Failure id 90DX6C-56S5S1-9XL03f-60S403 - A disk read error occurred. Press Ctrl+Alt+Del to restart.

Model: HP G62 Notebook PC
System ID: 1439
Product ID: WR444EA¤UUW
Warranty Start Date: 08/06/2010
Processor Type: Intel(R) Pentium(R) CPU P6000 @ 1.87 GHz
Processor Speed: 1870 MHZ
Memory Size: 4096 MB RAM
BIOS Date: 06/28/2010
BIOS Revision: F.0B
Serial Number {Removed for privacy}
Keyboard Controller Revision: 60.22
OS: Windows 7 - don't remember if 64 or 32 tbh (it's my GFs laptop)
Error:
Suddenly today, about 9 hours ago, the laptop froze while surfing normally on the net.. After a reset - done as followed: holding power button till computer shuts down, and power on again - the computer wouldn't start windows again, and only gives the message:
A disk read error occurred. Press Ctrl+Alt+Del to restart.
And will repeat the message after booting up with HP logo, and not enter Windows, time and time again if you press C+A+D
I've tried recovery system, but that didn't work, and I'ved tried CHKDSK and it found and said it repaired some errors but it still happens.
I then ran the start-up-test and in the end I got Failure ID 90DX6C-56S5S1-9XL03f-60S403 on Hard Disk 1.
I tried to Google it, and no results.
No recent system updates or anything new installed in a few weeks.

Hi,
It would look like the Hard Drive is failing/failed, but try running the following test from the bios menu as it can provide a more meaningful error code.
Shutdown the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run a test on the Hard Drive. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

After updating to Firefox 3.6.9, when I click on a link in Outlook email, I get a message which says "General failure. The URL was: .... An error occurred in sending the command to the applicatio." and the link will not open. How can I fix this?

I updated Firefox yesterday to 3.6.9. When I receive a URL link in an email within Outlook, I cannot open the link in Firefox. As I said in the question, when I click on the link, a Microsoft Office Outlook error message appears which states that a General failure has occurred in sending the command to the application (which is Firefox). I am using Office 2007 This did not occur prior to the upgrade of Firefox.

See this lnk for a fix, it worked for me!
http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

Does anyone know how to solve: "Firmware update failure. Disk write error"?

Hi all,
Here is the list of all what went wrong and where I am now:
1. My Ipod worked well
2. I wanted to update it, you know, the normal thing with Itunes
3. Every time I tried, my computer froze. I was unable to add only one song (both automatically and manually).
4. I took my external drive (where my music is) at work and tried again: same result.
5. I decided to run the Updater I have on the CD that came with the Ipod.(2005-02-07; I usually avoid the newer version, having had once a problem when putting a newer version of Updater).
6. The Updater was unable to operate any action on my Ipode (I don't remember the messages now).
7. Like I tried what I describe here above like a hundred time. I decided to format the Ipod with Windows (My Computer, right click on the Ipod, format).
8. It did and now I have only the famous folder with an exclamation mark on my Ipod.
9. Now when I am running the Updater, it says it cannot Restore the factory settings giving this message "Firmware update failure. Disk write error".
I would appreciate any help because, during the last 2 hours, I read and tried all I found on the Support Help here on the Apple web side without any result yet.
Thank a lot for your answer

Hi Cyrille,
Have you looked at Knowledge Base Document #301267 on "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod?
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything.

Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything. Any work around to fix this?

See this lnk for a fix, it worked for me!
http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

SQL Server 2012 installation failure An error occurred for a dependency of the feature causing the setup process for the feature to fail.

