Failure of flar install on X2100 M1

See this error during flar install. Flar created on X2200 M2, install carried out on X2100 M1. Any ideas? The original install was Entire rather than Entire+OEM but I don't think the problem seems caused by a disparity in peripheral devices.
Error: ./cleanup-scn-base: syntax error at line 34: `;;' unexpected
Error:
Error: ERROR: Error while processing custom script - cd /tmp/flash_tmp/postdeployment;./cleanup-scn-base
Error:
Error: ERROR: Postdeployment processing failure
Error:
Error: ERROR: Flash installation failed
Pfinstall failed. Exit stat= java.lang.UNIXProcess@1c21ece 2I've examined the script at /usr/lib/scn/bin/cleanup-scn-base and cannot see a cause for the 'syntax error'. I suppose it could be corrupted in the flar...?
This occurs after Verifying disk configuration
Verifying space allocation
Configuring disk (c1d0)
- Creating Fdisk partition table ...
Creating and checking UFS file systems ...
Beginning Flash archive processing
Extracting archive: ...
Extraction completeMessage was edited by:
qu1j0t3

How bizarre. I suspect this is as as a result of the hard disk replacement (following loss of data) which has created a catalogue of problems for me (including even more lost data). Don't know whether due to my incompetence or the company that replaced the disk.
I can't access the download (PSE8) to the former administrator as the new administrator.....

Similar Messages

Root.sh failure during Grid install - segmentation fault for clscfg

Hi anyone got any idea how to resolve the following error during execution of root.sh on second node of a RAC installation. I see there is a failure when clscfg -localadd is run - perhaps this is the start of the issue. I have no idea what this command is doing
Any help appreciated
Installing verison 11.2.0.2 on RHEL 5
ntpd was NOT running - I ignored this during the pre-reqs at the end of the runInstaller - perhaps this is the issue and i need to start fresh and make sure its running before running root.sh ?
root.sh....
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /opt/app/11.2.0/grid/crs/install/crsconfig_params
Failure with signal 11 from command: 1 /opt/app/11.2.0/grid/bin/clscfg -localadd
OLR initialization - successful
Adding daemon to inittab
ACFS-9200: Supported
ACFS-9300: ADVM/ACFS distribution files found.
ACFS-9307: Installing requested ADVM/ACFS software.
ACFS-9308: Loading installed ADVM/ACFS drivers.
ACFS-9321: Creating udev for ADVM/ACFS.
ACFS-9323: Creating module dependencies - this may take some time.
ACFS-9327: Verifying ADVM/ACFS devices.
ACFS-9309: ADVM/ACFS installation correctness verified.
CRS-2672: Attempting to start 'ora.mdnsd' on 'coden-ota-odc'
CRS-2676: Start of 'ora.mdnsd' on 'coden-ota-odc' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'coden-ota-odc'
CRS-2676: Start of 'ora.gpnpd' on 'coden-ota-odc' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'coden-ota-odc'
CRS-2672: Attempting to start 'ora.gipcd' on 'coden-ota-odc'
CRS-2676: Start of 'ora.cssdmonitor' on 'coden-ota-odc' succeeded
CRS-2676: Start of 'ora.gipcd' on 'coden-ota-odc' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'coden-ota-odc'
CRS-2672: Attempting to start 'ora.diskmon' on 'coden-ota-odc'
CRS-2676: Start of 'ora.diskmon' on 'coden-ota-odc' succeeded
CRS-2676: Start of 'ora.cssd' on 'coden-ota-odc' succeeded
Start of resource "ora.ctssd" failed
CRS-2672: Attempting to start 'ora.ctssd' on 'coden-ota-odc'
CRS-2674: Start of 'ora.ctssd' on 'coden-ota-odc' failed
CRS-4000: Command Start failed, or completed with errors.
Cluster Time Synchronisation Service start in exclusive mode failed at /opt/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 6455.
/opt/app/11.2.0/grid/perl/bin/perl -I/opt/app/11.2.0/grid/perl/lib -I/opt/app/11.2.0/grid/crs/install /opt/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
I executed the /opt/app/11.2.0/grid/bin/clscfg to see what the result was and it returns a Segmentation Fault to std err
Edited by: 787789 on Nov 10, 2010 6:58 AM

Hi,
here is one document you can go for work around but it is on windows platform but similar error as you posted *CRS Installation Failed with "failed to configure Oracle Cluster Registry with CLSCFG, ret 9" [ID 851742.1]*
Thanks

Hard Drive Failure After Leopard Install Attempt

Ok - so here's what up...
Got a MacBook. Got Leopard. Tried to install. It froze. Log said there was some error, didn't think much of it and so I just chose the restart option.
When I came back to the choose a startup disk option during the installation... My Internal HD was gone.
1. Yes, I had foolishly left a USB drive attached. My bad.
2. God I wish I had checked that error more closely so I knew what to tell you folks now that I am asking for help.
Anyone got a clue here? I have tried all the reset PMU, PRAM, Disk Utility - nothing is showing me this HD.

