FailoverClustering Event ID 5125

I have two Server 2012 Hosts running in a cluster with some CSV's setup. I just recently started receiving this warning on one of the hosts. The host has also blue screened a few times. I'm trying to figure out what these drivers might be. Does anyone know
how I can see what filter drivers are loaded and potentially remove them? I thought the issue may be related to the anti-virus software that was installed but the issue is still present after removing the software and rebooting the server.
Cluster Shared Volume 'LUN' ('') has identified one or more active filter drivers on this device stack that could interfere with CSV operations. I/O access will be redirected to the storage device over the network through another Cluster node. This may result
in degraded performance. Please contact the filter driver vendor to verify interoperability with Cluster Shared Volumes.
Active filter drivers found:
(Chinese Characters)????䠀???e???????Q?????N???I????㐀㠀?Q?H?????Q??
Vincent Sprague

Hi,
As you said it could be caused by third party application:
Event ID 5125 — Cluster Shared Volume Functionality
http://technet.microsoft.com/en-us/library/ee830322(v=ws.10).aspx
Resolve
CSV - Confirm filter driver
If you do not currently have Event Viewer open, to view the event message, see "To open Event Viewer and view events related to failover clustering." View the event message to see if the name of a filter driver is displayed. Review any software
or drivers that relate to managing or working with your storage devices. Contact the vendors of the software or drivers to confirm that they are tested and compatible with Cluster Shared Volumes.
To perform the following procedure, you must be a member of the local Administrators group on the node in the failover cluster, or you must have been delegated the equivalent authority.
To open Event Viewer and view events related to failover clustering:
If Server Manager is not already open, click Start, click Administrative Tools, and then click Server Manager. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue.
In the console tree, expand Diagnostics, expand Event Viewer, expand Windows Logs, and then click System.
To filter the events so that only events with a Source of FailoverClustering are shown, in the Actions pane, click Filter Current Log. On the Filter tab, in the Event sources box, select FailoverClustering. Select other options as appropriate, and then
click OK.
To sort the displayed events by date and time, in the center pane, click the Date and Time column heading.
However you mentioned that active filter drivers are found as Chinese Characters - could you capture a screenshot of it as the output in your reply is messy code.
For your information, this blog also provided troubleshooting thought.
http://blogs.technet.com/b/askcore/archive/2010/12/16/troubleshooting-redirected-access-on-a-cluster-shared-volume-csv.aspx
If you have any feedback on our support, please send to [email protected].

Similar Messages

Exchange Server CCR 2007 unable to see the File Share Witness resulting in mailbox failover ?

Hi people,
Here's my Exchange Server 2007 SP3 in the ideal and normal situation:
Mailbox Server (CCR – Stretched Cluster) Nodes
PRODEXMBX01-VM (Active Mailbox, Quorum) – 10.1.1.53
DREXMBX01-VM (Passive mailbox) – 192.168.1.88
Hub Transport and Client Access Server Nodes
PRODEXHTCAS02-VM – 10.1.1.54
PRODEXHTCAS03-VM (FSW holder) – 10.1.1.55
DREXHTCAS02-VM – 192.168.1.89
Saturday early morning, for some unknown reason the Active Mailbox Server (PRODEXMBX01-VM)
cannot access or see the FSW on the HT server PRODEXHTCAS03-VM, thus
the mailbox gets failover to the DR Mailbox server (DREXMBX01-VM).
Here’s the Events logged:
Log
Name:      System
Source:        Microsoft-Windows-FailoverClustering
Event ID:      1564
Task Category: File Share Witness Resource
Level:Critical
User:          SYSTEM
Computer:      PRODEXMBX01-VM.domain.com
Description:
File
share witness resource 'File Share Witness (\\PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01)'
failed to arbitrate for the file share '\\ PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01'.
Please ensure that file share '\\ PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01'
exists and is accessible by the cluster.
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Event ID:      1177
Task Category: None
Level:       Critical
User:     SYSTEM
Computer:PRODEXMBX01-VM.domain.com
Description:
The Cluster service is shutting down because quorum was lost.
This could be due to the loss of network connectivity between some or all nodes
in the cluster, or a failover of the witness disk.
Run
the Validate a Configuration wizard to check your network configuration. If the
condition persists, check for hardware or software errors related to the
network adapter. Also check for failures in any other network components to
which the node is connected such as hubs, switches, or bridges.
So I had to perform manual failover back from DR to production so that both Active mailbox and the Quorum
are held by the Production Mailbox server (PRODEXMBX01-VM).
On Sunday Morning, the Event ID Critical 1564 occurred again thus causing only the quorum only to failover
to the DR mailbox server (DREXMBX01-VM) but the Active mailbox role is still held by the Production Exchange server (PRODEXMBX01-VM).
So now the situation is like the following:
Mailbox Server (CCR – Stretched Cluster) Nodes
PRODEXMBX01-VM (Active Mailbox) – 10.1.1.53
DREXMBX01-VM (Passive mailbox, Quorum) – 192.168.1.88
Hub Transport and Client Access Server Nodes
PRODEXHTCAS02-VM – 10.1.1.54
PRODEXHTCAS03-VM (FSW holder) – 10.1.1.55
DREXHTCAS02-VM – 192.168.1.89
So what causing the mailbox servers unable to contact the File Share Witness?
/* Server Support Specialist */

