Failure actions ignored on imported question pool questions

If I import a question pool, the settings for a failed answer still reflect those of the original pool except that the Back button is enabled. When I preview the project after inserting random questions from this pool, the number of attempts allowed on the questions is always 1, regardless of how many attempts I allow, even if set to Infinite.
On the other hand, if I create the questions within the project, either in a pool or just a question slide, they function as they should.
Has anyone else encountered this?

Actually, it doesn't work, but thanks for the suggestion. Adobe Support has been able to confirm that importing pools in Captivate 4 causes this behavior; something that worked in version 3 but not in 4. The ONLY way we have found around this so far is to create the question pool within the project it is intended for, which unfortunately means a lot of work for us 6 days before launch. If I receive word of a workaround from Adobe, I'll post the info here.
One other note regarding importing of questions in Captivate 4, if you had disabled the Back button in the pool, it will be re-enabled after your import.

Similar Messages

Important Questions to ask when developing in Workflow

Hello All,
I have two questions.
I am not a Workflow developer, but I've been asked to find out information about creating a Workflow process.
Here is what <b>I</b> need to know: What are important questions to ask the end-user when creating a workflow. What needs to be taken into consideration?
Here is an example of the kind of thing we need to do:
Send an email on a weekly basis to different Project Managers a Summary of Project Charges = (maybe CN41?)
Each Project Manager will have different requirements, so I guess one question will be: "What info do you want from this report?". What else do I need to know?
My second question is this: I should be able to output this as an Excel, correct? How much can I customize this? I haven't done much SAP -> Excel work. Only when I go to System -> List -> Save -> Local File ->Spreadsheet.
Thanks for the help.
Don Fields

Hello Don!
WF is quite a complex topic and someone could write a book to answer your questions - actually there is already a good book available -> check: Practical Workflow for SAP
http://www.sap-press.com/product.cfm?account=&product=H950
Looking at your example their might not even be a need for a workflow but rather a job that runs periodically to send the required information via email to project managers.
Workflow is mostly used if user actions are required e.g. confirm, approve, reject a request or notifications need to be sent to someone after an event or user action occured.
Check this link for getting more information on how to download data to excel:
http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
Harald

c:import question

I tried with <c:import> to import a struts action,it raises a question,I use Tomcat6,my directory is follows:
C:\tomcat\webapps\struts2-blank-2.0.8
when I use visit
http://localhost:8080/struts2-blank-2.0.8/a.jsp
it raise following error:
The requested resource (/struts2-blank-2.0.8/example/HelloWorld.action) is not available
But when I use http://localhost:8080/struts2-blank-2.0.8/example/HelloWorld.action, it can runs well.
My a.jsp file is follows:
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
<html>
<c:import url="/example/HelloWorld.action"/>
</html>If I use absolute path,it can runs well,like follows:
<c:import url="http://localhost:8080/struts2-blank-2.0.8/example/HelloWorld.action"/>
I only want to use relative path,not absolute path,I don't know why raise above error,and how to correct it ?
Thanks

the c:param tag are added to the url and are not set as request parameter.
<c:import url="target.jsp">
<c:param var="test" value="val">
</c:import>then is will do an import like
<c:import url="target.jsp?test=val"/>

Setting a Conditional Action for Pre-Test questions: Skipping Content Slides

OK boys and girls, let's see if this is even possible within one course SCO, or if this a multi-SCO solution (which means I'm toast, because we don't have the multi-SCO aggregator)?
I want to set up a prescriptive pre-test. In my ideal world, answers to each individual question would either enable or disable the content slides connected to the question. If the user passes the pre-test, they could opt to skip the prescriptive stuff and complete the course. If the user fails the pretest, they would have to view the enabled content.
Is this even possible in a single SCO world?
Justenuf