Hi
You should be able to access Disk Utility from a menu at the start of the Leopard installation process, before or when you're asked to select a destination volume for the OS install.
If the drive doesn't show in Disk Utility, it may indicate a hardware failure. Hard drives can and do fail, and I guess a fairly disk intensive activity such as an OS install is as 'good' a time as any.
Hopefully it won't come down to this though as you'd probably have to replace the hard drive, under warranty if applicable.

IDP_JMS_Bus / messaging engine failure on new install

Greetings:
I am trying to get a new install of 8.2 in a WebSphere 6.1 Win 2003 / SQLServer clustered environment up and running.
Currently the IDP_JMS_Bus will not start, and the SystemOut messages point to "No Messaging Engines running".
I have tried to start the engine, to no avail over multiple reboots.
This install took a number of tries to complete due to installation errors.
The first message in SystemOut around this is:
[5/12/10 10:52:40:359 CDT] 0000003a SibMessage W [:] CWSIV0775W: The creation of a connection for destination adobe_PECommandQueue on bus IDP_JMS_Bus for endpoint activation [com.ibm.ws.sib.ra.inbound.impl.SibRaStaticDestinationEndpointActivation@39723972 <active=true> <connections={}> <messageEndpointFactory=com.ibm.ejs.container.MessageEndpointFactoryImpl@9496c24e> <endpointConfiguration=[com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl$JmsJcaEndp ointConfigurationImpl@1642750442 <JmsJcaActivationSpecImpl.this=[com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl@18 66755908 <userName=null> <password=null> <xaRecoveryAlias=null> <destination=queue://adobe_PECommandQueue?deliveryMode=Persistent&busName=IDP_JMS_Bus> <durableSubscriptionHome=null> <destinationType=javax.jms.Queue> <messageSelector=null> <acknowledgeMode=Auto-acknowledge> <subscriptionDurability=NonDurable> <shareDurableSubscriptions=InCluster> <clientId=null> <subscriptionName=null> <maxBatchSize=1> <maxConcurrency=10> <busName=IDP_JMS_Bus> <shareDataSourceWithCMP=false> <targetTransportChain=null> <readAhead=Default> <target=null> <targetType=BusMember> <targetSignificance=Preferred> <providerEndpoints=null>]>]> <endpointInvoker=com.ibm.ws.sib.api.jmsra.impl.JmsJcaEndpointInvokerImpl@68f268f2> <workManager=com.ibm.ejs.j2c.work.WorkManagerImpl@170e170e> <endpointMethodTransactional=true> <remoteConnection=null> <remoteDestination=true> <timer=java.util.Timer@4c0c4c0c>] failed with exception com.ibm.websphere.sib.exception.SIResourceException: CWSIT0088E: There are currently no messaging engines in bus IDP_JMS_Bus running. Additional failure information: CWSIT0103E: No messaging engine was found that matched the following parameters: bus=IDP_JMS_Bus, targetGroup=null, targetType=BusMember, targetSignificance=Preferred, transportChain=InboundBasicMessaging, proximity=Bus..
Then:
[5/12/10 10:52:46:266 CDT] 0000003b SibMessage W [:] CWSIV0775W: The creation of a connection for destination Default.Topic.Space on bus IDP_JMS_Bus for endpoint activation [com.ibm.ws.sib.ra.inbound.impl.SibRaStaticDestinationEndpointActivation@12521252 <active=true> <connections={}> <messageEndpointFactory=com.ibm.ejs.container.MessageEndpointFactoryImpl@7aff2ec6> <endpointConfiguration=[com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl$JmsJcaEndp ointConfigurationImpl@303436310 <JmsJcaActivationSpecImpl.this=[com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl@16 80368680 <userName=null> <password=null> <xaRecoveryAlias=null> <destination=topic://adobe_TaskEventTopic?busName=IDP_JMS_Bus> <durableSubscriptionHome=null> <destinationType=javax.jms.Topic> <messageSelector=null> <acknowledgeMode=Auto-acknowledge> <subscriptionDurability=NonDurable> <shareDurableSubscriptions=InCluster> <clientId=null> <subscriptionName=null> <maxBatchSize=1> <maxConcurrency=10> <busName=IDP_JMS_Bus> <shareDataSourceWithCMP=false> <targetTransportChain=null> <readAhead=Default> <target=null> <targetType=BusMember> <targetSignificance=Preferred> <providerEndpoints=null>]>]> <endpointInvoker=com.ibm.ws.sib.api.jmsra.impl.JmsJcaEndpointInvokerImpl@12441244> <workManager=com.ibm.ejs.j2c.work.WorkManagerImpl@170e170e> <endpointMethodTransactional=false> <remoteConnection=null> <remoteDestination=true> <timer=java.util.Timer@12bc12bc>] failed with exception com.ibm.websphere.sib.exception.SIResourceException: CWSIT0088E: There are currently no messaging engines in bus IDP_JMS_Bus running. Additional failure information: CWSIT0103E: No messaging engine was found that matched the following parameters: bus=IDP_JMS_Bus, targetGroup=null, targetType=BusMember, targetSignificance=Preferred, transportChain=InboundBasicMessaging, proximity=Bus..
This is followed by numerous connection creation failure messages.
Can anyone provide pointers on how to correct this installation?
I have received advice to down the cluster, delete the SIB tables, and restart the cluster, but I do not want to try this without some verification that that is advisable.
Thank You in advance!
Mark

