Failure installing J2SE Dev Kit 5.0 update 3 on laptop w/ Windows XP SP 1

Using either of the online or offline installation packs for Windows I end up with an error dialog stating 'The system cannot open the device or file specified'.
Clicking 'Retry' doesn't help. Clicking 'Cancel' brings up another dialog with a message like...
Internal error 2755. 110, C:\Documents and Settings\smart61\Local Settings\Application Data\{32A3A4F2-B792-11D6-A78A-00B0D0150030}\J2SE Development Kit 5.0 Update 3.msiThe installation works fine on a desktop machine but fails every time on every laptop I've tried.
Any advice? I've seen other old threads referring to error 2755 with msi's. But none of the solutions I've seen seem to apply. If someone has a simple recipe for fixing this, I would be quite grateful.
Thanks,
~chuck

There is quite a list of non-Java posts that address this error, see
http://www.google.com/search?q=%22Internal+error+2755%22The problem is related to the Microsoft Installer.

Similar Messages

Problem in installing J2se dev. kit 5.0 update 8

Hello,
I am using win XP as my OS. I just want to install the J2SE standard edition dev. kit so i downloaded it from internet and once i am going to install it, after coying some files, it shows me the error no. 1335 and saying that the cabinet file data1.cab required for this installation is corrupt and cannot be used and the whole transaction is roll back. Pls. suggest what to do ? I am new to java technology and wants to write java programs and wants to compile. What to do? I have already downloaded ths J2SE dev. kit 5.0 update8.
Pls. suggest

I would suggest you download the file again. It's possible, though rare, to download an entire file from the Internet and have corruption in the file.
Brian

Un-installing "perl devi kit 7" from Active State

I would like to know if anyone has experience with manual uninstalling the program. I could not find the file in the folder i was pointed to by the email bellow and a i could not find the guide mentioned either.
If anyone knows of a program that searches by time stamp this could make the job easier.
Thanks for the time taken to answer the this question.
This was an email sent to me.
-Thanks for your email. There is a small section at the bottom of the
-installation guide for uninstallation instructions:
-Mac OS X
-Run the following command:
- sudo "/Library/Receipts/Perl Dev Kit.pkg/Contents/Resources/uninstall"

Why not just drag the program to the Trash?

Install Failed for HP Laserjet 1200 Series in new Laptop with Windows 8, 64 Bit

Product Name - HP Laserjet 1200 Series, PCL 6 Driver
Operating System: Windows 8 Home Edition, 64 bit
Error Message : Can't find the 1200 Series on the Network. To locate manually click ok ....
Changes Made - This is an installation on new laptop, running Windows 8, 64 bit
Description:
1. Installing to an existing network, that consistedof a desktop and two wireless laptops.
2. Both Laptops have Windows 7, 64 bit. Above named printer is successfully accessed from the laptops.
3. Am replacing one of the laptops with the Windows 8 64 bit.
4. The Series 1200 path is: Wireless Printer to Router, Router to Desktop via ethernet, Desktop to Printer via cable.
5. The wireless printer configuration is
        Name: HP Laserjet 1200 Series PCL 5
        Port: \\Central\HPLaserj
       Printer: HP Laserjet 1200 Series PCL 5
      Driver: HPMCPM25.GPD   5.8.2008
Problem
Unable to recreate this path with the Windows 8, 64 bit configuration.
a. When I attempt to download a current driver always wind up with a file entitled UPD-pcl6-x64-5.6.0.14430
     This appears to be a universal PCL 6 printer driver, Can successfully unzip the file and create a folder
b. During installation I can see the the desktop printer ICON (name:\\central\HPLaserj); so far, so good
c. Process fails to locate a driver and instructs to manually locate.
d. Browsing to the HP Universal Driver Folders fails because a driver cannot be found .
e. Attempting to manuall enter fails because you cannot input the above address (\\central\HPlaserj). Can only enter HPLaserj for the address, which obviously does not work.
f. When the installation did show a list of drivers, the only one I found was a universal PCL 6, which is what I thought I was trying to download originally.
This set up worked successfully with the Windows 7 64 bit. It appears I need help from a lot more expertise than I have to walk me through this set up.
This question was solved.
View Solution.

