Failure to backup to dvd in PhotoElements 9

I get the message 'error encountered while writing disc. Contact your disc drive manufacturer and upgrade to the latest available firmware for your specific disc drive before trying again'. I have downloaded all updates from Dell without success. Has anyone else had this problem?

Read this link: http://fcpbook.com/Video8.html
In short, you first need to tell FCE that the footage is anamorphic before export.
Message was edited by: skalicki`

Similar Messages

After Leopard upgrade can't burn backups to dvd, don't have "SuperDrive"???

I used the upgrade install option for Leopard and I know the are issues being reported with alot of applications but I haven't seen this one so here it goes..
Backup had an update to be Leopard compatible and so far it will backup just fine to my iDisk.
However if I try to backup to a dvd the driver that shows on the Backup program for burning says SuperDrive and I have a PIONEER DVD-RW DVR-K06 drive soooo when I try to backup to dvd it fails. I'm guessing the failure is the Superdrive vs the PIONEER DVD-RW DVR-K06 drive. System profiler states for burning I have the Pioneer drive.
The reason I would like to backup to dvd is simple, it's QUICK and since I upgraded to Leopard and did not do a "clean" install I want to be ready if that is what I will need to do to solve any issues that may arise from upgrade vs install method for Leopard. I want my info safe. I am not sure if I do a "clean" install that my info backed-up in Time Machine will be readily available or if I will have to erase my external hard drive that I use for TM to start with a "clean" Time Machine too.
Any suggestions? Enlightenment? Please be kind I am still so new at this and I have alot to learn.

Hi
There are two kinds of DVDs that You can burn/create with the same sort of DVD that You bought.
• Data-DVD - When DVD is seen on DeskTop and files added to this ===> Result is a Data-DVD and this can only be read by a computer - no DVD-Player can play it
• Video-DVD - Is the kind of DVDs that plays on DVD-players and to do this You must use a Video-encoding-burning program as iDVD or Roxio Toast™ or DVD-Studio Pro. It encodes the video in a proper way but also it structures the material in a way a DVD-Player can use. Can not be done (as far as I know of) via DeskTop/Finder.
Yours Bengt W

Error while taking RMAN back up - RMAN-03009: failure of backup command ..

Hi Experts,
I am trying to take RMAN back up but at the end I get this error message.. I found a solution at http://www.oracle-base.com/articles/9i/RecoveryManager9i.php
But this is of oracle 9i. Can I use it on 10g too ?
So is this Step correct ?
1) First create a user to hold the recovery catalog:
a) CONNECT sys/password@w2k1 AS SYSDBA
b) GRANT connect, resource, recovery_catalog_owner TO rman;
2) Then create the recovery catalog:
a) C:>rman catalog=rman/rman@w2k1
b) RMAN> create catalog tablespace "RMAN";
c) RMAN> exit
3) Register Database
a) C:>rman catalog=rman/rman@w2k1 target=sys/password@w2k2
b) RMAN> register database;
c) Existing user-created backups can be added to the catalog using: (*So far no Back up taken so I guess this step can be ignored*)
i) RMAN> catalog datafilecopy 'C:\Oracle\Oradata\TSH1.dbf';
ii) RMAN> catalog archivelog 'log1', 'log2', 'log3', ... 'logN';
4) Full Backup Configuration
RMAN> configure retention policy to recovery window of 7 days;
RMAN> configure default device type to disk;
RMAN> configure controlfile autobackup on;
RMAN> configure channel device type disk format 'C:\Oracle\Admin\W2K2\Backup%d_DB_%u_%s_%p';
5) Full back up
RMAN> run {
backup database plus archivelog;
delete noprompt obsolete;
6) RMAN> resync catalog;
Starting backup at 15-MAY-10
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00006 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ZUMA\DM_MENTOR200
60430230208_DB.DBF
input datafile fno=00002 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ZUMA\UNDOTBS01.DB
F
input datafile fno=00007 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ZUMA\DM_MENTOR200
60430230208_IND.DBF
input datafile fno=00001 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ZUMA\SYSTEM01.DBF
input datafile fno=00003 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ZUMA\SYSAUX01.DBF
input datafile fno=00005 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ZUMA\EXAMPLE01.DB
F
input datafile fno=00004 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ZUMA\USERS01.DBF
channel ORA_DISK_1: starting piece 1 at 15-MAY-10
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/15/2010 05:11:
03
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 52428800 bytes disk space from 2147483648 limit
continuing other job steps, job failed will not be re-run
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current controlfile in backupset
channel ORA_DISK_1: starting piece 1 at 15-MAY-10
channel ORA_DISK_1: finished piece 1 at 15-MAY-10
piece handle=C:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ZUMA\BACKUPSET\2010_05
_15\O1_MF_NCNNF_TAG20100515T045136_5YX3TTFT_.BKP comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:17
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup plus archivelog command at 05/15/2010 05:11:21
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/15/2010 05:11:
03
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 52428800 bytes disk space from 2147483648 limit
RMAN>
Thanks & Regards,
Ranjith John