If that's the case, it looks like the messaging engine is having trouble getting an exclusive lock on its mesage store tables in the DB (that all start with SIB*):
http://blogs.adobe.com/livecycle/2007/07/what_are_those_sibtables_in_my.html
Since this is a new install, you can safely drop them. Shut down the JMS cluster members, drop all SIB tables, and then start them. Watch the SystemOut.log of the cluster members for messages that tell you that the messaging engine has acquired an exclusive lock on the tables. Only one of the cluster members will have this (since the messaging engine is a singleton and can run on either but not both of the JMS cluster members). If you see that message, check the DB - the SIB tables should be re-created, and you should no longer have this partcular trouble.
Essentially, the MEUUID in the SIBOWNER table and the Messaging Engine's UUID (as determined from the WAS console) should match.

Kindly assist with repeated failure to correctly install iTunes on Windows7 Professional. Thanks. Bobby

Could I please be assisted with recurrent failure for iTunes to install correctly on my Dell desktop running Windows7 Professional? Thank you. Bobby

Well, I found a workaround for my issue. It's described in this article:
[url="iPod not recognized correctly on Toshiba laptop"]http://docs.info.apple.com/article.html?artnum=300836[/url]
By disabling the "Sandard Enhanced PCI to USB Host Controller" in device manager, my iPod was correctly recognized and I was able to sync with iTunes. That's the good news.
The bad news is that: a) Windows warns me that my "device can operate faster if connected to a USB 2.0 port" - and the sync with iTunes runs slowly; b) if I reanable that USB device (as suggested in the Apple article, my iPod is no longer recognized.
For now, I'll just disable this device when I need to sync, then reenable it when done. But this is going to be a pain. I really don't consider this a fix. It's really annoying that the iPod is the only USB device that requires this kind of nonsense.
Looking forward to a "real" fix for this some time soon.

Failure(s) to install a particular update for Windows 7

Several times now, I've tried to use Windows update, but it keeps failing... giving the error code:
"WindowsUpdate_80070103" "WindowsUpdate_dt000"
I've searched the Windows website for an appropriate and useful answer, but so far I haven't found an appropriate answer :-(
Windows help just gives the result:
0 results for "WindowsUpdate_80070103" "WindowsUpdate_dt000"
What's going on, and why I can't find an answer to this problem, I have no idea at all.
This has been going on for several weeks now.
So unfortunately, I'm now "forced" to ignore this so-called "important" update option :-(

Hi,
What exact Windows Update did you install? Have you tried to install it manually?
Meanwhile, please follow this guide to reset the Windows Update component:
How do I reset Windows Update components?
http://support.microsoft.com/kb/971058/en-us
Karen Hu
TechNet Community Support

Failure on clean install of Service Manager 2012 R2 Data Warehouse installation - Error about "AssignSdkAccountAsSsrsPublisher"

I'm installing the Data Warehouse component on a new server (Server 2008 R2 SP1 with SQL 2012 SP1 CU6). Reporting service, analysis services and full text services are installed. I'm installing under an account that has DBO rights to the instance.
All pre-reqs pass. The installation gets to the very end of the installation and i get the following error:
An error occurred while executing a custom action:_AssignSdkAccountAsSsrsPublisher
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the Original state of the system. Once the correction are made, you can retry upgrade for this role.
I look in the setup logs and only see the following reference to "AssignSdkAccountAsSsrsPublisher"
MSI (s) (1C:00) [15:09:51:914]: NOTE: custom action _AssignSdkAccountAsSsrsPublisher unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _AssignSdkAccountAsSsrsPublisher returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Originally, I had some issues with services not being started during the install because some accounts didn't have "logon as a service" rights, but those have all been rectified. Not sure if something is leftover from that, or maybe CU6 wasn't
tested with SM R2 and i need to go back to an earlier CU?