Did you check the blog above?
The account used in the clustered machine should have access to
\\PRODEXHTCAS03-VM\FSM_DIR_ExMbxCluster01. Please check the permissions. Try giving full permission to admins as well (just to try)
MAS
I've followed this (http://technet.microsoft.com/en-us/library/bb124922(v=exchg.80).aspx) instruction and there is no mentioning other than the Cluster Service Account.
/* Server Support Specialist */

Inexplainable 2008 Failover Cluster Issues

Hi,
We have a 2008 Failover Node & Disk Majority SQL 2005 cluster.
There are 2 nodes in the cluster with 2008 Ent 64-bit SP2 installed.
At around 00:20 each morning we see various FailoverClustering errors in the event logs on both servers.
EventID: 1135, 1069, 1177
Before the FailoverClustering events are seen, 2 informational events appear regarding the 'Microsoft Failover Clustering Virtual Adapater'
EventID: 4201 'The system detected that network adapter Local Area Connection* 9 was connected to the network, and has initiated normal operation.'
This is causing the resources to failover to the secondary node.
I have run the Cluster Validation Wizard and everything passes. I have disabled the Windows Firewall service on both nodes.
We are presenting the storage via NetApp and the nodes have 3 nics installed
NIC1 - Server Vlan - Speed/Duplex Set to 1000Mb Full
NIC2 - Storage Vlan - Speed/Duplex Set to 1000Mb Full
NIC3 - Heartbeat - Speed/Duplex Set to 100Mb Full
Please can anyone help me troubleshoot these issues ?
Thanks
Scott

Hi Scott,
Event ID 1135 — Cluster Service Startup
http://technet.microsoft.com/en-us/library/dd353973(WS.10).aspx
Event ID 1069 — Clustered Service or Application Availability
http://technet.microsoft.com/en-us/library/dd353893(WS.10).aspx
Event ID 1177 — Quorum and Connectivity Needed for Quorum
http://technet.microsoft.com/en-us/library/dd353872(WS.10).aspx
Event ID 4201 — TCP/IP Network Interface Connectivity
http://technet.microsoft.com/en-us/library/dd392958(WS.10).aspx
Hope it helps.
Tim Quan - MSFT

Constantly "Cluster resource 'Virtual Machine' in clustered service or application 'SERVER' failed

Hi...
I have an IBM BladeCenter S with 3 blades and an IBM System Storage DS3300 (ISCSI).
In each blade is running Windows Server 2008 R2 with
HYPER-V,
Failover Clustering with Cluster Shared Volumes.
I have observed that many errors occur constantly in "Failover Cluster Manager" and some VM´s are relocated to another blade automatically, however thoses VM´s sometimes no longer responds to network activity.
The errors I have observed in the "Failover Cluster Manager" are:
Source: Microsoft-Windows-FailoverClusting
Event ID: 1069
Description:
Cluster resource 'Virtual Machine' in clustered service or application 'SERVER' failed.
Source: Microsoft-Windows-FailoverClusting
Event ID: 1205
Description:
The Cluster service failed to bring clustered service or application 'SV-DBURAS' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
Another error (warning type) that is constantly generated in the SYSTEM events (Mirage is the storage name):
Source:        ds4dsm
Event ID:      769
Description:
IO error being retried via alternate controller Mirage:1
Source:        ds4dsm
Event ID:      10
Description:
Mirage:0 Failover command issued.
Source:        ds4dsm
Event ID:      801
Description:
Failover succeeded to Mirage:0.
Thank you in advance any help!