I am installing SQL Server 2012 Developer (from ISO image written on DVD), my machine has Windows 7 (Edit: Windows 7 with service pack 1) on it. This machine already has SQL Express and SQL 2008 R2 Express installed in it.
On running 2012 setup it goes fine from Setup Support Rules to Installation Progress. In Installation Progress after some progress installation fails.
Windows show the following components couldn't installed:
Managment Tools Complete Failed. Client Tools Connectivity Failed. Client Tools SDK Failed. Client Tools Backwards Compantibility Failed. Managment Tools Basic Failed. SQL Server Data Tools Failed. Reporting Services -Native Failed. Database Engine
Services Failed. Data Quality Services Failed. full-Text and Semantic Extractins for Search Failed. SQL Server Replication Failed. Integration Services Failed. Analysis Services Failed. SQL Client Connectivity SDK Failed.
In detail for failure of every component it provide these details:
Action required:
Use the following information to resolve the error, and then try the setup process again.
Feature failure reason:
An error occurred for a dependency of the feature causing the setup process for the feature to fail.
In summary log file it provide the following details:
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2068643839
Start time:                    2012-07-31 16:23:37
End time:                      2012-07-31 16:33:32
Requested action:              Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS:        Use the following information to resolve the error, and then try the setup process again.
Next step for Conn:            Use the following information to resolve the error, and then try the setup process again.
Next step for SDK:             Use the following information to resolve the error, and then try the setup process again.
Next step for BC:              Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS:            Use the following information to resolve the error, and then try the setup process again.
Next step for BIDS:            Use the following information to resolve the error, and then try the setup process again.
Next step for RS:              Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine:       Use the following information to resolve the error, and then try the setup process again.
Next step for DQ:              Use the following information to resolve the error, and then try the setup process again.
Next step for FullText:        Use the following information to resolve the error, and then try the setup process again.
Next step for Replication:     Use the following information to resolve the error, and then try the setup process again.
Next step for IS:              Use the following information to resolve the error, and then try the setup process again.
Next step for AS:              Use the following information to resolve the error, and then try the setup process again.
Next step for SNAC_SDK:        Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name:                  Haansi-PC
Machine processor count:       4
OS version:                    Windows 7
OS service pack:               Service Pack 1
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
SQL Server 2005      SQLEXPRESS           MSSQL.1
Database Engine Services                 1033                 Express Edition
9.4.5000        No
SQL Server 2005      SQLEXPRESS           MSSQL.1
SQL Server Replication                   1033                 Express Edition
9.4.5000        No
SQL Server 2005      SQLEXPRESS           MSSQL.1
SharedTools                              1033
Express Edition      9.4.5000        No
SQL Server 2005
Tools                                    1033
Express Edition      9.4.5000        No
SQL Server 2005
ToolsClient                              1033
Express Edition      9.4.5000        No
SQL Server 2005
ToolsClient\Connectivity                 1033                 Express Edition
9.4.5000        No
SQL Server 2008 R2   SQLSERVER08EXPR2     MSSQL10_50.SQLSERVER08EXPR2    Database Engine Services                 1033
Express Edition      10.50.1617.0    No
SQL Server 2008 R2   SQLSERVER08EXPR2     MSSQL10_50.SQLSERVER08EXPR2    SQL Server Replication                   1033
Express Edition      10.50.1617.0    No
SQL Server 2008 R2
Management Tools - Basic                 1033                 Express Edition
10.50.1617.0    No
SQL Server 2012
LocalDB                                  1033
Express Edition      11.0.2318.0     No
SQL Server 2012
Reporting Services - SharePoint
11.0.2100.60    No
Package properties:
Description:                   Microsoft SQL Server 2012
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
SPLevel:                       0
Installation location:         F:\x64\setup\
Installation edition:          Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      false
AGTSVCACCOUNT:                 NT Service\SQLAgent$SS2012
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Manual
ASBACKUPDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Config
ASDATADIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Data
ASLOGDIR:                      C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Log
ASPROVIDERMSOLAP:              1
ASSERVERMODE:                  TABULAR
ASSVCACCOUNT:                  NT Service\MSOLAP$SS2012
ASSVCPASSWORD:                 <empty>
ASSVCSTARTUPTYPE:              Manual
ASSYSADMINACCOUNTS:            PC\Haansi
ASTEMPDIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Temp
BROWSERSVCSTARTUPTYPE:         Automatic
CLTCTLRNAME:                   <empty>
CLTRESULTDIR:                  <empty>
CLTSTARTUPTYPE:                0
CLTSVCACCOUNT:                 <empty>
CLTSVCPASSWORD:                <empty>
CLTWORKINGDIR:                 <empty>
COMMFABRICENCRYPTION:          0
COMMFABRICNETWORKLEVEL:        0
COMMFABRICPORT:                0
CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
CTLRSTARTUPTYPE:               0
CTLRSVCACCOUNT:                <empty>
CTLRSVCPASSWORD:               <empty>
CTLRUSERS:                     <empty>
ENABLERANU:                    false
ENU:                           true
ERRORREPORTING:                false
FEATURES:                      SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, BIDS, CONN, IS, BC, SDK, SSMS, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  NT Service\MSSQLFDLauncher$SS2012
FTSVCPASSWORD:                 <empty>
HELP:                          false
INDICATEPROGRESS:              false
INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    SS2012
INSTANCENAME:                  SS2012
ISSVCACCOUNT:                  NT Service\MsDtsServer110
ISSVCPASSWORD:                 <empty>
ISSVCSTARTUPTYPE:              Automatic
MATRIXCMBRICKCOMMPORT:         0
MATRIXCMSERVERNAME:            <empty>
MATRIXNAME:                    <empty>
NPENABLED:                     0
PID:                           *****
QUIET:                         false
QUIETSIMPLE:                   false
ROLE:                          <empty>
RSINSTALLMODE:                 DefaultNativeMode
RSSHPINSTALLMODE:              DefaultSharePointMode
RSSVCACCOUNT:                  NT Service\ReportServer$SS2012
RSSVCPASSWORD:                 <empty>
RSSVCSTARTUPTYPE:              Manual
SAPWD:                         <empty>
SECURITYMODE:                  <empty>
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT:                 NT Service\MSSQL$SS2012
SQLSVCPASSWORD:                <empty>
SQLSVCSTARTUPTYPE:             Automatic
SQLSYSADMINACCOUNTS:           Haansi-PC\Haansi
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  false
TCPENABLED:                    0
UIMODE:                        Normal
UpdateEnabled:                 true
UpdateSource:                  MU
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
Detailed results:
Feature:                       Management Tools - Complete
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Client Tools Connectivity
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Client Tools SDK
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Client Tools Backwards Compatibility
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Management Tools - Basic
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       SQL Server Data Tools
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Reporting Services - Native
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Data Quality Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Full-Text and Semantic Extractions for Search
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Integration Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Analysis Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       SQL Client Connectivity SDK
Status:                        Failed: see logs for details
Reason for failure:            An error occurred during the setup process of the feature.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\SystemConfigurationCheck_Report.htm

