Failure of the transport request containing queries

Hi *,
There was a transport request which after transport to Qual from Dev, failed with error code 8.
Going into the details, the errors were:
The request contained near about 100 queries in which some minor changes were done.
1. Element 476FLGE6HWFAKXETNDSFCL12X is missing in version M
2. Error when activating element
440YW0X722R9IRNUSMULSJCZH
I can't figure out exactly where the error is. What should be my approach ? Also, I came to know that in Qual, some changes were already done by this request.
Points will be assigned.
Regards,
Srinivas

Hi Srinivas,
Did you check that error in the table mentioned by our friend in the above post?
If you still didn't find anything, go to Tcode SE09. Check Released and Modifiable and click on display. It will display all the released and non-released requests on your id. Go to your request and check all the objects transported. Find out if you have missed anything. transport the object you want with a new request. Check whether all the queries are moved into QAS in your previous transport and if any thisng is missed transport the same. You also can retransport if you want from the scratch. It will replace all the exeisting queries in QAS.
Regards,
KK.

Similar Messages

To delete the transport request.

when i'm trying to delete the transport request by using se09, it responses with " Request/task BWDK916118 cannot be deleted because it contains locked objects." That request is created by me. It showing same name but it will not allow me to delete. Please help to delete how to delete that request.
Thanks
Satish

Hi..
Basically you are getting this messge because first you have to delete all the objects of the underlying sub requests and then the subrequests ......then finally the actual request.................
Secondly, it is better to unlock all the objects first so that you can delete all the objects at a time..............because if you have to delete all the objects one by one.....and if each requests contains 100s objects then it is very tedious to delete all the objects one by one...
Go to SE03 --> There you will get the options "Unlock Objects (Expert Tool) " --> Click over there --> give the subrequest nos and unlock it....
Then go to SE01 --> Click on "Objects" tab --> You will get the change button --> click on it --> Select All and Delete at a time...
Regards,
Debjani..

When is the entire function group added to the transport request

When you modify a functionmodule in a function group, only the object of the functionmodule( LIMU FUNC) is added to the transport request.
When you modify an include of the function group, the reportsource of that include (LIMU REPS) is added to the transport request.
But under some circumstances the entire function group is added to the transport request (R3TR FUGR).
Can somebody clarify under what circumstances the entire Function Group is added to the transport request?

I was actually looking for the reason why I would find R3TR FUGR objects in requests for existing function groups.
What I found out is that R3TR FUGR is added to the request when :
- the function group is created
- a function is renamed
- the function group is deleted
- you choose : Write Transport Entry, in the context menu of the Function group.
The actual problem was that in our upgraded system (ERP2005) we had a transport containing the function group (R3TR FUGR) and we thought none of these actions had been taken. After talking to the developer in question, I found out he did rename a function module, so I have my solution.
But thanks everybody for the insight.
Message was edited by: Dries Horions

Function Module not being displayed in the Transport Request

Hi,
I Created a FM "RH_ACTIVATE_WFOBJECT_AFTER_IMP" in my SAP System. After I created due to problem in editing I have deleted the FM and also deleted it from the request.
I have re created the function module and if I see the object directory entry I find the following
Identical request locks
Request User Task/request Object
**** ***** R3TR FUGR RHWS
In the request I cannot find the function module but only the function group. Please help me to get my function module visible in the transport request.

Hi ,
When your creating the FM for first timw with new FGRP then no need to worry .
You can see only the FGRP in the transport request number and when you move this transport request to further systems your FM automatically transport with the FGRP.
Next time when your creating a new FM under the FGRP which is already moved to production you can see only your FM name under the transport request.
When you go to FGRP main program by follwing the path
FGRP -> Disply FGRP in SE37 you can see the main program of the FGRP there if you see one include with TOP and XX .
double click on the XX Include.
there you can see allthe FM under that FGRP.
Thanks
Naresh

How to Trace all the Transport Requests on a machine ?

Hi,
I am need of a procedure to find out all the transport requests (Workbench or Cusomizing) created on a particular Computer based on its IP address or the Host name ...
Or In other words....
If there are multiple users(>20) using the same Development USER ID and PASSWORD (Say SAPDEV)... How can I track which person has created a particular request based upon the person's PC IP address or Hostname ?
Thanks in Advance...
Regards,
Mohammed Anwar...

Congratulations to tell on a public SAP forum that you don't pay the SAP developpers licenses !
That is very smart and will surely please a lot the SAP Company !