That worked for me too. By manually removing all the folders from SSRS, then retrying the install, allowed it to proceed and complete successfully the second time around.
The first time installing SCSM 2012 R2, I got hit with
this error, which is why SSRS wasn't in a clean state. Make sure to launch setup.exe elevated as an admin!

Install on a new PC after a hard disk failure on original install?

I lost the hard disk on my desktop, with Adobe X Pro installed (an update). Purchased a new desktop, and installing my applications. I can't access the failed hard disk, now only useful as a doorstop. What are the correct steps to follow to get my license for X Pro up and running on the replacement desktop?

Did you get it installed? Do you have the license key? Did you make a backup DVD/CD of Acrobat? We have no clue where you are coming from. Adobe can help you with clearing the activation issue if that is the problem, but you need to have proof of purchase or such. You might see if you can log back in where you downloaded and see if you can get it again. It also helps if you have registered Acrobat.

Boot Failure following itunes install on vista

Hi all,
As a new ipod owner, just installed latest version of itunes. It downloaded and installed correctly but following the requested restart, pc failed to boot. Reset BOISS to defaul values, also tried all the safe mode options but no joy! It siply goes to the next stage and hangs with a black screen and a mouse pointer. Specs:
1 Samsung NP R20
2 Windows Vista
3 Standard ipod 80gb
The only strange thing during the install is that I left the ipod turned on and connected during the process. Any idea if this would have an impact? How do I get out of this one?
Cheers,
Al.

I had the same problem and this is what I did to fix it.
go to your control panel
User accounts and family safety
User accounts
You should now be at the make changes to your user account menu
Go to the last choice of turn user account control on or off and uncheck use User Account Control(UAC) to help protect your computer.
I did this and the installation worked like a breeze and we got our Itouch Ipod up and running immediately.
I hope this helps you out.

Failure Notice when installing Adobe Reader 11 Administrator rights Win7

Have tried downloading ansd installing Adobe Reader 11 on my new Dell Vostro with Win 7 Pro. I am logged in as administrator but when I try to install Adobe Reader I keep getting a message that I do not possess the necessary administrator rights. Any suggestions? I've tried downloading and installing with both IE and Firefox and have checked that Java is enabled. I also checked that I am definately logged in as administrator. Any help would be appreciated.
Thanks
Ernesto

Try this
download the offline installer from http://get.adobe.com/reader/enterprise/ and save it to disk
right-click on the downloaded installer and select Run as Administrator

I have a valid purchased QT for Mac...failure to update install...help

Gang,
I have a legitimate copy of QT...I was notified there is a 7.1.1. to update/install. I went through the update process and I get a:
The update QuickTime can't be installed.
The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by "apple".
What is wrong? How do I fix it?
Thanks, --bill

Try a different download location:
http://www.apple.com/support/downloads/quicktime711.html

Install failure Driver not installed can't install driver no permission

I have tried to install the software but can not. Errors no connection. Says no driver but it found the printer on one of the searches. I am ready to throug the PTR in the garbage and buy another brand. Help

Please follow the instructions here and answer all questions in detail.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Want-Good-Answers-Ask-Good-Questions/td...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Preupgrade script failure during DeveloperTools install(newbie alert!)

I'm trying to install DeveloperTools. I get the following error:
"Install Failed! The following install step failed: run preupgrade script for DeveloperTools. Contact the software manufacturer for assistance"
Can anyone help me?
Thanks

Hi baltwo,
Thanks for your reply. I was trying to install Dev Tools from the 10.5.1 cd.
I have not upgraded using the 10.5.8 COMBO update, but that does not seem to have helped. I have reposted my query to the Developer Forum.
My end goal is to get cvs to work with extssh - at the moment I seem to have cvs, but it won't work with extssh - I was hoping the Developer Tools would help this.