Please help.
I did what you suggested, but, still got error message to install SQL server data tools: Here is the log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068037632
Start time: 2014-09-29 15:05:38
End time: 2014-09-29 15:15:55
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SSDTBI_VS2012: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: MSBI
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2008 Management Tools - Basic
1033 Express Edition 10.0.1600.22 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Basic
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Complete
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools SDK
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 SQL Server Data Tools
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Integration Services
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\9f7a58aa5d6d76ffe6be968a4ad339f5\x86\setup\
Installation edition: Express
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x86
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x86
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SSDTBI_VS2012, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\ConfigurationFile.ini
Detailed results:
Feature: SQL Server Data Tools - Business Intelligence for Visual Studio 2012
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio Tools for Applications 2012
Component error code: 0x80044000
Component log file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\VSTA2012_LangsSupport_Cpu32_1.log
Error description: VS Shell 2012 installation has failed with exit code -2147205120.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3436.0&EvtType=VSTA2012_LangsSupport%40Install%400x-2147205120
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\SystemConfigurationCheck_Report.htm

"firmware update failure. disk write error."

i get this when i use the ipod Updater after clicking "restore"... this thing is giving me a headache. Also get the previous mentioned "cannot read from or write to disk" error when using itunes after a couple downloads. i followed the steps in the link to those issues and ran some updates on my PC and still the same. HELP

Have you read both
For Firmware update failure. Disk write error please see
http://docs.info.apple.com/article.html?artnum=301267
http://docs.info.apple.com/article.html?artnum=300836

An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. mail will not be sent.

