the cpd is corrupt. After deleting the cpd and reopening the project, I still get a message saying the project is corrupt.
The only way I have found to fix the project is to move the project back to a local drive, delete the cpd, delete the rhsnippet.apj file and re-import all the snippets.
I have seen a similar issue which was resolved by moving to another network drive. I moved my project to another network drive but the issue still occurred.
rhsnippet.apj Error with RoboHTML 10 Project on Network
My experience with R10 R11 projects on a network drive has been problematic, despite Adobes assertion that R11 and R10 projects now work on network drives. For example, Adobe support confirmed that RoboHelp does not support projects on a network drive that uses DFS (Distributed File System). I have found that large projects seem to be problematic on network drives.
I suspect that part of this issue is the large amount of snippets I have, as other projects on the network drive don't appear to have this issue as they do not contain a large amount of snippets.
If anybody else has experienced a similar issue with projects on a network drive related to snippets I'd be grateful for some advice.

Thanks for the advice Peter, but deleting the CPD does not fix the issue. I have 500 snippets because I have 500 fields (and growing all the time) to document that can appear in multiple reports and also require that each field is documented separately. So although I seem to be pushing the envelope with the amount of snippets, I am grateful for the existence of snippets because trying to document this without snippets would be a nightmare!
One thing that annoys me is that you cannot apply a style sheet to multiple snippets at the same time. At least I have not found a way. Is there a way of doing this – short of editing the HTML for each snippet individually? I will add this to a feature request for RoboHelp as well as log a bug report with Adobe.

Failover cluster validation errors

We are trying to set up a failover cluster file server between two domain controllers running Windows Server 2012 RC.
When we go through the Validate Configuration wizard, we receive the following errors messages against the Active Directory configuration (names have been changed).
"It could not be determined whether node computer1.example.com is a read only domain controller because of this error: The object does not exist."
and
"Node(s) computer1.example.com computer2.example.com cannot reach a writable domain controller. Please check connectivity of these nodes to the domain controllers."
Does anyone have any ideas why this might be happening? Replication and DNS appear to be working fine for all other services.

I did some tracking down of the problem, and it appears that it stems from the cluster not being able to retrieve the node names. The function specifically is called GetFqdnNodeNamesFromCluster( ).
It can be seen if you run "Get-ClusterLog" while the cluster is in the process of being created. This error seems to be the root of the cluster creation failure. Here is a stacktrace:
PS C:\Users\gamroot> Get-ClusterLog -v
VERBOSE: Connecting to cluster on local computer TESTNODE1.
VERBOSE: at MS.Internal.ServerClusters.Cluster.GetNodes()
at Microsoft.FailoverClusters.PowerShell.FCCmdlet.GetFqdnNodeNamesFromCluster(Cluster cluster, Boolean onlineOnly)
at Microsoft.FailoverClusters.PowerShell.GetClusterLogCommand.WrappedProcessRecord()
at Microsoft.FailoverClusters.PowerShell.FCCmdlet.ProcessRecord()
VERBOSE: at MS.Internal.ServerClusters.Cluster.GetCoreClusterGroup()
at MS.Internal.ServerClusters.SafeFilteredEnumHandle..ctor(Cluster cluster, Boolean filterCoreGroups, Boolean
filterCoreResources)
at MS.Internal.ServerClusters.SafeClusterEnumHandle..ctor(Void* enumHandle, Cluster cluster, ClusterEnumType
enumType, SafeClusterEnumHandleOptions options, SafeClusEnumHandleType safeClusEnumHandleType)
at MS.Internal.ServerClusters.NativeMethods.ClusterOpenEnum(Cluster cluster, ClusterEnumType enumType,
SafeClusterEnumHandleOptions options)
at MS.Internal.ServerClusters.Cluster.GetNodes()
VERBOSE: at MS.Internal.ServerClusters.ClusterRegistryKey.GetValue(String name)
at MS.Internal.ServerClusters.Cluster.GetCoreClusterGroup()
VERBOSE:
Get-ClusterLog : Failed to retrieve the list of nodes for 'TESTCLUSTER1'.
Could not retrieve the core cluster group for the cluster 'TESTCLUSTER1'.
An error occurred while querying the value 'ClusterGroup'.
Element not found
At line:1 char:1
+ Get-ClusterLog -v
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (:) [Get-ClusterLog], ClusterCmdletException
+ FullyQualifiedErrorId : NotFound,Microsoft.FailoverClusters.PowerShell.GetClusterLogCommand

