FailoverCount is not getting reset for QuorumResource in Windows2012 R2 failover clusters

Hi,
I have two-node failover cluster on windows server 2012 R2 with third
party resource as quorum with typeNode and Disk Majority.
on fault of quorum resource FOC is not failing over "Cluster Group" to other cluster node. Following log lines are seen in cluster log.
Here is cluster log from
fail node.
00008bc.000014d8::2013/12/06-11:45:49.591
INFO [RCM] rcm::RcmGroup::Failover: (Cluster Group)
000008bc.000014d8::2013/12/06-11:45:49.592
WARN [RCM] Not failing over group Cluster Group, failoverCount 2,
failoverThresholdSetting 4294967295, lastFailover 2013/12/06-03:39:54.190
000008bc.000014d8::2013/12/06-11:45:49.592
INFO [RCM] Will retry online from long delay restart of quoDG in 3600000
milliseconds.
Quorum
resource failover policy’s Maximum failover count is set to one.
000008bc.000014d8::2013/12/06-11:45:49.591
INFO [RCM] resource quoDG: failure count: 1, restartAction: 2
persistentState: 1.
Is there a way to reset this FailoverCount ? When does FOC increments and resets this failovercount for a resource ?
Thanks in advance
Rakesh
Rakesh Agrawal

It's actually a failure threshold, not a failover count. You can get more information here on how to modify it.
http://support.microsoft.com/kb/197047
Basically, the clustering software does not want to failover a resource unnecessarily, as that can cause brief outages. So it has a threshold on resource groups. It also has a defined period in which this threshold is measured. So if a
resource group fails multiple times within the defined period, it will simply restart on the current node if the threshold count has not been reached. If the threshold count has been reached during the time period, the resource group will be failed over
to another node.
.:|:.:|:. tim

Similar Messages

Value not getting resetted for Node inside Node

Hi All
I have created the node structure as below
A (Value Node)
|_ID (value attribute)
|_B (Value Node)
    |__Val (Value Attribute for Node B)
Now the code is as follows
for(i = 0 ; i < n ; i++ ){
Ele Aele = createElement
Aele.setID("1")
nodeA.addElement(Aele)
for(j = 0 ; j < n ; j++ ){
    Ele Bele = createElement
     Bele.setVal("Val1")
     nodeB.addElement(Bele)
Now i want for ID - 1 , Val - a,b,c
when sec time loop iterates
ID - 2 , Val - d,e,f
But the problem is that
For ID - 1 , i am getting Val - a,b,c,d,e,f
when sec time loop iterates
ID - 2 , Val - a,b,c,d,e,f
I hope you all can get what my problem is..
Kindly comment and help me out
Regards
Sonal Mangla
Message was edited by:
        Sonal Mangla

Hi ,
There are a lot similar posts in forum.
You can also search help.sap.
Try this link. They have explained creation of similar context structure.
http://help.sap.com/saphelp_nw04/helpdata/en/13/4cde139306304480e89d815ffcf891/frameset.htm
Regards
Bharathwaj

How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

What OS are you running.. this is usually only a problem in Mavericks.
If so I recommend you mount the hard disk manually..
Use Go, Connect to server.
Type in the IP address if static.. eg
AFP://10.0.1.1
Or the name.. but you will have issues unless the name is short, no spaces and pure alphanumeric.. if you are using bad names.. fix it by a full factory reset in airport utility and give it all names that comply to the above.
Type in
AFP://TCname.local Where TCname is replaced with the actual name.
You will be asked for the password the first time which is public unless you changed it.. please remember to save this in the keychain.
Copy files then to a new directory you create on the TC.. do not place files inside the TM sparsebundle. Nor directly under the main directory.

Modem - router getting reset for every 15 mins

My modem and router gets reset for every 15mins and every time I call Comcast not getting proper support . Can someone hear this. This happens every weekend.

freezing at regular intervals:
:http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
: https://addons.mozilla.org/firefox/addon/places-maintenance/
Install add-on, run at least the option mentioned in the article, I ran them all. When finished you can uninstall the extension, all without taking taking Firefox down, The extension is one of the new JetPack extensions.

