Failover not working correctly on "redundancy-phy" (box to box style)

Hi,
I've got 2 CSS 11506 boxes configured using box to box failover. Failing the master CSS box itself (powering down) causes the backup CSS to become master and all is well.
However when the switch, which the CSS is connected to, fails the CSS didn't fail over so I added the redundancy-phy to both the interfaces connected to the switch and failed the switch again. At this point a "show redundancy" shows the master becoming backup but between 3 and 5 seconds later it re-assumes master status and keeps flipping every 60 - 90 seconds
I also tried a service with a type of redundancy-up and again the same symptoms - fails over but assumes master again within 3--5 seconds.
Any help gratefully received!
Cheers

box-to-box is the least interesting redundancy mechanism.
I definitely prefer vip/interface redundancy.
More complex to configure but better control.
Regarding your problem, is the switch connected to both CSS ? Do you have a direct link between the CSS for the redundancy protocol ? What version do you run ?
Gilles

Similar Messages

IE 9.0 proxy failover not working correctly - Is there a bug fix or IE setting to correct this behavior

I am testing proxy pac file failover using IE 9.0.8112 and testing three choices using an automatic configuration file. I shut down the first proxy to test the fail over to the second. Firefox 20.0.1 and chrome work correctly, but IE 9.0 does
not. My snip-it is as follows:
return "PROXY 192.168.11.12:8080; PROXY 192.168.11.195:8080; DIRECT";
With ie8, firefox and chrome the fail over to the next proxy entry during a PROXY 192.168.11.12 fail over works correct and as follows:
Proxy 192.168.11.12 times out after about 25-30 seconds and then proxy 192.168.11.195 is attempted and the web page is displayed.
Then all url lookups after this time are made through proxy 192.168.11.195 and are quick. This is how proxy fail over should work.
When I test with ie9 it works as follows:
Proxy 192.168.11.12 times out after about 25-30 seconds and then proxy 192.168.11.195 is attempted and the web page is displayed.
Then all following url lookups take 30 -45 seconds because it always tries the first PROXY 192.168.11.12 first before attempting proxy 192.168.11.195
because it does not remember first Proxy 192.168.11.12 is not available.
Is there a setting or bug opened on this behavior????

Not to be pedantic, but the proxy.pac file is JavaScript... :)
You might be experiencing an issue with IE's automatic proxy caching, described here: http://support.microsoft.com/kb/271361 . Basically, the choice of which proxy to use is decided once per requested host, and the decision is cached. So, if you
are testing failover by accessing resources on the same host before and after shutting off the first proxy, IE will still insist on using that proxy address for subsequent requests. If you test a second host and get a more timely response, then I would say
this is what you are seeing.
You can experimentally disable this feature by setting...
[HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings]
"EnableAutoProxyResultCache"=dword:00000000"
...in the registry for your test user. I imagine a reboot will be required.

I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is click event message box will not working correct

I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is button click event message box or popup window will not working correctly. Please any one suggest me the steps to overcome this not responding or slowness in the responding problem of Button click event.

Hello,
In Firefox 23, as part of an effort to simplify the Firefox options set and protect users from unintentially damaging their Firefox, the option to disable JavaScript was removed from the Firefox Options window.
However, the option to disable JavaScript was not removed from Firefox entirely. You can still access it from about:config or by installing an add-on.
'''about:config'''
# In the address bar, type "about:config" (with no quotes), and press Enter.
# Click "I'll be careful, I promise"
# In the search bar, search for "javascript.enabled" (with no quotes).
# Right click the result named "javascript.enabled" and click "Toggle". JavaScript is now disabled.
To Re-enable JavaScript, repeat these steps.
'''Add-ons'''
You can alternatively install an add-on that lets you disable JavaScript, such as
*[https://addons.mozilla.org/firefox/addon/noscript/ No-Script] (to disable JavaScript on a per page basis, as required)
*[https://addons.mozilla.org/firefox/addon/quickjava/ QuickJava] (to easily disable and enable JavaScript, automatic loading of images, and other content)
Thank you and I hope this helps!

