Failure: "load.c", line 4537

I'm working with LabVIEW version 5.1.1 (very old version I know). I'm working on a very large
LabVIEW VI. When I made my most recent changes and tried to save them, LabVIEW generated the
following error message:
Failure: "load.c", line 4537
LabVIEW version 5.1.1
For assistance in resolving this problem, please record the preceding information and navigate
to www.ni.com/failure, or contact National Instruments.
Searching for help at the indicated web site did not provide any information and I know that
NI is no longer providing support for version 5.1.1. Has anybody seen this problem and know
what it means? I think I've basically made the application too large and LabVIEW crashes when
it tries to save it.

How big is your actual program? Have you checked to make sure that each subvi works in its own right? You could always try mass compiling and see if that takes care of it, but you might want to try some things to conserve memory, like using more subvi's or calling subvi's by reference.

Similar Messages

Failure : "load.cpp", line 4081

My main front panel VI will no longer open and I just get the error, Failure : "load.cpp", line 4081.
I am running an Eval version of 6.0.1 and was deciding whether to buy this product for a new project.
Given that I see from this forum that this error has been known for 9 months plus and I've lost a weeks
work I am not so sure.
It occured after I added some tab controls to the front panel, so beware.

Hi RCT,
This error occurs in LV 6.0.1. It seems that it is fixed in LV 6.0.2 and LV 6.1.
One thing you can do is ask NI to delete the insane objects for you. You have to redo your work you have done since the time the VI was correct until it got corrupt.
The other thing you can do is use a copy from a backup and redo the rest of the work.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Failure load.cpp line 4835 VI runs ok in 6i will not load in 6.1

I have created a rather complex instrument interface in 6i and it works fine. I have recently upgraded to 6.1 professional; the VI will not load and an internal failure occurs in load.cpp on line 4835. Is this a bug, or did I do something incorrect? I tried to do a mass compile, but this fails also. The load seems to have problems with a specific VI, so I removed this VI and was able to load by cancelling attempts to locate. I have tried to re-link the problem VI, rebuild the problem VI in 6.1, modify the diagram so that the problem VI is not used/referenced; none of these worked. Labview generally would crash when I save after making the aforementioned modifications. Note: the problem VIs consist of a globa
l variable, and a case VI that uses the same global variable.
I hope that this information is complete enough to point to a solution. Thank You,
Howard Havlicsek, Acutronic

This is typically a result of having more than 555 controls/indicators on
a front panel. A workaround is to place controls/indicators into clusters
since each cluster only counts as a single UI object. Do this until you
get below the 555 limit. A better ideal in most cases is that you don't
need that many indicators on the front panel where a user has to try and
figure out what he should be looking at. If they are not used often move
them into subVIs and display the subVI front panels as needed.
If this doesn't appear to be the cause of your load.cpp error I would
contact NI tech support at ni.com/ask.
Marcus Monroe

Failure : load.cpp in line 4081

I'm working in a new application demo. Yesterday i saved it normally, but today when i tried to open gives me this failure message:
"Failure : load.cpp in line 4081"
I need to recover the file, because i don´t have any backups.
Thank you in advance, regards.
Fede

On Tue, 12 Nov 2002 12:58:08 -0600 (CST), Fede2002 wrote:
>I'm working in a new application demo. Yesterday i saved it normally,
>but today when i tried to open gives me this failure message:
>"Failure : load.cpp in line 4081"
>
>I need to recover the file, because i don=B4t have any backups.
>
I had the same error changing video resolution (developed both in
1280x1024 and 1024x768).
The error has gone returning to the higher resolution.
Try It & let us know! :-)
Bye!
http:\\www.depquest.net

Labview version 6.1 failure:"linker.cpp", line 2302

I have the labview version 6.1 failure:"linker.cpp", line 2302 fault.
Does any one can help me please ?
Solved!
Go to Solution.

