Failure id probook 4530s

Hi
Friend of mine has a problem with his notebook its very slow.
I run hp diagnostic on it and it report.
FAILURE ID: U4PLX0-00067D-XD6V4J-60XS03
PROD. ID: LH430EA#BED
HD.CAPACITY : 640GB
I think he need to go to HP service for a new hdd .
Thanks in advance for any help / info

Hi,
Failing the Disk Self Test ( DST ) usually indicates a mechanical problem with the HDD and this is certainly consistent with the 'slow running' issue.
The only practical option is to replace the drive.
If the notebook is still under warranty, contact HP and arrange for the drive to be replaced - you can check the warranty status Here.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

HP ProBook 4530s USB 3.0 driver failure

Hi,
I have a ProBook 4530s (pn:A1D18EA#AKC) with Win7 x64 English version. There is a renesas USB 3.0 Host controller built in.
When I install the device driver it works correctly but when I close the lid of laptop and turn it back the HW stops working and the "This device cannot start. (Code 10)" error appears in device status under device manager. When I uninstall the driver, reinstall, reboot then it works until the first sleep. Hibernating turned off. I tried many drivers without success.
If i disable the device under device manager and re-enable it it solves the problem but it is not normal. It is seriously annoying me.
At this time the driver information is this:
Renesas Electronics
2011.10.25.
2.1.28.0
Microsoft Windows Hardware Compatibility Publisher
There is a Microsoft Virtual WiFi Miniport Adapter in device manager without driver.
It displays a "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)" message. What is this hardware and where can I found a driver?
Thanks

Here are the device manager after powerup from sleep or from shutdown:

Hp probook 4530s drivers for windows 7 ultimate 32bit

I am running Windows 7 Professional 64bit on my hp probook 4530s notebook, and I am going to upgrade to Windows 7 Ultimate 32bit. but I will need the drivers for the new windows, because i will have to format the laptop to change from 64 bit to 32 bit.
So where can i download all the drivers.
kind regards
Jean Meintjes

Hi, Jean:
Below is the link to the support and driver page for your notebook:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=5060882&lang=en&cc=us...
Just use the W7 Pro 32 bit drivers for your W7 Ultimate installation.
They will work just fine.
Best regards,
Paul

How to write a recovery disc in my hp probook 4530s?

i have baught this probook 4530s from Dubai.. and i didnt know how to write a recovery disc in dvds...?
So plz help me?
or should i get the recovery dvds from hp office?

zalakpatel wrote:
i have baught this probook 4530s from Dubai.. and i didnt know how to write a recovery disc in dvds...?
So plz help me?
or should i get the recovery dvds from hp office?
Hi,
Please select option(s) from this link to create a set of Recovery disc for your machine.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP ProBook 4530s won't power up

Hi, When I power up the HP ProBook 4530s the power button lights up but the display doesn't come on. It stays that way untilI power the notebook down (nothing is displayed whatover). The battery is in useless condition and the notebook runs on AC power only. Recently (two weeks before the post) I received the error "The User Profile Service failed the logon. User profile cannot be loaded” error message in Windows 7 and fixed it by booting the computer in safe mode and fixing the registry entries. I can see that the USB port receives power and both the cooling fans (internal and external) are functioning when I power up. Would be deeply gratified if you can help me sort this out. Thanks,Rajasekar Vijayaraghavan

Hello Amishware,
Your Probook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forums
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Screen does not turn on after sleep - ProBook 4530s - Windows 8.1 (64bit)

Hi everyone,
Not sure if this had to be posted in notebook display and video section, or laptop lockups, freezes and hangs. Anyway, I have a problem, where everything is fine with the computer, it's running smoothly, but whenever I make it go to sleep, after it does it instantly, the signals are of a regular laptop sleep - power buton flashing, no other signs of computer being on.
However, the problem appears when turning the computer back on after sleep. After pressing the power button, the computer straight away starts working - you can hear the fan turned on, etc, just that pretty much nothing changes with the screen. Sometimes, with some particular light directed towards the screen, you can even see, that the computer is on (seeing the clock on the display), just like the brightness was set down to 2% or something. And there is nothing that helps from what I have tried to do (tried reinstalling both AMD drivers and Intel HD drivers). I researched this problem extensively but could not find a solution, however, as I have noticed that this is quite an old problem (assuming from the date of the posts this problem first showed up), there might be a solution for it, to which I just have not noticed the answer?
If anyone can help me, please do, the sleep function is essential and extra important function when living on campus at university, I just cannot operate like this.
Hopefully someone will know, thank you in advance.
Dinas