Problem Solved.
This link gives a good insight into the solution
http://www.sadjad.net/blog/2012/11/28/windows-8-shared-printer-driver/

Can't install hp photosmart 7350 series printer on my hp laptop with windows 7 home premium

I am trying to install the HP Photosmart 7350 printer on my HP Laptop (serial number {Removed for privacy}; serial number{Removed for privacy}). The driver was not listed so I searched for a compatible printer. I found the Deskjet 5550 was compatible. I downloaded this driver then followed the directions for installing the alternate device. When I selected the Photosmart 7350, I was give the prompt that this device might be harmful to my hard drive. How can I install this printer safely? I do not have a disc with the printer. Do I need to get one or can you give me an alternative.

I also need a printer driver to connect an HP 7350 to a Windows 8.1 laptop.

Can't install J2SE Development Kit on D:\

Hi, I have very limited space on c:\
So, I told the installer to install on D:\
The installer tells me I need 187mb on c:\
I don't want anything installed on c:\
Why does this installer insisit on putting stuff on c:\!
I can't even get started with it. How do I make the installer understand I want to install on D:? I did the change on the first screen, but it still insists I need space on C:\ (where I have 34 meg)
My temp dir is on D:\ as well, so it should not be temporary space.
Frustratedly yours,
Larry

Hi,
I had the same problem, but C: was not even the partition with "Windows" installed.
I simlpy had temporarily freed the required amount of diskspace, JDK installed itself in the correct place. At least I think so. ;-)
Maybe "C:" is hardcoded somewhere in the installer for temporary extraction.
Guessingly yours,
Dangerseeker

I have installed iCloud a number of times on my HP laptop running Windows 7.

I have installed iCloud a number of times on a high powered Windows 7 notebook computer.
It goes through the complete instalation WITHOUT EVER asking me to make an account for icloud with an ID and password for iCloud.
When I try to start icloud for the first time it asks me for my APPLE ID and password. I enter that, and it tells me that is a valid ID and password but it is not for iCloud and therefor refuses to open icloud on the computer for me!.
THERE ARE NO OPTIONS available on that iCloud startup except for the request to enter the Apple ID and password which is then
refused.
I have tried changing and updating the password ...it still refuses to open.It just keeps on telling that is a valid ID and password for Apple but not for the iCloud...I just do not understand what is going on! Thanks for any help or ideas that might get me somewhere with this problem!

Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*http://www.lifehacker.com.au/2012/07/two-excellent-customisable-start-pages-worth-trying-as-igoogle-replacements/

Installing mac os x on an existing dual-booted laptop (with windows/linux)

Hey everybody,
I am wondering if any of you have advice for the best way of going about installing a version of the Mac operating system on my Dell laptop, considering that I already have Windows and Linux (SuSE) in a dual-boot environment, and an Intel Pentium 4-M processor (which I think is x86?)...
I've looked at the Mac store and it looks like OS X Tiger is only for PPC processors. Is there a way to get it to run on my processor?
The reason I am doing this is that I really want to test a website I am developing on Mac browsers, like Safari and IE on Mac, but I can't afford to buy a new Mac system (nor do I really want to, since I use this one computer for everything).
Also, would the Mac installer be able to partition my drive for me automatically?
Thanks!
Stephen

Just make your web site standards compliant and we'll be fine.
The only trouble we'd have is if you started coding your sites chock-full of Microsoft ActiveX garbage.
And don't bother coding your web site to function on IE for Mac. Most Mac users are smart enough to not use a dead web browser which hasn't been supported or updated in years. Microsoft ended its life long ago.

Updated my HP Laptop to Windows 8 and now DVD driver will not work. Help!

I have a Hp Pavilion dv-7013cl Entertainment PC and everything was working perfectly. I updated to Windows 8 about a month ago and had some problems. I then did a clean install of Windows 8 and now all the bugs are fixed except my DVD drive will not work.
I insert a DVD or CD and nothing happens. I go to My Computer and click on it and it just ejects the DVD. I don't know what to do and need my DVD drive.
Also, I tried to go to device manager and reinstall the driver but that didn't help.

Hi Crosby,
Take a look at this document and try the troubleshooting steps. Please let me know if it helps to resolve your issues.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Captivate 8 install hangs at 16%. Tried on multiple enterprise laptops, using windows 7 64Bit. Cannot install Adobe Multi SCO Packager. Any thoughts?

