Failure saving file (myVI).htm​l
I get this error message when I try to print my vi documentation as an HTML file. Anyone else and how can I fix it?
PaulG.
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind except that you happen to be insane." -- George Orwell
Here you go ...
PaulG.
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind except that you happen to be insane." -- George Orwell
Attachments:
html error.png 8 KB
Similar Messages
-
Failure saving file .html when printing front panel
Hi,
i´m trying to print the front panel of my VI, selecting HTML file option and it reports an error and doesn´t create the html file. Only if i select black and white on the html printing options i get a file, but i need it in colour. It happneds only with one VI but this failure didn´t use to appeard.
Recently i´ve install labview2011 and this project came from labview2010, which is still on system.
Thanks and excuse my pour and rusty english.hi Ángeniero
could you please post your vi?
thanx
Renn
Kudos always welcome for helpful posts -
when i save something, it is saved as a file and htm. i never had this with internet explorer. how do i just save as i would presume htm?
Are you talking about IE's MHT or MHTML format for saving webpages in a single file format? <br />
http://en.wikipedia.org/wiki/MHTML
Two Firefox extensions that will "do" MHT files. <br />
UnMHT extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/unmht/<br />
Mozilla Archive Format - MAF <br />
https://addons.mozilla.org/en-US/firefox/addon/mozilla-archive-format/ -
Problems saving Files on Lion-Server
My colleagues frequently report problems saving files stored on our Lion-Server machine. This usually applies to Photoshop CS6 documents but has been reported fpr MS Word .docx-Files as well. Usually the problem can be circumvented by savin the files in question on the local machine and later copy them back to the server.
Unfortunately the errors happen at random times where I usually have no access to either the cient computer or the server so I have no clue of wht is going wrong.
The Server-Logs, especially the AppleFileServer Logs don't show any information related to anx client side error message.
The only thing I see are entries in /var/log/system.log reading something like
"Jul 9 15:36:14 servername AppleFileServer[1368]: MDSChannelPeerCreate: (os/kern) invalid argument"
I'm not sure, if these messages are related to the failure of saving files, but they are the only clue I have so far.
Has anyone experienced similar problems or better has a solution to avoid thes errors entirely?My colleagues frequently report problems saving files stored on our Lion-Server machine. This usually applies to Photoshop CS6 documents but has been reported fpr MS Word .docx-Files as well. Usually the problem can be circumvented by savin the files in question on the local machine and later copy them back to the server.
Unfortunately the errors happen at random times where I usually have no access to either the cient computer or the server so I have no clue of wht is going wrong.
The Server-Logs, especially the AppleFileServer Logs don't show any information related to anx client side error message.
The only thing I see are entries in /var/log/system.log reading something like
"Jul 9 15:36:14 servername AppleFileServer[1368]: MDSChannelPeerCreate: (os/kern) invalid argument"
I'm not sure, if these messages are related to the failure of saving files, but they are the only clue I have so far.
Has anyone experienced similar problems or better has a solution to avoid thes errors entirely? -
Saving files to a specific folder
I used to be a PC, now I am a Mac, learning fast, but I have a problem in saving files from the web. I am using OS 10.4.7
I am using Firefox and Thunderbird.
When I try to save email or a picture from a web site I am presented with a Menu; Save as, Where and Format. The 'Where' is the problem.
When I click 'WHERE', I am presented with a list;
Network
Mac HD 80
Mac HD 60
Desktop
MCMP (HOME, where all my different folders are)
Applications
Movies
Music
Picures
When I click on MCMP, my home with all my sub folders, there is no way to save the file any place but just in MCMP. I have no options which folder in MCMP or sub folder of a main topic folder. Saving to MCMP just puts the file in with all my different folders.
How do I direct exactly which folder the item is to be saved into.
Thank You
WM300wm
Spring loaded folders: Drag a file to a flder, hold it over it and the folder will open. You can use this to drop files into sub folders and so on. The timing on how long you have to hold is controlled in the Finder preferences -> General Pane.
Another possibilty for your original question is to use Default Folder X, a shareware, that makes navigating open and close dialogues very easy.
http://www.stclairsw.com/
Regards
TD -
Authenication needed when moving or saving files to a folder
I've been online searching but can't find a resolution to disabling having to authenticate when moving or saving files to any folder.