Function keys are not working correctly

I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

Spry tab not working correctly after custom changes

Hi,
i have used Spry Widget for making tabs in Dreamweaver for one of my project. i have customize these tabs. every thing was working fine until i add the horizontal scrolling to tab by jquery. tabs are not working correctly they do not show the tab content. i am sure there is some linking issue. all this problem begin when i added a addition div within the spry div tags if i remove <div style="overflow: hidden;" class="sc_menu" > every thing start working fine but this div control the scrolling and its important to put there. please can any one guide me what i am doing wrong i have uploaded the project to my server. below is the zip file link to download.
http://khurram.visbl.com/test.zip
please let me know if someone having problem in downloading above zip file. also waiting to find a solution for above. hope anyone is here who knows the solution
Best - Khurram

Sorry to disappoint, the structure of the tabbed panels is
<div id="TabbedPanels1" class="TabbedPanels">
<ul class="TabbedPanelsTabGroup">
    <li class="TabbedPanelsTab" tabindex="0">Tab 1</li>
    <li class="TabbedPanelsTab" tabindex="0">Tab 2</li>
</ul>
<div class="TabbedPanelsContentGroup">
    <div class="TabbedPanelsContent">Content 1</div>
    <div class="TabbedPanelsContent">Content 2</div>
</div>
</div>
As soon as you change that structure, this widget (out-of-the-box) will not work.
Gramps

Sleep not working correctly

Since updating my Late 2010 iMac to Moutain Lion the sleep function does not work correctly. They system keep waking up for no reason. The monitor comes comes day or night. I cannot figure out a fix or work around. Any ideas?

Please read this whole message before doing anything. This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it. Step 1 The purpose of this step is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.” While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin. Test while logged in as Guest. Same problem(s)? After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. Step 2 The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Test while in safe mode. Same problem(s)? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

ITunes Store Pages not working correctly

Since a few days ago iTunes Store (on full page) is not working correctly. The "pictures at the top" do NOT rotate any more (usually every 10 seconds or so before) often with blanks too. Also when clicking on an Lp information the box appears but Blank too. I have tried all the usual methods - permissions and disc checks etc. If I use small page (not full) it seems to work OK. The problem began after Safari 5 arrived. Anyone else having iTunes problems like this? (Similiarly the Dictionary Application with Wikipedia is not working correctly - but thats another issue!). Any answers out there??
Message was edited by: Dave Jelfs

This issue has now been completely resolved with the introduction of iTunes 9.2 Everything up and running again - thank you Apple! (Still an issue with Dictionary app/Wikipedia not functioning correctly, this has not been resolved)

[solved] NFS client will not work correctly

I have all my $HOME on an NFS Server. So long I used suse and debian, now I want switch to arch but the nfs-client ist not working correctly:
I start "portmap nfslock nfsd netfs" over rc.conf. When I do a "rpcinfo -p <ip-arch-system>" I got the following
stefan:/home/stefan # rpcinfo -p 192.168.123.3
Program Vers Proto Port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100021 1 udp 32768 nlockmgr
100021 3 udp 32768 nlockmgr
100021 4 udp 32768 nlockmgr
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100021 1 tcp 48988 nlockmgr
100021 3 tcp 48988 nlockmgr
100021 4 tcp 48988 nlockmgr
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100005 3 udp 891 mountd
100005 3 tcp 894 mountd
As you see "status" is missing, so the statd is not running. It sould look like the result on my suse box:
stefan:/home/stefan # rpcinfo -p 192.168.123.2
Program Vers Proto Port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 32768 status
100021 1 udp 32768 nlockmgr
100021 3 udp 32768 nlockmgr
100021 4 udp 32768 nlockmgr
100024 1 tcp 35804 status
100021 1 tcp 35804 nlockmgr
100021 3 tcp 35804 nlockmgr
100021 4 tcp 35804 nlockmgr
There is the "status" line and so the statd is running.
How can I fix that problem, so that statd ist running on my arch box too?
Last edited by stka (2007-06-10 15:59:48)

The Problem ist solved.
I use ldap for authentication. During the setup of the ldapclient I copied the nsswitch.ldap to nsswitch.conf. But the line for "hosts:" was:
hosts: dns ldap
but in my dns ist no localhost entry. After I changed this line to:
hosts: files dns ldap
everything was ok. The statd is now running and I can start to migrate to archlinux ;-)

Sonata font on MacOS - not working correctly

Hi,
I just downloaded and installed the Sonata Standard OpenType file via FontBook in MacOS 10.9.2. So far the font is not working correctly in either MS Word or Apple Keynote -- I get standard qwerty letters rather than musical notation. Anyone ideas on how to fix/troubleshoot?
Thanks!