Hii all,
I have a subscription which used to send report email daily 10 am morning
now today it does not sent an email the status i s showing above error message ..
why this occurs ?? at the time of subscription running time ??
i have checked there is not error of subscription it runs fine ..
only today errored ..
Kindly , help me
Dilip Patil..

Hi Dilip,
Based on the error message "An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database." it seems the issue is caused by the Report Server catalog databases are
corrupted.
To fix this issue, I suggest that you use the Reporting Services Configuration Manager to recreate the Report Server catalog databases. In addition, please make sure report server instance can connect to the report server database. For more details about Configure
a Report Server Database Connection (SSRS Configuration Manager), please see the following document:
http://msdn.microsoft.com/en-IN/library/ms159133.aspx
Besides, if the issue is caused by the connection to the SQL Server Reporting Services Report Server catalog database is timeout. Please refer to the following thread:
http://social.technet.microsoft.com/Forums/en-US/db4ca6c2-5445-4ff9-9f63-e20f3859cc70/error-throwing-microsoftreportingservicesdiagnosticsutilitiesreportserverstorageexception-an?forum=sqlreportingservices
If the problem is still existed, I would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

An error occurred during the submit process. Unknown failure

in forms central, when i submit a form via reader v11 the error An error occurred during the submit process. Unknown failure. The form can be submitted with adobe professional 11.

Hi,
would you please describe the error message or insert a image to here? and if you can share your pdf form to me, that's would be very help us to reproduce and resove the issue. my email: [email protected]
Thanks,
Guanshuai

When i click on a web link in an email, i receive a "general failure" message reading "an error occured in sending the command to the application". this has only started since my upgrade to 5.0

i have an HP Pavilion with Windows 7, Outlook 2007 and Firefox 5.0. since my upgrade to 5.0, i receive the following error message when clicking on a url in an email. message reads:
General failure. The URL was: [here it repeats the URL]. An error occurred in sending the command to the application.
what is the cause? what can be done to correct?
thanks in advance.

I have the same problem after updating to 6.0.2 on Win 7 Pro SP1. Did not have any problems prior to upgrade to 6.0.2. (setting IE as default browser - yuk - allows links to be clicked with no problem)

Repair Disk Permissions Error: The underlying task reported failure on exit

Hi All...
any idea about this error when trying to Repair Disk Permissions using "Disk Utility" :
"Error: The underlying task reported failure on exit."
No repair is made at all! It just stops right after being launched
It happens either when booting on the Leopard CD or on external FW drive...
Cheers guys!!

riccopicco wrote:
I've finally gave in, and bought an iMac.
Transferred my old G4 to the new, fesh, Leopard installed iMac Intel chip....
I've been getting the same thing just after 1 week with this new system!!!
Someone help!!!
It sounds as if you transferred the errors when you migrated your files from the G4. Something in that old filestructure that is not right. It might be the ownership of a single file somewhere.
Have you considered DiskWarrior?