Hi @dindanas,
Your ProBook 4530s is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Mouse Pad is not working properly while plugged in of Probook 4530s Notebook????

1. Product Name and Number
HP Probook 4530s (Intel Core i5). RAM 6 GB, Hard 750 Gb, Radeon 1 GB card,
Mouse PAD configs ............Synaptics luxpad v7.5,,,,,,,,and........Synaptics luxpad buttons v7.5
Operating System installed:
Windows 7 64 bit Proffessional.
Everytime I plug in the charger, the mouspad starts hanging................What is that........???? Sometimes it stops working at all..............One thing to note is that right and left click buttons are working fine.........
Any suggestions......???

By hanging do you mean it just gets very slow to respond? This only happens when you plug in the charger? I would make sure all your drivers are up to date. Do this happen when the computer is running off battery?
Thanks
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

In my hp probook 4530s comes with windows 7 home premium,internal bluetooth is disabled by the windo

I am using hp probook 4530s comes with windows 7 home premium.In my laptop internal bluetooth is disabled by the windows from device manager, how can I enable it ?Please help......The error is:Windows has stopped this device because it has reported problems. (Code 43)

It sounds like your laptop is possibly overheating ,which will cause a shutdown. Have you checked your cooling fan to be sure it is working? Cleaned the vents/ports with compressed air to increase airflow?
How to prevent and deal with overheating
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Hp probook 4530s

hdmi port on probook 4530s doesn't work when i connect it to TV Hdmi port nothing appears. i tried duplicate, Extend mode but nothing.. can anyone help?

Hello giorgi123, welcome to the HP Forums.
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can click here for the link.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Remove password on hp probook 4530s

Hi, I have an Hp ProBook 4530s and I put a password on it through the hp protect tools. I do not want the password anymore, I do know it. But I do not want to remove my battery or any internal parts of the laptop. How can I remove it, also if you do know, can you please tell me step by step how to remove it, I am not an electronic wizard and dont know much about the laptop I have only had it a couple of weeks. Thank you so much.

This is a tough one to go with but luckily, I found a solution for you. Check this thread from HP. Good luck.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/Removing-HP-ProtectTools/m-p/149614#M220...

Recovery Disc & new ProBook 4530s

How do I create a recovery disc for a new ProBook 4530s with Windows 7? I can't find Recovery Manager software on the pc and the pc didn't ask me if I wanted to create a recovery disc.

Hi:
I don't think you can create a recovery disk on a 4530s.
It should have a recovery partition which you can use to restore the PC by striking the F11 key at the splash screen and launching the recovery process. Of course a recovery partition is useless if the hard drive dies, or you want to install a new HDD.
You can order a quick restore disk set, which I always do for all my HP business PC's and notebooks for $10, if you live in the USA or Canada. If you don't live in the USA or Canada, skip to the bottom of my post for instructions to order.
Here's how:
1. Write down the part number and serial # on the bottom of the computer on the white tag. The model # is an HP-Compaq 4530s, but the part number will be found on that white tag below the serial #.
2. Call HP at 1-800-952-7689, option 1 (ordering restore disks is part of the list in the option).
3. Provide the info asked by the rep that answers the phone. Some just ask for the serial #, some want both, or they will just want the serial number and type of computer (4530s).
4. Have a Master Card or Visa ready for purchasing. You will be charged $10.00.
You will receive the disks by First Class Mail or you can pay an additional $10.00 for FedEx shipping.
If you don't live in the USA or Canada, contact HP Support by telephone for the country you live in at the link below. If they have a separate number for business PC's/notebooks, call that number. You will need to provide the customer services rep the same info as above (model and serial #).
Costs range from free to more than $10 depending on where you live.
http://www8.hp.com/us/en/hp-information/summary/ww-support.html
Paul

Probook 4530s cpu upgrades

I was wordering for an upgrade on my probook 4530s i would like to know some or all if able proccessors for this laptop.... can you tell me some??

