Failover from MPLS network to EIGRP network, need help.

I hope I explain this right. We are about to add an MPLS Circuit between HA and SA sites. Currently We have HA Connecting to AV site via ATM and SA connecting to AV site via Frame-relay. All routes are via EIGRP.
From what we gather from MPLS you need two subnets to connect to telco. A 30 bit for SA local and a 30 bit for HA local, with what ever in the MPLS cloud.
Our question is this: If the 30 bit HA site subnet goes down and we are at the SA site. How do we get the SA interface to go down so that eigrp will pick up the link/path to the AV site as another path? If the MPLS cloud is up the interface will stay up right?

Check here :
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/cfgnotes/osm_inst/mpls.htm

Similar Messages

I Just updated my iPhone 4 tp 7.1 oS. I am unable to connet to any network. I keep getting the "searching" Np Service" messages on the top let corner of the screen. I also get a notice that say " "unable to load network list. I need help...

I Just updated my iPhone 4 to 7.1 oS. I am unable to connet to any network. I keep getting the "searching" No Service" messages on the top let corner of the screen. I also get a notice that says " "Unable to load network list. I need help... How can one resolve this issue?

No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

VLAN with PAT and 3 networks...I need help with design!

I've been tasked with a major upgrade to my current network and internet access.
1.     I need to have an internal private network with access to the internet. This will be for large meetings, and I'll use a private network with 2048 addresses.
2.     I also will have a small publid network with 8 routable addresses for Firewall, Web Server, PAT (NAT overload) for the above Private network internet access.
3.     I want to split a class C address into two networks to allow one network (128 addresses) for Guest use that need routable addresses, and a second network (the other 128 addresses) for specific meetings that also need routable addresses.
I have:
I have been issued a router from my ISP. They have allocated me one .248 network with 8 addresses (6 usable) and a full class C network.
A Cisco 1841 router with 2 FA ethernet ports. I would like to use one FA port at the outside (to my ISP router) and the other FA port as my Inside port (to all other networks). I will do NAT Overload.
I also have a Layer 3 Catylist 3750 switch.
Do I need to set up VLANs for each Network?
Can I place my network hardware on the 10 network?
Do I need router sub interfaces for my VLANs and can I PAT on a Subinterface?

Hi Brian
1. Do I need to set up VLANs for each Network?
Create seperate VLANS for each subnet and do the intervlan routing on 3750
2. Can I place my network hardware on the 10 network?
Yes
3. Do I need router sub interfaces for my VLANs and can I PAT on a Subinterface?
Not required. You can do the intervlan routing on your Layer 3 3750 switch. From 3750 you can point a default-route to the router.
On the router you can perform PAT based on an ACL. Also you need to add Static NAT for your Webserver etc
Thank you
Raju

I try signing into iMessage and it takes about 45-50 seconds to do. When that happens it tells me there is a network problem. I am positive I don't have a network problem and I need help on this problem please??

I try to sign in and it just takes forever to do I try and try and do it over and over and it brings me the same results. Created a new Apple ID and when I did it still tells me there is a network problem. But the thing is I am still able to use the Internet I need help?? And it does the exact same thing for FaceTime so I don't know what to do??

Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799

Transfering MP3s from PC to iphone 4? need help!

Hi i just recently bought an iphone, but i have an issue that i cannot transfer mp3s to iphone, dont know how to i got imtoo transfer
and itunes on it, but imtoo crashes everytime i run it and with itunes i cant transfer my songs from my pc to my iphone

Your going to have to restore your device to factory settings. Its up to you if you want to restore from backup or as new.
Once the restore is finished, add your MP3's into itunes instead of using this 3rd party software. - Its unnecessary.
If you need help with adding content to itunes and syncing please visit these articles:
- http://www.apple.com/itunes/how-to/
- http://support.apple.com/kb/ht1351
Hope that helps.

RVS4000 Private networking, setting up VLANs need help!