How to delete the entries from the transport request

i need to delete the entries programatically from the transport request for all the entries which is exists in the package for the tables e070 and e071.

Hi,
I think you need to have authorization for that thru auth group SA.
One more thing is where ever its created like source client only you can do if u have authorization.
Regds
Sivaparvathi
Please reward points if helpful...

How to find out the Transport request (TR)

Hi all,
which is the table that stores all the Transport requests. (TR)
Regards,
Venkat

hi,
see both of these following table
E070 , E071
and aslo see the following link
[TR|Transport Request for Custom Table??;
Regards
Ritesh J

In which database table we can find the Transport request for programs?

Hi i have set of programs , for them i have to find the transport request , please guide me in this
thanks in advance

Hi Sitaram,
If you happend to be one of those who forgot the transport request number of your abap program.
You can easily find it via the Versions Management.
Steps :-
Transaction SE38
Filled in your ABAP program name.
Then click Utilities -> Versions -> Version Management
SAP system will display this sample list :-
Versions: Report source ZPROGRAM
Version Cat Fla SAP Rel. Arch Request              Date       Time     Author
Version(s) in the development database:
X activ          X 46X                                      01.08.9999 15:21:56 SAP
Version(s) in the version database:
X 00002             46X        ABCD123456      01.08.9999 15:52:43 SAP
X 00001 S    X 46X                                     00.00.0000 00:00:00
Kindly Reward Points If You Found The Reply Helpful,
Cheers,
Chaitanya.

How to track the transport request number for the Role/Composit Role

Hi,
How to track the transport request number for the Role/Composit Role.
Thanks,
Ravi

Use transaction SE03 Transport Organizer Tools
Execute "Search for Objects in Requests/Tasks" with objects of types:
R3TR ACGR Role
R3TR ACGT Role - User assignment
Regards

Re-transport the transport request to NQA server after system refresh

Hi
Users are moving the transport requests in NQA (quality server) using STMS tcode and Basis team is moving the trasnport requests using TP command in operating system level.
There are some transport requests that are released and are moved only to NQA server but not in Production server.
After the NQA refresh from Production server, we need to re-create the trasnport route for NQA server
in NQA using SE06 and STMS.
Now users want to re-transport the requests again in NQA server that was moved to NQA before the system copy but they are not able to make it. In the transport queue, users are able to see their transport requests but they are not able to re-transport.
When basis team try to move the same transport requests using TP command in operating system level, it failed with error:
- "Transport request is not in buffer".
- x2n0v2:nqaadm 14> transport250_NQAu126 908807
/usr/sap/trans/NDV/cofiles/K908807.NDV
is this the correct cofile ?y
cofile is K908807.NDV
source system is NDV
transport type is K
transport name is NDVK908807
Renamed to K908807.NDV.INTRANSIT on dbcindv
Datafile copied to dbcinqa
Cofile copied to dbcinqa
-rw-rw-r--   1 nqaadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NQA/data/R908807.NDV
-rw-rw-r--   1 ndvadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NDV/data/R908807.NDV
-rw-rw-r--   1 nqaadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NQA/cofiles/K908807.NDV
-rw-rw-r--   1 ndvadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NDV/cofiles/K908807.NDV.INTRANSIT
Please compare the files before proceeding
Do you wish to continue the import?y
tp addtobuffer NDVK908807 NQA pf=TP_DOMAIN_NDV.PFL
This is tp version 305.13.25 (release 46D) for ANY database
Addtobuffer failed for NDVK908807.
Cofile not existent or corrupted (datafile exists).
If source system is available you may try to reconstruct
the cofile using the command "createinfo".
We used the following method to re-transport the requests to NQA server:
"STMS --> Request -->Delete (the request number)" method delete the transport request from transport queue and from the cofiles/data directory of the operating system and then " STMS --> extra-> other request-> add" allow us to put the transport request back to transport queue in NQA server. Once the transport requests are in queue, we can re-transport all of them one by one or in group.
Question: Is it the right way to re-transport the request in NQA (first delete if from transport queue and then add and then re-import in NQA server).
Id there is any other way to re-transport the requests, pls suggest us.
Thanks
Amar

Amar,
Depending on how many tarnsports you have and also if this is one time, what you can do is ask Basis guys to write a small script which adds to the buffer to your NQA system.
Steps:
1) under /usr/sap/trans/buffer rename the NQA buffer file.
2) create a new empty file NQA (make sure permissions are identical)
3) Provide the list of transports and ask Basis team to put it in a file at Unix level
4) Run a script which will add to the buffer from the source file.
5) From STMS refresh the NQA queue and you should see all the transports ready for import.
Hope this helps.
Thanks,
Naveed
Edited by: Naveed Qureshi on Dec 4, 2008 8:52 AM