I read something about using Terminal and tried the suggestion which was typing in
sudo chawn -R yourshortname . Then putting in my password when prompted. It either will not type my password or not accept it.
Can anyone help? ThanksYou can't disable or correct it with that command. See http://discussions.apple.com/thread.jspa?threadID=1216618 for more information.
-
Saving file to network location
Hello all of you,
I encounter an issue with InDesign CS5 when it comes to opening and saving files to a network location. I added my company's ftp server to Windows 7 and it appears correctly in the My computer overview (there's an additional line besides the hard discs, DVD player, et cetera). The connection to the server functions fine, no issues here. No problem exists when opening files from this server from within InDesign; I can do whatever I want. Only when I try to save a file the network location isn't displayed anymore within the My computer overview in the InDesign "Save as" dialog box. The network location however appears in the pull-down menu at the top of the dialog box (and nested as part of My computer ...), but when I pick it there, it won't show the context of the server. Additionally logging onto the server (it's IP-based and anonymous logon) doesn't change a thing. Trying to save in the empty server space InDesign returns a "Can't save here" error message.
Does anyone know how to solve this issue? Building the document locally and then copying back to the server isn't a solution, because all external content that is linked in the document resides on the server.
Best regards,
Luc PeulenDoes anyone know how to solve this issue? Building the document locally and then copying back to the server isn't a solution, because all external content that is linked in the document resides on the server.
Scott is basically right. Lots of ID users work over network connections without issue, but if something is going wrong, it's the first place to look. I wouldn't have thought it possible to work in InDesign over a FTP connection!
If you can get Windows to access that server as if it were just another drive (using "Map network drive" in Explorer) then it should work normally. However, a generic Adobe phone tech wouldn't help you figure out why it wouldn't work - there are simply too many variables in a network environment for a generic first-level tech to figure out.
In the short term, the only solution I can suggest is:
Retrieve all of that external content that is linked in the document, and the InDesign document, at the same time, & store it on your local hard drive.
Do your work.
Save & package.
Upload the entire package back to the server.
Long-term, you'd need to talk to your own IT staff to troubleshoot the connection between your workstation and the FTP server. If you can get information about your network from them to post here, I bet that someone will make suggestions to pass on to your IT staff that will actually work. -
can't figure out why the gif file won't loop. Set up 5 photo frames 480x320pixels x 72pix/in in PE11, creating a layer for each. Each layer visible. Saved for web. Checked animate. The preview plays fine. But when I save the file and then click on the saved file to play, it re-opens the layers instead of playing the loop. The only SAVE option that shows up is "IMAGES ONLY"
Using photoshop elements 11 on MAC 10.6.8. Either I'm setting this up wrong or is there a hidden setting I need to change?Thanks for the thought, Barbara B. Not sure if this counts, but emailed the file to myself [different email account, same computer] but it would not play as an email attachment. Any suggestions for a web upload where I can test your suggestion? Seems like there should be a different save option other than IMAGES ONLY but that is the only option I'm given.
-
Unable to load file login_page.htm
Good afternoon:
I've installed a UCM 10g for a proof of concept and everything was working fine until today when the login page has disappeared. When I got to the UCM web page everything is ok until I try to login, I get this error:
Unable to load file login_page.htm: File c:/oracle/ucm/server2/data/users/login_page.htm is not present.
I don't know where the login page go, it's not there. Yesterday it worked ok.
What can I do? please any help....
More info:
Using windows XP SP2, IIS 5.1, Oracle XE as database.Well, the only way to fix this error was to install a new server.
-
Office 2013 applications cannot be made to show the "Documents" folder when opening and saving files
(Windows Server 2012R2 and Windows 8.1 PRO)
We are redirecting the user's "Documents" folder to the network (using Folder Redirection). The OS hides this fact however, and most applications simply see the "Documents" folder when opening or saving files, including Office 2003.
Office 2013 however displays the actual path, which in this case is:
\\sever1\redirect$\username\documents
Even if you forcibly set the "Default local file location:" in the Options Save area to the 'Documents' folder in, say, Word, Word immediately converts the local path to the network path.