NOT Getting Values for LOCATION...on MultiProvider REPORT

HI All,
I have a MultiProvider on 4 cubes.All these 4 cubes having object LOCATION. I can see data in all cubes for LOCATION. I am running a report on this MultiProvider.
Problem:
I am not getting Values for LOCATION. Why?
What I did:
I checked all location objects of all 4 cubes @ MultiProvider level .
I didn't use any Infoprovider in Qry designer sections.
Please suggest. What is the reason how to solve..
THanks & Regards.
Sri.
Edited by: siri26 k on Dec 5, 2008 10:41 AM
Edited by: siri26 k on Dec 5, 2008 10:41 AM

hello,
in the identification tab of the MP,make sure you have checked all four checkboxes across the 4 infoproviders.
then in Listcube T-Code, select your MP,display the records based on selection inputs and see if location is populated.
If the data is not coming in listcube, then it will not come in the Query too.
Reg,
Dhanya

Values not getting displayed for members which doesnt have parents

Hi
I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
Is it a bug , we were able to do it in Express ..
Can anybody help us in doing this.??
Thnx in Advance......

Hi,
This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
Hope this helps
BI Beans PM Team
Oracle

RBA GATP check is not getting invoked for Sales Order

Hi Everyone,
RBA GATP check is not getting invoked for Sales order.
I maintained the configuration settings for 'Rules-Based Availability Check', APO general settings (check mode, check instruction), carried out integrated rule maintenance, Rule determination for the combination of order type & product, associated the check mode to product master. Also maintained all the settings in ECC towards Req class, Req type, checking control etc.
However, sales order is not invoking RBA Check though it is showing up the 'Rule' icon in the screen. Also, in the APO Availability check in Sales order when I click onto 'check instruction', I get the checking mode that pertains to RBA for business event 'A' (Sales order). Though I have not maintained any stock for the main material for which I have the sales order, yet system is confirming any quantity that I put in.
I would expect that system would propose the same material in an alternate location where we have stock through RBA.
Request you to share ideas on this.
Regards,
Avijit Dutta

Hi Avijit,
You should used No Checking Horizon in Checking instructions and also Check your rule control settings.
What you have defined in 1st and 2nd steps. Check whether product substitution is carried out or Location Substitution.
Thanks,
Bala.

Header Vendor text is not getting displayed for PO in BBP_PD transaction.

Hi Experts,
We are upgrading SRM 3.0 to SRM 7.0 .In the upgraded sys the Header Text 'HTXT' is not getting displayed for the Purchase order created in BBP_PD. For the SCs the Header text field is populated correctly.
Inputs on this will be very helpful.
Regards,
Ravi.K

Ravi,
Check in IMG if the text schema is used in configuring PO transaction type. Define Transaction Types is the setting.
SG

PF not getting deducted for the mid month joinees.

Hi,
The problem is coming in the PF deduction of the employees who have joined in the mid of the month.
For ex if an employee's basic salary is 7000 and the emp joined in the mid of the month , the system is taking PF from RS 3500 , where PF deduction is not applicable. Now the result is PF is not getting deducted for that month which should not happen.
So kindly guide me how to apply a check in the system so that it deducts the PF of those employees who are joining in the mid of the month and their basic salary is above Rs6500.

check
INPA4
INPA3
INPA2
INPA1
tables V_INPA1 check the configuration once
if u dont want f

Not getting data for 1 field in ODS

Hi BW Experts,
I am loading the data from R/3 to BW.I have loaded the data through PSA.The data is available in New data field. After activating the ODS, for 1 field the data is not uploaded and in the report, the values are not displaying.
I have checked the Transformations also. it is mapped correctly.But still i am not getting data for that field.
Thanks,
Siva.

Thanks for the Update
1. What is your Service Pack Level?
Service Pack is 0016
2. Are you able to see the data in PSA?
   Yes I can see the data in PSA
3. After load, are you able to see the value in New table?
   Yes i can able to see the data in New data table
4. Anywhere, are you doing the SORTING of Data Package?
   No I have not sorted the data Package.I have not written any coding on this
I have not written any coding in transformation also.
Thanks,
Siva.

