Failure of update OS X10.5.7 to finish

hi
i have two Mac units in dire need to be updated
1.Macbook Pro 17 Pre Unibody 2.33 version
2.Imac early 2008
I dont know how true it is but my friend who owns an Apple Shop says that it because of faulty internet service
I cant accept the fact that for the first time Macs have been this complicated,Ive already tried doenloading it manually and in automatic,both have failures,,either the image won't mount or the software has a problem
I have encountered this problem just now and I feel i have an iLife 2009 which i can't install to my iMac cause the software needs to be updated,by the way my imac runs in OSX 10.5.3 brand new..both can't be upgrade,im gettin frutrated over this and I really need help
Im not a techie person,so if you guys din'tmind helping me out please..please do

i.gin wrote:
hi
i have two Mac units in dire need to be updated
1.Macbook Pro 17 Pre Unibody 2.33 version
2.Imac early 2008
I dont know how true it is but my friend who owns an Apple Shop says that it because of faulty internet service
I cant accept the fact that for the first time Macs have been this complicated,Ive already tried doenloading it manually and in automatic,both have failures,,either the image won't mount or the software has a problem
Your Apple guy is probably right. If the image fails to mount or install that is indicative of a corrupt download.
Delete the partial download you have - probably in our downloads directory and try again. Be sure that the size is correct after the download completes.

Similar Messages

  • Creative cloud failure to update lightroom

    I have Creative Cloud and am unable to update without it stating "failure to update"
    Periodically get message that their is a problem with Adobe Creative Cloud at the suppliers end
    What should I do to get updates or to re-install LR 5?

    UnSeenImages what specific error do you receive?  What update are you trying to download?

  • Dear Customer,  It hase come to our attention that your account billing Information records are out of date. That requires you to update your Billing Information. Failure to update your records will result in account termination records...  Click on

    Dear Customer,
    It hase come to our attention that your account billing Information records are out of date. That requires you to update your Billing Information. Failure to update your records will result in account termination records...
    Click on the reference link below and enter your login Information on the following page to confirm your Billing Information records..
    Verify Now >
    Wondering why you got this email?
    It's sent when someone adds or changes a contact email address for an Apple ID account. If you didn't do this, don't worry. Your email address cannot be used as a contact address for an Apple ID without your verification.
    For more information, see our frequently asked questions.
    Thanks,
    Apple Customer Support
    TM and copyright © 2014 Apple Inc. Apple Sales International, Hollyhill Industrial Estate, Cork, Ireland. Company Registration number: 15719. VAT number: IE6554690W.
    All Rights Reserved / Keep Informed / Privacy Policy / My Apple ID
    Anyone else get this today?
    And yep i know this message doesn't go here however the ability to post in general postings to most viewers is lost to me in the ridicules way apple setup there support

    It's phishing. Forward it to [email protected] and then delete it.
    (118880)

  • Failure to update PS-CS6 error code u44m1p7

    Hi:  Repetaed failure to update my PS CS6. Getting error U44M1P7. Other modules of Craetive suite CS6 (eg: bridge, illustrator) update properly. Have PS-CC  also and is running properly. Just installed Adobe application manager update thinking it will solve problem. Any ideas
    Natraj

    Please send me the installer logs so that we can see what could be the reason for the failure.
    Location:
    Mac: /Library/Logs/Adobe/Installers/
    Win32 : C:\Program Files\Common Files\Adobe\Installers
    Win 64: C:\Program Files (x86)\Common Files\Adobe\Installers
    The name would be like: <Adobe Photoshop CS6 Support <Update version> (date/time)>
    Send them to [email protected]
    Further, which version update was failing??
    Regards
    Pragya

  • Failure when updating firmware. Write error in disc

    I have tried to update the software of my ipod of fifth generation and leaves a message that puts: failure when updating firmware. Write error in disc. Please, only it have 20 days. I need help. I have proven to put it in way disc, I have to reinstall software and nothing gives result.

    here is a good place to start with that error:
    "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod

  • Arghhhhhhhhhhhh cant update my x10

    hi, i cant update my x10, for weeks i got to the update part and i got a pop up saying se web page overloaded, now i get a pop up saying, unable to install or start software update component, someone help please

    Not sure which method you are using, but can you try the SE Update service
    http://dl-www.sonyericsson.com/cws/download/1/110/61/1317636927/Update_Service_Setup-2.11.10.7.exe
    Download, install and launch the update service. Follow the onscreen prompts.
    Please backup your phone data and settings before proceeding.

