Fails then starts from scratch!

Hi,
I had TM on my new Mac mini set up to do backups to my HFS+ (non journalled) 500GB external hard drive (internal put into a USB case) and I have another FireWire 'My Book' 750Gb with all of my media, installers etc which is included in the backup to that drive.
For a little while I had a full backup (I excluded Macintosh HD initially then added it after the My Book was backed up). Then one day it tells me it failed to backup while doing things on my mac. So I shrug it off and click Backup Now but then it started from 0mb, and was determined to back up the whole 220GB of data on my drives again!
And obviously it then told me I don't have enough space cause of the two full backups.
It basically failed and then decided it had forgotten about my other 200 gb backup.. Anyone else had this problem? At the moment I have my 500GB backup disc turned off and TM disabled cause I don't trust it to just work.
When I get TIME I might try erasing my backup disc again and start the process from scratch but this is very annoying.

Hello thre3:
This is from the knowledge base:
+Make sure the backup disk is compatible+
+You can use Time Machine with FireWire disks and USB disks. The disk used for backing up must be in the Mac OS Extended (Journaled) format, and must have Access Control Lists (ACLs) enabled.+
+Permissions must be set so that you are allowed to use the disk, and the disk can’t be read-only.+
It appears, from your post, that the formatting is not correct.
Barry

Similar Messages

Can't get iMessage, totally deleted everything on iPad mini and then started from scratch but still can't get iMessage

On iPad mini, and year ago my iMessage stopped working ! Took it to the store n they reset everything on it! Still couldn't get iMessage to work.
Just decided to leave it because thought I can deal with email n Skype.... Now I need iMessage so just deleted everything n re booted iPad!. Reset everything. Still can't get iMessage and iCloud!!! I'm not too bad cuz I can sync with hubby's iMac. But know I won't have iMessage.

Hello ruby10t,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Messages issues:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Before you start troubleshooting, learn the difference between SMS, MMS, and iMessage. The first step to resolving an issue with iMessage is toupdate your iOS software and your carrier settings to the latest versions. If iMessage still has an issue, follow the steps below for your issue.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD
Re: I accidently turned off my imessages and now they keep messing up and wont send imessages

When pausing download or download fails re-download starts from scratch

I would have thought a major upgrade like itunes had lately would have solved this problem already.
podcast that was stopped due to error or was paused voluntarily -
when trying to re-start the download, all that was downloaded already is lost!!!!!
even if it reached 80% or more, the download starts from scratch!!!!
please correct this, this is incredibly annoying!!!!!!

thanks, I sent them "feedback" about it as you suggested.
But I would have thought this is not the first time someone encounters this basic problem!
Maybe someone here can tell me it is known, and it is being worked on or something?
Thanks again

Start from scratch-reload OS

I have a 3 year old MBP (2.53 Ghz intel core 2 duo, 4gb 1067 Mhz DDr3, running 10.7.3). I have noticed it has gotten sloooow. I upgraded to Lion when it came out last year, and actually thoought Lion was faster than Snow Leopard. Performance has gotten slower over the last few months. The MBP shipped to me had Leopard loaded. Apple sent me the Snow Leopard disks, so I upgraded to SL. When Lion came out, I upgraded to Lion over the internet.
My thinking, is that if I wipe everything on the HD clean, reload the OS, then selectively load only the apps I really need (vs. the ones that have accumulated over the last three years) I should see a perfromance boost.
Maybe I'm wrong, but would appreciate the counsel of the experts on this board.
Also, since I do not have Lion Disks, if I start from scratch, would I reload SL, then grab the Lion upgrade from the apps store? If there is a document in the knowledge base that I could use to assist in this effort, that would be very helpful.
Also looking into replacing my HD with an SSD, if all else fails.
Thanks all.