Jim belongs in that pantheon of good guys as well, so many here have pointed me in the right direction and helped me move forward with the capabilities of this software. And, in that spirit - here's my work around for the pretest/post test in a SCORM 1.2 environment:
Created an entrance slide that allows opting totake the pretest or not - but only allows you to take it once.
Created one test (take off the question x of x widget) split it and slide the content in between it. In this case, 10 questions with 5 in each set.
Titled the first set of questions as a PreTest and the second set as a Post Test.
Set my passing score at 4 correct. (the user only needs to get 4 out 5 on either set correct to pass - and I'm setting up an action that only allows the user to see the questions they missed if they fail the pretest.)
Created variables for each "pretest" question and set them at 0. Created on Enter advanced actions on each slide following a question that toggled the variable to 1 if the question was answered correctly if "CpQuizInfoLastSlidepointScored is equal to 1" then "Assign Question<x> with 1"
Created an On Enter advanced action for each content area slide "Skip #" that allowed prescription:
"If Question # is equal to 1 or cpQuizInfoPassFail is equal to 1, then Go to Next Slide"
Only the content connected to the missed questions in the pretest is seen.
Copied the same On Enter advanced action the Post test questions and renamed it "SkipPost #" that allowed prescription:
"If Question # is equal to 1 or cpQuizInfoPassFail is equal to 1, then Go to Next Slide"
Only the questions related to the reviewed content are seen
The sum total of these activities is the following -
The user can choose to take the pretest and complete the course by gettiong 4 or 5 questions correct and jump to the exit page.
     If the user takes the pretest and scores lower than 80%, the content for the missed questions is viewed and the user must answer the questions regarding
     that content. The user passes the course when he/she answers the fourth question correctly.
The user can choose to view the content, take the post test and pass the course by answering 4 of 5 correctly.
it's running right in preview, in web browser preview and on my LMS previewer, with one navigation error.
      the error: after failing the pretest, taking the prescribed content and anse wering the questions correctly, the course occasionally jumps to the results page
     and s displays a failure message, then freezes in place. it does NOT happen each time, which is why I am cy urrently scurrying back to my happy place to dwell
     on this mystery awhile.
Justenuf

How to import questions into Captivate 4 from a delimited file

I'm looking
a way to import questions from a delimited text file (or excel spreadsheet)
into captivate.
All the questions are simple multiple choice, single answer, four selections per question.
I have hundreds - I'd hate to have to retype them all in one at a time.
Thanks in advance
-Joan

Does anyone know if this is a feature in Captivate 5.
Other things I would really like to see in Captivate 5.
Importing and Exporting the graded quiz/test content out of captivate into another
application/ form. Such as xml, tab delimited, excel spreadsheet,
Adobe pdf, Word document or another format. Our current content
developement systems allows us to (when publishing) do this.
1> exclude questions from the Published content
(exclude section questions, or final test content)
2> produce different test versions from question banks
3> Produce a PDF paper test for when we want to train in a classroom setting
4> Select which questions we want to produce
5> Import questions from a pre-defined format. To note: when we do this the system also makes us define a unique interaction id so that the import will update existing questions.
I know this will NOT work for some of the more sophisticated questions, But for the simple Mulitple choice, true/false, fill in the blank. etc..
THIS WOULD BE A GREAT FEATURE..
It would also be NICE TO HAVE THE abiliy to PROFILE versions of the SAME Course WITH OUT REPRODUCING / DUPLICATING / REPEATING THE ENTIRE COURSE PRESENTATION.
Such as
"INSTRUCTOR TAUGHT TRAINING"
"WEB TRAINING"
"PAPER TEST A"
"PAPER TEST B"
ETC...
LASTLY: if we can not export the QUIZ content. Can an excel spreadsheet LIKE INTERFACE be used to edit certain aspects of the questions.
Such as the InteractionId which is sent to the LMS ('cmi.interactions.0.id'). My developer team says it is real difficult and time consuming
to track down interactionIds and then maintain them in a perfect way.
Thanks,
Doug Lubey of Louisiana
www.douglubey.com

MEGA180 Important Questions

I have my MEGA180 on order but I already have some important questions:
1) This unit provides dual vga outputs. If I install my own AGP 8x card, will the VGA2 output still work? I read in the manual that installing an AGP card will disable VGA1 (default) but it doesn't say anything about the 2nd VGA output connector. I require 2 outputs since I will be connecting to an LCD and my HDTV monitor (using a VGA to Component Video Transcoder)
2) Will there be performance hits by using the two vga outputs at the same time?
3) The on-board video card doesn't have any video memory. It will use your existing DDR memory. I will have 512Meg Dual Channel Memory. What kind of performance I can expect from the built-in video card (NVidia NForce Crush18) compared to other AGP cards on the market?
Thanks for your help!
Sly

Though I can not provide you with answers specific to the Mega 180, I can give you some more info.
1) No. As soon as you install an AGP card, the onboard video will be fully disabled from within the BIOS. This is an nForce2 chipset setting. So make sure to get an AGP card with 2xVGA (as most cards have nowadays).
2) No or not much. Using an nForce2 MoBo myself I haven't encountered performance loss using both VGA outputs.
3) There's no way to compare the onboard video to an AGP card. AGP cards will have a far out better perfomance then the onboard video. But compared to other onboard video solutions around, like Xtreme Graphics, the nForce solution is far better and has far better performance.
It all depends on what you will be doing with the MegaPC. If you're a gamer, get an AGP card. If you want to use it as an HTPC, keep with the onboard nForce2 solution. There's no need for extra here since the nForce2 chipset is great. Onboard sound from this chipset is also great. Try it out before spending $ on an AGP card you don't need.
Hope this helped a bit.
roma

