Failure load.cpp 4081(labview 6.0.1)???????????????

failure load.cpp 4081(labview 6.0.1)???????????????
i work on only one project and this happens from time to time but its boring.i even cant find the logic of the apearing.

This sounds like one of the errors that was fixed in the LabVIEW 6.0.2 update.
I suggest you try loading the update.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

Failure : "load.cpp", line 4081

My main front panel VI will no longer open and I just get the error, Failure : "load.cpp", line 4081.
I am running an Eval version of 6.0.1 and was deciding whether to buy this product for a new project.
Given that I see from this forum that this error has been known for 9 months plus and I've lost a weeks
work I am not so sure.
It occured after I added some tab controls to the front panel, so beware.

Hi RCT,
This error occurs in LV 6.0.1. It seems that it is fixed in LV 6.0.2 and LV 6.1.
One thing you can do is ask NI to delete the insane objects for you. You have to redo your work you have done since the time the VI was correct until it got corrupt.
The other thing you can do is use a copy from a backup and redo the rest of the work.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Failure : load.cpp in line 4081

I'm working in a new application demo. Yesterday i saved it normally, but today when i tried to open gives me this failure message:
"Failure : load.cpp in line 4081"
I need to recover the file, because i don´t have any backups.
Thank you in advance, regards.
Fede

On Tue, 12 Nov 2002 12:58:08 -0600 (CST), Fede2002 wrote:
>I'm working in a new application demo. Yesterday i saved it normally,
>but today when i tried to open gives me this failure message:
>"Failure : load.cpp in line 4081"
>
>I need to recover the file, because i don=B4t have any backups.
>
I had the same error changing video resolution (developed both in
1280x1024 and 1024x768).
The error has gone returning to the higher resolution.
Try It & let us know! :-)
Bye!
http:\\www.depquest.net

Failure load.cpp line 4835 VI runs ok in 6i will not load in 6.1

I have created a rather complex instrument interface in 6i and it works fine. I have recently upgraded to 6.1 professional; the VI will not load and an internal failure occurs in load.cpp on line 4835. Is this a bug, or did I do something incorrect? I tried to do a mass compile, but this fails also. The load seems to have problems with a specific VI, so I removed this VI and was able to load by cancelling attempts to locate. I have tried to re-link the problem VI, rebuild the problem VI in 6.1, modify the diagram so that the problem VI is not used/referenced; none of these worked. Labview generally would crash when I save after making the aforementioned modifications. Note: the problem VIs consist of a globa
l variable, and a case VI that uses the same global variable.
I hope that this information is complete enough to point to a solution. Thank You,
Howard Havlicsek, Acutronic

This is typically a result of having more than 555 controls/indicators on
a front panel. A workaround is to place controls/indicators into clusters
since each cluster only counts as a single UI object. Do this until you
get below the 555 limit. A better ideal in most cases is that you don't
need that many indicators on the front panel where a user has to try and
figure out what he should be looking at. If they are not used often move
them into subVIs and display the subVI front panels as needed.
If this doesn't appear to be the cause of your load.cpp error I would
contact NI tech support at ni.com/ask.
Marcus Monroe

Failure load.cpp

what i have to do for solve this problem? i don't understant why this problem occur because i'm only save the vi and when i try to open another time, this message appear: failure at load.cpp in line 4081..

tllorca,
We have had a few other reports of this issue. Our R&D department is looking into this issue, but no time frame is available for a solution at this time.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

Load.cpp error

i fail to run my VI and it shows load.cpp line:4081 failure. what happen?

There are number of threads on this error. Here are some:
Failure : "load.cpp", line 4081
Failure : load.cpp in line 4081
failure at load.cpp in line 4081
Is
there a fix yet for error load.cpp line 4081?
They all happen when you try to open in LabVIEW 6.1 a VI, that has some tab controls on its front panel, and that was developed in the student or evaluation edition version 6i.
If you send me the VI that causes the error, I may be able to recover it. You can either post it here, or send it to [email protected]
Zvezdana S.
National Instruments

Labview version 6.1 failure:"linker.cpp", line 2302

I have the labview version 6.1 failure:"linker.cpp", line 2302 fault.
Does any one can help me please ?
Solved!
Go to Solution.