Hello,
I live in a two family residential house and we share a common fibre connection to the internet. In the basement we have a modem/router(zyxel) which is in "bridge mode". Therefore not acting as DHCP.
Behind this zyxel we have a Cisco RVS4000 router. Ports 1 and 2 go to family A, and Ports 3 and 4 go to family B.
Family A and B have separate routers which are both set to "access point mode". Family A has an ASUS RT-N66U router while family B has a dlink DIR-615. The asus has an "access point mode" while the dlink needs to be set up manually to achieve this. The dlink must also have a static IP adress. The asus can receive ip adress.
What I have unsuccessfully tried to achieve and am currently begging for help with is to separate the networks so that both families can access internett, but at the same time it must be impossible to access VLAN1(Family A) from VLAN2(Family B) vice versa. Meaning no communication between the two families through the local network.
I have tried different options but I am not sure how to deal with trunk, tagged, untagged etc. etc. etc. It seems every time I manage to create two different networks there is still accessability/communication between the two VLANs and everytime I manage to give out different IP adresses to different ports i.e. 192.168.10.xx and 192.168.2.xx it is still possible to communicate. What also usually happens is that the internetconnection is severed at the same time.
Could anyone be so kind as to help me out? Since I am quite unseasoned in networking I need a step-by-step guide stating every action I need to take. If possible also with illustrations.
Any help will be much appreciated.

Hello,
It sounds like you have almost everything set up but the vlan tagging on the ports. You will need to have inter-vlan routing disable which it seems like you have already done (enabling this feature will allow vlans to talk to one another). You may need to take a screen shoot of how everything is set up under L2 switch. Make sure all the ports are set to untagged and set to access port, you will need to put VLAN 1 on ports 1 and 2 and VLAN 2 on ports 3 and 4. As long as all the ports are set to access ports and untagged you should be fine at this point.
If you are still having issues take some screen shoots so we can check and see how it is set up.
Edit: while looking at the admin guide I see they are not called access ports. Guess its been a while since I've checked out a RVS4000.
Hope that helps!
Thanks,
Clayton Sill

Connected to network but no connectivity- need help

The Iphone shows network connectivity (bars on left) but when some one calls me the phone appears to be ringing to them but there is no ring on my side. If I try to call someone the call just hangs and when I "end call" it goes to the home screen and when i go to the dialpad the old call is still "dialling". I am not able to use the phone service at all.
The previous time it occured I just reset the Iphone using Itunes and in the process lost all the data but the phone recovered. can some one help me with this?
By the way this problem occured after i changed the OS to 5.

If you look at wifi settings what IP address has been assigned to the iPad? If it starts with 169 then the iPad never successfully connected to the router. What security setting are you using? Some say WPA2 works best. You can also search the ipad wifi forum for similar problems since this problem comes up at least one a day.

Transferring iPhoto albums from old macBook Pro to new - need help!

I am using the firewire to firewire connection to create a disk of my old computer on the desktop of my new computer. It is imperative that I transfer my iPhoto data from my old laptop to my new one with all the labels and albums / folders intact. I have 4 years of photographic microscope data from patient laboratory tests on my old hard drive. These folders are labeled with the patient identifiers and the date of test as well as the diagnosis. I need to have these data on my new computer so I can pull up archived photos to compare new results with past ones. However, when I go to transfer the photos from the old computer the images are only available as "raw" data - that is, I cannot access them as they are arranged in my old computer: folders that have albums by date, subject and lab test. The only images that I can access are what is seen when they are originally imported from the camera (e.g. dsc-0001, etc - not my labels, or my tags, my albums or folders: not "Ms Smith, 12-21-06; positive", etc).
Is there a way that I can import my photos from the old computer into the new one and keep my folders, albums, tags, labels, etc? Or are these data destined to be lost to the archives?
Any help is gratefully appreciated

You should be able to copy your iPhoto library directly to the new computer. It's /Home/Pictures/iPhoto Library. Drag it to the same location on your new computer. Also copy /Home/Library/Preferences/com.apple.iphoto.plist.
Or make things simple and user Migration Assistant on the new computer to migrate your user accounts, third-party applications and support files, and network preferences.
If you have a Time Machine backup you can restore from your TM backup.
Migration Assistant tips and tricks
How to use Migration Assistant to transfer files from another Mac
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009
Message was edited by: Kappy

Error -36. Can't copy files from Internal to External HD. Need Help!