Not sure what is suspect or what is not, but here is everything that is running after I rebooted:
442
cookied
davidnonnemacher
0.0
2
1.4 MB
Intel (64 bit)
249
Finder
davidnonnemacher
0.0
5
36.8 MB
Intel (64 bit)
439
Activity Monitor
davidnonnemacher
1.6
2
24.4 MB
Intel (64 bit)
248
SystemUIServer
davidnonnemacher
0.0
2
21.8 MB
Intel (64 bit)
247
talagent
davidnonnemacher
0.0
2
15.9 MB
Intel (64 bit)
246
Dock
davidnonnemacher
0.0
3
32.5 MB
Intel (64 bit)
245
pboard
davidnonnemacher
0.0
1
932 KB
Intel (64 bit)
241
UserEventAgent
davidnonnemacher
0.0
3
8.2 MB
Intel (64 bit)
302
Mail
davidnonnemacher
0.6
12
94.9 MB
Intel (64 bit)
428
mdworker
davidnonnemacher
0.0
3
26.0 MB
Intel (64 bit)
235
distnoted
davidnonnemacher
0.0
2
2.4 MB
Intel (64 bit)
296
AppleSpell.service
davidnonnemacher
0.0
2
11.4 MB
Intel (64 bit)
227
launchd
davidnonnemacher
0.0
2
1.3 MB
Intel (64 bit)
290
Folder Actions Dispatcher
davidnonnemacher
0.0
2
6.4 MB
Intel (64 bit)
289
AirPort Base Station Agent
davidnonnemacher
0.0
4
2.0 MB
Intel (64 bit)
281
warmd_agent
davidnonnemacher
0.0
2
1.7 MB
Intel (64 bit)
280
PhotoStreamAgent
davidnonnemacher
0.0
3
13.8 MB
Intel (64 bit)
272
imagent
davidnonnemacher
0.0
6
8.5 MB
Intel (64 bit)
265
com.apple.dock.extra
davidnonnemacher
0.0
3
17.5 MB
Intel (64 bit)
266
storeagent
davidnonnemacher
0.0
3
6.4 MB
Intel (64 bit)
70
loginwindow
davidnonnemacher
0.0
2
20.3 MB
Intel (64 bit)
258
fontd
davidnonnemacher
0.0
3
4.1 MB
Intel (64 bit)
445
Safari
davidnonnemacher
0.0
6
35.3 MB
Intel
452
CVMCompiler
davidnonnemacher
0.0
1
1.6 MB
Intel
446
Safari Web Content
davidnonnemacher
0.5
9
104.1 MB
Intel

Starting from scratch question

I have both Carbon Copy and Time Machine backups. I have a question, I want to do a clean start, is it possible to reformat my drive, put in my operating system 10.6.2 from disc and then pull what I want from either back up program. Will it bring over anything from my old operating system? I live in Mexico and was told by a tech at our local Mac place (they fix macs, not an authorized dealer) that because of the slow starting and system hangups I should start from scratch. My original office and other program discs are in the U.S. and I won't be able to get them for awhile. They are all original programs that I own and have them backed up on an external. I just don't want to go through inputing a new operating system and then migrating anything that is causing the hangups back. Thanks for the help.

Before you do anything, you might want to run SMART Utility, just to be sure that your hard drive isn't starting to fail and causing all these problems:
http://www.apple.com/downloads/macosx/systemdiskutilities/smartutility.html
You can download the demo and run it several times for free. SMART Utility is somewhat more critical than Disk Utility, and may find impending hard drive failure sooner. If your drive is headed south, then you would want to replace it.
I'm not all that familiar with CCC since I use Super Duper to clone, so I don't know what would be involved in restoring from a CC clone. However, I recently replaced my hard drive, and restored from a Time Machine backup, and that seemed to work well. I had to update the OS, so I feel that I had a completely fresh copy of it.
Hope this helps!

Starting From Scratch -- How Complicated is This Going To Be?