I am trying to install Captivate 8 on our Enterprise laptops. The install will not move pasts 16% and I have tried the install on several laptops. Image is windows 7 64bit. Any suggestions would greatly be appreciated.

Hi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

Java CLDC Emulation (Java ME Dev Kit 3.0) installation problem

Hi,
I tried installing Java CLDC Emulation from Java ME Dev Kit 3.0 to two different devices and Windows Mobile 6 Professional Emulator with mixed results:
- Installation on Sprint phone went fine and I can open 'Sun Java CLDC Emu' from Start->Programs
- Installation on IPAQ110 & Windows Mobile 6 Professional Emulator went fine, however when I try to run it I get the following message:
"The file 'sun_jwc' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file"
I guess it has something to do with version of Windows since phone has Windows Mobile 6.1 Professional and IPAQ&Emulator Windows Mobile 6 Classic.
Can I just install some certificate into trusted store to make this work or Java CLDC Emulation from Java ME Dev Kit 3.0 works only with Windows Mobile 6.1 Professional?
Thanks,
Michael

Try this instructions:
1. Download and install Microsoft Device Emulator with device images for Windows Mobile 6 in "Network" emulator properties tab.
2. Download and install Microsoft Virtual PC.
Note: Installs virtual switch driver required for emulated network adapters.
3. Run Windows Mobile 6 Professional Emulator and bind its emulated NE2000 Network Adapter to a desktop network card.
Note 1: Consult the Microsoft device emulator documentation for instructions.
Note 2: Don't use ActiveSync for networking (cradling the emulator).
4. Write down the IP address of the emulator and the IP address of the host computer.
4.1. Open the Start menu on the emulator, click Settings, click Connections, click Network Cards, Click NE2000 Compatible Ethernet Driver.
4.2. Open Network Connections on the desktop, and display the status of the connection corresponding to the network card to which the NE2000 Network Adapter has been bound (step 3). Click the Support tab.
5. Open Emulator Properties.
5.1. Open the File menu.
5.2. Click Configure.
6. Set JavaMESdkHome\on-device\winmobile-arm as a shared folder in "General" emulator properties tab.
6.1. Browse to JavaMESdkHome\on-device\winmobile-arm.
6.2. Click OK.
7. Run File Explorer on the emulator.
7.1. Open Start menu.
7.2. Click Programs.
7.3. Click File Explorer.
8. Start the Sun Java CLDC Emulation CAB file installation.
8.1. Open Show menu.
8.2. Select Storage Card.
8.3. Click on the sun-java-cldc-emu.cab file.
9. Finish the installation and run the Sun Java CLDC Emulation.
Note: See the device installation for reference.
10. Register the Windows Mobile emulator in the Java ME SDK.
10.1. Open JavaMESdkHome\toolkit-lib\process\device-manager\conf\static-registrations.cfg.
10.2. Add the <device name>, <device ip>, <host ip> line into the file and save the changes (use the IP addresses from step 4).
As instance: MS_Emulator, 192.168.1.2, 192.168.1.1
11. Restart the Java ME SDK Device Manager.

Installed j2se on windows xp, updated path, but can't find compiler

I installed j2se on windows xp, updated path, but no matter what direc-
tory I try, when I try to compile(javac) I get the "'javac' is not
recognized as an internal or external command, operable program or batch
file" message. This even happens in the C:\program files\java\j2re1.4_01\bin directory! Anybody know what's up?

j2re (run-time env) does not have javac. I ran into same problem with
sdk -- j2se. I invoke following commands if invoking java commands
from DOS cmd.exe window. (You can move these commands in a 'bat' file'.)
@echo off
set JAVA_HOME=c:\jdk1.3.1_06 -- where you installed j2se
set PATH=%JAVA_HOME%\bin;%PATH%

Error while installing J2SE 5.0 update 6

i got the following error msg while installing J2SE 5.0 update 6
Error 1722. There is a problem with this windows installer package. A program run as part of the setup did not finish as expected . contact your support personnel or package vendor.