*So I am having difficulty with transferring files from my internal hard drive to any of my external hard drives. Especially when it comes to media files. It keeps giving me an error saying:*
+"The Finder cannot complete the operation because some of the data in *** could not be read or written. (Error code -36)."+
*So I looked up online on what could fix it, and I came across DiskWarrior. I bought the application and ran the software, and did a Check & Repair Disk Permissions for my internal HD as well as my external HD. Everything seemed fine on my external HD, but when I did a diagnostic on my internal, I got this information:*
+DiskWarrior scanned the disk named "Macintosh HD" checking all ﬁles and folders for damage and potential+
+compatibility problems.+
Permissions:
+Started verify/repair permissions on disk disk0s2 Macintosh HD+
+Group differs on "tmp", should be 80, group is 0+
+Permissions differ on "tmp", should be lrwxr-xr-x , they are drwxrwxrwt+
+Permissions differ on "Library/Application Support/ProApps/Internal Plug-Ins/BrowserKit/iLife.bkplugin/Contents/+
+CodeResources", should be -rw-rw-r-- , they are lrw-rw-r--+
+Permissions differ on "System/Library/PrivateFrameworks/BrowserKit.framework/Versions/A/CodeResources ",+
+should be -rw-r--r-- , they are lrw-r--r--+
+Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- ,+
+they are lrw-r--r--+
+Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/+
+CodeResources", should be -rw-r--r-- , they are lrw-r--r--+
+Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/+
+Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r--+
+Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/+
+Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r--+
+Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/+
+CodeResources", should be -rw-r--r-- , they are lrw-r--r--+
+Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/+
+CodeResources", should be -rw-r--r-- , they are lrw-r--r--+
+Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/+
+CodeResources", should be -rw-r--r-- , they are lrw-r--r--+
+Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/+
+Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r--+
+Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/+
+CodeResources", should be -rw-r--r-- , they are lrw-r--r--+
+Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should+
+be -rw-r--r-- , they are lrw-r--r--+
+Permissions differ on "System/Library/PrivateFrameworks/ProKit.framework/Versions/A/Resources/+
+LeopardPanels.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r--+
+Warning: SUID ﬁle "Applications/Utilities/ODBC Administrator.app/Contents/Resources/iodbcadmintool" has been+
+modiﬁed and will not be repaired+
+Warning: SUID ﬁle "Applications/System Preferences.app/Contents/Resources/installAssistant" has been modiﬁed+
+and will not be repaired+
+Warning: SUID ﬁle "Applications/Utilities/Keychain Access.app/Contents/Resources/kcproxy" has been modiﬁed and+
+will not be repaired+
+Warning: SUID ﬁle "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /+
+DiskManagementTool" has been modiﬁed and will not be repaired+
+Warning: SUID ﬁle "usr/sbin/pppd" has been modiﬁed and will not be repaired+
+Warning: SUID ﬁle "usr/sbin/vpnd" has been modiﬁed and will not be repaired+
+Finished verify/repair permissions on disk disk0s2 Macintosh HD+
+Disk: "Macintosh HD"+
+The Property List data was checked in 10,980 ﬁles.+
+The Resource Data was checked in 11,114 ﬁles.+
+The maximum Folder Depth on this disk is 22. This does not exceed the maximum recommended depth.+
+The System Symbolic Link Files were found to be damaged and could not be repaired. The damaged system symbolic link ﬁles are listed below.+
+Location: "Desktop"+
+Folder: "tmp"+
+This folder pointed to by a System Symbolic Link File is missing.+
+Location: "Macintosh HD/private/"+
*From my own knowledge, it seems that I am having an issue with the permissions of the files. I tried repairing them, but it seems DiskWarrior can't repair the files due to the fact that they are either not repairable or they are missing. I hoping I don't have a hardware issue with my HD cause it seems like the issue can't be fixed via software. I have also tried backing-up my drive with Time Machine, but it won't let me do that either. Here are the things that I have tried up until now on how to fix it, and have failed:*
1. Reformatted External HDs to be "Mac OS Extended (Journaled)"
2. Used DiskWarrior and did a Check & Repair Disk Permissions
3. Tried manually changing file permissions.
*If anybody knows how to fix this, besides using the methods I have already tried, please let me know! Thanks!*