Provided you consult the 10g RMAN documentation and the online error documentation: yes.
But apparently you didn't check documentation, not even the error messages!!!!! Why?
You are backing up to the Flash Recovery Area, and the error messages mean too much space is occupied.
How to configure the Flash Recovery Areea is fully documented in the Backup and Recovery manual for 10g at http://tahiti.oracle.com
READ IT.
Please do not ask a volunteer to abstract it.
Sybrand Bakker
Senior Oracle DBA

BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'CA_BAB_MSSQL_e85860_10001_2085d987_ERP_DATABASE_ST_1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application reque

hello,
i getting the following error message in event id while backing up my SQL db by third party backing tool
BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'CA_BAB_MSSQL_e85860_10001_2085d987_ERP_DATABASE_ST_1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
<Data>995(The I/O operation has been aborted because of either a thread exit or an application request.)
please suggest the solution.

Hi pulkit,
According to your description, the actual error could be caused by but not limited to the following issues: Memory issues, Third Party issues, or SQL Server issues and so on. However, as shanky post, if you use an external or third party backup tool like
NetBackup, BackupExec, or one of the many other tools available for backing up SQL Server databases without having to write your own backup scripts, and the error occurs. You need to check if there are some issues about your VDI or SQLVDI.DLL. Meanwhile,
you also need to troubleshooting Memory Issue or the third tool issue. For more information about troubleshooting the error 995 when backing up database via the third party tool. You can review the following blog.
https://support.software.dell.com/kb/SOL14674
In addition, the error may include additional text from the operating system indicating that the disk is full. When performing a backup or restore operation with third-party backup software an additional message may occur indicating that the backup failed.
Perform the following tasks as appropriate:
1. Review the underlying system error messages and SQL Server error messages preceding this one to identify the cause of the failure.
2. Ensure that the backup and restore medium has sufficient space.
3. Correct any errors raised by third-party backup and restore software.
There is also detail about backing up database via T-SQL statement /GUI, you can review the following article.
http://technet.microsoft.com/en-us/library/ms187510.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Any solution for Windows 8.1 System Image Backup on DVD fails with error 0x80040154??(apart taking backup in external drive)

Windows 8.1 is facing a problem while taking System Image Backup on DVD, it pops an error saying 0x80040154 and more it says that class is not registered , i am trying from days to find some optimum solution for it apart from taking it on external
hard drive...any suggestion please let me know asap!
regards!

Hi,
Check this article first:
0x80040154 error may occur when you create a system image backup in Windows 8.1
http://support.microsoft.com/kb/2934165/en-us
Please capture the system event during you reproing this issue by using Process monitor:
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
If there is any Access denied error, follow this blog to solve this issue.
Solving Access Denied Errors Using Process Monitor
http://improve.dk/solving-access-denied-errors-using-process-monitor/
You can also upload the saved log file here for our research. Please upload them to a file sharing service like Skydrive or "Rapidshare" and put a link to them in your reply.
Kate Li
TechNet Community Support

What is the content of Windows 8 Backup media DVD?

Does anyone know what is on the Window 8 Backup media DVD provided by Microsoft?