Failover cluster validation tool report

I have two same model and config HP server form 2 nodes cluster, in Windows 2008R2 enterprise, when use failover cluster manager validate a configure, the result report said system configuration - software update level, some software updates missing on 1
node:
KB3029944, KB3023562, KB3021952, KB3013455, KB3004394, KB2980245, KB2926765, KB2913152, KB2862966, KB2847311 and KB2709981 (all version is correct for Windows 2008R2 64bit)
I try manual download from Microsoft and standalone install, all security update get "The update is not applicable to your computer" .
So how to install security update back the sever match 2 nodes software level ?

Both server is same day purchasing inside hardware and firmware is same, only deploy Windows days is not same, Windows update method via internet, if both server is same why after Windows update some
software updates missing on 1 node ?
Honestly the failover cluster manager validate report all pass except system
configuration - software update level not pass, if
I don't care missing updates form cluster any large critical will happen?

PeopleSoft XML Publisher report error with java.io.FileNotFoundException

Hi,
I have created two reports using XML Publisher in Peoplesoft Financials. The two reports are not related and they were submitted for processing separately. The first report completes without any issues. The second report results in error with the following message:
09.11.17 ..(CIS_POTRPT.XML_FILE.Step03) (PeopleCode)
[012309_091118154][oracle.apps.xdo.template.FOProcessor][EXCEPTION] IOException is occurred in FOProcessor.setData(String) with 'files/cis_potrpt.xml'.
[012309_091118500][oracle.apps.xdo.template.FOProcessor][EXCEPTION] java.io.FileNotFoundException: files/cis_potrpt.xml (A file or directory in the path name does not exist.)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java(Compiled Code))
     at java.io.FileInputStream.<init>(FileInputStream.java:89)
     at oracle.apps.xdo.template.FOProcessor.getInputStream(FOProcessor.java:1316)
     at oracle.apps.xdo.template.FOProcessor.getXMLInput(FOProcessor.java:1100)
     at oracle.apps.xdo.template.FOProcessor.setData(FOProcessor.java:372)
     at com.peoplesoft.pt.xmlpublisher.PTFOProcessor.generateOutput(PTFOProcessor.java:53)
2009-01-23-09.11.18.000418 AePcdExecutePeopleCode [174] Exception logged: RC=100.
Error generating report output: (235,2309) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport PCPC:51552 Statement:1153
Called from:CIS_POTRPT.XML_FILE.GBL.default.1900-01-01.Step03.OnExecute Statement:8
2009-01-23-09.11.18.000617 DoStepActions [1797] Exception logged: RC=100.
Process 598607 ABENDED at Step CIS_POTRPT.XML_FILE.Step03 (PeopleCode) -- RC = 24 (108,524)
In the process monitor detail > view log/trace page, the xml file is accessible so the file was generated to a valid directory.
The weird thing is I was able to run this report without any issues few weeks ago although another user also ran into same error. The PeopleCode step that has been identified is essentially same in the two reports. I checked the app server and the directory does exist as well as the xml files for the two reports. The problem does not occur in test environment, just in production. Any help would be appreciated.

We encounter the same problem. Did you get the answer for this issue? Thanks in advance.

Intersection Validation Report error

After clicking the Validate step to get the intersection validation report (Enable Intersection Validation) is turned on, I get the following error in a new window
"The XML page cannot be displayed Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later."
Any help would be appreciated

You can't open the XML directly from the outbox. The user ID that you are accessing the file with will likeyl not have access to the directory where the XSL file is stored. The XSL file is used to translate the XML file into a viewable format.
You can copy the XSL file into a directory where you do have access and modify the XML to look to that directory.
BTW, please open new threads for your questions.
Edited by: TonyScalese on Apr 14, 2011 1:35 PM

Schedule Cluster Validation Report

Is there a way to schedule a validation report to run once a day? We would also need to have Storage deselected in the test selection. Thanks.