First, the permissions messages are not errors. They cannot be repaired. They are innocuous and can be ignored.
Second, Error -36 is not a permissions error. Usually it is related to trying to copy files to a non-OS X formatted drive such as trying to copy a file larger than 2 GBs to an MSDOS formatted drive. The error may also arise when the file being copied is corrupted or has a filename with too many characters or a filename using illegal characters.
The error may occur when trying to sync an iDevice or an iDisk. It also may occur when trying to transfer files from a Mac to a PC over SMB-mounted network storage.
Error -36 is an I/O error. For more see I-O error -36 « fuzzybrain|daisychain|blogdrain.

Weak Wi-fi signal from Actiontec GT704WG B modem/router - need help troubleshooting!

I have been using a Verizon-provided Actiontec GT704WG B modem/router for a few years as my Verizon DSL connection. I connect my main computer to the GT704WG B via one of the Ethernet ports - no problem with this. I also have a laptop that (usually) makes a wi-fi connection to the GT704WG B. However, the wi-fi connection frequently slows down enourmously or dies entirely, at random times. The laptop is located downstairs from the modem/router, which is about the farthest physical location in ther house from the GT704WG B.
This may be a distance problem that might be solved by bringing the modem physically closer to the laptop, but I'm puzzled why the problem is intermittent. It's also possible that there is something wrong with the GT704WG B, that is causing it to transmit a weak signal.
Any suggestions for troubleshooting this problem appreciated.
I'd also like to know if anyone can suggest a router or range extender that might relay a stronger signal downstairs. Or should I try getting a more current modem/router from Verizon? That GT704WG B is a bit old...

You're welcome. I suspect there may be some confusion on which is which going on here. Repeaters and Access Points are two different things. Repeaters are single radio devices in most cases where the repeater takes the signal it is receiving from your router, and then re-broadcasts it. When this is done, half of the radio bandwidth goes towards receiving or sending data to and from your router. The other half of the radio bandwidth is spent transmitting to or receiving data from your devices that are connected to the repeater. It's similar to the game of Telephone. A direct connection to the network is faster, but if you must repeat the message over a medium you introduce delay. So, in more technical terms, a Wireless connection that operates at 20Mbps download or upload (Wireless is half duplex by nature) will operate at 10Mbps download or upload when attached to a repeater, since 10Mbps of the 20Mbps the repeater's radio can do is being used to transmit the message to one end.
In some additional terms since this part of my post got chopped off, what an Access Point is would be essentially another wireless radio with a direct, wired connection to your network. It can be thought of as an Expressway. Each device chooses the best wireless signal to use in your network (Router or Wireless Access Point) and then has a connection directly into the network. Both radios can run at 20Mbps and a single device will be able to get 20Mbps from either unit. These require more work but in heavy wireless usage environments, it makes sense to use access points.
===========================
jduesenb wrote:
Thanks for the advice re. changing the channel. I'll try that. Since there seem to be about a dozen networks around here that mayne causing interference, that might help.
Verizon tech support advised me that an access point would cut my bandwidth, but that a range extender would not. (????) I have installed a range extender but I'm not sure it has made any difference. The problem has not happened since I did that, but since it is intermittent, I don't think that proves that the problem is solved. AFAICS, the wireless speed has not changed in any significant way.
=========================
========
The first to bring me 1Gbps Fiber for $30/m wins!

Friend deleted app (my disk for iphone) and need to get back data from my icloud backup...need help!