And from the Installation Notes:
Choosing an installation path containing characters that are not part of the system code page - On Windows 2000, XP, and 2003, it is possible to name directories using characters that are not part of the system locale's code page. If such a directory is part of the installation path, then error 1722 occurs, and installation is not completed.
To prevent this problem, make sure that the user and system locales are identical, and that the installation path only contains characters that are part of the system locale's code page. User and system locales can be set in the Regional Options or Regional Settings control panel.
The associated bug number is 4895647.

AIR for TV Dev Kit stuck on 2.5?

Is it possible to upgrade the AIR for TV dev kits given away at MAX 2010?
In general, I'm not finding a whole lot on building AIR applications for TV. I do see emulated tv remote control buttons when adding this application descriptor tag to a Flex 4.5 project
<supportedProfiles>tv</supportedProfiles>
Once I compile my application for release as an .airi file it installs on the dev kit but the app instantly halts without doing what it does in the desktop emulated debugger.
I think I need to update the dev kit with AIR 2.6 but not sure how to do that or if it is even possible?
I guess I will try and put an AIR 2.5 sdk on my laptop or something and try to build it that way for now...

I found this in my notes so I thought I'd post it here in case someone else is searching for this...
UPGRADE THE AIR FOR TV SYSTEM SOFTWARE ON THE ADOBE AIR FOR TV MAX 2010 HARDWARE DEVICE
You'll need to obtain and install the latest version of Adobe AIR for TV system software so you can be sure your development is based on the most up to date technology from Adobe
The latest version of Adobe AIR for TV system software is available from http://www.adobe.com/go/airtvinstaller
Adobe may regularly update the software at either this location or at http://prerelease.adobe.com
If you wish to receive email notifications of Adobe AIR for TV system software updates, send an email to [email protected]
Download the file with a name similar to 'stagecraft--2.5.0.1804.20100928--bcm--max2010--release--installer.bin' from http://www.adobe.com/go/airtvinstaller to your computer. The name of the Adobe AIR for TV software installer file will likely be slightly different from the one shown here, since it will contain the current version number. Once it has downloaded, rename the file 'installer.bin' NOTE: You may want to save an extra copy of the new AIR for TV system software file before you rename it.
Place the file 'installer.bin' at the root of a USB flash drive. NOTE: The Adobe MAX 2010 AIR for TV Development Kit does not include a USB flash drive, so you will need to provide your own.
Turn off the Adobe AIR for TV unit using the switch on the surge protector.
Insert the USB flash drive into the USB port on the back of the Adobe AIR for TV unit.
Turn the unit back on using the switch on the surge protector and wait a moment or two. The system software will automatically install from the USB flash drive to the AIR for TV unit. When it is complete, your TV screen should display the Adobe AIR splash screen followed by a welcome note that instructs you to take the USB flash drive out of the AIR for TV device.
Turn off the unit and remove the USB flash drive.
Turn the unit back on. In a moment, you will see the Adobe AIR for TV splash screen followed by the App Launcher. Use the unit's remote control to navigate to the DevMaster application and open it. You will see the AIR for TV version number, which should be the same as the version number in the AIR for TV installer file you downloaded in Step 1. This will confirm that you are now running the latest version of Adobe AIR for TV system software. You can also find the version number in the About AIR for TV tab of the App Market. You're now ready to run AIR applications on AIR for TV.

Installing SAP Integration Kit on BO Cluster

Hello Gurus,
I have a Business Objects Cluster with 2 servers, On the first server SAP Integration Kit was installed and configured and working as expected.
when i installed BO XI on second server and clusterd it to Server 1 , It went fine and working good.
when i tried to install SAP integartion KIT on server 2, installation goes succesfull, as soon as SAP Integration kit installed, BO XI is not working .
When i opened the CMC link, it says TOM cat is down and error with platformservices.
Gurus,
Could some one please let me know how SAP integartion kit will be configured on Clustered BO environment.
Thanks & Regards
Prashanth

Hi,
The instllation of SAP Integrtion Kit updates the PlaformServices application and you can face such issues if there was any problem with the update of this application on the second server installation.
Copying the warfiles from the working server and deploying it on the tomcat should solve this issue.
Regards,
Ramu.

Failure installing J2SE Dev Kit 5.0 update 3 on laptop w/ Windows XP SP 1

Similar Messages

Maybe you are looking for