Hi,
Seems that you've already created a installation media using the ISO for Windows 8, the media now has all necessary files to start Windows, you can start your PC from the DVD to repair the system.
According to your description, it also likes a power supply issue, so you can check your battery performance as well.
Yolanda Zhu
TechNet Community Support

Problem Restoring iTunes backup from DVD

I've searched and haven't seemed to find an answer to my particular issue, so if this has been asked and answered apologies. Here's my situation:
I am able to backup my entire library on my windows computer to move everything over to my imac. During the backup I didn't get any error messages. I restore the backup from DVD but for some reason one of the disks just will not restore and I have to keep skipping it. I can open it up and I see the files there, compilation folder with songe folders inside, some audio books, an album or two purchased from iTunes and a few albums from CDs that I actually own the physical media. I presume something is corrupted but don't know what.
My question is this: has anyone else experienced a similar situation and if so, were you able to get the disk to restore? If not, is there a way that I can select just the items from this bad disk to backup so that I don't have to do the entire back up again? As previously mentioned, I can browse the "bad" DVD and can see the items and folders? At the very least, I'd like to backup and restore the itunes purchased music and audio books and compilations; the other items I can just import from the cds that I own.
Thanks...I'm really getting frustrated after having tried this five or six times.

can somebody help i/m basically having the same problem but my error message says an unknown error occurred

How to backup my DVDs

Hi,
I just bought a DVD/CD read/write drive and my first DVD movies (LOTR trilogy) and I would like to set up my computer to burn backup copies of my DVD's. I am talking here about payed-for DVD's and personal backups so I guess legal questions are not raised.
I would like recomendations on console or gui tools/apps to use for backup-copying DVD's using the one combined DVD read/write drive that I have.
My thanks in advance.

sarah31 wrote:i had cheapo brand dvds-r 's and they sucked i had to use the prodvdrecord (or whatever) from the cdrtools web site. I now use slightly more expensive name brand dvds with no issue and I can use plain old growisofs without issue.
So far no luck :-( - seems to reject everything I tried for different reasons. Maybe the drive is to blame.
as for "backing up" encrypted dvds i don't know if you can do a straight disc to disc copy method. I suggest hitting google.com/linux for help.
Looks like it can be done (there is a dvdbackup tool for linux) but the drive will not burn dual layer disks. Guess I will have to buy one that does and perhaps solve the other problems as well ;-)
Thanks

Failure of backup command, please help

hi,
My last backup to give mi error :(
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 01/19/2010 07:31:50
ORA-19506: failed to create sequential file, name="software_inc0_T20100119_t708679906_s6348_p1", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
nwora_open_backup: unable to start save session with server
localhost: system error

user487449 wrote:
$ pwd
/d01/orabackup/oradata/mydb
$ ls -ltrc
total 2
2 drwxrwxrwx 2 orarman dba 2048 Aug 30 08:43 archThis shows permissions for arch directory inside mydb folder and you are creating files in mydb directory.
Do this:
$ cd /d01/orabackup/oradata/
$ ls -lartd mydbThis will show us the permissions set on mydb directory. You need to make sure that the OS user who is running RMAN script has write permissions on the mydb folder.
If you wish to grant 777 permissions on my db folder, do this:
chmod -R 0777 /d01/orabackup/oradata/mydb

Elements 10. Unable to backup to DVD

Trying to backup photos onto DVD but Elements does not see my DVD recorder, and will only backup to my hard drive (C) it does not even show any other destination.
Using Windows XP. trying to record to ASUS DVD recorder, did not have this problem Elements 6.

Reinstalled Elements and it now can now see all my drives.
Thanks for your help
Message Received: Feb 17 2012, 12:41 AM
From: "Brett N"
To: "PEROCC"
Cc:
Subject: Elements 10. Unable to backup to DVD
Re: Elements 10. Unable to backup to DVD created by Brett N in Photoshop Elements - View the full discussion
We need to check that the drive has been enabled to burn with Adobe software. Open the Registry Editor (regedit.exe) and navigate here:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E3 25-11CE-BFC1-08002BE10318}
Look for LowerFilters. Verify that it has PxHelp20 listed as a value. If it doesn't, you may need to reinstall Photoshop Elements. If it is there with something else, then the mostly likely cause of the issue is another software is conflicting with Elements. You may have to uninstall other disk burning software to allow Elements to work.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4212001#4212001
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4212001#4212001. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Source Media Backup to DVD (Disc Spanning) Options

I'm really unsure where this one goes:
I have about 150GB of source footage (P2HD) that I would like to backup to DVD and I'm looking for applications that will allow me to span a set of disks with this data (about 110 clips).
I looked into Toast 9 but it's a lot of useless software to buy for a single feature and their restrictive license is ridiculous.
Are there any alternatives? I guess I could use some command line tools like tar and cat to get what I need, but I was hoping for something simple.
We have a few copies of Disco App but the disc spanning seems broken on 10.5.5 (or the latest update - hard to tell which.)
Thanks for all your input!