     I had this app called my disk (app store name is: Lock photo+video safe - secure folder manager to protect private photos vault & hide secret picture file privacy) This app lets me have two passwords with different pictures and videos in each of them. It's a really great app.
     My friend deleted the app by "accident" and I need to get the app back with all my data. I have a backup of the app on my icloud backup that was taken place two months ago (around same time the app was deleted). It shows up in the cloud saying I have 4gb worth of that app in the cloud. I restore my phone back to that backup but the app data is not there. I wasn't sure if I had to wait till my iphone backs up everything (like music and pictures for example) for it to show up but as soon as the app downloaded I opened it hapilly knowing I have my data back but unfortunately it was not there. In the app itself, there's an option to backup from the cloud but it just brings up this window that says you can back up from the cloud (doesn't have a place to hit that says restore or anything).
     Is there something I am doing wrong? Can anyone help me? I really need that app data back because I have pictures of memories with friends and family inside that app that I do not have anywhere else. Once i get the back back ill be sure to save the photos onto my computer just incase anything goes wrong again.
Thanks everyone for the help!
Nikhil

fwiw
It seems that in a case like this you'd need to reset the device to factory settings and then restore from iCloud backup.
Sadly the reset to factory settings could cause more trouble than its worth.
Apple's iCloud backup, could, but does not let the user restore one app or its data.
You'll also find that even though that App's data is in the cloud, you as its owner do not have access to it.
Hope it helps/

Moving from Linux to Final Cut Pro, Need Help Creating Same Mpeg-4 videos

I am seeking to move into Final Cut Pro to develop these types of videos that I have previously been creating in Linux.
How can Final Cut Pro make these videos in the format specified below (OR VERY CLOSE TO IT)?
Please let me know what settings with screenshots, etc. will make final cut pro output in this way.
MINIMUM output requirements Video codec: Mpeg-4 (divx) with 2400 vbitrate, Audio Codec: MP3 and File container .avi
I look forward to your help, below are the details I've used in Linux, so please help me create these videos using Final Cut Pro.
I need this information by the end of the week.
Thanks!
To Convert from a captured uncompressed video to MPEG-4 (Divx) with MP3
audio at 2400 bits using mencoder
http://www.mplayerhq.hu/DOCS/man/en/mplayer.1.html
mencoder -ffourcc divx capture002.avi -oac mp3lame -ovc lavc -lavcopts
vcodec=mpeg4:vbitrate=2400:v4mv:mbd=2:trell:cmp=3:subcmp=3:mbcmp=3:autoaspect:vp ass=1
-vf harddup -noskip -mc 0 -o test.avi
-------------VIDEO ------------
Video Encoded to Codec (MPEG-4) with ffourcc divx (divx4)
Video Bitrate = 2400 (vbitrate=2400),
Allow 4 motion vectors per macroblock (slightly better quality) (v4mv)
Motion estimation=2 (mbd=2)
Trellis searched quantization. This will find the optimal encoding for
each 8x8 block. Trellis searched quantization is quite simply an optimal
quantization in the PSNR versus bitrate sense (Assuming that there would
be no rounding errors introduced by the IDCT, which is obviously not the
case.). It simply finds a block for the minimum of error and lambda*bits.
(trell)
Sets the comparison function for full pel motion estimation (cmp=3)
Sets the comparison function for sub pel motion estimation (subcmp=3)
Motion Search Algorithm (mbcmp=3)
Same as the aspect option, but automatically computes aspect, taking into
account all the adjustments (crop/expand/scale/ etc.) made in the filter
chain. Does not incur a performance penalty, so you can safely leave it
always on. (autoaspect)
Activates internal two (or more) pass mode, only specify if you wish to
use two (or more) pass encoding. (vpass=1)
duplicate frames (harddup)
no skipping (-noskip)
------------- AUDIO ------------
Audio Encoded to Codec (MPEG-3)
------------- FILE CONTAINER ------------
File Container (.avi)
DOCUMENTATION FOR MENCODER
http://www.mplayerhq.hu/DOCS/man/en/mplayer.1.html#GENERAL%20ENCODING%20OPTIONS% 20(MENCODER%20ONLY)