Hello RKmark,
Thank you for going through the process of using those custom keyboard layouts. It was my pleasure to work on those some years ago.
There is a reason why the placement of some characters on those custom layouts seems arbitrary: They were intended to replace the experience a user would have when using the same PostScript font, which was directly mapped to the characters available on the keyboard. Of course they could be re-arranged today – but that would mean opening a whole different project; and would probably question some of the semantics within Sonata.
Back to your problem:
I just tested the keyboard layout for Sonata, together with the Sonata OTF in InDesign, and I did not find any problems.
Of course this does not help you. So let me just describe what I did:
I copied the OTF file, to ~/Library/Fonts
I copied SonataStd.keylayout to ~/Library/Keyboard Layouts
Admittedly, in OSX Mavericks it is a bit more complicated to install a custom keyboard layout:
In System Preferences, go to Keyboard and Input Sources.
Click the + button at the bottom left, scroll down the list and select “Others”.
In the list to the right, you will find a “SonataStd” keyboard layout, it has a grey icon. Click Add.
After adding this layout, you will be taken back on the Input Sources screen. Check the box next to Show Input in menu in menu bar if it is not yet active.
Back in InDesign, create a new text box, select SonataStd, and choose the SonataStd keyboard layout from the menu bar (marked by the flag of the country representing your keyboard).
Now you can begin typing. I could type the sixteenth-note-rest on a US keyboard with alt-x.
However, one thing I have observed:
If you have set any custom keyboard shortcuts in InDesign that are using the alt-key; they might get in the way of typing some of the symbols.
Which of the available symbols in Sonata are you missing in the custom keyboard layout? I tested them all, and could type everything.
What sometimes happens is that the keyboard layout will switch back to default (US in my case), which then looks like the Sonata keyboard layout is not working.
My personal opinion on this: The keyboard layouts are a nice idea for making glyphs accessible to users that don’t have a glyph palette, but they can be very confusing. They will interfere with the normal usage of the application and OS, since standard keyboard shortcuts will no longer work – simply because they rely on the standard keyboard layout of your system.
Personally, I would use the glyph palette in most cases, simply because switching keyboard layouts back and fort would get to tedious for me.
I hope this helps, let me know if you have any further questions.

HT6114 my audio midi setup is not working correctly since the install of maverick os

my audio midi setup is not working correctly since the install of maverick os

The upgrade may have reset to default settings ..
Check System Preferences > Sounds > Output
Make sure the correct device is selected and the Mute box is not checked.

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

If statement within a view is not working correctly ?

Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
     <htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
     </htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias Hlubek

Matthias,
The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is <b>NOT</b> initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
    hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian

** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric field

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Key Figure calculation in Abap is not working correctly - Overlooping

Hi,
I wrote a logic to calculate the ratio of key figure but it is not working correctly
For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
Sample
A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 = 200
PRODUCT3 0.7 = 1000 * 0.7 = 700
The total amount of this new products is 1000.
Now my logic is working this way.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
Logic used
DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
DATA: amount LIKE data_package-netamount.
DATA: zidx LIKE sy-tabix.
REFRESH t_data.
LOOP AT data_package.
zidx = sy-tabix.
MOVE-CORRESPONDING data_package TO t_data.
REFRESH t_newdso.
SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
data_package-prod.
SORT t_newdso BY prod.
*LOOP AT T_NEWDSO.
READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
IF sy-subrc EQ 0.
    LOOP AT t_newdso.
      t_data-prod = t_newdso-/bic/znew_mp.
      t_data-material = t_newdso-material.
*T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
      APPEND t_data.
    ENDLOOP.
ELSE.
    REFRESH t_olddso.
    SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
    data_package-prod.
    SORT t_olddso BY prod.
    READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
    t_data-prod = t_olddso-prod.
    t_data-material = t_olddso-material.
    APPEND t_data.
ENDIF.
MODIFY data_package INDEX zidx.
ENDLOOP.
REFRESH data_package.
data_package[] = t_data[].
thanks
Edited by: Matt on Sep 27, 2010 2:25 PM - added tags

Hi,
I am not really good at debugging Abap code since I am a newbie. however I have tried to add CLEAR T_DATA before the first loop.
REFRESH T_DATA.
LOOP AT DATA_PACKAGE.
ZIDX = SY-TABIX.
MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
and before the second loop and select statement and at the end of the loop.
REFRESH T_NEWDSO.
SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
DATA_PACKAGE-PROD.
SORT T_NEWDSO BY PROD.
READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
IF sy-subrc EQ 0.
LOOP AT T_NEWDSO.
but then not all data are being fetched.
thanks
Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

Email pushing not working correctly for office email - 3 seperate devices/carriers

We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin Talbot

Potential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile]

Failover not working correctly on "redundancy-phy" (box to box style)

Similar Messages

Maybe you are looking for