Alexey provided you with references to use PowerShell. Here is where you go to learn about the task scheduler -
http://technet.microsoft.com/en-us/library/cc721871.aspx Or, if you want to use PowerShell for that part, too -
http://technet.microsoft.com/en-us/library/jj649816.aspx
Your question really is not related to Hyper-V, though. Is there some other reason you posted in the Hyper-V forum?
. : | : . : | : . tim

Custom xml report errored with :emsg:was terminated by signal 4

Friends,
one of the custom report errored out with the below error:
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 84
stat_high = 0
emsg:was terminated by signal 4
Program was terminated by signal 4
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 5443587.
when browsing metalink I came across few notes and chmged the out put of Active users report to XML which also errored out, the same report was running fine in other environments. we just freshed this from PROD and nothing was changed.
any ideas
Thanks.

Hi Guru,
Application version is 11.5.10.2 and DB 10.2.0.3 running on AIX, Yes it is working on other test environments and production.
here is the error from OPP log
[3/18/10 10:35:17 AM] [UNEXPECTED] [2908896:RT5443609] java.io.FileNotFoundException: /<path>/o5443609.out (No such file or directory)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:129)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:229)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
[3/18/10 10:35:17 AM] [2908896:RT5443609] Completed post-processing actions for request 5443609.
Looks like the output file was not generated as the request errored out.
Thanks.

Failover cluster Validation

Hi
If i have production servers working on hyper v failover cluster and i want for some reason to run the validaion on the failover cluster
what is the consideration before i ran the validation ?
shall i shutdown all vms?
Thanka
MCP MCSA MCSE MCT MCTS CCNA

Hi Yasser,
Here are a few articles that might help. I've pointed out a few of the key comments here, and it appears that storage validation is the only category that will cause downtime. So if you want to validate storage, then yes, you'll need to shut them down.
http://technet.microsoft.com/en-us/library/cc732035(WS.10).aspx (Server 2008/2008R2)
"By default, the wizard warns you if storage tests have been selected but will not be run on storage that is online, that is, storage used by clustered services or applications. In this situation, you can run validation tests (including
storage tests) by creating or choosing a new logical unit number (LUN) from the same shared storage device and presenting it to all nodes. By testing this LUN, you can avoid disruption to clustered services and applications already online within the cluster
and still test the underlying storage subsystem."
http://blogs.msdn.com/b/clustering/archive/2011/06/28/10180803.aspx (Server 2008R2)
"Across these dozens of tests, only a few of them will impact running cluster workloads and these are all within the storage category, so skipping this entire category is an easy way to avoid disruptive tests."
http://technet.microsoft.com/library/jj134244#BKMK_RUN_TESTS (Server 2012/2012R2)
"If a clustered role is using a disk when you start the wizard, the wizard will prompt you about whether to take that clustered role offline for the purposes of testing. If you choose to take a clustered role offline, it will remain offline
until the tests finish."
Thanks,
Jared