Disk Utility Error: The underlying task reported failure on exit 1

    #!/bin/bash
      # Author : Bill Hernandez
    # Location : Plano, Texas
    # Updated : Saturday, June 6, 2009 (1:48 PM)
    # script name : setdisk_ownerenabled
    # make sure to set permissions to execute
    <hr>
    # Description :
    <hr>
    # I've noticed that sometimes when using disk utility I cannot repair permissions, or I might get :
    # ERROR: The underlying task reported failure on exit 1
    # This shell script seems to have solved the problem.
    # It worked very well for me,
    # IF YOU USE THIS SCRIPT, IT IS AT YOUR OWN RISK...
    # DO NOT USE IT UNLESS YOU UNDERSTAND WHAT IT DOES
    # After running it, it is best to restart before using Disk Utility again
    <hr>
    # Details :
    <hr>
    # After partitioning a disk using "Disk Utility", and then begin using it, at some point I would get
    # an arror message when trying to save to one of the partitions, yet when I looked at the permissions
    # everything looked fine. I would then try to use Disk Utility to repair permissions and end up with a
    # cryptic error that pretty much told me nothing.
    # I noticed that while in Disk Utility, if I selected a partition the lower LH corner of the dialog
    # showed : Owners Enabled : No
    # I tried selecting the partitions at the Desktop and doing a (CMD-I) and at the very bottom of each
    # info dialog there was a checkbox :
    # [ ] ignore ownership of this volume
    # which I would check, even after logging in as root, and I couldn't seem to get a consistent way
    # to get rid of the permissions dialog failure, so I found the vsdbutil command which can be used
    # as follows to get partition, or disk info :
    # $ vsdbutil -c /Volumes/driveor_partitionname
    # ----> Permissions on '/Volumes/driveor_partitionname' are enabled.
    # if it is not enabled you can enable the disk or partition using :
    # $ vsdbutil -a /Volumes/driveor_partitionname
    # It will set "Owners Enabled : Yes"
    # This below script loops through the mounted disks, partitions, etc. and gives you information.
    # You can leave the three flags below all set to TRUE, or selectively use what you want and change
    # the rest to false...
    <hr>
    # CHOOSE {"TRUE", "FALSE"}
    <hr>
    getvolumestatus="TRUE"         # get "Owners Enabled : (Yes|No)" status
    setvolumestatus="TRUE"         # set "Owners Enabled : Yes"
    list_volumes="TRUE"                   # show volume names
    <hr>
    # DO NOT CHANGE ANYTHING BELOW HERE
    <hr>
    if [ $getvolumestatus == "TRUE" ]; then
     echo '============================='
     echo '$getvolumestatus'
     echo '============================='
     # get "Owners Enabled : (Yes|No)" status
     for i in $( df -l | sort -u | awk '{print $6}' | grep '/' ); do
     vsdbutil -c $i
     done
    fi
    <hr>
    if [ $setvolumestatus == "TRUE" ]; then
     echo '============================='
     echo '$setvolumestatus'
     echo '============================='
     sudo echo -n
     # set "Owners Enabled : Yes"
     for i in $( df -l | sort -u | awk '{print $6}' | grep '/' ); do
     sudo vsdbutil -a "$i"
     echo "setting Owners Enabled : Yes for ---> $i"
     done
    fi
    <hr>
    if [ $list_volumes == "TRUE" ]; then
     echo '============================='
     echo '$list_volumes'
     echo '============================='
     for i in $( df -l | sort -u | awk '{print $6}' | grep '/' ); do
     echo $i
     done
    fi
    <hr>