  • HT4623 please help me when update my i phone 3G i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect

    please help me < when update my i phone 3G < i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect

    Sounds like your phone was hacked to use with your carrier.  Updating it has relocked the phone to it's original carrier.  You will not get the phone working again without a SIM from the original carrier.

  • HT4528 I went to Update my I phone (4)  and It was updating then said it could not finish the update left my phone on the black  apple  after 40 mins  went to recovery mode .. it said restore it but everytime I try  it  said error 18 what can i do

    pretty much what the  title said
    I went to Update my I phone (4)  and It was updating then said it could not finish the update left my phone on the black  apple  after 40 mins  went to recovery mode .. it said restore it but everytime I try  it  said error 18 what can i do? 

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. Some glitch occured and you have to restore/erse the iPod. Y will have to restore from an existing backup if y ohave one.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • I have been updating may iphone 4, after installation finished it said iccid unknown, what should I do?

    I have updated my iphone 4, after setap finished iccid unknown and I can't go fartherly

    Answered in your other post. Basically your iPhone has been hacked
    or otherwise modified in the past and the most recent update has not
    been able to proceed due to past changes. Google may provide some
    help, but more likely the iPhone is unrestoreable.

  • IPod failure after update : do not panick (too much)

    This message is both to thank helpers on the forum that saved me from having to send my iPod to repair and to those of you who are (or about) to experience the same problem.
    My profile :
    40Go 4th generation iPod with 20Go music in, always handled with extreme care, used daily for 16 months (so out of warranty) without a slightest faillure, including ripping to my new computer.
    PowerBook G4 under Mac OSX 10.4.6. Just to say my message won’t help PC users, sorry.
    Connection Firewire or USB2.
    My nightmaric experience of 2006-03-23 update.
    After I had updated, I transferred a recent playlist OK onto the iPod but to my surprise read 0 playlists, artists, songs etc on the iPod screen and could not access any tracks.
    Did the 5Rs several times with no success, ie different alarm signals would show (not the sad face icon though), the iPod would not connect or would refuse to disconnect or would freeze every app. on my computer which always get a bit scarying. Checked the iPod under disk utility found out several errors.
    After much fiddling around and thanks to fantastic help on the forum (track these by browsing my posts), I think I can tell you now what to do if the same happens to you and help you to recover a fully functional iPod in a couple of hours. But beware that this only applies if you don’t have any physical damage of your hardware. My iPod never made the strange noises that many users report. I should add that I am absolutely convinced that it is the update that interferes with some iPod models and so just the software has to be reinitialized.
    First try a 5R of course, but if this does not solve the problem (in my case it surely did not), switch to disk mode and connect your iPod. If it opens iTunes, quit iTunes and go to disk utility. First check the disk in the SOS panel. It will give you an idea of bad sectors and/or failure to complete. If the checking is OK proceed to erase with the security option « zero out data ». If the disk has bad sectors, you should first do a quick erase with the « don’t erase data » option, then check if the disk passes the check up. If yes return to erase and erase again by selecting « zero out data ». The computer will warn you that you are going to lose functions of the iPod but don’t worry, you will restore these straight afterwards. This reformatting will take maybe a couple of hours but you should see it progressing smoothly with the elapsing time moving on. After it is completed, re-check the disk once more. You are now ready to restore, and I recommend that you do it using a previous soft version, eg, 2006-01-10 for instance, not 2006-03-23 which initially caused the problem. It may freeze while restoring. Don’t panick and try restoring again. I was successful at my second go. Complete restoring, as asked on your computer, by plugging to power supply. Then enter your own settings, langage etc, and come back to your computer, go to iTunes and…
    … I wish you that, a couple of minutes later, you have hundreds songs back onto your favorite music companion and that you are ready for hours of bog-free listening like I am now.
    Just to end up, I’d like to thank all the helpers on the forum (Mitch, Lyssa, Jeff… and co.) who give a lot of their time to the community in avery friendly way. I am in touch with Apple so that if ever the problem happens to be reasonably frequent, they do release a note asap.
    Best of luck to everyone don’t hesitate to contact me on this thread if you need more details on the procedure, I’ll try to help as much as I can but I am not an expert just a regular user of Apple computers and slightly ; ) addicted to music and daily use of iPod (so not so mad afterall… ; ).
    PowerBook G4   Mac OS X (10.4.6)   iPod 40G 4th gen