Is there anyway to get Office 2013 to follow the virtual path? All of other apps follow it and expose the users only to "Documents".
Thank you so much.
DanaThere's nothing in my FAQ concerning screen savers, so I'm unsure why you decided to take that approach. From your description, it looks like you only tried a few of the suggestions before throwing in the towel. That's fine, it's your call.
I don't have the problems you described with 10.4.7. Usually when folks have problems after an update, these are caused by either installing an update on an already-corrutped system or they've installed third-party applications or hardware that have been rendered incompatible by the update.
Before installing software updates, you may wish to consider the advice in my "Installing Software Updates" FAQ. Taking the steps therein before installing an update often helps avert problems and gives you a fallback position in case trouble arises.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have numbers synced to iCloud.
I tried to undo it but the app crashed.
I am hoping there's like a previously saved version of my file in iCloud somewhere.No, iOS does not do short term incremental back ups to iCloud such as you get with Time Capsule.It backs up when you do soo manually, or if set properly, when the device is plugged in and connected to WiFi. It will not have saved your changes as of 10 minutes prior.
-
How can I revert to a previous saved file?
Hi,
I have been working on Word for Mac 2011 and have been saving continuously onto the same document as my work progresses. I always reference manually and somebody suggested I use footnotes to reference. This was too problematic as I needed to reference separately
at the end of three sections and footnotes was only allowing me one lot of references. So I copied and pasted my other two sections underneath the footnote referencing and Word must have assumed it was part of the footnotes because when I completed my
work and went back to re-reference each section manually and delete the old footnote references, I lost all my work done underneath the footnotes! Now, I hear you can "revert to previous saved file" or some other such thing to go back to a
previous save of the same document. Any help is greatly appreciated on how to do this!!
Thanks,
AyemaIf you haven't saved the document, pressing Command+Z will undo the paste.
If you have already saved the file then hopefully you have the option set in preferences to Always Create a Backup and in the folder where the original file is locate you will find a file name "Backup of..." the file name you are working on. This
will be a how the file looked prior to the last save.
If you don't have the Always Create a Backup option set, besides "Shame on You" then go to your Time Machine backup which should be no more than 1-hour old and you can get previous hours... assuming you have that function enable. If you don't then
again... Shame on You!
If you have neither of these built-in options set then I pray you are using my
GotUrBack application running, which will protect you with up to 9 levels of backup of your saved version of the file.
http://www.greatcirclelearning.com/zapps-got-ur-back
And if you don't have any of the above set or running then I'm sorry to have to say... you are out of luck and have a great deal of file recreation to do.
Kind Regards, Rich ... http://greatcirclelearning.com -
Error in saving file. this is an usual error.
"error in saving file. this is an unusual error. perhaps some computer maintenace is required"
This notice keeps coming up whenever i try and save an audio file, which i have generated with "final vinyl".
I have no idea what to do next. If anyone has any suggestions i would be most grateful.
Adnan SharafThat could make them up to 300 MB a piece, since that's the same format used by CDs. I would backup your data, and check to make sure the directory is in good shape as my FAQ explains:
http://www.macmaps.com/backup.html
http://www.macmaps.com/directoryfaq.html -
Hi there,
we just switched from OSX 10.5.8 to 10.6.8
OSX was installed on a new partition of the harddisk
Then installed CS 5
Then installed CS 6 via (adobe creative cloud)
With CS6 we got also the problem with saving files to the server (program error)
It happens mostly with photoshop, sometimes with Illustrator.
I read a lot of posting regarding the same problem but didn´t found a real solution yet.
I am also wondering that there seems to be no solution for this now, because most of the posting i read are 1 year old.
Working locally is not really an acceptable workaround for us or anyone who needs to work with Creative Suite in a professional way.
