Failure starting a script in uccx9
Hi
I am installing a new uccx based in a copy of the customer with a version 6. All have been copied, CTI RP are registered in CCM, application mgmt, prompts and scripts are uploaded yet in uccx9 and agents are logged in EM.
The script is for a contact center, a call enter to contact center, look for a free agent logged and send the call, when i call to the dn trigger, enter the call to the agent but agent (in my Pc i am testing) can not respond the call, only see the ANI and DNIS and i ear a system prompt "we are sorry the system is not responding..."
I checked in service parameters "user prompts overrides system prompts" be in enable.
What other things could i check?
Thanks!!
Hi Anthoni
Thank for your reply, i have checked what you said and is ok, CSS selected is for national calls, including internal, and partition are all dn in the same, internal DN.
Probing other scripts i see a similar problem, enter the user prompt, and after it the same system prompt "system is not responding...." script can not launch dn of the agents.
Any idea?
Thanks!!
Similar Messages
-
Start up script fails; Unable to boot...Please, Help.
This is my first major problem that I have had with this computer. It has been running fine until this past Sunday night. I was running AOL, Firefox & iTunes. The computer was running slow and iTunes was skipping frequently. I rebooted and resumed my activities only to have the same problems and the computer booted slower than usual. I closed all my applications and rebooted once again. Then, I ran Disk Utility had used Verify Disk. It found an error on my system volume stating an incorrect block count in one sector and referenced a file cache_003, all other volumes passed. Disk Utility was unable to repair the volume. Repair Disk ran slow. I did a search for the file cache_003 and discovered that it was part of a Netscape profile back up on a different partition. I deleted the profile and used Disk Utility again. This time, the system volume passed and a different volume failed due to incorrect block size, Repair Disk failed. The next time I tried to boot the computer the gray screen with apple and loading indicator came up and stayed for several minutes followed by a blue screen with loading indicator for several minutes and stayed blue for nearly 40 minutes. Eventually, the screen went black and displayed that the start up script failed. Here is some of what was displayed.
Darwin/BSD(Computer Name-Computer.local)(console)
System Starter[35]
login date&time Internet Sharing[96]:Libinfo[Socket_open():2318]connect():2318]connect:()connection refused (This line repeated continuously)
I am able to input commands at this stage but I am not knowledgeable enough to know what to do.
When I push the power button to turn it off the computer beeps once and the led light flashes three times and turns off.
Each time when I attempt to boot either into Safe Mode or from the Software Install DVD I encounter the same problem.
Now, Monday night by chance on another boot attempt the computer started up although it took about 20-30 minutes. It was missing one volume which showed up in Disk Utility under a different name. While I had the computer up I backed up what I could on the volumes that mounted. One file I was unable to burn using Toast 9 due to a data fork error. The computer eventually froze during my activities and since I have had no luck at my start up attempts and have had the same problem. Luckily, I was able to back up everything I needed with the exception of what was on the AWOL volume.
The last thing I had installed recently was the latest Security Update which went fine and was two days before the trouble started.
I am at a loss for what to do next. I would like to retrieve the files on that one volume but at this point if I can start up I would just like to reformat and install the OS.
Any help with this problem would be much appreciated. Thank you.Well, originally when I ran Disk Utility, although it performed slower than usaual it found the error as previously mentioned and was unable to Repair Volume. As to using the Hardware Disc & Install Discs(original & Tiger) the computer failed to boot although you could hear the disc spinnning for awhile. In both and every instance regardless of any or no disc, the computer starts the boot process and you see the gray screen with white apple and loading indicator for about 3 minutes then it switches to the blue screen with loading indicator. After quite some time the loading indicator goes away and it's just a blue screen for nearly a half-hour followed by a black screen which starts the above prompt. I can post all of what that said later as I have written all of it down at home, a portion of it is in my original post. The start up chime doesn't sound at all. I do get a tone and flashing LED lights when I hold the power button down to turn it off after the above described boot process. There is not much I can do except try and try again. I may need to get a new hard drive but I would like to resolve it without doing so if possible. When trying to boot from both discs I was holding down the C key as directed and I have tried just letting the computer boot with disc in drive without any key interaction.
-
How do I start the script for Photoshop CS6 in Bridge CS6 image processor ?
I am new to Bridge and I am lookiing for a way to batch process images. I opened 'preferences' and did not find Photoshop CS6 under the script list. How do I open and run the image processor? Thanks for any help!!