HI Guys, just picked this up :
Additional information update on archive (backup) with Ultrium LTO4 SAS tape drives + HBA's and MACOSX archive/backup software.apps native on MAC OSX
loads and loads of detail and configs , OSx experiences (current) , prices, LTO4 ULTRIUM media + technical details & WTB.
Some threads very long but worth a read before plunging.
*WHAT ACTUALLY WORKS WELL!*
*MACPRO Ultrium LTO4 archive/backup solutions that works* (this is what I have working) is:
• HP LTO4 SAS desktop tape drives model HP 1840 (fullheight) or HP 1760 Half height
• ATTO TECH EXPRESSSAS PCIE HBA (HBAs and RAID HBA cards all work on OSX and supported by ATTO TECH for OSX
• TOLISGROUP's BRU-PE/LE natove OSx software - works like a charm and fully supported on OSX 10.5.6.
http://www.reduser.net/forum/showthread.php?t=21284
http://www.reduser.net/forum/showthread.php?t=24522
http://www.reduser.net/forum/showthread.php?t=17496
http://www.reduser.net/forum/showthread.php?t=7556 (very long and detailed thread)
http://www.reduser.net/forum/showthread.php?t=23545
http://www.dvxuser.com/V6/showthread.php?t=155693
http://www.dvxuser.com/V6/showthread.php?t=114778&page=2
*What to avoid:*
• QUANTUM Ultrium LTO4 SAS Desktop and LSI LOGIC's SAS3442E-R- both unsupported but will work on OSX. Again both unsupported on OSX.
• Quantum LTO3A (these are slow and expensive and have lots of non-things compared to LTO3 and LTO4. See the above links.
• SDLT600A and older DLT tape drives...
see the links
hth
w

[k9copy] Backup of DVD Progress Stuck

Source: DVD(-5) Movie
Backup: Rip and Encode to Defaults (avi)
During the rip:
*** libdvdread: CHECK_VALUE failed in /home/giovanni/Desktop/svn-packages/k9copy/trunk/src/k9copy-2.3.3-Source/src/dvdread/nav_read.c:207 ***
*** for dsi->dsi_gi.zero1 == 0 ***
I don't know who this giovanni is, so it's surprising why a program is referencing a path which doesn't exist. And also this comes up randomly:
DTS, flags=128"
"First video packet in sequence starting at 799004686 misses PTS or DTS, flags=128"
"First video packet in sequence starting at 799012878 misses PTS or DTS, flags=128"
(repeated a lot of times)
And then finally, at 76%:
QWaitCondition: cv destroy failure:
QWaitCondition: mutex destroy failure:
QThread: Destroyed while thread is still running
The app does not abort. Instead, the elapsed time keeps increasing. Without starting from terminal, there's no way to tell if anything's going on because CPU usage remains the same.
On another note, using acetoneiso2 happens to "complete" the rip (the errors are still there because it's from libdvdread), in that it successfully finishes the process. But, the final result is only half of the DVD, i.e faulty rip. DVD length is 58mins, but the file is 24 and stops abruptly.
It may be worth mentioning that the DVD appears to have two exact same tracks.

It's telling you that you need to make a table of contents (-t). Try this without the *.VOB:
dvdauthor -o /storage2/dvdcopy/ -T
--EDIT--
EEEEK! I told a lie. -t is the title, -T is the table of contents. The table of contents may have been created in the step you did before this. Take a look at the following page:
http://da.gentoo-wiki.com/HOWTO_Create_a_DVD:Filesystem
and for any other questions, check the links on the above's referring page:
http://da.gentoo-wiki.com/Index:HOWTO_Create_a_DVD
Last edited by skottish (2008-09-21 01:56:01)

Failure to backup while updating 3GS to iOS5 - now iTunes doesn't recognize iPhone!