Actually HeapPeak existed as far back as LabVIEW 4 or maybe even 3. However it is not usually helpful for linker errors as that is something in the LabVIEW compiler itself. HeapPeak can be sort of useful for Insane errors to locate the element that the compiler considers insane (and consequently delete and/or rewire it).
If this is a recent error on a VI that used to work before, it is most likely related to a corruption to the VI and the best course of action is to replace the VI from a backup (source code revision control would be a great advantage here). If it is something where no previous (working) state is known about, then it is going to be a tough cookie. This version is 14 years old and eventhough I still have some installation of that version somewhere it is several years ago that I started that up for more than some accidential reasons. I'm pretty sure NI would need to do some archeological work nowadays to come up with a system they could use to replicate such an error and the OP would need to be a pretty high profile customer that they would go through that sort of effort.
Maybe it is related to this error. It is the closest available in the publically accessible list of errors. A complete recompile of the entire source code tree is definitely one of the first actions to try. It may fix the problem or run into even more errors that could maybe point into a more specific location. Upgrading to a more recent LabVIEW version is another possibility although hampererd by the fact that the currently shipping version isn't officially supporting XP anymore and that the Vision software is one piece of software that underwent serious changes in the course of time and an update from 6.1 to the most recent version is most likely not a seamless operation.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Failure : "resource.cpp", line 2477

When building an application on LABVIEW 6.1 on Window 98, I get the error message:"Failure : "resource.cpp", line 2477". Attached is my Labview failure log file
Attachments:
LabVIEW_Failure_Log.txt ‏1 KB

Hi Kluu,
This error appears when checking the "Do not compress target file" option when building an application. The workaround is to not check that option in Application Builder.
While in the application builder, in the "Target" tab, in "Build Options", do NOT check the "Do not Compress Target File" option.
We are currently looking into this and will soon be fixing it up.
Hope this helps.
Regards,
Pravin Borade
Applications Engineer, National Instruments

Failure: "might.cpp" line 815 on LabVIEW executable

Hi,
I have a program written in LabVIEW 6.1 on a Windows XP platform. The program includes an ActiveX container that shows an Internet Explorer content window (just like the "Using the Microsoft Web Browser ActiveX Control" example found on http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B123AE0CB9BF111EE034080020E74861&p_node=DZ52051&p_submitted=N&p_rank=&p_answer=&p_source=External
, but without the activex queue in that example).
After I built the executable, I was able to run the exectuable on the development machine without problem. However when my client runs it on his PC with LabVIEW runtime engine 6.1 installed, he gets the message:
Failure: "might.cpp" line 815
For assistance in reso
lving this problem, please record the procedeing information and navigate to www.ni.com/failure or contact national insturments.
I cannot find any information on might.cpp on the NI support site. Any idea of what can be done to fix this problem?
Thanks!
Dan

Hi dan,
you must contact NI support sending them the problem. "might.cpp" is a source module of LV and they can investigate the error.
Another thing you have to take into account is that LV stores the class ID and not the application. Has the client PC the same MS IE version installed? If not, the error could also result from different versions of the Active-X control.
As with the reporting Toolkit for MS Office you have to build a different version of your app for each different version of the control.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Error, we detected a failure loading the advertisement for you to complete BrandBoost. Please disable any ad blockers and try again.

Error
We detected a failure loading the advertisement for you to complete BrandBoost. Please disable any ad blockers and try again.
I was playing Family Feud on Facebook)
How do I disable any blockers.

Despite the message does the site work? If so I'd ignore the messages. From the name of the site, perhaps you want to see the advertisements.
The most popular adblocking is the "Adblock Plus" extension which you can disable with the "ADP" toolbar button or in the extensions options in Tools -> Addons -> extensions.
Adblock Plus - Open blockable items list - Ctrl+Shift+V (right click on icon) shows all the urls on a page and if blocked by a filter shows the filter
* http://img213.imageshack.us/i/2010020591647pm.png/
* http://img651.imageshack.us/i/adpblockableitems.png/

Failure: scalesup.cpp line 767

Hi,
My vi is crashing and giving me the error message:
Failure: scalesup.cpp line 767
I have isolated the problem, and it occurs at a waveform graph property node. I have the property node set for Xscale.Markervals[ ] . I'm trying to create a set of custom markers by sending a 1D dbl array to the property node. This custom marker array is the same length as the data array (600 points).
Thanks for your help in advance.

Are you using a logrithmic scale? If so, then make sure that the value of one of the markers is not zero.
If not, then what version of LabVIEW are you running? Can you take your data and create a simple VI that das that data aas the default in an array and then plots it to a graph and then does the property node? This should be pretty easy to set up so that we can reproduce this issue.
Also, bug reports such as this one are normally handled better in an e-mail or phone support request.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

Failure loading native JDBC driver

When i go into sql developer and try to create a connection for oracle using TNS connection identifier i get a failure loading native JDBC driver. any ideas?
thanks
m

Can you create a basic connection? Which platform are you on? What version of sqldev are you running? What version of JDK do you have?
K.