I have clicked on 'tools' within Bridge but there is no 'Photoshop' in the drop-down menu.
Misread your post a bit and see you want the image processor, however, this should be in the same location as the Batch option. If you don't have Photoshop in that list it means the start up script is not active or not installed properly.
First check Bridge preferences / Start up scripts and see if Photoshop is listed inhere and has a checkmark in front. If no checkmark then set it to on, restart Bridge and try again. If no Start upScript at all first try restart Bridge holding down option key (Mac) or ctrl (Win) and choose reset preferences.
If still no luck try a reinstall of PSCS6 to also reinstall Bridge again. (you first have to uninstall PSCS6, be sure to have a back up of custom settings etc). -
Problem with auto start-stop script
Hi to All,
Logged as root. I have create in /etc/rc.d/init.d this file and saved as dbora (Oracle Linux 5.4):
+#!/bin/sh+
+# chkconfig: 345 99 10+
+# description: Oracle auto start-stop script.+
+#+
+# Set ORA_HOME to be equivalent to the $ORACLE_HOME+
+# from which you wish to execute dbstart and dbshut;+
+#+
+# Set ORA_OWNER to the user id of the owner of the+
+# Oracle database in ORA_HOME.+
ORA_HOME=/u01/app/oracle/product/10.2.0/db_1
ORA_OWNER=oracle
+if [ ! -f $ORA_HOME/bin/dbstart ]+
then
echo "Oracle startup: cannot start"
exit
fi
case "$1" in
+'start')+
+# Start the Oracle databases:+
+# The following command assumes that the oracle login+
+# will not prompt the user for any values+
su - $ORA_OWNER -c "$ORA_HOME/bin/dbstart $ORA_HOME"
touch /var/lock/subsys/dbora
+;;+
+'stop')+
+# Stop the Oracle databases:+
+# The following command assumes that the oracle login+
+# will not prompt the user for any values+
su - $ORA_OWNER -c "$ORA_HOME/bin/dbshut $ORA_HOME"
rm -f /var/lock/subsys/dbora
+;;+
esac
After creation I have execute:
*#chmod 750 /etc/rc.d/init.d/dbora*
*#chkconfig --add /etc/rc.d/init.d/dbora*
The last command return this message:
+"service dbora does not support chkconfig"+.
Can You help me? Have You an idea ?
Thank You and best regards
Gaetanosb92075 wrote:
Oracle RDBMS needs to be started by process running at OS level as owner of Oracle software; typically OS user "oracle" & not as ROOT!Ok,
But I have founded this script at [http://www.oracle-base.com/articles/linux/AutomatingDatabaseStartupAndShutdownOnLinux.php].
The article report:
Article
When using RAC or ASM under Oracle 10g Release 2 or above, the Oracle Clusterware automatically starts and stops the Oracle database instances, so the following procedures are not necessary. For all other cases, you can use the methods described below.I must suppose, that the author has written an incorrect article?
Best Regards
Gaetano -
Issue with SQL Developer 4.1 Early Adopter 2 - start sql-script by "@"
Hi,
today i realized, that starting a sql-script by writing @scriptname.sql in a sql worksheet and press F9 to start the script, does not work anymore.
With EA2 there is always an error message shown like "unkown command" with some strange characters "�������������������������������" in the script logging window.
The sql-scripts are located in a filesystem folder the os environment variable SQLPATH points to.
In Version 4.0.x this worked perfect! Is this a planned "feature" or just a bug in EA2 fixed in later EA versions?
In addition, when i open such a sqlscript with the file open menu in sqldeveloper the content of the sqlscript is not shown in the script window. There are only some none printable characters "�����" displayed in the sqlworksheet, and not the "select ..." a normal texteditor shows.
Thanks in advance
MatthiasHi,
with encoding set to utf8 it does not work. Don't know why. After setting the encoding to "cp1252" everything works fine again! Thank you very much!