As it turns out, this didn't completely solve the problem, it solved part of the problem.
Here is a summary to the root cause of the problem.
SUCCESS...
Problem Summary : The system crashed and would hangup during boot, tried many things, until I eventually erased the disk and started over again.
iMacG5 24 GHZ Intel with One internal disk partitioned into 3 logical drives
Cub_1 OS X 10.5.7
Cub_2 OS X 10.5.7 (Carbon Copy Cloner backup of Cub_1)
Cub_3 OS X Server 10.5.7 (standard os x server setup)
At some point after setting up standard preferences, OS X Server crashed.
When I tried to restart, the machine would hang up during boot.
Finally after several attempts, ran Disk Utility from install dvd and repaired Cub_3
When I tried to run "Repair Permissions" on Cub_3 from install dvd, I got an error
Disk Utility Error: The underlying task reported failure on exit 1.
Rebooted, and started in single user mode (CMD-S) during boot until I saw the unix commands on the screen
RAN : root # fsck -fy
Then I began seeing the same command filling the screen :
posix_spawnp("/usr/sbin/mDNSResponder") could not find file or directory
Called Enterprise Support and spoke to Frank Alcorn, he said this was most likely a permissions problem and asked me to try repairing permissions from the install dvd. I told him about the error, but nevertheless I tried it again and got the same Disk Utility Error: The underlying task reported failure on exit 1..
He asked me to try booting into single user mode again, and to try
root # chmod 775 /
root # reboot
During the reboot process the machine got hung up again, and could not get the single user mode to work at all.
Frank said the command needed to be :
root # chmod 1775 /
Frank asked me if I had changed anything in file sharing, and I told him I had. He asked me what I had shared, and I said the entire drive Cub_3. He asked me what I had done for permissions, if I had denied permissions to anyone. I told him that I had set myself up as the only user that could have access to it, and when he said that's where the problem was the lightbulb went off, and it made sense.
Shortly after I set the sharing preferences is when the server crashed. It all makes sense now...
Frank said not to share the entire disk, only portions (share points) of it. I had done this in Panther Server, and Tiger Server and it worked fine, but apparently Leopard Server works a little differently, maybe more secure.
It seems to me that if sharing the entire disk, which is what I needed would cause such a problem there should have been some sort of warning from the operating system, but there wasn't. I had run into this problem several times over the past three weeks since I had started working with Leopard Server, but in each case I ended up re-installing OS X Server and starting over again.
I told him I would try to reboot from the OS X partition (Cub_1) and try it from there.
He asked me to let him know if it worked, and I said I would...
Problem FIX :
I booted back into the partition containing OS X (Cub_1) and did the following via the Terminal.
$ su - root
$ chmod 1775 /
$ reboot
During the reboot process I held down the (OPTION) key, and selected Cub_3 (the os x server partition) and sure enough after a few minutes of holding my breath the login window magically appeared. So I logged in, and did not have to re-install the server. Hallellujah....
This solved the boot hang problem. It is great to finally have an answer. In retrospect it makes sense, but that's why its hindsight...
The reason for sharing the entire disk in my mind was that since I was the only user on the system, it was easier to have one disk mounted on my workstation rather than several folders. It made sense to me, it still does. I don't need a bunch of folders, just one disk is easier...

Firmware failure. Disk write error.

I have gotten this new iPod shuffle, and I have installed the latest itunes, however when I try to install the latest software for the iPod I get "firmware failure. disk write failure." I get the same thing when I try to restore it. I cannot get windows or iTunes to recognize the iPod. Windows views it as a mass storage device, and it is completly oblivious to iTunes. Any suggestions as to what I can do? I have tried everything 3 times or more from the support pages.
I cant seem to contact any other type of support. Every time I try to use the chat section it tells me to enter a valid serial number...
wow.
Any feedback is greatly appreciated.
JP

Okay, this probably isn't what people want to hear, but if you have the dreaded 'Disk Write Error' failure, it doesn't necessarily mean your iPod is hooped.
Bought my Shuffle 1G yesterday. Brought it home, installed what I needed to (very little, as mine is the second Shuffle in the house). Anticipated problems, as my father's 512M Shuffle took three days to get working properly. I found myself pleasantly surprised to find that mine worked first shot, no muss or fuss. Funk-tacular!
Or not. Thingy worked fine all last night and this morning, but fell flat on its face when I plugged it in this afternoon. It didn't freeze solid (at first), but it refused to take in any more songs, and the ones that were loaded into it seemed to be draining out of the memory like water from an uncorked bathtub -- every time I managed to get Itunes to notice my little white headache, more memory reported as empty, though Thingy still refused to take in any songs (unable to read, or some such windows nonsense). Every time I tried to restore -- regardless of the update version, of which I tried three -- I saw the error mentioned in the title.
I'll delete about five hours of experimenting, hair-pulling, swearing, failing, wall-punching, and generally despairing over my iPlop purchase. Tried all five Rs to no avail, as well as formatting through windows. Nada.
I wish I could tell you exactly why it's working now. I can't; I got lucky. I downloaded iPod update (1-10-2006) and Itunes (6), wiped the system as clean as I could of old iPod and iTunes software (uninstall, erase folders, empty Recycle Bin, basically everything short of taking Windex to the hard drive). Reinstalled the Ipod software from the CD, reinstalled and updated iTunes and iPod update, then for a lark decided to try for the fifteenth time to reinstall Thingy. Holy crap, it worked!! After a momentary freezeup and the requisite restore to fix it (a result of my yanking the stupid thing out of the port at the wrong time), Thingy is working fine.
The moral? Don't despair, it can be fixed! Try everything more than once, get the latest software, start from scratch -- right from the CD in the iPoop box -- and keeping banging your head on it as long as you can stand it. You might be surprised!