Assertion failure: pRoot at line 107

I guys, I'm having problems.. Someone can help me please?!
This error appeared 2 weeks ago, before this I had changed some security privilegies on catalog manager. Then, I thought that error was becouse of the changes that I made for. But it was not. Why was not? Cause I deleted the catalog(metadata folder) and I created another start. Why I did that? Cause I thought that error was cause for some changes that I did. Then I started another catalog, with new reports, new security roles and the error persist.
PS.: The RPD is the same.
Error:
Type: Error
Severity: 30
Time: Tue Nov 30 18:48:39 2010
File: project/webxml/xmldocument.cpp Line: 107
Properties: ThreadID-5832;HttpCommand-ReloadDashboard;Proxy-750129;RemoteIP-172.20.0.2;User-750129;HttpArgs-InFrameset='false',Caller='Dashboard',Embed='true',icharset='utf-8',ViewState='p4ebtdld98ugskl9i4kleog9fi',saveLangPref='true',reloadTargets='d:dashboard~p:ck7j8ndot74tso41~r:3vsqlcks5vv851l0',PortalPath='/shared/ATLASBIEE/_portal/Indicador de Informa��',Page='R01',ajaxType='iframe',_scid='mykNLlsZhtg';Impersonator-
Location:
saw.httpserver.request
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadPool
saw.threads
Assertion failure: pRoot at line 107 of ./project/webxml/xmldocument.cpp

Where are the GURUS ?!?!?!?!?
Regards,
Guilherme.

Using the Metadata Loader Command Line Utility

Hi ,
Can anybody please let me know the steps involved for import and export of metadata uing the Metadata Loader Command Line Utility with small scripts as an example.
Thanks in advance.
Vinay

I'll assume that command line utility = ombplus...
using OMBPLUS, Here it is:
OMBCONNECT my_user/My_password@host:port:SID
OMBEXPORT TO MDL_FILE 'C:/temp/DELTA_RS52_LICC2.mdl' \
FROM PROJECT 'NEW_ARCHITECTURE' \
COMPONENTS ( \
LOCATION 'TRG_NEW_ARCH_WORKAREA_LOC',\
CONNECTOR 'TRG_WORKAREA_LIBOWNER_CONNECT', \
ORACLE_MODULE 'TRG_WHOWNER', \
TABLE 'CPF_VALID3', \
TABLE 'CPF_VALID3_2', \
TABLE 'CPF_VALID3_3', \
TABLE 'CPF_VALID3_4', \
MAPPING 'MAP_WA_CLAIM_DIM', \
MAPPING 'MAP_WA_POLICY_DIM2_INS', \
MAPPING 'MAP_WDC1_CLIENT_FOR_LIB', \
FUNCTION 'UPD_WDC1_CLIENT_LIB', \
FUNCTION 'VALIDATE_CHARGED_PREMIUM_1_F', \
FUNCTION 'VALIDATE_CHARGED_PREMIUM_2_F', \
FUNCTION 'VALIDATE_CHARGED_PREMIUM_3_F', \
FUNCTION 'VALIDATE_WA_DRIVER_VEH_FACT_I', \
PACKAGE 'INITIALIZATION', \
ORACLE_MODULE 'TRG_WORKAREA', \
TABLE 'AUPMGEN', \
TABLE 'AUPMGEN_TR0', \
TABLE 'WDC1_CLIENT_LICC', \
TABLE 'WDC1_CLIENT_LICC_TEMP_UPD', \
TABLE 'WG_CHARGED_PREMIUM_VALID', \
FUNCTION 'GET_DT_TRX_TRANSACTION', \
FUNCTION 'GET_OCC_OP_LKP', \
PROCEDURE 'DISABLE_ENABLE_CONSTRAINTS', \
PROCEDURE 'EXEC_WF_CPF_VALIDATIONS', \
PROCEDURE 'EXEC_WF_DAUTO_DAILY', \
PROCEDURE 'EXEC_WF_PER_GENDAT_DAILY', \
PROCEDURE 'EXEC_WF_PER_GENTER_DAUTO', \
PROCEDURE 'LOAD_PAST_FUTURE_CALENDAR', \
PROCEDURE 'VALIDATE_CHARGED_PREMIUM_DS', \
MAPPING 'MAP_AUPMCON_LIB', \
MAPPING 'MAP_AUPMGEN_LIB', \
MAPPING 'MAP_AUPMGEN_LIB_CPF', \
MAPPING 'MAP_AUPMGEN_TR', \
MAPPING 'MAP_AUPMGEN_TR0', \
MAPPING 'MAP_AUPMGEN_TR0_CPF', \
MAPPING 'MAP_AUPMGEN_TR0_CPF_PERF', \
MAPPING 'MAP_AUPMGEN_TR_CPF_PERF', \
MAPPING 'MAP_AUPMVEH_LIB', \
MAPPING 'MAP_AUPMVEH_LIB_CPF', \
MAPPING 'MAP_CHARGED_PREMIUM_FACT_TR1', \
MAPPING 'MAP_IA_POLICY_TERM_LKP_2', \
MAPPING 'MAP_SA_POLICY_SALES_CHAN_LIB', \
MAPPING 'MAP_SIPGED_DAILY_2_LIB', \
MAPPING 'MAP_SIPGED_LIB', \
MAPPING 'MAP_SIPGED_TR', \
MAPPING 'MAP_SIPRES_LIB', \
MAPPING 'MAP_SIPVES_LIB', \
MAPPING 'MAP_WA_CLAIM_FACT_TR1', \
MAPPING 'MAP_WA_DRIV_VEH_FACT_TR1', \
MAPPING 'MAP_WDC1_CLIENT_LIB', \
MAPPING 'MAP_WDC1_CLIENT_LICC_LAST_VERS', \
PROCESS_FLOW_MODULE 'NEW_ARCH_WF', \
PROCESS_FLOW_PACKAGE 'DAUTO', \
PROCESS_FLOW_PACKAGE 'WAUTO') \
OUTPUT LOG TO 'C:/TEMP/DELTA_RS52_LICC2_exp.log'
#now to import,still with OMBPLUS,
OMBCONNECT my_user/My_password@host:port:SID
OMBIMPORT MDL_FILE 'C:/temp/DELTA_RS52_LICC2.mdl' USE UPDATE_MODE OUTPUT LOG TO 'C:/temp/DELTA_RS52_LICC2_imp.log'
Hope this is what you wanted
Michel