Opatch error with IBM AIX6.1 when upgrade from r12.1.1 to r12.1.2

I'm running E-Business Suite (Oracle Financials AR, AP and GL modules only) r12.1.1 on AIX 6.1. I clean install r12.1.1 from rapidwiz. I'm running one Apps tier and one database tier.
Now I perform the upgrade to r12.1.2, and I plan the route to be:
1. Use opatch to apply Database Preparation Path E for DB 11.1.0.7 (ID: 761570.1)
* 7211965
* 7330434
* 7486407
* 7627743
* 7639602
* 7684818
* 8199107
* 8639653
* 8940108
* 9026927
* 9066130
2. Use AutoPatch to apply R12.AD.B.DELTA.2 Patch 8502056
3. Use AutoPatch to apply Release 12.1.2 Patch 7303033
4. Use AutoPatch to apply post-R12.1.2's Database Preparation Path E: 5880762.
5. Use AutoPatch to apply the latest consolidated online help Patch 7303032
6. Use AutoPatch to apply Workflow Interoperability Patch 8291541
Questions:
1. Do I cover all things needed for upgrading from R12.1.1 to R12.1.2, or I have missed or overdone anything?
2. When I now do the upgrade step 1, which needs to run opatch on Database tier, it says as below:
orapth@HK01SO90003:7211965 > opatch apply
Invoking OPatch 11.1.0.6.2
Oracle Interim Patch Installer version 11.1.0.6.2
Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home : /u01/app/oracle/db/erppth/product/11.1.0
Central Inventory : /etc/oraInventory/ebs
from : /etc/oraInst.loc
OPatch version : 11.1.0.6.2
OUI version : 11.1.0.7.0
OUI location : /u01/app/oracle/db/erppth/product/11.1.0/oui
Log file location : /u01/app/oracle/db/erppth/product/11.1.0/cfgtoollogs/opatch/opatch2010-06-03_21-08-18PM.log
Unhandled exception
Type=Segmentation error vmState=0x00000000
J9Generic_Signal_Number=00000004 Signal_Number=0000000b Error_Value=00000000 Signal_Code=00000033
Handler1=09001000A04C1C78 Handler2=09001000A04D4538
R0=000000000000013C R1=0FFFFFFFFFFFE050 R2=0000000111C7FD48 R3=0000000000000400
R4=0700000000342C40 R5=0000000111855668 R6=00000000000009F8 R7=000000000588800E
R8=0000000005888008 R9=00000001119CE4C8 R10=0000000111C7F800 R11=0900000003EB3C38
R12=0900000004379694 R13=000000011000D720 R14=00000001119CE4C8 R15=0000000110098E00
R16=0000000110E7CD70 R17=0000000111B72E80 R18=09001000A04C53B0 R19=0000000000000002
R20=0000000111C7F968 R21=00000001119CE5D0 R22=0000000110098E80 R23=0000000000000000
R24=09001000A04F1A50 R25=09001000A04F13C8 R26=07000000003A36F8 R27=00000001100109B0
R28=0000000000000000 R29=09001000A04BBC98 R30=0FFFFFFFFFFFE5E0 R31=0700000000342C40
IAR=0900000003EB3C38 LR=0000000110662D38 MSR=A00000000000D032 CTR=0900000003EB3C38
CR=2258544B20000004 FPSCR=8200400000000000 XER=2000000482004000
FPR0 4032000000000000 (f: 0.000000, d: 1.800000e+01)
FPR1 3ff0000000000000 (f: 0.000000, d: 1.000000e+00)
FPR2 4033000000000000 (f: 0.000000, d: 1.900000e+01)
FPR3 3fee666660000000 (f: 1610612736.000000, d: 9.500000e-01)
FPR4 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR5 4530000000000000 (f: 0.000000, d: 1.934281e+25)
FPR6 3fb9999999999999 (f: 2576980480.000000, d: 1.000000e-01)
FPR7 3c63333333333333 (f: 858993472.000000, d: 8.326673e-18)
FPR8 0000000082024000 (f: 2181185536.000000, d: 1.077649e-314)
FPR9 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR10 4330000000000000 (f: 0.000000, d: 4.503600e+15)
FPR11 4026000000000000 (f: 0.000000, d: 1.100000e+01)
FPR12 3fe8000000000000 (f: 0.000000, d: 7.500000e-01)
FPR13 4020800000000000 (f: 0.000000, d: 8.250000e+00)
FPR14 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR15 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR16 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR17 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR18 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR19 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR20 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR21 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR22 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR23 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR24 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR25 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR26 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR27 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR28 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR29 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR30 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR31 0000000000000000 (f: 0.000000, d: 0.000000e+00)
Module=/u01/app/oracle/db/erppth/product/11.1.0/jdk/jre/bin/libj9jit23.so
Module_base_address=0900000003E89000
Target=2_30_20070131_11312_BHdSMr (AIX 6.1)
CPU=ppc64 (4 logical CPUs) (0x300000000 RAM)
JVMDUMP006I Processing Dump Event "gpf", detail "" - Please Wait.
JVMDUMP007I JVM Requesting System Dump using '/u02/oradata/staging/r12.1.2/DBPathE/7211965/core.20100603.210818.14745612.dmp'
JVMDUMP010I System Dump written to /u02/oradata/staging/r12.1.2/DBPathE/7211965/core.20100603.210818.14745612.dmp
JVMDUMP007I JVM Requesting Snap Dump using '/u02/oradata/staging/r12.1.2/DBPathE/7211965/Snap0001.20100603.210818.14745612.trc'
JVMDUMP010I Snap Dump written to /u02/oradata/staging/r12.1.2/DBPathE/7211965/Snap0001.20100603.210818.14745612.trc
JVMDUMP007I JVM Requesting Java Dump using '/u02/oradata/staging/r12.1.2/DBPathE/7211965/javacore.20100603.210818.14745612.txt'
JVMDUMP012E Error in Java Dump: /u02/oradata/staging/r12.1.2/DBPathE/7211965/javacore.20100603.210818.14745612.txt
JVMDUMP013I Processed Dump Event "gpf", detail "".
OPatch failed with error code 160
I also experience this when I run:
opatch lsinventory
Please help to solve this problem. Is it also OUI problem? I have tried to upgrade opatch version, and it still cannot solve the problem.
I once tried patch 9216848, it makes the opatch work, but later when I finished installing this patch, I cannot see the forms as it says "magic number problem". Also the adworker always hangs when I do upgrade on R12.1.2 Patch 7303033. So I dun think it is a solution.