    Don't give up HOPE ** this work for Mac users only**
    so, after 4 days of trying the disk utility erase mode-- sometimes working sometimes not,,, ditto to all of these posts- my ipod seemed to have a hard drive failure the way it was clicking-- anyways-- here is what worked for me--
    hold the middle button and play/pause until you see the check mark- (this puts the ipod into disk mode)
    plug it in to your computer
    open up the disk utility
    choose Mac OS extended - **make sure the jornaled in not selected, and also **uncheck install OS9
    then erase- you may get the question about naming your ipod if itunes opens and all that -- I'd name it, but make sure you check the option to manually update- you don't want to keep the box checked to sync with your itunes at this point-then eject it by using the eject button from itunes in the window on the left-
    go to your ipod software updater folder (located in your utilities folder)---- here's the catch- the only updater that seemed to work for me- after 4 days of torment- was the
    11-17-05 updater!- (I actually talked to a tech. on the phone and he said the latest update does not have a bug-yeah right,that's when all my problems started- but he said the one before it does!!- thanks for letting us know apple!)
    so, double click it- hit restore - and wow- it actually worked- Good luck peeps- I know, myself, I was very disappointed in apple with this situation- My warranty ran out two months ago!- like many others I see here, I feared i was looking at another 300 dollars for the 30GB- but, alass it worked Amen- Let me know if I can help anyone- I'll check back on the board soon- to answer any questions i can
    G4 Mac OS X (10.0.x)

  • Multiple failures after updates Windows 7 64 bit Home Premium

        After loading the latest set of updates for my Windows 7 Home Premium 64 bit operating system and rebooting,   I am now experiencing a cascade of failures.  None of my network (wireless or ethernet) adapter or miniport drivers
    will load.  my firewall will not load or has failed.  I cannot logon to my Event Viewer to figure out what failed and my Microsoft NET is giving me errors when I try to access anything that might help me figure out what went wrong.  So far I
    have done a system restore back to before the update, but it did not fix the problems.  I have tried to use Microsoft Fix it, but that must access the internet.  I am sending this from a different computer because I cannot get online with the other. 
    Can anyone give me a clue where to start fixing these problems or do I have to completely reinstall my operating system?
    Thanks.

    Hi,
    In this case, you can try repairing windows image using DISM command.
    http://technet.microsoft.com/en-us/library/hh824869.aspx
    If it still can't work, please make a repair install to fix your system.
    http://support.microsoft.com/kb/2255099
    Andy Altmann
    TechNet Community Support

  • Java applet failures after updating to Java 6 Update 19

    Hi,
    I'm currently experiencing a failure of unsigned Java applets after upgrading to JRE/Plugin 1.6.0_19. The problem with the update has been narrowed down to an interim fix for a TLS/SSL Man-in-the-Middle attack (see http://java.sun.com/javase/javaseforbusiness/docs/TLSReadme.html). This fix intentionally fails attempted renegotiations.
    The environment consists of Windows XP PCs running IE6/7 and JRE 1.6.0_19 as clients connecting to a website using SSL connections and SmartCard(PKI) authentication.
    Previously, clicking a link on the website produced a new window to an URL with some HTML that uses an <APPLET> tag to open a Java applet. Prior to the applet loading, a Java "Request Authentication" dialog would pop up to allow selection of a certificate to be used for authentication from the browser keystore.
    Now, no such dialog displays. And, depending on client and chosen applet, these responses are observed:
    (1) complete failure of the applet to load with "java.lang.ClassNotFoundException" and "javax.net.ssl.SSLException: HelloRequest followed by an unexpected handshake message" errors in the console;
    (2) the applet loads but is unable to read its data files with "java.io.IOException" and "javax.net.ssl.SSLException: HelloRequest followed by an unexpected handshake message" errors in the console.
    Overriding the interim fix with "-Dsun.security.ssl.allowUnsafeRenegotiation=true" results in a return to normal operation, but our security team does not deem this override an acceptable solution.
    Any ideas?
    Eric