Our MACs…
MAC Pro 4.1
OSX 10.6.8
Virtualized Server Solaris 10 with Helios UB+
connected to server with afp://Server IP Adress
Adobe Software
CS 5 & CS 6
Here´s some additional information from the osx system profiler:
Hardware-Übersicht:
Modellname: Mac Pro
Modell-Identifizierung: MacPro4,1
Prozessortyp: Quad-Core Intel Xeon
Prozessorgeschwindigkeit: 2,26 GHz
Anzahl der Prozessoren: 2
Gesamtzahl der Kerne: 8
L2-Cache (pro Kern): 256 KB
L3-Cache (pro Prozessor): 8 MB
Speicher: 10 GB
Geschwindigkeit für Prozessorverbindungstyp: 5.86 GT/s
Boot-ROM-Version: MP41.0081.B07
SMC-Version (System): 1.39f5
SMC-Version (Prozessormodul): 1.39f5
Seriennummer (System): CK9120Z98Q0
Seriennummer (Prozessormodul): J590807P51LUC
Hardware-UUID: 30149BDB-582E-583A-B776-59A6DEA2A32C
Ethernet 1:
Typ: Ethernet
Hardware: Ethernet
BSD-Gerätename: en0
IPv4-Adressen: 192.9.200.120
IPv4:
Adressen: 192.9.200.120
Konfigurationsmethode: Manuell
Schnittstellen-Name: en0
Netzwerksignatur: IPv4.Router=192.9.200.203;IPv4.RouterHardwareAddress=00:30:48:ba:70:30
Router: 192.9.200.203
Teilnetzmasken: 255.255.255.0
DNS:
Such-Domains: floramedia.int
Serveradressen: 192.9.200.7, 194.25.0.68
Ethernet:
MAC-Adresse: 00:23:df:df:96:e1
Medienoptionen: Voll-Duplex
Medien-Untertyp: 1000baseT
Proxies:
Ausnahmeliste: *.local, 169.254/16
Passiver FTP-Modus: Ja
Reihenfolge der Dienste: 0
Überblick über die Systemsoftware:
Systemversion: Mac OS X 10.6.8 (10K549)
Kernel-Version: Darwin 10.8.0
Startvolume: MAC_OSX_10_6_x_SNOW-LEOPARD
Startmodus: Normal
Gerätename: Freelancers Mac Pro 10.6.8
Benutzername: DENNIS (freelancer)
Sicherer virtueller Speicher: Nicht aktiviert
64-Bit-Kernel and -Erweiterungen: Nein
Zeit seit dem Start: 8:09Hi franverdi-
It sounds like you've run into issues from the upgrade. I've found a Support article that helps with issues of not being able to connect after an upgrade:
[[Cannot connect after upgrading Firefox]]
I hope that helps! -
Saving files for metro apps in Windows 8/8.1 when printing
Hi,
I have a query regarding saving files for metro apps Windows 8/8.1.
Metro apps saves the file automatically to the Document folder when we print.
But I would like to save the files into a recommened folder like C:\users\tmp\
Please suggest me, is there a way to save the files to a particular folder for metro apps in Windows 8/8.1.
Thanks in Advance
Regards
Toshik12As far as I know (and I may be wrong), there's no built-in file saving when printing documents. How are you confirming that?
You can save the file anywhere you want, as long as the user chooses the folder location using the FolderPicker.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.
Maybe you are looking for
-
Hi All, I am new into Web DynPro . I have the requirement to work on Web Dynpro. How to create an WD application? Any body have documentation (step by step), please send me asap. I am very thankful to you all in advance. Thanks & Regards, Nagarjuna.
-
Hello, I have a SharePoint 2013 with four web applications. These web applications are extended to provide access https. Is it possible to disable in iis web applications with http to force users to access https ?, in case if possible, is it advisabl
-
I am unable to use my bookmarks since IIS comes up on my screen.
IIS is interfering with my use of bookmarks. When the IIS appears it is like greek. The only word I can read is welcome which goes to another screen, none of which I want to use. How do I reach my bookmark for my bank so that I do my bill pay?
-
Color Labels No Longer Available in Bridge
I recently lost my computer and had to upgrade to Windows 7 64bit. I also had to install CS2 first because my upgrade path is from CS2. I now have CS4 installed. The problem is that I can no longer label an image in Bridge by color. The imgaes I
-
Can we expect firmware to fix album art glitches?
I bought a 5.5g 80gb iPod less than a month ago, and while things generally seem to be working great, I am continually experiencing glitches with album artwork. I've got 6000+ songs to which I meticulously assigned album artwork, and it seems that ev