Hi
a. cannot open forms with FRM-92101 error code as it says "magic number" issuePlease post the complete error message.Error log of ora/10.1.3/j2ee/forms/forms_default_group_1/application.log
10/06/02 21:03:03.552 formsweb: 10.1.3.4.0 Started
10/06/02 21:08:06.396 formsweb: ListenerServlet init()
10/06/02 21:08:07.781 formsweb: Forms session <1> aborted: runtime process failed during startup with errors exec(): 0509-036 Cannot load program /u01/app/oracle/as/erpdev/product/10.1.2/bin/frmweb because of the following errors:
     0509-150 Dependent module /u01/app/oracle/as/erpdev/product/10.1.2/jdk/jre/bin/classic/libjvm.a could not be loaded.
     0509-103 The module has an invalid magic number.
10/06/02 21:08:07.784 formsweb: Forms session <1> exception stack trace:
oracle.forms.engine.RunformException: Forms session <1> failed during startup: no response from runtime process
     at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
     at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
     at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
     at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:735)
10/06/02 22:02:03.689 formsweb: Forms session <2> aborted: runtime process failed during startup with errors exec(): 0509-036 Cannot load program /u01/app/oracle/as/erpdev/product/10.1.2/bin/frmweb because of the following errors:
     0509-150 Dependent module /u01/app/oracle/as/erpdev/product/10.1.2/jdk/jre/bin/classic/libjvm.a could not be loaded.
     0509-103 The module has an invalid magic number.
10/06/02 22:02:03.689 formsweb: Forms session <2> exception stack trace:
oracle.forms.engine.RunformException: Forms session <2> failed during startup: no response from runtime process
     at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
     at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
     at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
     at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:735)
b. getting hanged in adworkers when compiling objects in applying 7303033 patchAny errors in the workers log files?One of the Adworker log:
The adpatch is hanged because some of its adworkers get this fault:
Start time for file is: Thu Jun 03 2010 10:49:29
JDBC connect string from AD_APPS_JDBC_URL is
(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS=(PROTOCOL=tcp)(HOST=HK01SO90003.hkg.mizuho-sc.com)(PORT=1527)))(CONNECT_DATA=(SERVICE_NAME=pth)))
adjava oracle.apps.ad.worker.AdJavaWorker "(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS=(PROTOCOL=tcp)(HOST=HK01SO90003.hkg.mizuho-sc.com)(PORT=1527)))(CONNECT_DATA=(SERVICE_NAME=pth)))" APPS ***** thin 8 /u01/app/oracle/as/erppth/appl/admin/adUtilMapNew.txt
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/app/oracle/as/erppth/appl/ad/12.0.0/java/adjava.zip:/u01/app/oracle/as/erppth/product/10.1.3/appsutil/jdk/lib/dt.jar:/u01/app/oracle/as/erppth/product/10.1.3/appsutil/jdk/lib/tools.jar:/u01/app/oracle/as/erppth/product/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/app/oracle/as/erppth/comn/java/lib/appsborg.zip:/u01/app/oracle/as/erppth/product/10.1.2/forms/java:/u01/app/oracle/as/erppth/product/10.1.2/forms/java/frmall.jar:/u01/app/oracle/as/erppth/product/10.1.2/jlib/ewt3.jar:/u01/app/oracle/as/erppth/product/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/app/oracle/as/erppth/comn/java/classes"
Calling /u01/app/oracle/as/erppth/product/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.sql.SQLRecoverableException: Io exception: There is no process to read data written to a pipe.
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:101)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:199)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:263)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:521)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:418)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:510)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:203)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:510)
     at java.sql.DriverManager.getConnection(Unknown Source)
     at java.sql.DriverManager.getConnection(Unknown Source)
     at oracle.apps.ad.worker.AdJavaWorker.getAppsConnection(AdJavaWorker.java:1041)
     at oracle.apps.ad.worker.AdJavaWorker.main(AdJavaWorker.java:276)
Caused by: java.net.SocketException: There is no process to read data written to a pipe.
     at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:103)
     at java.net.SocketOutputStream.write(SocketOutputStream.java:147)
     at oracle.net.ns.DataPacket.send(DataPacket.java:150)
     at oracle.net.ns.NetOutputStream.flush(NetOutputStream.java:180)
     at oracle.net.ns.NetInputStream.getNextPacket(NetInputStream.java:169)
     at oracle.net.ns.NetInputStream.read(NetInputStream.java:117)
     at oracle.net.ns.NetInputStream.read(NetInputStream.java:92)
     at oracle.net.ns.NetInputStream.read(NetInputStream.java:77)
     at oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:1034)
     at oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:1010)
     at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOauth(T4CTTIoauthenticate.java:760)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:368)
     ... 8 more
BTW, I'd like to ask where's my Database Initialiation File? I find init.ora and init<SID>.ora in $ORACLE_HOME/dbs in DB Tier, but I cannot find the lines -- pgamax_size. Which file I should edit and what things should I add / remove /edit?
pgamax_size is a hidden parameter (why you need to set this one?).
The PGAMAX_SIZE hidden parameter
http://dba-blog.blogspot.com/2005/08/pgamaxsize-hidden-parameter.html
I want to set the Database Initialiation File because in Database Preparation Guidelines (ID: 761570.1), it says that:
1. Before performing any Applications upgrade or maintenance operations, customers must add the following to the database intialization file to disable fast validation for PL/SQL recompilations:
disablefast_validate=TRUE
The line should be commented out during the normal operation of the Applications system.
2. Customers using Oracle iRecruitment on Oracle Database 11gR1 must add the following line to their database initialization file::
event="31151 trace name context forever, level 0x100"
Setting this event provides a fix for the issue reported in bug 6952870.
3. If you encounter the error:
ORA-04030: out of process memory when trying to allocate 822904 bytes (pga heap, kco buffer)
ORA-07445: exception encountered: core dump [dbgtfdFileWrite()+48]
set the pgamax_size initialization parameter to a larger value as follows: pgamax_size=104857600
and restart your database.
I wonder where I can modify these three parameters (which file to edit, and whether it is append / delete / modify values). Or I do not need to do these three points, or even I do not need to go through Database Preparation Guidelines (ID: 761570.1) because my database is 10.3.4 already?
Thanks!