Actually HeapPeak existed as far back as LabVIEW 4 or maybe even 3. However it is not usually helpful for linker errors as that is something in the LabVIEW compiler itself. HeapPeak can be sort of useful for Insane errors to locate the element that the compiler considers insane (and consequently delete and/or rewire it).
If this is a recent error on a VI that used to work before, it is most likely related to a corruption to the VI and the best course of action is to replace the VI from a backup (source code revision control would be a great advantage here). If it is something where no previous (working) state is known about, then it is going to be a tough cookie. This version is 14 years old and eventhough I still have some installation of that version somewhere it is several years ago that I started that up for more than some accidential reasons. I'm pretty sure NI would need to do some archeological work nowadays to come up with a system they could use to replicate such an error and the OP would need to be a pretty high profile customer that they would go through that sort of effort.
Maybe it is related to this error. It is the closest available in the publically accessible list of errors. A complete recompile of the entire source code tree is definitely one of the first actions to try. It may fix the problem or run into even more errors that could maybe point into a more specific location. Upgrading to a more recent LabVIEW version is another possibility although hampererd by the fact that the currently shipping version isn't officially supporting XP anymore and that the Vision software is one piece of software that underwent serious changes in the course of time and an update from 6.1 to the most recent version is most likely not a seamless operation.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Failure: "might.cpp" line 815 on LabVIEW executable

Hi,
I have a program written in LabVIEW 6.1 on a Windows XP platform. The program includes an ActiveX container that shows an Internet Explorer content window (just like the "Using the Microsoft Web Browser ActiveX Control" example found on http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B123AE0CB9BF111EE034080020E74861&p_node=DZ52051&p_submitted=N&p_rank=&p_answer=&p_source=External
, but without the activex queue in that example).
After I built the executable, I was able to run the exectuable on the development machine without problem. However when my client runs it on his PC with LabVIEW runtime engine 6.1 installed, he gets the message:
Failure: "might.cpp" line 815
For assistance in reso
lving this problem, please record the procedeing information and navigate to www.ni.com/failure or contact national insturments.
I cannot find any information on might.cpp on the NI support site. Any idea of what can be done to fix this problem?
Thanks!
Dan

Hi dan,
you must contact NI support sending them the problem. "might.cpp" is a source module of LV and they can investigate the error.
Another thing you have to take into account is that LV stores the class ID and not the application. Has the client PC the same MS IE version installed? If not, the error could also result from different versions of the Active-X control.
As with the reporting Toolkit for MS Office you have to build a different version of your app for each different version of the control.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Failure: "image.cpp", error 11602

I'm developing an application in LabView and with the Web publishing tool I can visualizethe results in Internet. The problem is that I open the explorer (Netscape or Internet Explorer) the following message appears in the screen: "Failure, "image.cpp", error 11602, please contact with NI" and the explorer is close... It's labview 6.1

eddie wrote:
>
> I'm developing an application in LabView and with the Web publishing
> tool I can visualizethe results in Internet. The problem is that I
> open the explorer (Netscape or Internet Explorer) the following
> message appears in the screen: "Failure, "image.cpp", error 11602,
> please contact with NI" and the explorer is close... It's labview 6.1
A good general starting point is www.ni.com/failure . Worth looking at
the specific tips (if any) for this error, and the general tips.
Mark

Failure : "resource.cpp", line 2477

When building an application on LABVIEW 6.1 on Window 98, I get the error message:"Failure : "resource.cpp", line 2477". Attached is my Labview failure log file
Attachments:
LabVIEW_Failure_Log.txt ‏1 KB

Hi Kluu,
This error appears when checking the "Do not compress target file" option when building an application. The workaround is to not check that option in Application Builder.
While in the application builder, in the "Target" tab, in "Build Options", do NOT check the "Do not Compress Target File" option.
We are currently looking into this and will soon be fixing it up.
Hope this helps.
Regards,
Pravin Borade
Applications Engineer, National Instruments

Failure: scalesup.cpp line 767

Hi,
My vi is crashing and giving me the error message:
Failure: scalesup.cpp line 767
I have isolated the problem, and it occurs at a waveform graph property node. I have the property node set for Xscale.Markervals[ ] . I'm trying to create a set of custom markers by sending a 1D dbl array to the property node. This custom marker array is the same length as the data array (600 points).
Thanks for your help in advance.