Proposals are not getting generated for BOM items in MD50

Hi Gurus,
I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
MRP type is PD in both materials.
When i run a MRP thru' MD50 after getting customer order.
it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
Please let me know the solution.
Thanx in advance
Regards,
Nagraj Vasmate

try to use strategy 20

SQLloder scripts not getting generated for CLOBs

I am trying to migrate MYSQL 3.23 database into Oracle 8.1.7 and after creating the Oracle model and after converting the MYSQL text datatype into CLOB of the Oracle model the SQLloader scripts is not getting generated for CLOB datatypes. I mean the scripts are getting created but there is no change in the script for CLOB datatype.
The script generates the following for the table containing CLOB datatypes:
mysqldump -h <HOST> -u <USERNAME> -p<PASSWORD> -T <DESTINATION_PATH> fields-terminated-by="<ec>" lines-terminated-by="<er>" test av_wbt_course
Please let me know how to load data when the datatype is of CLOB ?

I was able to resolve this issue by using OWM Oracle Migration instead of using offline method by sqlloader scripts.

Planned order not getting generated for FG

Dear Experts,
Planned orders not getting generated for the Finished Goods - X which is having MRP Type M0 - MPS fixing type strategy group 20 which is copied fron another FG - Y , its a new product and production plan has been updated through MC88 - Rough cut planning but the planned orders are not getting generated.
And for the material valid production version exists with selection method 3 and individullcollective as 1.
Please let me know what might be the possibalities and what all the key fields i need to check.
Thanks & Regards,
Sampath
Edited by: sampath s on Jul 13, 2011 11:31 AM

Dear,
In general MPS is run for High value items ( if you use like Gold , Platimum or A class items. ).
Always only single level is used for Explosion and planning. then only you can analyse the requirements at each stage before procurement.
Otherwise if you run MPS to multi level, Bottom most high value will be procured without any notice to authorities. Even you may cancel the process in mid way. At that time what will happen to the procured high value material.
So for that purpose only single item single level MPS concept is evolved.
Fo that you run MPS at single level so that only for the first level MPS will be carried out.
Check and revert back.\
Regards,
Alok Tiwari

Downloading artwork - "could not get artwork for some albums"

This might have been addressed before, but I browsed the forum and couldn't find a thread. Sorry if it's been gone over several times.
I live in Turkey and I've added albums to my iTunes. I checked the box in the Get Info next to Artwork and I selected Get Album Artwork from the Advanced tab. It scans through all the albums and then says "could not get artwork for some albums." "Some" albums means all of them actually. And the error tab details say "artwork not available." I also tried getting artwork by right clicking on a single album but I get the same error. Before it was a 609 error. Now it just says not available.
I logged out of the store, quit iTunes, loaded it again, re-signed in to the store and tried to get artwork that way, but got the same result. No artwork. The albums are things like Let It Be, Allman Brothers, Ella Fitzgerald... Albums that should certainly have artwork available.
I'm using Windows Vista.
Has anyone had and conquered this problem? Any ideas on what I should do? I have 300+ albums, so getting the cover art from wikipedia would be a bit tedious. I'd appreciate any help anyone can give!

Hello, Welcome to Apple Discussions.
Are your songs from Audio CDs or iTunes Store? If not you may need to manually find the album artwork for them as these songs may not be listed in the iTunes Store database for your region.
iTunes: Album art may not download properly
http://support.apple.com/kb/TS1815
iTunes will only download album artwork for songs that it can find in the iTunes Store. iTunes will check each song in your iTunes library and attempt to match it up with a song in the iTunes Store. If the data matches, iTunes will download the album artwork from the iTunes Store and add it to the song in your iTunes library. If iTunes does not find a particular song's artwork in the iTunes Store, you will not see an alert message. iTunes simply does not download artwork for that song.

I am part of a family sharing setup. Can I have my own payment method so the organizer does not get charged for my purchases?

I am part of a family sharing setup. Can I have my own payment method so the organizer does not get charged for my purchases? If so, how do I set this up?

Yes. Just redeem gift cards so that your own account always has a sufficient credit balance. Here is how it works:
Family purchases and payments
After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card.

FailoverCount is not getting reset for QuorumResource in Windows2012 R2 failover clusters

Similar Messages

Maybe you are looking for