"Software Update Failure - an error occurred installing i0S6."

I tried to update my iphone 4 through my settings and got the error "Software Update Failure - an error occurred installing i0S6." This is not the first time that happens. I got the same error in the last 3 ios updates. The only way that I found to solve was to update by itunes, but as we have the option to update through iphone, I want to do that.
Any suggestions on how to solve this problem will be most appreciated.

In the last 3 ios updates I had to use itunes because through the settings I always get the same error message. The point is that I don't want to use the itunes. I want apple to fix the problem (as I can see I'm not the only one having problem). I have 2 friends that did the update in the same time that I was trying to do, and for both them it worked.

Restore fails with "Firmware update failure. Disk write Error" message

I am going totally bonkers with this one. My Shuffle stopped working suddenly.
My iTunes was not able to read the contents of the iPOD and there seems to be a corrupt filesystem. After reviewing various posts, I have tried the following with little success:
1. Tried Restore using the Updater tool that came with the Shuffle (2005-09-23). I kept getting the "Firmware update failure. Disk write Error"
2. Downloaded the new updater tool (2006-03-23) and tried restore again. I got the same error message again.
3. Tried formatting using Windows format, it is not able to complete the format
4. Tried chkdsk. Get an error message saying "CHKDSK is not available for RAW drives."
5. Tried connecting it to a different computer and tried pretty much the same steps. Similar results.
I am using USB 2.0 both on my current Thinkpad as well as the other computer I tried with.
I am totally clueless and am not sure how to go about fixing this one. Though there have been lots of posts about this, I haven't been able to find a solution that works for me. Any thing else that I may have missed out which I can try?
Thanks,
Kris
Thinkpad Windows XP Pro

hiya!
just checking. have you worked through the possibilities from this document yet?
"Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
given that you're connecting to a laptop, we'd better check on this possibility too:
iPod not recognized when connected to Windows laptop over USB
... and even though you aren't using a Toshiba, this technique might be worth a try (if all else fails):
iPod not recognized correctly on Toshiba laptop
love, b

Formatting failure, disk write error

my 1 and 1/2 year old ipod 20G went into vulcan mind warp, the screen froze up displaying english and other language choices. i have down loaded the most recent update, june of 06 and tried to restore the beast, but half way through the update i get "formatting failure, disk write error". does it ever get better i have tried this restore several times but half way through the down load it dies. how do you get the software to down load to the pod and get the thing back to working order.

thanks for the help. it did not seem to be a fire wire issue as the kids use the same port and wire on there nanos, so i plugged into the ports in the back of the new (2month old) dell computer. the computer did not see the ipod so i plugged it back into the front ports, ran updater, and it ran all the way through, updating the ipod and telling me to pug into an external power source for firmware to update. this is further then i have been able to go in getting the ipod working again. hope it works when i take it off the charger.
thank you
jim c.

Failure id 90DX6C-56S​5S1-9XL03f​-60S403 - A disk read error occurred. Press Ctrl+Alt+D​el to restart.

Similar Messages

Maybe you are looking for

Failure id 90DX6C-56S5S1-9XL03f-60S403 - A disk read error occurred. Press Ctrl+Alt+Del to restart.