I am starting from scratch with iChat (and with any video chatting for that matter).
By next week I have to either figure it out and make a video call or find a local set up I can use or fly ot the meeting which I'd really rather not do!
Looking at this forum I see lots of people with problems sharing huge complex error messages. These errors make me wonder if getting going will be too complicated.
What do I need to do? Are there resources / hints / tips / traps / ... people can suggest?
I have a G5 iMac without the built in camera but we do have an old cheap logitech webcam (or I could buy a better camera if needed). And I guess the iMac has a built in mic.
I'm running Tiger 10.4.11 and I believe my iChat is version 3.1.9
My internet connection is a high speed DSL
The call I have to make will just be between two points -- if I'm set up with iChat what do they need to do on their end. They have a professional set up.
At our end we would be three people -- will it be silly the three of us huddled around one computer?
With my first quick look it seems that one either needs to be a .mac or an AOL member -- is that right or are there other options?
If I'm starting from scratch is it worth the trouble to use iChat? Is this the excuse to upgrade to Leopard? Or should I forget iChat and try Skype?
Bla Bla Bla I can go on but I think you get the drift.
Can I do this? Will it work? What is critical? Should I bother?
Thanks
James

Hi,
Start at Ryan's Pages
My Version
The Built-in camera an Mic work.
It is better if the background is uncomplicated and that you are better lit from the front than the Background is (Setting the Screen to something light can also help with this)
You System Preferences > Quicktime > Streaming is almost certainly going to need to be changed to 1.5Mpbs.
If you change this whilst iChat is Open Restart iChat to see the new speed.
Depending on your modem and any router you have they may need to have ports opened as iChat uses ports above the ones that are open by default (And allow Web Browsers and Mail to work) much like an On-line Game.
There are test accounts and real people willing to test with
iChat can Video chat to other iChat users whether they have a camera or not.
Some people can have success with Video Chats to AIM on a PC.
Names
You can use the AIM Buddy list with either a AIM or @mac name
There is also a Jabber List which you can use a Jabber ID or a GoogleMail/Google Talk ID with
If you are connecting to PCs then Looking into MeBeam is a better option at present.
Uses a Web Browser and Flash to allow use of your Camera and Mic.
As far as the number of people around one camera goes it may pay to use two or more cameras as this creates a Drop down in iChat in the Preferences > Video section where one person could switch between the cameras.
Alternatively if this is iChat to iChat then up to 4 computers could be connected in the chat (providing you have the Bandwidth at one end of the connection as it will count and 4 chats)
The Critical bit is understanding your LAN
iChat does not like it when it can see two or more Subnets (or Parallels or being wired and wireless at the same time)
A Company LAN is not likely to use two DHCP servers but it is a common mistake on home LANs as web browsing and Mail still work due to the way the ports are opened.
The Logs you see posted are seen in the Pop up at the time of a failed chat if you open it and they are stored in You Home Folder/Library/Logs/iChatConnectionErrors
They can be somewhat interpreted and point you in the right direction at times.
On the whole people keep posting all of the log but the bit below where it says +Binary Images+ is rarely useful and does not need to be posted.
I hope this helps.
Summary.
Get name.
Test to Test accounts.
Test with real people
Post back any info and about Modem, Router and LAN set up.
+NOTE. With Tiger/iChat 3 you may possibly have issues with an ISP blocking port 5060 for use with their Own VoIP service+
Ask again.
I may receive some form of compensation, financial or otherwise, from my link to my website.
10:06 PM Friday; March 28, 2008

How To "Start From Scratch" and Build a Clean iTunes Library on a Portable USB External Drive?

A while ago I posted about my confused (and confusing) mess of an iTunes:
https://discussions.apple.com/message/16183210#16183210
While dozens looked I guess eveyone agreed with me "what a mess" and moved on.
So ... someone at the Apple Store suggested that what I should do is start from scratch. But I'm not sure if I understand all the steps. He said I should:
* create a folder of all my songs and just the song files not all the other iTunes stuff -- copy all the mp3 and m4a files that I have in Music > iTunes > iTunes Music > Music to a temp folder let's call it "all my music"
* launch iTunes and tell it to move to / always look at / whatever the terms my new portable external USB drive
* click on file / add to library and tell iTunes I want to add that "all my music" folder to iTunes
At this point I don't care if we lose playlists, artwork, play counts and all that stuff.
Does this approach make sense?
Is there another way?
So how do I tell iTunes to only look to the external? How do I get rid of the old stuff I have on the internal that is offering duplicates and phantom entries? Do I need to delete iTunes and then download a new copy? Should I delete the iTunes foilder? ...?
Any advice would be much appreciated.
Many thanks!