Matthias -
Hi to All,
I have create as root in /etc/init.d the file dbora:
+#!/bin/sh+
+# chkconfig: 345 99 10+
+# description: Oracle auto start-stop script.+
+#+
+# Set ORA_HOME to be equivalent to the $ORACLE_HOME+
+# from which you wish to execute dbstart and dbshut;+
+#+
+# Set ORA_OWNER to the user id of the owner of the+
+# Oracle database in ORA_HOME.+
ORA_HOME=/u01/app/oracle/product/10.2.0/db_1
ORA_OWNER=oracle
+if [ ! -f $ORA_HOME/bin/dbstart ]+
then
echo "Oracle startup: cannot start"
exit
fi
case "$1" in
+'start')+
+# Start the Oracle databases:+
+# The following command assumes that the oracle login+
+# will not prompt the user for any values+
su - $ORA_OWNER -c "$ORA_HOME/bin/dbstart $ORA_HOME"
touch /var/lock/subsys/dbora
+;;+
+'stop')+
+# Stop the Oracle databases:+
+# The following command assumes that the oracle login+
+# will not prompt the user for any values+
su - $ORA_OWNER -c "$ORA_HOME/bin/dbshut $ORA_HOME"
rm -f /var/lock/subsys/dbora
+;;+
esac
After I have execute:
*#chmod 750 /etc/init.d/dbora*
*# ln -s /etc/init.d/dbora /etc/rc.d/rc0.d/K01dbora*
*# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora*
*# ln -s /etc/init.d/dbora /etc/rc.d/rc4.d/S99dbora*
*# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dbora*
At last
*#chkconfig --add /etc/init.d/dbora*
This message is returned
dbora service don't support chkconfig.+
Have You an idea ?
Thank You and best regards
GaetanoSolved !
I have inserted a space before chkconfig and description in the script:
Incorrect Code:
#!/bin/sh
# chkconfig: 345 99 10
# description: Oracle auto start-stop script.
This is the correct code
#!/bin/sh
#chkconfig: 345 99 10
#description: Oracle auto start-stop script.Bye
Gaetano -
Windows SAP Start/Stop Scripting
Hi all,
We are working in SAP Start/Stop Scripts in Windows + SQL Platform.
We need some help from your side.We run the command to stop SAP & then SAP is stopped.If SAP is not stopped,next service stop command should not run.
How can i write in Script & also from which command for SAP Stop. I can get the RC.
Please help me on this ?
Thanks,
Richa
Edited by: Richa Saran on Sep 14, 2011 9:18 AM
Edited by: Richa Saran on Sep 14, 2011 9:18 AMI run the command sapcontrol -nr %erppno% -prot PIPE -function StopWait 60 10.
SAP Stopped in MMC .
My Next Command is stop SAP Services {NET STOP %servicename% (SAPSID_NO)}
I want to write the command in Script that NET STOP command will be detect or check that SAP Instance is stopped & then run Service stop command.
Please help me on this topic. -
Start up script for EPM 11.1.2 in Unix or Windows...
Is there a sample start up script for starting required services in EPM 11.1.2 ?
I saw that the Program Files item for EPM, has a link to some start up script but
it starts everything and it seems to refer to many scripts and seem complicated.
Is there a simple script for EPM 11 ? In System 9, I used Net Start to start services in a batch file and
used Sleep command between commands to give enough time for the services. But it would be nice
if there is a script which automatically checks to make sure to start the next service only after a dependent service has started.
cheers
ZSimple examples for EPM11.1.2.1 on Windows env.
epmStart.bat
@ECHO OFF
ECHO EPM 11.1.2.1 STARTING / Batch EPM full start script by Antun Kulkov, 2011
ECHO See more at http://silw.blogspot.com
ECHO SQL Server Starting
sc start "MSSQLSERVER"
waitfor NONEXISTINGSIGNAL /T 5
ECHO Oracle Process Manager (ohsInstance)
sc start "OracleProcessManager_ohsInstance1649849633"
waitfor NONEXISTINGSIGNAL /T 10
ECHO Oracle Process Manager (EPM_epmsystem1)
sc start "opmn_EPM_epmsystem1"
waitfor NONEXISTINGSIGNAL /T 10
ECHO Oracle Process Manager (ConfigurationManager)
sc start "OracleEpmSystem_Administratord_oracle_middleware_user_projects_epmsystem1ConfigurationManager"
waitfor NONEXISTINGSIGNAL /T 10
ECHO Hyperion RMI Registry
sc start "Hyperion RMI Registry"
waitfor NONEXISTINGSIGNAL /T 10
ECHO Hyperion Foundation Services - Managed Server
sc start HyS9FoundationServices
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Administration Services - Web Application
sc start HyS9eas
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Integration Services
sc start "Essbase Integration Server"
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Provider Services - Web Application
sc start HyS9aps
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Studio Service BPMS
sc start "Hyperion Studio Service BPMS bpms1"
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion EPM Architect - Process Manager
sc start EPMA_Server
waitfor NONEXISTINGSIGNAL /T 30
ECHO Hyperion EPMA Data Synchronizer - Web Application
sc start HyS9EPMADataSynchronizer
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion EPMA Web Tier - Web Application
sc start HyS9EPMAWebTier
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion CALC Manager - Web Application
sc start HyS9CALC
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Planning - WebHyS9Planning Application
sc start HyS9Planning
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Web Analysis - Web Application
sc start HyS9WebAnalysis
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Reporting and Analysis Framework
sc start HyS9RaFrameworkAgent
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Financial Reporting - Web Application
sc start HyS9FRReports
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Reporting and Analysis Framework - Web Application
sc start HyS9RaFramework
waitfor NONEXISTINGSIGNAL /T 5
ECHO ALL DONE!