Hi,
I suggest referring to the following articles:
http://technet.microsoft.com/en-us/library/cc756225(WS.10).aspx
http://technet.microsoft.com/en-us/library/cc773525(WS.10).aspx
Tim Quan - MSFT

Hyper-V Guest Cluster Node Failing Regularly

Hi,
We currently have a 4-node Server 2012 R2 Cluster witch hosts among other things, a 3 node Guest Cluster running a single clustered file service.
Around once a week, the guest cluster node that is currently hosting the clustered file service will fail. It's as if the VM is blue screening. That in itself is fairly anoying and I'll be doing all the updates and checking event log for clues
as to the cause.
The problem then is that whichever physical cluster node that is hosting the VM when it fails, will not unlock some of the VM's files. The Virtual machine configuration lists as Online Pending. This means that the failed VM cannot be restarted
on any other cluster node. The only fix is to drain the physical host it failed on, and reboot.
Looking for suggestions on how to fix the following.
1. Crashing guest file cluster node
2. Failed VM with shared VHDX requiring Phyiscal host reboot.
Event messages for the physical host that was hosting the failed vm in order that they occured.
Hyper-V-Worker: Event ID 18590 - 'FS-03' has encountered a fatal error. The guest operating system reported that it failed with the following error codes: ErrorCode0: 0x9E, ErrorCode1: 0x6C2A17C0, ErrorCode2: 0x3C, ErrorCode3: 0xA, ErrorCode4:
0x0. If the problem persists, contact Product Support for the guest operating system. (Virtual machine ID 36166B47-D003-4E51-AFB5-7B967A3EFD2D)
FailoverClustering: Event ID 1069 - Cluster resource 'Virtual Machine FS-03' of type 'Virtual Machine' in clustered role 'FS-03' failed.
Hyper-V-High-Availability: Event ID 21128 - 'Virtual Machine FS-03' failed to shutdown the virtual machine during the resource termination. The virtual machine will be forcefully stopped.
Hyper-V-High-Availability: Event ID 21110 - 'Virtual Machine FS-03' failed to terminate.
Hyper-V-VMMS: Event ID 20108 - The Virtual Machine Management Service failed to start the virtual machine '36166B47-D003-4E51-AFB5-7B967A3EFD2D': The group or resource is not in the correct state to perform the requested operation. (0x8007139F).
Hyper-V-High-Availability: Event ID 21107 - 'Virtual Machine FS-03' failed to start.
FailoverClustering: Event ID 1205 - The Cluster service failed to bring clustered role 'FS-03' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered role.

Hi,
I don’t found the similar issue, Does your cluster can pass the cluster validation? Does all your Hyper-V host compatible with Server 2012r2? Have you try to disable all your
AV soft and firewall? Please rerun Storage validation on the Cluster in non-production hours, the cluster validation report will quickly locate the issue.
More information:
Cluster
http://technet.microsoft.com/en-us/library/dd581778(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cluster for mail server

Hi
SCAN is typically used for RAC.is there any similar thing can be used for qmail / zimbra CS?ZCS has option for ZCS archived server which is usually implemented REDHAT cluster.Can we implement it with other cluster eg. lasture cluster Or anyother?
kind regards

===
Source:
Microsoft-Windows-FailoverClustering
Event ID:
1196
Task Category: Network Name Resource
Description:
Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason: DNS operation refused. Ensure that the network adapters associated with dependent IP address resources are configured with
at least one accessible DNS server.
===
Source:
Microsoft-Windows-FailoverClustering
Event ID:
1579
Task Category: Network Name Resource
Description:
Cluster network name resource 'Cluster Name' failed to update the DNS record for name over adapter. The error code was 'DNS operation refused. (9005)'. Ensure that a DNS server is accessible from this cluster node and contact your DNS server administrator
to verify the cluster identity can update the DNS record...
I got tons of above two errors, thanks for the suggestion of deletion and re-creation of existing A record - it worked
nicely for me. No more errors so far.