    http://pastebin.com/xQfhVirq
    Thanks for the detailed log.
    Your server requested a renegotiation, and as renegotiation is unsafe, the client refused to renegotiate the connection. That's the expected behavior.
    However, it seems strange that the server send a incorrect block of data immediately following the renegotiation request. From the bytes, I don't known what was the data the server sent following the handshake message. It would be of help if you could load your another log with the debug enabled (javax.net.debug=all)and unsafe renegotiation enabled(sun.security.ssl.allowUnsafeRenegotiation=true).
    1431. [Raw read]: length = 5
    1432. 0000: 16 03 01 00 14 .....
    1433. [Raw read]: length = 20
    1434. 0000: A3 96 F8 92 83 6C 10 D3 9F 77 63 6C AA DD 7D 62 .....l...wcl...b
    1435, 0010: 37 10 50 15 7.P.
    1436. btpool0-5, READ: TLSv1 Handshake, length = 20
    1437, Padded plaintext after DECRYPTION: len = 20
    1438. 0000: 00 00 00 00 F5 2C B2 15 9D D2 F9 8B 65 F8 23 74 .....,......e.#t
    1439. 0010: 61 B3 38 47 a.8G
    1440. *** HelloRequest (empty)
    1441. btpool0-5, SEND TLSv1 ALERT: warning, description = no_negotiation

  • IPhone dead because of failure to update iOS, Apple ask me to buy a replacement phone at $269, ridiculous!

    I've tried to update the iOS for my iPhone 5S thru wifi, but it was failure. The next day my phone cannot be turned on. Plugging the phone into iTunes and said I cannot update the iOS, and required me to restore it back to factory setting - while i try to do that, it said there is error occured and cannot allow me to restore it to factory setting! I scheduled an appointment and bring the phone to Apple store, once they know the error code is 2009, they ask me to buy a replacement phone at $269. What did I do? Failure update iOS is not my problem, and now it ask me to buy another phone? My phone is still good, no damage and not even falling on the floor once! I keep it in perfect condition and they said my phone has HARDWARE problem. Ridiculous!!

    Hi Just try this once more Turn iPhone off Connect lead to usb on PC Press & hold power button down  DONOT  let go Connect lead to iPhone keep power button pressed until you see iPhone on your PC. Good luck. Brian

  • Application Launch Failures after Update: shared library error

    Soon after installing the latest Security and Operating System Updates, I discovered that I could no longer run Microsoft Office. I get the following error message when attempting to open any of the components: Application Launch Failure The application "Word" could not be launched because of a shared library error: "3<Microsoft Word><CarbonLib><CFMPriv_CommonPanels>" I have tried reinstalling the updates but it hasn't helped. I can't reinstall Office because the same error message comes up when I try to open the Microsoft installer. Can anyone help? I'm stuck. Thanks.

    Again, thanks.
    It's somewhat confusing. The folder /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework
    contains 3 items, a gray screen marked Common Panels with a small arrow pointing to the lower left edge, a folder marked Versions (which holds folders marked A and Current), a folder marked Current (which has a small arrow pointing to the lower left edge and holds a gray screen marked Common Panels and a folder marked Resources) and a folder marked A (which also contains a gray screen marked Common Panels and a folder marked Resources. When I click the gray screen marked Common Panels, I get a message that there is no default application specified to open the document "CommonPanels".
    I'm not sure what all that means. Are there too many Common Panel screens? Does the small arrow have any significance? I've also discovered that, in addition to not being able to run Office, I can't install any new applications (same CarbonLib error message). If you think I need to archive and install the System, I can try to do so.

  • Failure configuring updates

    I went to shut my pavillion touchsmart 14 down and it took about 30 minutes for it to say failure configuring windows updates reverting changes. Its been saying that for about 2 hours now. I have popped out the battery and held the power button down for 15 seconds and it still reverting changes. Anyone have any advice?

    Hello @ArmyWife413, welcome to the HP Forums.
    It appears that the notebook was doing some updates, that during this you received an error indicating that the updates failed to configure. I will try to assist you with this.
    Here is a Microsoft document on the issue: "Failure configuring Windows updates. Reverting changes. Do not turn off your computer" error when y....
    I would like you to start by following that document and the steps that they have provided.
    Please let me know how this goes for you.
    Thank you for posting on the HP forums.
    I worked on behalf of HP.

Maybe you are looking for