waitfor NONEXISTINGSIGNAL /T 10
ECHO Oracle EPM System has been started.
epmStop.bat
@ECHO OFF
ECHO EPM 11.1.2.1 STOPPING / Batch EPM full stop script by Antun Kulkov, 2011
ECHO See more at http://silw.blogspot.com
ECHO Hyperion Web Analysis - Web Application
sc stop HyS9WebAnalysis
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Reporting and Analysis Framework
sc stop HyS9RaFrameworkAgent
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Financial Reporting - Web Application
sc stop HyS9FRReports
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Reporting and Analysis Framework - Web Application
sc stop HyS9RaFramework
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Planning - WebHyS9Planning Application
sc stop HyS9Planning
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion CALC Manager - Web Application
sc stop HyS9CALC
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion EPMA Web Tier - Web Application
sc stop HyS9EPMAWebTier
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion EPMA Data Synchronizer - Web Application
sc stop HyS9EPMADataSynchronizer
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion EPM Architect - Process Manager
sc stop EPMA_Server
waitfor NONEXISTINGSIGNAL /T 30
ECHO Hyperion Studio Service BPMS
sc stop "Hyperion Studio Service BPMS bpms1"
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Provider Services - Web Application
sc stop HyS9aps
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Integration Services
sc stop "Essbase Integration Server"
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Administration Services - Web Application
sc stop HyS9eas
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Foundation Services - Managed Server
sc stop HyS9FoundationServices
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion RMI Registry
sc stop "Hyperion RMI Registry"
waitfor NONEXISTINGSIGNAL /T 10
ECHO Oracle Process Manager (ConfigurationManager)
sc stop "OracleEpmSystem_Administratord_oracle_middleware_user_projects_epmsystem1ConfigurationManager"
waitfor NONEXISTINGSIGNAL /T 10
ECHO Oracle Process Manager (ohsInstance)
sc stop "OracleProcessManager_ohsInstance1649849633"
waitfor NONEXISTINGSIGNAL /T 10
ECHO Oracle Process Manager (EPM_epmsystem1)
sc stop "opmn_EPM_epmsystem1"
waitfor NONEXISTINGSIGNAL /T 10
ECHO SQL Server Stopping
sc stop "MSSQLSERVER"
waitfor NONEXISTINGSIGNAL /T 5
ECHO ALL DONE!
waitfor NONEXISTINGSIGNAL /T 10
ECHO Oracle EPM System has been stopped. -
Service start stop scripts and Nagios scripts
Hello. Are there some "official" service start stop scripts somewhere? And: Has somebody already written a Nagios monitoring script for Oracle NoSQL? Thanks, Jesus.
Hi. Yes, but I mean something like service kvclient start / stop / restart / status, and using e.g. daemon without nohup. Of course one can be written, e.g. I have a simple one based on a script I found in internet long time ago for Cassandra, but then by Murphy's Law you will probably have an "official" one in the .124 version : - ).
-
Hi all.. I'm Running OS 10.4.8 and I need to have one of the profiles automatically Logging In for back up purposess and that is the only thing that the profile is going to be used for. and I'm wondering if there is a way.. like holding a key down while powering up the system. for it to load the logging in list instead of automatically going to the profile that I want to use to run the back up program from...The help file says to hold the left shift key when the spinning wheel shows... but that is not working. it keeps going into the profile that has the auto log in enable....... A second question since I'm here ... Is there a way (liket a start up script) to have the profile that is auto logging in start in... I think is called safe mode like when you hold the shift key down so the start up items don't start..??
I should mention... the profile in question is a managed profile.. in the systems pref. the only things with a check mark are the back up program and the allow supporting programs....