jayessemm wrote:
So how do I tell iTunes to only look to the external? How do I get rid of the old stuff I have on the internal that is offering duplicates and phantom entries? Do I need to delete iTunes and then download a new copy? Should I delete the iTunes foilder? ...?
the simplest and working way.
go to iTunes -> Preferences -> Advanced
On there change the iTunes Media Folder location to your external hard drive
Check that the rest of the preference pane looks similar to the following picture.
After doing so, on menu bar go to File -> Library -> Organize Library
This will force iTunes to copy all songs and playlist's to the new place and to build up a new database for the Library.
Empty or corrupted files will left behind on the old location.
After checking that all is on place and working at the new location, you may delete all files at the former location.
Done
Cheers - Lupunus

I just bought a new Macbook Pro and transferred my iTunes archive of music to it. How do I transfer the playlists from my other computer(s)? iTunes on the new machine wants to start from scratch.

How do I transfer playlists from my other Apple computer(s) to my new Macbook Pro? I think I have successfully moved the music (archive) but the new machine wants to start from scratch on the playlists.

http://support.apple.com/kb/ht1751
Essentially you need to copy over the itunes folder
username/Music/itunes
Over to your macbookpro I suggest using an ethernet cable as it is way quicker. Put it in the same spot on the new Macbook Pro
username/music/
This should bring over the playlists etc. Then just put the music back in from the archive

ICal: how can I start from scratch?

I'm having recurring and persistent problems with iCal since I bought a new Mac Pro and migrated my user files from my previous computer (G5, which was also running Leopard).
At first, alarms weren't working. I read several threads here and went through a lot of troubleshooting and finally got that working again.
However, iCal is still very slow and buggy. For example, when I create a new to-do and click on the "due date" checkbox, it takes about 10 seconds for the check to appear. The spinning beachball is a frequent sight, and everything from creating new events to setting due dates and calendars takes five times longer than it used to when I was using iCal in Tiger.
I created a backup of my iCal file, and manually exported my calendars for extra protection. Then I used AppZapper to completely uninstall iCal and all related files, and I used Pacifist and the OS X DVDs to reinstall iCal. Then I imported each calendar individually.
This didn't work. iCal is still so unresponsive it's almost unusable. If there were another alternative out there that worked with my iPhone and other applications that sync with iCal, I'd be using it. But because I depend on those other apps I'm stuck with iCal, and I need to make it work.
Is it possible that one of my calendars is corrupted and causing problems? What else can I do to find out where the problem lies?

Harlan83,
to start from scratch, you’ll need the pair of model-specific grey installation DVDs which originally came in the box with your MacBook Pro. You can purchase a replacement pair of DVDs for your model MacBook Pro from either Apple or iFixit.

How can I reset/refresh Mail and start from scratch in Lion?

Just completed the upgrade to Lion last night. On Snow Leopard I had been using Thunderbird as my mail client, but I'm interested in seeing what the upgrades in Mail look like and will do. Before Thunderbird I did use Mail, so opening the app brought up all my old settings, smart boxes, etc. I want to start from scratch as though I had never used Mail before - how can I reset it to "zero"? Can I, or do I need to just manually delete the accounts, folders, boxes, etc. and then re-add them?
Thanks for the help and advice.

Ok, answering my own question. I found this article: http://www.christian-kalmar.com/fixing-a-broken-face-detection/
Rebuilding faces database now. Hopefully it works properly.

I've lost iWeb and thus my web design. I must start from scratch. Should I reinstall iWeb 09 and use that, or is there a better way?

I've lost iWeb and thus my web design. I must start from scratch. Should I reinstall iWeb 09 and use that, or is there a better way?

The file you really need is named Domain.sites2 which resides in your Home/Library/Application Support/iWeb foldler. It's independent from the iWeb application. If it's not in there do you have a backup of your hard drive from an earlier time?
Resinatll iWeb 3 from the iLife 09 disk or wherever you got it from originally and then try what's described below:
In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

How to start from scratch?