Hi, I'm trying to update my 3GS to iOS5. Working on a brand-new Macbook Pro with Lion 10.7.2. Made sure I had the newest iTunes (10.5), synced my phone, transferre purchases to the computer, backed up manually for good measure. Downloaded the iOS5 update with no problem, and started the update process. Seemed to be going slowly but surely through the "backup" step of the update process. I left for five or ten minutes, and came back to a possible disaster:
- computer had gone to sleep (guess I could have changed preferences, but I assumed that the update-in-progress would keep the computer awake)
- iPhone screen shows the "plug USB into iTunes" graphic
- when I woke up the computer, it showed an error message - upgrade failed. I'm pasting the text from the iPhone Updater Log below... it ends with "Restore Error 2009."
- iPhone no longer shows up as a device in iTunes (or iPhoto). Tried closing and opening iTunes, disconnecting and reconnecting iPhone from USB port, and moving to second USB port. None of these worked. iPhone screen continues to display the "connect USB to iTunes" graphic. I found some relevant lines in the "all messages" log - pasting those below too.)
Anything I can do, short of bring both computer and phone to the Apple Store? (The phone is past warranty but I have AppleCare for the new computer)
Does the failure to back up mean that there is no previous backup I can get to? Any way to check if there's a working backup on the computer without it recognizing the iPhone?
All my apps, contacts, calendar items, music and photos are on my computer, so at least it seems that my data is not all lost. But the phone-to-computer connection doesn't seem to be coming back. Wonder if restarting computer could get it to recognize iPhone, but afraid of doing any more damage.
Any help appreciated! Thanks,
Adam
From "all messages" log:
10/16/11 6:54:58.000 PM kernel: USBF:          69557.492          [0xffffff8014034400] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfd100000)
10/16/11 6:55:03.000 PM kernel: USBF:          69563.461          AppleUSBEHCI[0xffffff8013f3d000]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 0, EP: 0)
10/16/11 6:55:09.000 PM kernel: USBF:          69569.465          AppleUSBEHCI[0xffffff8013f3d000]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 0, EP: 0)
10/16/11 6:55:10.000 PM kernel: USBF:          69569.498          [0xffffff8014034400] The IOUSBFamily gave up enumerating a USB device after 10 retries. (Port 2 of Hub at 0xfd100000)
10/16/11 6:55:10.000 PM kernel: USBF:          69569.498          [0xffffff8014034400] The IOUSBFamily was not able to enumerate a device.
iPhone Updater Log:
2011-10-16 18:42:14.000 iTunes[504:307]: restore library built Sep 2 2011 at 02:05:53
2011-10-16 18:42:14.000 iTunes[504:307]: iTunes: iTunes 10.5
2011-10-16 18:42:15.000 iTunes[504:307]: iTunes: Current software version: 8L1
2011-10-16 18:42:15.000 iTunes[504:307]: iTunes: Software payload version: 9A334
2011-10-16 18:42:47.000 iTunes[504:191bb]: iTunes: Specifying UOI boot image
2011-10-16 18:42:47.000 iTunes[504:191bb]: amai: AMAuthInstallSsoInitialize: can't find SSOClient.framework
2011-10-16 18:42:47.000 iTunes[504:191bb]: *** UUID F560FE18-6405-49CF-B4DD-6DA81E4D832C ***
2011-10-16 18:42:47.000 iTunes[504:191bb]: requested restore behavior: Erase
2011-10-16 18:42:47.000 iTunes[504:191bb]: amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/tmp/PersonalizedRestoreBundle.8R1bHYsrkB/amai/debug/tss-reques t.plist
2011-10-16 18:42:49.000 iTunes[504:191bb]: amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.0.0)
2011-10-16 18:42:49.000 iTunes[504:191bb]: amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/tmp/PersonalizedRestoreBundle.8R1bHYsrkB/amai/debug/tss-respon se.plist
2011-10-16 18:42:50.000 iTunes[504:191bb]: amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "KernelCache" has been previously personalized; skipping it
2011-10-16 18:42:50.000 iTunes[504:191bb]: amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "AppleLogo" has been previously personalized; skipping it
2011-10-16 18:42:50.000 iTunes[504:191bb]: amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "DeviceTree" has been previously personalized; skipping it
2011-10-16 18:42:50.000 iTunes[504:1c977]: iTunes: Entering recovery mode, device 0x7f931049acb0
2011-10-16 18:43:20.000 iTunes[504:11803]: received kAMDeviceDetached action, device 0x7f931049acb0
2011-10-16 18:43:28.000 iTunes[504:307]: device connected (isDFU = 0)
2011-10-16 18:43:28.000 iTunes[504:307]: device software does not support nonce generation
2011-10-16 18:43:28.000 iTunes[504:307]: device software does not support nonce generation
2011-10-16 18:43:28.000 iTunes[504:307]: iTunes: SCEP 4
2011-10-16 18:43:28.000 iTunes[504:12bd7]: iBoot build-version = iBoot-1072.61
2011-10-16 18:43:28.000 iTunes[504:12bd7]: iBoot build-style = RELEASE
2011-10-16 18:43:28.000 iTunes[504:12bd7]: DeviceRequest failed: 0xe000404f
2011-10-16 18:43:28.000 iTunes[504:12bd7]: command device request for 'getenv radio-error' failed: 2008
2011-10-16 18:43:28.000 iTunes[504:12bd7]: radio-error not set
2011-10-16 18:43:28.000 iTunes[504:12bd7]: <Recovery Mode Device 0x7f93123887b0>: operation 44 progress -1
2011-10-16 18:43:28.000 iTunes[504:12bd7]: requested restore behavior: Erase
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreLogo" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreDeviceTree" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreKernelCache" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreRamDisk" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "KernelCache" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "AppleLogo" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "BatteryCharging1" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "BatteryFull" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "BatteryPlugin" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "BatteryCharging0" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "BatteryLow0" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "BatteryLow1" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "BatteryCharging" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RecoveryMode" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "DeviceTree" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBoot" has been previously personalized; skipping it
2011-10-16 18:43:28.000 iTunes[504:12bd7]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
2011-10-16 18:43:28.000 iTunes[504:12bd7]: unable to open device_map.txt: No such file or directory
2011-10-16 18:43:28.000 iTunes[504:12bd7]: <Recovery Mode Device 0x7f93123887b0>: production fused device
2011-10-16 18:43:28.000 iTunes[504:12bd7]: <Recovery Mode Device 0x7f93123887b0>: operation 4 progress -1
2011-10-16 18:43:34.000 iTunes[504:12bd7]: DeviceRequest failed: 0xe0004051
2011-10-16 18:43:34.000 iTunes[504:12bd7]: unhandled error 0xe0004051 returned as 2009
2011-10-16 18:43:34.000 iTunes[504:12bd7]: command device request for 'setenv auto-boot false' failed: 2009
2011-10-16 18:43:34.000 iTunes[504:12bd7]: AMRAuthInstallDeletePersonalizedBundle
2011-10-16 18:43:34.000 iTunes[504:12bd7]: <Recovery Mode Device 0x7f93123887b0>: Recovery mode failed (result = 2009)
2011-10-16 18:43:34.000 iTunes[504:1c977]: iTunes: Restore error 2009