Failure load.cpp 4081(labview 6.0.1)???????????????

failure load.cpp 4081(labview 6.0.1)???????????????
i work on only one project and this happens from time to time but its boring.i even cant find the logic of the apearing.

This sounds like one of the errors that was fixed in the LabVIEW 6.0.2 update.
I suggest you try loading the update.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

I have the error: "failure: datasupp.c line 531" with LabView 5.1.1. Why?

I have the error: "failure: datasupp.c line 531" with LabView 5.1.1. Why?
I use WIN 2000.

Srieng,
The datasupp.c failure can be caused by several reasons, we will need a detailed description of the operation you were making before this error happened, what is inside the VI that gave you this error, has this VI worked before, etc. Please contact us with this information, you can find the steps to email us at www.ni.com/ask , please do so and we'll review the details you send to us to determine the causes and probable workaround. Thanks!...
Nestor Sanchez
Applications Engineer
National Instruments
Nestor
National Instruments

Jfmerge: [240]Failure loading colour palette from form file.

Hi All,
I need your help. I am new to JetForm and have to use it because of my work. Recently I have been assigned a task which is to amend an existing form, however, when I opened it with the JetForm Designer, it prompted me with message #4043 with following information:
The current settings for Symbol Set handling are different
from when the form was last saved.
Form: Convert is Yes,950,950
Current: Convert is Yes,1252,850
I skipped the warning message and just compile the MDF file directly without any changes. Then, I just got the "jfmerge: [240]Failure loading colour palette from form file." error message during the printing process. May I know how could I fix it? Please help and advise.
Thanks,
Charoite

Hello,
I have exactly same problem than you while opening an existing .ifd file :
The current settings for Symbol Set handling are different from when the template was last saved.
Template : Convert is No,936,850
Current : Convert is N0,1252,850
I suppose it is due to chinese characters (Simsun font) bad installed on my desktop, but it is only hypothesis.
Did you achieve to avoid this message since 05/2011 ?

Failure: "load.c", line 4537

Similar Messages

Maybe you are looking for