How to find the transport request which was released to Quality

Hi Friends,
Could anyone please let me know, how to find the transport request that was already released from Development to Quality?
there was some change in customization took place. I could find the user (through change log) who made these changes, however I could not find the transport request number he has already released. I did give his user name in SE10 and checked the released checkbox and did click transports to see them, however I found nothing. A message got displayed on the screen: Cross-system information for user xxx. I can't ask the Basis people about it, as its not yet been trasnported to Productive.
Is this the correct way to see the transport request number? Is there any other way to find the number. I can give the tentative dates when the change was released.
This post might already posted before, I did some search, could not find the exact info what I am looking for. Would appreaciate if anyone could give the step by step method to find it.
Thanks in advance.
BR,
Sats.

Ram,
let me tell you the the situation in a better way.
When I see se10 with my user id I could see all the transport requests that I have released. However, now when I enter my colleague user id who did these changes (he is on vacation, otherwise I could simply ask him the transport number), nothing is shown on the page. in simple words the page is completely blank. Initially I thought it is because of some authorizations, but I can get the transport request numbers that are released by another user.
the info what I have right now are:
1. I knew the user name who did these chages
2. I knew the date when it was changed.
I just need the Transport Request number I mean which starts with DEVXXXXXXX.
As per your solution --> If you have any idea when the reques was relase you can select the request and click on goto-transport logs. This way you can find out the request. --> I knew the date when it was released, but didnt understand, the bold and underlined sentense in your answer.. select on which request? as I said, the page was blank after I enter his user id and activate it.. May be I did not understnd your solution properly. Could you please simplify it.
Thanks a bunch in advance
Sats.

The transport request are pending in the import quene

Hi the transport request are released from the development system and are showing pending in the production system

Hi Shri,
According to your query you have only two system landscape. If this is true then before import transport to prd from dev to import in send box which is test client. If everything is ok then you can import this transport in prd server with stms tcode.
If you have any doubt pls mentioned here in details.
Regards,
Anil

Program to Track the Transport Request

Hi Experts,
I got a requirement to write a program which can track and compare the Transport Request between the servers(Development ,Test and Production) .
If in case is there any descrepancy between the versions (In the server) it should throw an error saying that particular thing is missing or not synchronized.
For ex: If the program which is in Development server has some structure dependent to the code which is address to single TR.
where as same version of the program in Test don't have structure ,it has to throw an mismatch error.
If you guys have any clue on this please throw some light.
Higher points will be rewarded for every useful inputs.
Thanks in Advance,
Dharani