Repost: Failure trying to install Collection Server

Hi Guys and Gals,
Reposting from another forum in the hope that maybe somebody can point me in the right direction.
I am rying to Install ZAM 7.5 Collection Server on a new server in our DMZ. This is to replace the existing collection server alread located in our DMZ.
Have configured Oracle to talk to the Oracle DB on the ZAM Primary Management Server and it all works and TNSPing, etc confirms that there is connectivity.
However when trying to install the Collection Server and pointing it to my Oracle DB instance (zamdb) ... I get this error message
"Unknown Class Key - FATAL ! Persistence Layer detected an incompatibility between Objects and Schema!"
I can't seem to find out what the cause is or how to resolve it. Google has not helped, neither has the Novell KB.
I have a few suspects
1) The Oracle instance installed on New Collection Server is 10.2.0.3 whereas the current collection server and ZAM Parent Server is 10.2.0.1. However the the collection server just uses oracle for ODBC since no database is configured/installed on both the original collection server and the new collection server.
2) The Management Server has been upgraded to "7.50.0074 Interim Release 22". I think the issue here is that the installer that I am using is the from the original ZAM7.5 CD, but that since the primary server has been upgraded, something in the database doesn't match what the installer is looking for, hence the error.
If I know what to change in the database to allow installation, that would get me on my way, and then I can change it back.
Anybody have a clue as to what the error message means?
Thanks in Advance..

za,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Net8 Config failure after installing Oracle 8.1.7 on AIX 4.3.3

Failure on the installed step Net8 Configuration, the message on the Installed log "installAction.log" is :
Starting to execute optional autolaunch configuration tools
Launched configuration tool Net8 Configuration Assistant
Command which is being spawned is /oracle/app/oracle/product/8.1.7/JRE/bin/jre -Duser.dir=/oracle/app/oracle/product/8.1.7/network/jlib -classpath /oracle/app/oracle/product/8.1.7/JRE/lib/i18n.jar:/oracle/app/oracle/product/8.1.7/JRE/lib/rt.jar:/oracle/app/oracle/product/8.1.7/jlib/ewt-3_3_6.jar:/oracle/app/oracle/product/8.1.7/jlib/netcfg.jar:/oracle/app/oracle/product/8.1.7/network/jlib/netcam.jar:/oracle/app/oracle/product/8.1.7/network/jlib/netca.jar:/oracle/app/oracle/product/8.1.7/jlib/help-3_1_8.jar:/oracle/app/oracle/product/8.1.7/jlib/ice-4_06_6.jar:/oracle/app/oracle/product/8.1.7/jlib/share-1_0_8.jar:/oracle/app/oracle/product/8.1.7/jlib/swingall-1_1_1.jar:/oracle/app/oracle/product/8.1.7/network/tools:/oracle/app/oracle/product/8.1.7/jlib/opsclust.jar oracle.net.ca.NetCA /orahome /oracle/app/oracle/product/8.1.7 /instype custom /inscomp client,net8,javavm,server /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /oracle/app/oracle/product/8.1.7/network/install/netca_typ.rsp
Configuration tool Net8 Configuration Assistant was canceled
Result code for launching of configuration tool is -1
Launched configuration tool Oracle Database Configuration Assistant
Command which is being spawned is /oracle/app/oracle/product/8.1.7/bin/dbassist -responseFile NO_VALUE -createtype custom -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc /oracle/app/oracle/product/8.1.7/starterdb -sid orcl -orabase /oracle/app/oracle/product/8.1.7 -dbloc /oradata -clususer NO_VALUE -cluspswd *Protected value, not to be logged* -nodeinfo NO_VALUE -gdbName orcl
Configuration tool Oracle Database Configuration Assistant failed
Result code for launching of configuration tool is 1
Error :*** Alert: One or more tools have failed. It is recommended but not required that these tools succeed for this installation. You can now select these tools, read its details to examine why they failed, fix those problems, and retry them. Or, you can click "Next" to continue. ***
User selected: Yes/OK
I start "Net8 Configuration Assistant" manually and get the following error meesage :
$ netasst
Error loading native library: libnjni8.so.
java.lang.UnsatisfiedLinkError: jniGetOracleHome
at
at oracle.net.common.NetGetEnv.getOracleHome(Compiled Code)
at oracle.net.asst.container.NetUtils.getImageDirectory(Compiled Code)
at oracle.net.asst.container.NetApplication.init(Compiled Code)
at oracle.sysman.emSDK.client.appContainer.WebApplication.main(Compiled
Code)
Can anybody tell me what is wrong with it?

This is the same problem that we have encountered installing 8.1.7 clients on AIX 4.3.3 and 5.2. However I did successfully install it on one AIX 4.3.3 machine. Comparing the oracle logs there are no differences in the successful and unsuccessful installs until the point netasst hangs. All the machines are definitely set to run the 32 bit kernel.

Failure of flar install on X2100 M1

Similar Messages

Maybe you are looking for