Are you using a logrithmic scale? If so, then make sure that the value of one of the markers is not zero.
If not, then what version of LabVIEW are you running? Can you take your data and create a simple VI that das that data aas the default in an array and then plots it to a graph and then does the property node? This should be pretty easy to set up so that we can reproduce this issue.
Also, bug reports such as this one are normally handled better in an e-mail or phone support request.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

SOS:How to solve "internal fatal error:load.cpp line6345"?

hello,everybody. now i meet with a sharp problem in labview. when i try to save a .vi file in labview, sometimes an error information will happen which is "internal fatal error:"load.cpp", line6345". i have tried almost every way to solve this problem but falied at last.
Can you tell me how to solve this problem? thank u all!

beryllan;
Let us know which version of LabVIEW you are using. After a quick search in here at the Discussion Forums, I found that problems with load.cpp were common in LabVIEW 6, (with special mentions to the Student Edition). If that's your case, try updating LabVIEW here.
Regards
Enrique
www.vartortech.com

Failure: "load.c", line 4537

I'm working with LabVIEW version 5.1.1 (very old version I know). I'm working on a very large
LabVIEW VI. When I made my most recent changes and tried to save them, LabVIEW generated the
following error message:
Failure: "load.c", line 4537
LabVIEW version 5.1.1
For assistance in resolving this problem, please record the preceding information and navigate
to www.ni.com/failure, or contact National Instruments.
Searching for help at the indicated web site did not provide any information and I know that
NI is no longer providing support for version 5.1.1. Has anybody seen this problem and know
what it means? I think I've basically made the application too large and LabVIEW crashes when
it tries to save it.

How big is your actual program? Have you checked to make sure that each subvi works in its own right? You could always try mass compiling and see if that takes care of it, but you might want to try some things to conserve memory, like using more subvi's or calling subvi's by reference.

Teststand error states that a vi failed to load in the Labview Run-Time Engine

I am getting an error in teststand that states that a vi failed to load in the Labview Run-Time Engine version '14.0.1'
If I look at the software loaded on my system with the NI Measurement and Automation Explorer I have Labview Run Time engines for version 2009, 2010, 2011, 2012, 2013, & 2014 on my system.
How do I get this VI to run on this system when it is called by test Stand?
Thank you

The RTE 14.0 was loaded as part of my deployment and after I ran this I got an update notice for the F1 patch which I also loaded.
I do not have labview loaded on this system, only the run time engines from running my deployment.
When I launch t he teststand sequence, when it calls the labview VI, I get the following error moessage:
Error: Failed to load VI 'C:\builds\RelayVoltageMeaure.vi' in the LabVIEW Run-Time Engine version '14.0.1'. LabVIEW: The VI is not executable. This error may occur because the VI is either broken or contains a subVI that LabVIEW cannot locate. Select File>>Open to open the VI and verify that you can run it. VI Path: C:\builds\RelayVoltageMeaure.vi[Error Code: -17600, Failed to load a required step's associated module. ]
I have attached the teststand sequence if this helps.
Thanks
Attachments:
QuantumDigitalBd.seq ‏13 KB

How to make load simulator using labview 2010

i want to ask how to make load simulator using labview?
Solved!
Go to Solution.

what have you tried so far? and exactly what is it your tying to do?
Please remember to accept any solutions and give kudos, Thanks
LV 8.6.1, LV2010,LV2011SP1, FPGA, Win7

Failure load.cpp 4081(labview 6.0.1)???????????????

Similar Messages

Maybe you are looking for