Hi Dharani,
Some sample Code. This I got debugging the SAP Standard.
TYPE-POOLS: strhi.
Data varaints for remote compare
INCLUDE rvscdcom.
INCLUDE rsvcutct. "Utilities, Constants, Types
INCLUDE rsvcvcct. "General Constants Types
INCLUDE rsvcvdct. "VRSD Constants Types
INCLUDE rsvctrct. "Tables for transports details
INCLUDE rsvcditd.
INCLUDE ole2incl.
DATA: application TYPE ole2_object.
DATA: remote_info_line LIKE abaptext-line,
 remote_info_line_a LIKE vrsinfolna,
 remote_info_line_b LIKE vrsinfolnb,
 remote_versno LIKE vrsd-versno,
 remote_objname LIKE vrsd-objname,
 remote_objtype LIKE vrsd-objtype,
 remote_system LIKE tadir-srcsystem,
 returncode LIKE sy-subrc.
DATA: srcsys LIKE tadir-srcsystem,
 author LIKE tadir-author,
 mslang LIKE tadir-masterlang,
 devcla LIKE tadir-devclass,
 notfnd LIKE bool.
INCLUDE rsvceudb.
INCLUDE rsvcvdtd. "VRSD Constants Types
INCLUDE rsvctrtd. "Tables for transports details
INCLUDE rsvctrfo. "Interface for transport details
INCLUDE rsvcrmck. "Remote Access Utilities: Checks
 PERFORM get_rfc_destination USING srcsys
 CHANGING w_destination1.
 SELECT SINGLE objname objtype korrnum FROM vrsd
 INTO CORRESPONDING FIELDS OF it_transports
 WHERE objname = it_abap_hdr-obj_name
 AND objtype = it_abap_hdr-object
 AND versno = '00000'.
 it_transports-trkorr = it_transports-korrnum.
Open tranport number with object name
 SELECT SINGLE trkorr pgmid object obj_name FROM e071
 INTO CORRESPONDING FIELDS OF it_transports
 WHERE trkorr = it_transports-trkorr
 WHERE trkorr NE 'SW3_P00001'
 WHERE pgmid EQ it_abap_hdr-pgmid
 AND object EQ it_abap_hdr-object
 AND obj_name EQ it_abap_hdr-name
 AND lockflag EQ 'X'.
Open tranport number with object name
 SELECT SINGLE as4user as4date FROM e070
 INTO CORRESPONDING FIELDS OF it_transports
 WHERE trkorr = it_transports-trkorr.
Remote compare
 IF p_rcomp = 'X'.
 CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
 EXPORTING
 text = 'Remote Comparison started'.
 IF w_destination1 NE space.
 PERFORM remote_compare USING w_destination1.
 IF it_transports-korrnum EQ it_transports-trkorr.
 it_abap_hdr-in_qa = 'Same version'.
 ELSEIF it_transports-korrnum IS INITIAL.
 it_abap_hdr-in_qa = 'Not found'.
 ELSE.
 it_abap_hdr-in_qa = 'Not Same version'.
 ENDIF.
 MODIFY it_abap_hdr.
 ENDIF.
FORM get_rfc_destination USING pi_orgsys
 CHANGING po_destination.
Baustein zur Auswahl von R/3-Destinationen.
FUNKTION(EN):
ruft einen FB, der den Anwender eine Destination für den
Aufruf der Versionsverwaltung als REMOTE-Function-Call
auswählen läßt.
Parameter:
PI_ORGSYS LIKE TADIR-SRCSYSTEM
PO_DESTINATION LIKE RFCDES-DESTINATION
DATA: dest_note(60). " für STRA Baustein
IF pi_orgsys = space.
 po_destination = space.
 dest_note = space.
ELSE.
 IF pi_orgsys <> sy-sysid.
 po_destination = pi_orgsys.
 ENDIF.
 CONCATENATE
 'Note: The original system of the object is the system'(l11)
 pi_orgsys INTO dest_note SEPARATED BY space.
 CONCATENATE dest_note '.' INTO dest_note.
ENDIF.
CALL FUNCTION 'SVRS_GET_RFC_DESTINATION'
 EXPORTING
 p_text = dest_note
 IMPORTING
 remote_dest = po_destination
 EXCEPTIONS
 no_destination = 1
 OTHERS = 2.
IF sy-subrc <> 0.
Falls keine Destination ausgewählt wurde:
 po_destination = space.
ENDIF.
ENDFORM. "get_rfc_destination
INCLUDE LSVRLF07 *
FORM get_version_list_remote USING pi_objtype pi_objname
 CHANGING po_no_entry.
DATA: old_state LIKE bool.
REFRESH: vrs_dir_vrs, logvers_dir.
PERFORM check_vc_state_remote CHANGING old_state.
IF old_state = true.
 PERFORM get_old_fashioned_versdir USING pi_objtype pi_objname
 CHANGING po_no_entry.