Need help fixing validation report errors

Here are errors I am getting:
Validator Results
Report date:    April 22 2012
Report time:    06:30:33
Severity
File
Description
Line
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "type" not specified
127
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "type" not specified
128
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
there is no attribute "tabindex"
147
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
there is no attribute "height"
151
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
153
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
154
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
155
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
156
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
159
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
160
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
162
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
163
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
166
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
167
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
168
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
169
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
172
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
173
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
174
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
175
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
185
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
186
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
196
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
required attribute "alt" not specified
197
Error
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
document type does not allow element "link" here
213
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
153
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
153
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "&" is the first character of a delimiter but occurred as data
153
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
153
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
153
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
154
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
154
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "&" is the first character of a delimiter but occurred as data
154
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
154
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
154
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
155
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
155
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
155
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
155
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
156
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
156
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
156
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
156
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
159
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
159
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "&" is the first character of a delimiter but occurred as data
159
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
159
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
159
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
160
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
160
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "&" is the first character of a delimiter but occurred as data
160
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
160
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
160
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
161
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
161
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
161
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
161
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
163
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
163
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
163
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
163
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
166
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
166
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
166
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
166
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
167
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
167
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
167
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
167
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
168
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
168
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
168
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
168
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
169
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
169
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
169
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
169
Warning
C:\Users\Sylvester Aleong\Pictures\KADweb\KAD\KADport1.html
character "<" is the first character of a delimiter but occurred as data
172
Warning

I created a lightbox for my portfolio images and it works in the live view and browser view but when upload it, it does not work. Thanks
Here is the link: designs1.net/portfolio/KAD/index.html
Here is the code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">