Windows 2008 R2 SP1 Exchange DAG event 1196 and 1579 Bad DNS Key

Hi,
I'm running an Exchange 2010 SP1 DAG on Windows 2008 R2 SP1. We are using an INFOBLOX appliance for DNS resolution.
DNS resolution is working and SRV records are created.
On one of the two clusternodes I get warning 1579 and error 1196 every 15 minutes. After looking around on the internet and technet, I found kb 977158 stating the problem and resolution. However this hotfix is not applicabel on Windows
2008 R2 SP1 .
How can I resolve these annoying events?
Event 1196 failoverClustering:
Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason:
DNS bad key.
Ensure that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server.
Event 1579 Failover Clustering
Cluster network name resource 'Cluster Name' failed to update the DNS record for name 'DAG.domain.local' over adapter 'NIC1-LAN'. The error code was 'DNS bad key. (9017)'. Ensure that a DNS server is accessible from this cluster node and contact your DNS
server administrator to verify the cluster identity can update the DNS record 'DAG.domain.local'.
Frederik

Cause:
The cluster name resource which has been added to the DNS prior to setup active passive cluster ( or any type) need to be updated by the Physical nodes on behalf of the resource record itself. When the active node owns the resources it want to update the
A record in the DNS database and DNS record which was created won’t allow any authenticated user to update the DNS record with the same owner
Solution:
Delete the existing A record for the cluster name and re-create it and make sure select the box says “Allow any authenticated user to update DNS record with the same owner name “Don’t worry about breaking anything , this has “ZERO”
impact to cluster simply delete the A record and re-create as it is suggested here.
http://amradmin.wordpress.com/2011/01/27/event-id-1196-1119-dns-operation-refused-cluster-servers/
Thanks,
Amr Tantawi |MCITP |EMA

Cluster Events Query Incomplete

I have a six-node 2012 R2 Failover Cluster running Hyper-V. When I go to Cluster Events, it says on the title: "Cluster Events (0 events, query incomplete)". When I query one node at a time, only node 2 returns results, and every other
node says "query incomplete". I can read all the event logs separately through remote MMC. What does this mean, "Cluster Events (query incomplete)", and how do I get all the nodes to report in?

Hi rpseekell,
Please refer the following article to confirm whether this node FailoverClustering ETW session is running. Please install the Recommended hotfixes and updates for Windows
Server 2012 R2-based failover clusters updates.
The related article:
View Events and Logs for a Failover Cluster
http://technet.microsoft.com/en-us/library/cc772342.aspx
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
http://support.microsoft.com/kb/2920151
How to create the cluster.log in Windows Server 2008 Failover Clustering
http://blogs.msdn.com/b/clustering/archive/2008/09/24/8962934.aspx
Windows Server 2008 and R2 Cluster Log Appears to Be Missing Gaps of Data
http://blogs.technet.com/b/thbrown/archive/2010/07/31/windows-server-2008-and-r2-cluster-log-and-missing-gaps-of-data.aspx
The similar thread:
Cluster events not written to system event log
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b713b63c-4674-4491-847c-75c6f8b9ea55/cluster-events-not-written-to-system-event-log
How to find event log and system information of Nodes in Cluster
http://social.technet.microsoft.com/Forums/windowsserver/en-US/59365d4f-1a10-4c6d-bead-496bf67628e2/how-to-find-event-log-and-system-information-of-nodes-in-cluster?forum=sqlgetstarted
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cluster Service 1146 & 1230 event id

Dear Team,
I am facing a cluster problem in server 2012 r2 its showing me error event id 1146 & 1230
i am not able to start my cluster service my production is total down please help
Here is log with this link pls help
https://onedrive.live.com/redir?resid=4A228E11EF76B735!193&authkey=!AKCOUxUeE4FEu8A&ithint=file%2ctxt
Ravi Tandon
8400414038

Hi,
The log is incomplete. The error 1146 or 1230 is not included in the log file you uploaded.
According to my search result, error 1146 & 1230 could be caused by dll crash issue. You can search in your local log file to see if you can find such entry:
Error server.domain.com 1230 Microsoft-Windows-FailoverClustering Cluster resource 'AA_BBBB' (resource type '', DLL 'XXXXX.dll') either crashed or deadlocked.
If so, search for the dll file to see if you can find any detailed information. Sometimes it could belong to a third party application and you can try to uninstall it to see the result. Or if it belong to a Role or Service, you can try to repair/reinstall
it.
And as Tim said, analysis log on TechNet forum is a little difficult as log files are large and almost all log files contain company information. You can try to submit a case to Microsoft for an efficient response.
If you have any feedback on our support, please send to [email protected]

Training and Event Management - report on list of cancelled courses

Hi All,
Is there any standard report available to get the list of cancelled courses (be it business event grp , type or business event) Would appreciate your inputs on this.
Kind regards
Sathya

S_AHR_61016216 - Cancellations per Attendee , i think there is no standard report for cencelation of business events, type and group.
for cancellations per attendee reports is available in the system.
good luck
Devi

How can I see Calendar event END times at a glance?