ELSE.
 CALL FUNCTION 'SVRS_GET_VERSION_DIRECTORY_46'
 EXPORTING
 destination = dir_destination
 objname = pi_objname
 objtype = pi_objtype
 TABLES
 version_list = vrs_dir_vrs
 lversno_list = logvers_dir
 EXCEPTIONS
 no_entry = 1
 system_failure = 2
 communication_failure_ = 3.
 CASE sy-subrc.
 WHEN 0.
 po_no_entry = false.
 WHEN 1.
 po_no_entry = true.
 WHEN 2.
 'Fehler im Zielsytem'.
 MESSAGE W123.
 LEAVE.
 WHEN 3.
 'Keine Verbindung zum Zielsystem'.
 MESSAGE W124.
 LEAVE.
 ENDCASE.
ENDIF.
ENDFORM. "get_version_list_remote
 FORM CHECK_VC_STATE_REMOTE *
FORM check_vc_state_remote CHANGING po_old_state.
DATA: head_entry LIKE vrsd.
PERFORM get_vrsd_entry_remote
 USING head_type head_objname head_versno
 CHANGING head_entry po_old_state.
ENDFORM. "check_vc_state_remote
 FORM GET_VRSD_ENTRY_REMOTE *
FORM get_vrsd_entry_remote USING pi_objtype pi_objname pi_versno
 CHANGING vrsd_entry po_no_entry.
CALL FUNCTION 'GET_VRSD_ENTRY_46'
 EXPORTING
 destination = dir_destination
 objname = pi_objname
 objtype = pi_objtype
 versno = pi_versno
 IMPORTING
 vrsd_entry = vrsd_entry
 EXCEPTIONS
 no_entry_found = 1
 system_failure = 2
 communication_failure = 3.
CASE sy-subrc.
 WHEN 0.
 po_no_entry = false.
 WHEN 1.
 po_no_entry = true.
 WHEN 2.
 'Fehler im Zielsytem'.
 MESSAGE W123.
 LEAVE.
 WHEN 3.
 'Keine Verbindung zum Zielsystem'.
 MESSAGE W124.
 LEAVE.
ENDCASE.
ENDFORM. "get_vrsd_entry_remote
 FORM GET_OLD_FASHIONED_VERSDIR *
--> PI_OBJTYPE *
--> PI_OBJNAME *
--> PO_NO_ENTRY *
FORM get_old_fashioned_versdir USING pi_objtype pi_objname
 CHANGING po_no_entry.
DATA: vrsd_entry LIKE vrsd.
DATA: object_not_found LIKE bool.
PERFORM get_vrsd_entry_remote
 USING pi_objtype pi_objname null_versno
 CHANGING buffer0 po_no_entry.
IF po_no_entry = false.
 CALL FUNCTION 'GET_VERSION_LIST_46'
 EXPORTING
 destination = dir_destination
 objname = pi_objname
 objtype = pi_objtype
 TABLES
 version_list = vrs_dir_vrs
 EXCEPTIONS
 system_failure = 1
 communication_failure = 2.
 CASE sy-subrc.
 WHEN 1.
 'Fehler im Zielsytem'.
 MESSAGE W123.
 LEAVE.
 WHEN 2.
 'Keine Verbindung zum Zielsystem'.
 MESSAGE W124.
 LEAVE.
 ENDCASE.
 SORT vrs_dir_vrs DESCENDING BY versno.
 LOOP AT vrs_dir_vrs.
 logvers_dir-versno = vrs_dir_vrs-versno.
 APPEND logvers_dir.
 ENDLOOP.
 READ TABLE vrs_dir_vrs INDEX 1.
 IF vrs_dir_vrs-versmode = impt_mode.
 Es gibt einen offenen Import, setze Flag zurück:
 vrs_dir_vrs-versmode = corr_mode.
 ENDIF.
 vrs_dir_vrs-versno = 0.
 MODIFY vrs_dir_vrs INDEX 1.
ENDIF.
vrsd_entry = buffer0.
PERFORM add_active_version_remote
 CHANGING vrsd_entry object_not_found.
IF object_not_found = false.
 po_no_entry = false.
ENDIF.
Möglicherweise gibt es eine überarbeitete Version.
PERFORM add_modif_version_remote
 CHANGING vrsd_entry object_not_found.
IF object_not_found = false.
 po_no_entry = false.
ENDIF.
ENDFORM. "get_old_fashioned_versdir
 FORM ADD_ACTIVE_VERSION_REMOTE *
--> VRSD_INFO *
--> PO_NOT_FOUND *
FORM add_active_version_remote CHANGING vrsd_info STRUCTURE vrsd
 po_not_found.
DATA: object_not_found LIKE vrsd-versmode.
DATA: nplus1 LIKE vrsd-versno.
DATA: retcode LIKE bool.
CALL FUNCTION 'FIND_OBJECT_40'
 EXPORTING
 destination = dir_destination
 objname = vrsd_info-objname
 objtype = vrsd_info-objtype
 IMPORTING
 object_not_found = object_not_found
 EXCEPTIONS
 system_failure = 1
 communication_failure = 2.
CASE sy-subrc.
 WHEN 1.
 'Fehler im Zielsytem'.
 MESSAGE W123.
 LEAVE.
 WHEN 2.
 'Keine Verbindung zum Zielsystem'.
 MESSAGE W124.
 LEAVE.
ENDCASE. " SY-SUBRC.
IF object_not_found = space.
 po_not_found = false.