E-Recruiting important questions

I'm implementing the E-Recruiting and I have two important questions for this Project:
1 - The business want to capture mobility (willingness to relocate / travel) at the time of position application. Is there a standard field for store this information?
2 - Recruitment would like to be informed about a critical process, in others words, the requisition doesnu2019t compete with other priorities. How can I handle this situation?
Thanks in advance!!!
Sivani

Hi Sivani,
Questionnaire answers are stored in IT5141. They are visible to the Recruiters when viewing the Candidates and can be used in rankings. You can also decide for which positions this questionnaire would be required and which not.
Do not see a standard field to create a priority when creating a Requisition. We added many fields, such as "eligibility for employee referral", so it can be added. However, letting managers set the priorities could be a problem with each manager thinking his/her opening is most important.
Paul

Server Specs for a 11.1.1.3 Install Important questions.

I've put together some specifications for a Development Server & Production Server, any comments appreciated. I hope this post acts as a good reference sample for anybody else out there looking to implement a Hyperion Planning.
Client Tier: (2 developers)
Windows
8 GB RAM
Dual Core Processor
Components: EAS client, Smart View, Excel Add-in
Web Tier:
HTTP Web and J2EE Servers:
Windows + (not sure which version would be best here, any ideas appreciated)+
Processor: 4 x 3 GHZ, 64 bit
RAM: 8GB
Hard Drive: 32 GB
Components: Foundation: HSS, Workspace, Planning, Web Applications: EAS, Financial Reporting, Web Analysis, Planning,
Services Tier:
Server1:
Windows (2003 SP1, R2)
Processor: 4 x 3 GHZ 64 bit
RAM: 16 GB
Disk: 32GB
Components: Essbase Server 64 bit
Server2:
Windows (2003, SP1 R2)
Processor: 2 x3 Ghz
RAM: 8GB
Hard Drive: 32GB
Components: Reporting & analysis, Financial Reporting Print Services, ODI
Server 3:
Windows (2003, SP1 R2)
Processor: 2 x3 Ghz 64 bit
RAM: 8GB
Hard Drive: 32GB
Components: FDM
Database Tier:
4 x 3 GHZ - 8 GB RAM
DISK: 100GB RDBMS
200GB Essbase Storage
The specifications will be similar for the production for abotu 25 - 30 users (10 concurrent), with RAM being a little bumped up.
One important question: I might need guidance on installing 32 bit planning or FDM on the 64 bit server - any known issues with this? Also any known issues with 64 bit Essbase working with 32 bit Planning?
Edited by: EssbaseApprentice on Sep 30, 2010 10:04 AM

obviously its hard to comment on whether it is the perfect spec for your environment, it looks alright to me, it is not under spec.
For the web tier as you are running reporting and analysis and the other machines are windows based personally I would stick with windows 2003.
Is there any reason why you have one machine dedicated just to FDM, seems a bit of an overkill just for one product, it may be worth combining services server 2 with FDM, just a suggestion though
John
http://john-goodwin.blogspot.com/

Adobe Captivate Help | Import questions from GIFT format files (Cp 7)

This question was posted in response to the following article: http://helpx.adobe.com/captivate/using/import-questions-gift-format-files.html

Hi there,
Captivate 7 doesn't support tags during GIFT import. So you won’t be able to import Images, links etc. as part of GIFT Import.
Thanks,
Nimmy Sukumaran.

Hi sorry but i have an important question?i have an iphone 4 and i want connect his to i tunes in a second pc because the pc i connect before is broke..how can i do?without lost my photo number or music?

hi sorry but i have an important question?i have an iphone 4 and i want connect his to i tunes in a second pc because the pc i connect before is broke..how can i do?without lost my photo number or music?

check out this post by Zevoneer.

3 important questions about SAP HANA

Hello Community!
I have got 3 important questions about SAP HANA.
1.
- Our Company has all up about 150 SAP - Systems.
- 12 Systems are ERP-Systems.
=> We consider about SAP HANA at the moment.
=> Is it possible to put all the 12 ERP-Systems in ONE SAP HANA or do I need one seperate HANA for each ERP-System?
=> If it is possible, can you tell me the disadvantages when I use 1 HANA for the 12 ERP-Systems.
=> Is there a Storage-Limit in the HANA (I think no, because of 64 bit).
=> Can I still make realtime-analytics with 1 HANA for 12 SAP Systems?
2.
=> Can I run ONE HANA with different non-SAP-Systems?
3.
=> Is there a Demo-Center from SAP or IBM, where I can test and see the HANA before I buy it?
(I do not mean the Fujitsu TDS Demo Center)
It would be nice, when you would answer all my questions.
Thank you.