TIA
Oscar.
iMac 20 Mac OS X (10.4.4)I got it... found the anw. in Macworld... the shift key is supposed to be held after the grey screen. while on the progress screen with the blue background.. .. In case some one else needs the aswer
-
How to start radeon script during boot?
My system hangs during startx. I have got input what to do but now, I need to create my own systemd.service file to start the script during boot. I have made following /etc/rc.local:
modprobe -r radeon
modprobe -r drm
modprobe radeon modeset=1
and get 644 permissions.
To start this service have I tried /etc/systemd/system/rc-local.service
[Unit]
Description=/etc/rc.local
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/etc/rc.local
[Install]
WantedBy=multi-user.target
and systemctl enable rc-local.service
When I boot the system I get the error:
Failed to start /etc/rc.local
Any suggestion will be appreciated.I think it would be better to launch startx manually and look at the output! I also have a radeon card and use the oss driver. Nothing has to be done for it to work. Are you sure you haven't messed up something else? Something weird in your grub config? What about your files in /etx/X11/xorg.conf.d? Remove every "improvement" you tried to do, I'm pretty sure startx will work just fine then.
-
Dhcpcd hook problem: start python script within hook
Dear fellow Arch fans,
I'm encountering a rather annoying problem:
When I lose my internet connection my pidgin client doesn't get 'informed' about this and I won't receive IMs for an unspecified amount of time. I thought that I could work around this by myself, therefore I wrote two scripts in Python which connect/disconnect all active Pidgin-accounts using DBus. Both of them work fine. I also wrote a dhcpcd hook which should "listen" for a "NOCARRIER" and a "BOUND" reason which for itself also works fine (puts some output in a logfile).
The problem now is to invoke the python scripts from within the hook. My hook looks as follows:
lf='/var/log/myhook.log'
case $reason in
NOCARRIER)
echo "nocarrier branch" >> $lf
sudo -u os python2 /usr/lib/dhcpcd/dhcpcd-hooks/\
scripts/pidgin_dbus_discon.py >> $lf
BOUND)
sudo -u os python2 /usr/lib/dhcpcd/dhcpcd-hooks/
scripts/pidgin_dbus_con.py >> $lf
echo "bound branch" >> $lf
echo $reason >> $lf
esac
A sample output from the logfile /var/log/myhook.log after two cable pulls looks like
nocarrier branch
CARRIER
bound branch
nocarrier
CARRIER
bound
But even on unsuccessful invocation the pidgin_dbus_con.py-script should at least print
con-script started
con-script finished
Does anyone have a clue what the problem might be here?
I would appreciate any help!
os
Last edited by os (2010-12-29 13:47:15)If I enable dhcpcd like this: "systemctl enable dhcpcd", i.e. w/o using an interface name, it kind of works:
May 16 19:42:57 epbyminw1076 dhcpcd[315]: eno1: waiting for carrier
May 16 19:43:01 epbyminw1076 dhcpcd[315]: eno1: carrier acquired
May 16 19:43:01 epbyminw1076 dhcpcd[315]: DUID 00:01:00:01:19:92:10:5e:6c:3b:e5:33:0a:0a
May 16 19:43:01 epbyminw1076 dhcpcd[315]: eno1: IAID e5:33:0a:0a
May 16 19:43:01 epbyminw1076 dhcpcd[315]: eno1: soliciting a DHCP lease
May 16 19:48:18 epbyminw1076 dhcpcd[315]: eno1: offered 10.6.44.58 from 10.6.0.3
May 16 19:48:18 epbyminw1076 dhcpcd[315]: eno1: ignoring offer of 10.6.44.58 from 10.6.0.6
May 16 19:48:22 epbyminw1076 dhcpcd[315]: eno1: leased 10.6.44.58 for 259200 seconds
May 16 19:48:22 epbyminw1076 dhcpcd[315]: eno1: adding route to 10.6.0.0/18
May 16 19:48:22 epbyminw1076 dhcpcd[315]: eno1: adding default route via 10.6.0.1
But it takes several minutes to obtain an IP-address.
Last edited by yarmash (2014-05-16 17:12:51) -
Oracle Forms Server Service cannot start by scripts (windows2k)
We have a Portal & Application Server installed (Forms&Reports 6i).
Server is Windows2000.
I have to start Oracle Forms Server service by scripts, when i manually start the process by pressing start or stop, it works & asks for nothing.
but when i write a script to stop & start oracle forms server , it stops by script.
but it fails to start & says FRM-60009 : ifsvr60 correct usage : -install [service name] exc..... so service doesnt start but when i go to services & start it manually by presing start , it starts. I dont want to install a new service just stop & start the engine.