How can I display my Calendar event titles exactly as I type them? I do not want Calendar to remove duration from the titles of my events. Otherwise I can't see event END times at a glance in month view; only start times. How can I "trick" Calendar to just show my titles as I type them - as I always could before I upgraded. I used to be able to enter "Seminar 9am-5:45" and it would appear that way regardless of how or what I chose to enter (or not enter) for duration.
I am running OSX 10.9.3.

It's a bit weird, but if you type in the time info TWICE into the event title then Calendar uses/deletes one of them to populate the event details and leaves the other.
Apple - Mac OS X - Feedback

Event List view in iCal?

I would love to have an Event List view in iCal like I do on the calendar on my iPhone. Is there such a thing? The particular reason for wanting it (this time) is that one of the calendars in the ON MY MAC list has a number in a oval to the right.
I believe this is trying to tell me that there is a new event that I need to do something about. Problem is, I don't know where to find it.

ecernek,
There is no event list option on iCal like the one on the iPhone.
That number means that you have an event invitation. Use iCal>View>Show Notifications to choose what to do with the notification.

Can I show a color bar instead of a color bullet in iCal Monthly view for all my events in all calendars?

In the Monthly view of iCal the only events that show a color bar in the event is the Birthday Calendar. All other events in all my other calendars only show a color bullet next to the event (unless I click on that event which then shows as a color bar). I would like to know if it is possible for all the calendar events to have a color bar in the monthly view instead of just that tiny color bullet.

Greetings Judith,
Before making any attempts at deleting calendar data, backup what you have just in case:
Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
iCal has an automated function located in iCal > Preferences > Advanced > Delete events "X" days after they have passed. By typing in a value for days you can tell iCal to delete all events before that time frame.
Example:
Today is 4-16-2012.
If I wanted to delete all events prior to 1 year ago (4-16-2011) I would type in "365" for the number of days.
Once you type in the number of days you want kept in iCal, close the preferences and then quit iCal.
Re-open iCal and check to see if the events are gone. If not you may want to leave it open for several minutes and then quit again.
Once the events are removed go back to iCal > Preferences > Advanced > Delete events "X" days after they have passed and make sure the check mark is removed to prevent future deletion.
Hope that helps.

Can you show at a glance which event images are in albums?

Say I had an event containing multiple similar but different images, is there a way to show in the grid view for example which images have already been used in one or more albums?
Would be handy to be able to select a 'show list of albums containing this image'dialogue box. I guess you could hide images you've used but that wouldn't work automatically, nor would any other tagging/rating.
Another approach would be to make albums containing everything in a given event, then move the images out of that album once used, just seems fiddly to me.
AC

AC
Would be handy to be able to select a 'show list of albums containing this image'dialogue box.
Yes it would and many people have suggested tit. Add your voice to the chorus at iPhoto Menu -> Provide Apple Feedback.
A workaround - and it's no better - is to go to an album and select al, then give all those pics a keyword. Then in grid view you can see which pics have the keyword. (View -> Keywords)
Regards
TD

Unable to capture startup and shutdown event of Photoshop in automation Plugin.

Hi,
I am creating an automation plugin and I want to register some events. I have seen listener plugin sample to register event in startup and unregister event in shutdown. I have used same code in my plugin but I am unable to capture the startup nad shutdown event of Photoshop. On clicking the menu item of my plugin the calls come inside the AutoPluginMain but during the startup or shutdown of plugin, the calls does not come inside the AutoPluginMain.
I am unable to detect the cause of the problem. Can someone please giude me??
Thanks in advance.

Hi Tom,
Thanks for the suggestion.
Yes, I am working on Windows. As you suggested, I compiled .rc file but the compile option for .r file was disabled. After compiling the .rc file, I again rebuild the complete project and tested my build. But still I was not able to achive the desired result.
Any other thing that I need to do to make it work?
Thanks

FailoverClustering Event ID 5125

Similar Messages

Maybe you are looking for