I have got 3 important questions about SAP HANA.
1.
- Our Company has all up about 150 SAP - Systems.
- 12 Systems are ERP-Systems.
=> We consider about SAP HANA at the moment.
=> Is it possible to put all the 12 ERP-Systems in ONE SAP HANA or do I need one seperate HANA for each ERP-System? Yes it is quite possible to put all the ERP/CRM/SCM or other components on one HANA. You need to check for pricing/users/RAM (storage)
=> If it is possible, can you tell me the disadvantages when I use 1 HANA for the 12 ERP-Systems.
There are no disadvantages as of now.. improve existing planning, forecasting, pricing
optimization and other processes
=> Is there a Storage-Limit in the HANA (I think no, because of 64 bit).
There is no limit on Stotrage: You need check how much Data you need on RAM (Real time processing) Storage.Minimum you can buy is 64 GB and multiple of it for (RAM)
=> Can I still make realtime-analytics with 1 HANA for 12 SAP Systems?
Yes certainly..
2.
=> Can I run ONE HANA with different non-SAP-Systems?
YEs you can run HANA for 3rd party S/W or non-sap systems for your real time anlytics.
It has ODBC and JDBC both and you can combine it with other systems.
3.
=> Is there a Demo-Center from SAP or IBM, where I can test and see the HANA before I buy it?
(I do not mean the Fujitsu TDS Demo Center)
This you need to check with your local SAP Service channel..
It would be nice, when you would answer all my questions.
Thank you.
PY

SUPER IMPORTANT QUESTION (really!!) Zen Mi

<SPAN>PACKAGE CONTENTS
Zen Micro Player</LI>
Rechargeable Li-Ion Battery </LI>
High Fidelity Earphones</LI>
USB 2.0 Cable</LI>
Creative Media Source</LI>
Installation CD</LI>
Quick Start Guide</LI>
Limited edition Zen Micro 5GB comes bundled with these additional accessories*:
Power Adaptor</LI>
Belt Clip & Stand</LI>
Pouch</LI>
*While Stocks Last
I Thought all ZM5GB came with the belt clip/stand/pouch...so only if u buy on line u get it's?

A "super important question" would be something like, "is there a god?" or "what are my chances of surviving this operation?" or, maybe, "my Zen Micro is showing a message saying 'will self-destruct in fi've minutes unless technician code is entered' -- does anyone know the technician code?" (no, no one has ever asked that question).
Yours doesn't qualify.
The answer is that, at the moment, all 5gb Micros as far as I know come with these accessories, all 4gb and 6gb don't, but READ THE PACKAGE CONTENTS before buying to make sure.Message Edited by tganani on 04-09-2005 05:59 PM

A very important question for every After Effects user

a very important question for every After Effects user, from product manager Steve Forde:
http://adobe.ly/1exI6tI

Tom Daigon Great idea everybody! Encourage Adobe to do ONLY ONE THING with AE for 2014. Since theres not a heck of a lot of development that can be done on the present foundation, they can really stretch the rental scheme out for many years.And once you get used to the concept, every year they will do ONE THING to placate you. So now they have you swallowing no "ownership" of software and limited development.

HT4972 hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it for example i have a ipad 1st and i dont know whats is the latest version of ios for this device thanks

hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it. for example i have a ipad 1st and i dont know whats is the latest version of ios for this device

Google "iOS versions" and read the first match (Wikipedia)........

Resource Pool Heartbeat Failure from All Management Server Resource Pool Watcher

Hi,
In my environment, I add another SCOM 2012 R2 to existing management group. (old SCOM is 2012 R2 ->SCOM1)
We have one SMS provider in SCOM1, after added SCOM2 in the Event Viewer we have Event ID
21400. I googled and in the Administration tab for Notification Pool and AD Assignment Pool change the member ship form Automatic to Manual and remove SCOM2 from those, finally Error 21400 is resolved. But every hours in the active alerts shows
Resource Pool Heartbeat Failure from All Management Server Resource Pool Watcher.
Another problem is :
in the active alerts select a critical or warning or information in the Alert Details shows in just SCOM2:
This Page can’t be displayed
Make sure the web address is correct.
Look for the page with your search engine.
Refresh the page in a few minutes.
thanks

Hi,
Based on my research, when management
server running windows server 2008 operating system, we may experience Random
Resource Pool
Heartbeat Failures.
Did you add a new management server with windows
server 2012 O.S?
Please also try to restart operation manager services related and check the result.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Failure actions ignored on imported question pool questions

Similar Messages

Maybe you are looking for