How can i start the forms server service by a script ? (any of known commands or a way to Oracle forms server service to start by scripts ?)
Thx for Help..Hi
Have you checked that the rpd file still exists in the Repository folder? Did you leave it in a consistent state? assuming the paint.rpd is still there, double click it and see if you can open it, if so run a consistency check.
Rgds
Ed -
[Debian] Oracle 10g Express - init.d start/stop script problem + fix
I've experienced a problem with the init.d script "oracle xe" which is used to start/stop/reload the 10g server and comes with the debian package from oss.oracle.com.
I noticed that after installing Oracle 10g in the "Debian" way (via .deb package and an apt-source oss.oracle.com), the start and stop method of the script doesn't do anything.
It's checking for the value of the "ORACLE_DBENABLED" variable, which is on my installation set to "false", because I answered during installation false to the question "do you want to start Oracle 10g at system boot?".
In my opinion that's wrong. I should always be able to start/stop the Oracle server trough the init.d script regardless of your choice starting Oracle at boot or not.
I commented out row 604 and 621 in the file "/etc/init.d/oracle-xe" :
case "$1" in
start)
if test -f "$CONFIGURATION"
then
if test "$ORACLE_DBENABLED" != "true"
then
echo "exit"
# exit 0
fi
else
echo "Oracle Database 10g Express Edition is not configured. You must
exit 0
fi
start
configure)
configure
stop)
if test -f "$CONFIGURATION"
then
if test "$ORACLE_DBENABLED" != "true"
then
echo "exit"
# exit 0
fi
else
echo "Oracle Database 10g Express Edition is not configured. You must
exit 0
fi
stop
;;Hello,
I have the same problem on RH9.
[root@phpsrv init.d]# ./oracle-xe start
Starting Oracle Net Listener.
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/lsnrctl: relocation error: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/../lib/libclntsh.so.10.1: symbol semtimedop, version GLIBC_2.3.3 not defined in file libc.so.6 with link time reference
Starting Oracle Database 10g Express Edition Instance.
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus: relocation error: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/../lib/libclntsh.so.10.1: symbol semtimedop, version GLIBC_2.3.3 not defined in file libc.so.6 with link time reference
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
Regards,
Pavel Kucera -
How to start OpenScripts-Scripts with OTM
Hi
I want to execute an OpenScript-Test in OTM. It was possible to add the TestScript in OTM. When I try to execute the script pressing the "Run this test"-Link i got an error massage:
"Unable to connect to the agent system. Please ensure that the connection information is correct, and that the system is running the Oracle Load Testing for Web Applications Agent Service."
How can i start the "Oracle Load Testing for Web Applications Agent Service"?
Execute the olt-agent.exe doesn't work.
Thanks for Helpevery time i run a test in OTM its write the following in the log file in x:\OracleATS/log/agentmanager_auth.log
2010-01-28 11:00:00,937 WARN [URL:t3://xxxx:8088;Requestor Username: oats;Requestor Key:xxxxx;Requestor Queue:queue/AgentManagerStatusQueue;Request ID:1;Request:startagent;] - authentication failed
Should i start the agentManager? How?
Maybe you are looking for
-
Question on Animated GIF Timing
I have a weather-type animated GIF, and believe me, it is not my choice or idea, but anyway I need to get this working. Here it is: http://www.sendto.org/temp/weather-cvia.gif. In this animation, all the frames are set to 100 but the timing is not sm
-
VolumeWorks CANNOT expand RocketRaid 2220 RAID 5 array ! ! !
Well, I recently OCE/OLRM my RAID-0 1 TB array into a RAID-5 1.5 TB array. I noticed after that time that OS X still reported the array as the same size. I thought to myself, 'self ..... ***?' So I went into disk utility and found that I had to ADD a
-
Hi. My iMac hard drive is running Mavericks. I have an old version of Quark Xpress (3.32) which won't run in Mavericks. Can I partition my hard drive and run an older system on one partition, so I can access my Quark? Is that possible?
-
What is the difference is between PI and ALE? I do not have PI but have a requirement of sending data between sap systems. What does PI give you that ALE does not?
-
ANSI/9i Join Syntax and Pretty Code
I've always tried to keep my SQL statement code formatted in a way that I think helps readability. I picked up the following style because I found it easy to quickly find the FROM clause and the JOINS or conditions: select e.ename, e.sal,