ELSE.
 po_not_found = true.
ENDIF.
CLEAR: vrsd_info-korrnum, vrsd_info-author,
 vrsd_info-datum, vrsd_info-zeit.
IF po_not_found = false.
 IF vrsd_info-versmode = impt_mode.
 Es gibt einen offenen Import, und einen Satz n+1 der
 uns verschwiegen wurde. Er beschreibt die aktive Version
 nplus1 = vrsd_info-lastversno + 1.
 PERFORM get_vrsd_entry_remote
 USING vrsd_info-objtype vrsd_info-objname nplus1
 CHANGING vrsd_info retcode.
 ELSE.
 PERFORM get_korrinfo_remote CHANGING vrsd_info.
 ENDIF.
 MOVE-CORRESPONDING vrsd_info TO vrs_dir_vrs.
 vrs_dir_vrs-versno = null_versno.
 logvers_dir-versno = acti_versno.
 INSERT vrs_dir_vrs INDEX 1.
 INSERT logvers_dir INDEX 1.
ENDIF.
ENDFORM. "add_active_version_remote
 FORM ADD_MODIF_VERSION_REMOTE *
FORM add_modif_version_remote CHANGING vrsd_info STRUCTURE vrsd
 po_not_found.
DATA: mod_dd_exists LIKE vrsd-versmode.
CALL FUNCTION 'TEST_MOD_DD_40'
 EXPORTING
 destination = dir_destination
 objname = vrsd_info-objname
 objtype = vrsd_info-objtype
 IMPORTING
 mod_dd_exists = mod_dd_exists
 EXCEPTIONS
 system_failure = 1
 communication_failure = 2.
CASE sy-subrc.
 WHEN 1.
 'Fehler im Zielsytem'.
 MESSAGE W123.
 LEAVE.
 WHEN 2.
 'Keine Verbindung zum Zielsystem'.
 MESSAGE W124.
 LEAVE.
ENDCASE.
IF mod_dd_exists <> space.
 po_not_found = false.
 PERFORM get_korrinfo_remote CHANGING vrsd_info.
 MOVE-CORRESPONDING vrsd_info TO vrs_dir_vrs.
 vrs_dir_vrs-versno = modi_versno.
 logvers_dir-versno = modi_versno.
 INSERT vrs_dir_vrs INDEX 1.
 INSERT logvers_dir INDEX 1.
ELSE.
 po_not_found = true.
ENDIF.
ENDFORM. "add_modif_version_remote
 FORM GET_KORRINFO_REMOTE *
FORM get_korrinfo_remote CHANGING vrsd_info STRUCTURE vrsd.
CALL FUNCTION 'GET_KORRNUM_AUTHOR_DATUM_40'
 EXPORTING
 destination = dir_destination
 objname = vrsd_info-objname
 objtype = vrsd_info-objtype
 IMPORTING
 author = vrsd_info-author
 datum = vrsd_info-datum
 korrnum = vrsd_info-korrnum
 zeit = vrsd_info-zeit
 EXCEPTIONS
 system_failure = 1
 communication_failure = 2.
CASE sy-subrc.
 WHEN 1.
 'Fehler im Zielsytem'.
 MESSAGE W123.
 LEAVE.
 WHEN 2.
 'Keine Verbindung zum Zielsystem'.
 MESSAGE W124.
 LEAVE.
ENDCASE.
IF vrsd_info-korrnum <> space.
 Korrektur ist offen, Zeitstempel korrigieren:
 vrsd_info-datum = sy-datum.
 vrsd_info-zeit = sy-uzeit.
ENDIF.
ENDFORM. "get_korrinfo_remote

How to know the Transport Request status?

Hi all,
i need to develop a report wherein i need to display the status of the Transport Request..i mean it should display wheteher it has move to the Production system?Is there any table or FM which gives the cross system details of the Transport Request.
Thanks in advance,
Rakesh.

Hi Rakesh,
Please check this FM.
TR_LOG_OVERVIEW_REQUEST_REMOTE
TR_LOG_OVERVIEW_REQUEST
TR_LOG_OVERVIEW_REQUESTS
Hope this will help.
Regarsds,
Ferry Lianto
Please reward points if helpful.

How to include the transport request

Hi Experts,
i am asked to create a copy of cube and asked to .Include the Transport request in request DEVK9795967
Please explain how to do it,
Thanks in Advance
Nitya

Hi,
You can create the copy of Infocube and Include the transport requst. Follow bellow steps;
1. Goto RSA1> Select Info Area> Select Create the Infocube> Give the Technical/Discreption and Select the Copy of the Cube> Save and Activate.
2. At acitvation time the system asked the request.
Select the Own request from Pop Up> Select your created request> Select Continue.
It wil include the your created request.
Regards.

Failure of the transport request containing queries

Similar Messages

Maybe you are looking for