</style>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<script src="SpryAssets/SpryAccordion.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<style type="text/css">
#apDiv2 {
    position:absolute;
    width:689px;
    height:538px;
    z-index:2;
    left: 394px;
    top: 107px;
</style>
<link href="SpryAssets/SpryAccordion.css" rel="stylesheet" type="text/css" /><script src="js/jquery-1.7.2.min.js"></script>
<script src="js/lightbox.js"></script>
</head>
<body>
<div class="container">
<div class="header">
    <div id="apDiv1">
      <ul id="MenuBar1" class="MenuBarHorizontal">
        <li><a href="index.html">Home</a>        </li>
        <li><a href="KADres.html">Resume</a></li>
        <li><a href="KADport1.html"><strong>Portfolio</strong></a></li>
        <li><a href="#">Process</a>        </li>
        <li><a href="#">Contact</a></li>
      </ul>
    </div>
</div>
<div class="content">
    <div id="apDiv2">
      <div id="Accordion1" class="Accordion" tabindex="0">
        <div class="AccordionPanel">
          <div class="AccordionPanelTab">PRINT</div>
          <div class="AccordionPanelContent">
            <table width="687" height="196" border="0" cellpadding="5" cellspacing="5">
              <tr>
                <th align="center" scope="col"><a href="images/Large/_5515061140.jpg"rel="lightbox" title="Date Created: 12/4/2011<br><br>Program: Adobe Photoshop & Illustrator<br><br>This poster promotes Ecochic apparel with a tagline that resonates with the whole image appearance."><img src="images/Thumb/_5515061140.jpg" width="107" height="129" /></a></th>
                <th align="center" scope="col"><a href="images/Large/_6374589227.jpg"rel="lightbox" title="Date Created: 2/11/2012<br><br>Program: Adobe Photoshop & Illustrator<br><br>A full color book cover, titled Music in the digital Age, using a combination of vector and raster imagery to express the theme of the book"><img src="images/Thumb/_6374589227.jpg" width="129" height="129" /></a></th>
                <th align="center" scope="col"><a href="images/Large/_4734055001.jpg"rel="lightbox" title="Date Created: 8/21/2011<br><br>Program: Adobe Illustrator<br><br>This poster promotes the natural beauty of Alaska, Mt. McKinley and some of its wildlife to urge residents to take care of the environment."><img src="images/Thumb/_4734055001.jpg" width="129" height="101" /></a></th>
                <th align="center" scope="col"><a href="images/Large/_5593210516.jpg"rel="lightbox" title="Date Created: 1/3/2012<br><br>Program: Adobe Photoshop<br><br>A collage of a designer’s work from the 1920s. "><img src="images/Thumb/_5593210516.jpg" width="129" height="99" /></a></th>
              </tr>
              <tr>
                <td align="center"><a href="images/Large/_1467227833.jpg"rel="lightbox" title="Date Created: 8/12/2011<br><br>Program: Adobe Photoshop & Illustrator<br><br>Poster design promoting support for military soldiers and The American Red Cross"><img src="images/Thumb/_1467227833.jpg" width="129" height="103" /></a></td>
                <td align="center"><a href="images/Large/_1252352166.jpg"rel="lightbox" title="Date Created: 12/4/2011<br><br>Program: Adobe Photoshop & Illustrator<br><br>A book cover redesign for Johannes Itten’s “The Art of Color”. "><img src="images/Thumb/_1252352166.jpg" width="129" height="79" /></a></td>
                <td align="center"><a href="images/Large/_1771736232.jpg"rel="lightbox" title="Date Created: 3/25/2012<br><br>Program: Adobe Photoshop<br><br>
An illustration of the movie Ghost DVD cover with only the use of typography and text effects."><img src="images/Thumb/_1771736232.jpg" width="129" height="91" /></a></td>
                <td align="center"><a href="images/Large/_6554868794.jpg"rel="lightbox" title="Date Created: 8/6/2011<br><br>Program: Adobe Illustrator<br><br>Typographic poster using only words, color, different typefaces and Illustrator tools to illustrate the words of a song that resonate with me personally."><img src="images/Thumb/_6554868794.jpg" width="129" height="99" /></a></td>
              </tr>
              <tr>
                <td align="center"><a href="images/Large/_7292231722.jpg"rel="lightbox" title="Date Created: 1/9/2012<br><br>Program: Adobe Photoshop<br><br> A smoke-like visual text effect using different colors, layers, and the gradient tool."><img src="images/Thumb/_7292231722.jpg" width="129" height="103" /></a></td>