My G40 2388 is running slow although I have increased the memory. I spoke to a computer sales person who did not try to sell me a new laptop but said that it could help to make backup of all documents etc and then reinstall everything and start from scratch. Anyone has experience with that? Will it help? and how do I go about doing it? For instance how to I go back to the initial config. I do not have CDs because the laptop came with Win XP Pro installed from the manufacturer. I just want more speed and more space so I am open to other suggestions.
Thanks a lot.

The "funny" thing (I spend most of a day figuring it out but still have figured it out so "funny" is not the right word) is that the G40 recognizes other USB sticks, but also that one USB stick works on other laptops so it seems to be that stick with this mashine that is the issue. I thought it could be the driver but when I try to update the driver it tells me that I have the most recent driver - albeit that it is dated 31 January 2001.
The problem is that I do not see the drive (F) and when I click on E (the USB is partioned) then I see E and F and then I click on F the mashine gives me this message: This operation has been cancelled due to restrictions on this computer. I have no idea which rstrictions it could be. I am logged in as administrator (only user). I have tried to restart.
I really find it strange. Maybe I should delete the driver and see what happens?
Regarding the restore point: When I look in add / remove programmes, I see several older upgrades of XP and I thought: Maybe if I remove those because I do have the SP3... but maybe that is the same as removing restore points??
TS files. They are in a folder I have made.. New folder2. It must have been a programme I installed, I just don't know which.. Some file names are: VTS_01_1.VOB (this one files is 1G alone..) and there are several of those.. do you have any idea what these files are for?
I hope I can get these problems solved...then I can move on with more productive matters

SSAUDIT .alg and .atx files are out of synch. How do I start from scratch ?

After upgrading Hyperion Planning from 11.1.1.3 to 11.1.2.1, the .alg and .atx files that are generated when SS Audit is enabled are now out of synch. How do I start from scratch again ? Stated differently, the row numbers in the .alg file no longer correspond to the .atx rows. How do I "reset" these files so they start again in row 1 ?
I know this must have happned to someone else so I thought a solution could be easily googled and found. I can't find it anywhere.

Stop the application and delete the files. If you want to just keep the changes from the last backup, change in the essbase.cfg SSAudit to SSauditR and then when you do an endArchive it will delete the files and start over

Delete 0IC_C03 to start from scratch

Hello all,
I want to start again with the install of the Business Content, do anyone know how to clean up SAP BW from Business Content Install?
For your help thanks in advance.
Cheers,
Alejandro Donis

Hi,
You want to clean just 0ic_c03 or whole bw?
if you want just restart form scratch of cube 0ic_c03 only then you can delete data from cube as stated by by phani.
Later you can delete connected dtp,transformations and info package.
later you can delete info cube and data source.
After that you can start from scratch.
mean install cube 0ic_c03, data source,info pack,transformations and dtp(which are related to your cube).
Thanks

Need to start from scratch, but how?

lost my old iphone 3gs, got my new iphone 4g today. i followed advice and tried to restore from the last backup of the iphone 3gs but it didn't work, i get a crash during the firmware update and then it goe into restore mode, and tries again, and crashes again...
how do i tell it to wipe and start from scratch, because when i plug it in it says its detected an iphone in restore mode so it tries to restore it - presumably using the 3gs settings which dont work..
help?!

no everyone, i just found the answer.. so if you are looking for the same thing it is nothing to do with rusty usb cables etc.
thanks to gavinthain, who posted the following to me earlier, i've followed it and it worked;
Download RecBoot 1.0.2
I found it here: http://www.sebby.net/659-released-recboot-1-0-2/
Plug in your iPhone.
Close iTunes.
Run "RecBoot Exit Only"
Click the "Exit Recovery Mode" button.
The screen on the iPhone will go black. At this point, UNPLUG the iPhone (before it starts back up)
It will boot up correctly after finishing the firmware install.
Now plug your iPhone back in and complete a normal restore.

Fails then starts from scratch!

Similar Messages

Maybe you are looking for