Here are Apple Steps:
http://www.apple.com/support/iphone/assistant/itunes/

Install failure due to "faulty DVD" problem: only with Family Pack?

After going through a few threads on the subject of installation failure due to tbe pseudo-faulty DVD, I have the impression that many users mention that they were using a Family Pack install DVD or in one case a "drop in". The former is my case. Please post if you have had this problem with Leopard install, and whether you were using a single licence, family pack or drop in. It's just a hunch, but perhaps this problem only affects a specific set of disks.

I believe that they are holding back on sending a new DVD until they know why there were defective ones. I read somewhere that they require a new SKU so that they will actually be a separate batch.
Can you borrow a DVD from anyone to install Leopard? You certainly would be allowed to legally do that. I am surmising that Apple is overloaded with requests for a replacement DVD and really want to make sure it works. You know that old thing about "fool me once..."
Stuff happens - but with Leopard, a lot of stuff sure happened at once. They sold 2 million DVDs. If only 5% have problems, that's a lot of problems to deal with, one at a time.
In time it will sort itself out, but in the meantime the rooms are full of smoke

Error during backup to DVD: Unknown Error when burning to disc (261)

I'm writing on behalf of my brother who has an HP Pavilion ZE2120CA laptop and is using the latest version of iTunes. We were backing up his purchased music onto DVD but just after it says "Burning Disc Initialized" the disc ejects from the drive and it says this cryptic error message. We also tried connecting an external Plextor drive via USB2 - same thing. Any suggestions, white papers or documents out there that'll help us? Also feel free to talk technical to us because I am A+ Certified and while my brother is an English major he also has an intimate knowledge of computers and has several programming courses under his belt.
Thanks,
Steve and Dan LeDuke
Waterloo, ON Canada

Look at some of the other topics. Many of them deal with backup problems since the release of version 7.3. Quite a few of them deal with your situation.

Failure to backup to dvd in PhotoElements 9

Similar Messages

Maybe you are looking for