Hi @AKTG
I see that you are looking for a list of compatible processors for your ProBook 4530s. Here is the Maintenance and Service Guide for your model. On page 97 you will see a list of compatible processors and how to replace it.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Cannot install driver vga 7470m for probook 4530s

Hello, I come from Vietnam, I have the following problem, my laptop does not install ProBook 4530s is vga amd 7470m, when I set the laptop screen was dark again, I have to turn off or remove vga go away, the new used to be normal, but only usable only vga HD300. I have tried several times to install win, vga latest update, install all drivers but still above. ask how to fix how, I would like to thank

Hello @pio4791 ,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Even though this is a Commercial product, here is a link to your drivers from your product page for Windows 7. I would uninstall the Video drivers from your device manager. All of the drivers and software. Restart the notebook and check the device manager. If the video drivers are installed not further action is needed.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers that need updating.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Virtualization support in HP Probook 4530s

Bonjour,
I have HP Probook 4530s. I am using VirtualBoxPro on Windows 7 Ultimate 64-bit. I wanted to use acceleration support in a virtual machine in VirtualBoxPro but the acceleration tab was disabled in the software. I went through many forums and found that accleleration and virtualization have to be enabled from the BIOS. But virtualization support is also disabled in the BIOS.
How can i enable it in the BIOS coz all my work is dependent on the virtualization support.
Kind Regards
Scott Thomas

What processor do you have? I am pretty sure the system can do hardware virtualization, but only if you have a processor capable of it, and not all of them are.

Igdpmd64.sys BSOD on HP ProBook 4530s Windows 7 64-bit

I used my HP ProBook 4530s with Windows 7 64-bit and Internet Explorer 8 (IE8) installed since 2011 with no issues.
Recently I updated Windows to SP1 and IE10. All works well except one thing.
When I run IE10, open few tabs and hoover my mouse over IE10 icon so that it shows the half-transparent small windows my PC crashes.
It shows blue screen with PAGE_FAULT_IN_NONPAGED_AREA message caused by igdpmd64.sys driver.
1) I found at HP forum the post "igdpmd64.sys BSOD on HP Envy14t".
I followed the recommendation to uninstall KB2670838.
However after rebooting PC the IE10 disappeared and IE8 came back to life.
I updated then Windows trying to block the KB2670838 installation but it was impossible since KB2670838 was not shown at the list but somehow "installed in the background".
So I was back to the point "all works well except one thing".
2) I found another forum post which recommended to upgrade the igdpmd64.sys driver.
I went to: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5060881&swLangOid=8&swEnvOid=4058
Chose: Drivers - Graphics (3)
Downloaded the newest Intel Graphics Kernel Mode Driver 8.15.10.2559 from 2012-02-22
However during the installation process I received a message (2a):
"This computer does not meet the minimum requirements for installing the software".
I called HP support who advised to install the previous version of the driver.
I did it but received the same message (2a)
I called HP support again who advised to install the driver from the Intel page.
3) I went to: https://downloadcenter.intel.com/search?keyword=Intel%c2%ae+Q45+Express+Chipset
Downloaded: Intel® Graphics Media Accelerator Driver, Windows 7* 64, Windows Vista* 64 (exe)
graphics driver version 15.17.19.64.2869 (8.15.10.2869) for Intel® integrated graphics.
However during the installation process I received a message (2a).
I have no more ideas. Could anybody help me please ?
Best Regards,
Sylwek
This question was solved.
View Solution.

I know it's weird that I reply to myself.
HP support advised me to install the ATI Video Driver and Control Panel
at:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5060881&swItemId=ob_101995_1&swEnvOid=405...
It helped :-)
Thank you HP support Poland

Failure id probook 4530s

Similar Messages

Maybe you are looking for