I need this information by the end of the week.< </div>
Not likely.
Easiest solution is to produce your edited material in FCP and then move the fully rendered, self-contained movie, in whatever format you are producing, to your Linux machine and use its encoder/transcoder.
Compressor will do the job for MP3 and MP4 but you will need to purchase the DIVX codec or transport it to your Mac. You need to talk to DiVX and you need to open the manual for Compressor. Compressor is not easy to learn how to use i na day but whatever you were using on your Linux box was much more difficult to learn.
bogiesan

Exporting from Numbers to Excel - New User needs help!

Hoping someone here can help me out, as I have searched the discussions and still haven't found what I'm looking for. I'm a new Numbers 09 user, and I love it. My experiences with Excel have been nothing short of frustrating, but with Numbers I feel like a spreadsheet wizard.
My problem is basically that I need to export my Numbers created sheets into Excel for use by clients that have not yet made the jump from PC/Excel to Mac/Numbers. This is crucial, as I just don't think I can build this sheet in Excel with the same type of success I have had with Numbers.
My Numbers document has five tables, a custom header graphic and a legend. When I export it to Excel, each table is put on it's own sheet, including the graphic and legend. Is there anyway anyone can help me export this properly or am I doomed to have to spend days learning Excel? Any responses would be appreciated. Thank you very much!
B

B,
It's a shame that you have become a Numbers user but are anchored to the Excel style of Sheet.
Separate Tables in Numbers will always become separate Sheets in Excel. If your clients don't have to write to the Excel document, why not send them a PDF of your Numbers document?
If you must furnish Excel documents to your clients, you're going to have to consolidate your five tables into one if you want everything to come out on one Excel sheet.
Jerry

From Pc to Mac..I need help(

Please, would you be so kind as to give some tips in using Pages-the 1st and the most important problem i have is-.doc files-i cannot open them...What should i do....

Pages: http://www.apple.com/support/pages
MacBook Pro: http://www.apple.com/support/macbookpro
Open, as in from the Finder (desktop view) or from inside from the File menu?
You cannot Save in .doc format, only export
If you need full Office Word then you might want to buy Office 2011 for Mac
For me, old school, a manual is handy to have
http://www.amazon.com/iWork-09-Missing-Manual-ebook/dp/B002OFAY46/
Getting Started
http://www.apple.com/support/switch101/
http://www.apple.com/support/mac101/

Using Automator to save (Text, Dates, Time of event) from safari to iCal ( calendar). Need help!

Hi,
I was wondering if it's possible to have a text from Safari imported directly to iCal calendar. I am running OS X Yosemite 10.10.1.
So again, I was wondering is it possible to create command on Automator that could basically have the text from safari that you highlight then double click and have it imported to iCalendar all in one step. Rather then the traditional copying and pasting from the website or the page to iCal application. It would defiantly save time and could be effective for the services.
I know that currently Safari supports making a "Sticky Note" out of the highlighted text but not iCal Event from the text or date.
Please inform thanks,
Regards

Hi there,
only two ways I can think off, you either have to tick the "Show action" when run button...which will allow you to change the date. But this requires you to do it, so not very automatic !
Daft question, but have you built the workflow and does it always have the same date, when saved as an Application and run on different days ?
Or use a GUI AppleScript, I can't see anything in the iCal dictionary that lets you create a new event...
So depending on your needs, you could add in a "Run AppleScript"
tell application "iCal"
activate
tell application "System Events"
tell process "iCal"
keystroke "t" using command down
delay 1
keystroke "n" using command down
end tell
end tell
end tell
It would open iCal, then go to today and create a new event.
It all depends on your full workflow really. It can be tweaked to suit.
regards
Ric

Failover from MPLS network to EIGRP network, need help.

Similar Messages

Maybe you are looking for