                <td align="center"><a href="images/Large/_9231445618.jpg"rel="lightbox" title="Date Created: 1/25/2012<br><br>Program: Adobe InDesign<br><br>A 2013 calendar design with wildcat animal theme."><img src="images/Thumb/_9231445618.jpg" width="86" height="129" /></a></td>
                <td align="center"><a href="images/Large/_1396958091.jpg"rel="lightbox" title="Date Created: 3/3/2012<br><br>Program: Adobe InDesign<br><br> Brochure design for Rachael Ray cookware company."><img src="images/Thumb/_1396958091.jpg" width="129" height="99" /></a></td>
                <td align="center"><a href="images/Large/_6955454525.jpg"rel="lightbox" title="Date Created: 3/11/2012<br><br>Program: Adobe Illustrator<br><br>Trifold brochure design for Columbia clothing company."><img src="images/Thumb/_6955454525.jpg" width="129" height="99" /></a></td>
              </tr>
              <tr>
                <td align="center"><a href="images/Large/_2121752674.jpg"rel="lightbox" title="Date Created: 10/8/2012<br><br>Program: Adobe InDesign<br><br>A food and wine magazine layout."><img src="images/Thumb/_2121752674.jpg" width="99" height="129" /></a></td>
                <td align="center"><a href="images/Large/_2493972603.jpg"rel="lightbox" title="Date Created: 1/20/2012<br><br>Program: Adobe Photoshop & Illustrator<br><br>Magazine layout for a winter theme."><img src="images/Thumb/_2493972603.jpg" width="129" height="83" /></a></td>
                <td align="center"><a href="images/Large/_6370868564.jpg"rel="lightbox" title="Date Created: 11/19/2011<br><br>Program: Adobe Photoshop & Illustrator<br><br>A mall map created using signage and color coding."><img src="images/Thumb/_6370868564.jpg" width="129" height="83" /></a></td>
                <td align="center"><a href="images/Large/_9581180847.jpg"rel="lightbox" title="Date Created: 11/10/2011<br><br>Program: Adobe Photoshop & Illustrator<br><br> A vehicle wrap design LemonFree.com using typography, vector logos, and images."><img src="images/Thumb/_9581180847.jpg" width="129" height="99" /></a></td>
              </tr>
            </table>
          </div>
        </div>
        <div class="AccordionPanel">
          <div class="AccordionPanelTab">WEB</div>
          <div class="AccordionPanelContent">
            <table width="354" height="199" border="0" cellpadding="5" cellspacing="5">
              <tr>
                <th scope="col"><a href="images/Large/_0373638936.jpg"rel="lightbox" title="Date Created: 3/6/2012<br><br>Program: Adobe Photoshop<br><br>An interface design for the Graphical Arts Gallery and Academy."><img src="images/Thumb/_0373638936.jpg" width="129" height="96" /></a></th>
                <th scope="col"><a href="images/Large/_3824118655.jpg"rel="lightbox" title="Date Created: 3/9/2012<br><br>Program: Adobe Photoshop<br><br>Aninterface design for the new plush character introduced by The Learning Company, a children’s learning software program."><img src="images/Thumb/_3824118655.jpg" width="129" height="87" /></a></th>
              </tr>
            </table>
          </div>
        </div>
        <div class="AccordionPanel">
          <div class="AccordionPanelTab">LOGO</div>
          <div class="AccordionPanelContent">
            <table width="355" border="0" cellspacing="5" cellpadding="5">
              <tr>
                <th scope="col"><a href="images/Large/_0301530214.jpg"rel="lightbox" title="Date Created: 12/4/2011<br><br>Program: Adobe Illustrator<br><br>Logo design for my personal identity package. KADesigns stands for “Katrina Aleong Designs”."><img src="images/Thumb/_0301530214.jpg" width="99" height="129" /></a></th>
                <th scope="col"><a href="images/Large/_0990478412.jpg"rel="lightbox" title="Date Created: 2/23/2012<br><br>Program: Adobe Illustrator<br><br>Logo design for a company'sstationary package in which the letters in the logo stands for the last name of owner of the company."><img src="images/Thumb/_0990478412.jpg" width="129" height="129" /></a></th>
              </tr>
            </table>
          </div>
        </div>
      </div>
    </div>
    <h1> </h1>
</div>
<div class="footer">
    <p> </p>
    </div>
</div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
var Accordion1 = new Spry.Widget.Accordion("Accordion1");
</script><link href="css/lightbox.css" rel="stylesheet" />
</body>
</html>

Failover Cluster Validation Report Error with IBM USB Remote NDIS Network device

Similar Messages

Maybe you are looking for