Failure to connect - host not responding

I've been video conferencing regularly with my mother in Fla with no problems. We both have macs with mac accounts. I recently tried to initiate a video conference with my in-laws in N.C. and it wouldnt work. They have a PC with an AIM account. Thier AV icon appears active on my buddy list. I can invite them to a video conference, they see the invite and accept, I can see they've accepted but then the connection fails saying that I (the host) did not respond???? How can that be, since I invited them. By the way, this is the same error I get when I try contacting another friend with a PC and AIM account. Any suggestions? Your assistance would be deeply appreciated.
...by the way, I'm in China but as I said this hasnt effected my ability to video conference with FLA.
Thanks again -al

HI Al,
Welcome to the Apple Discussion Pages.
The minimum connection speed needed by iChat to chat to other iChat users is now listed as 100kbps
In iChat 2 this figure was the realistic figure for Video chats.
It was known however that iChat to PC chats did better if the connection speed was at least 150kbps (at both ends)
What do you have ?
http://www.adslguide.org.uk/tools/speedtest.asp Test here.
Ralph

Similar Messages

TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding

TACACS+ configured on router and router is in ACS. I can ping the ACS but the router cannot establish a connection to authenticate users.
aaa group server tacacs+ hq_acs-1
server 10.20.17.2
ip tacacs source-interface GigabitEthernet0/0
aaa authentication login default group tacacs+ local
aaa authorization config-commands
aaa authorization exec default group tacacs+ local
aaa authorization commands 10 default group tacacs+ local
aaa authorization commands 15 default group tacacs+ local
aaa accounting nested
aaa accounting update newinfo periodic 60
aaa accounting auth-proxy default start-stop group tacacs+
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting network default start-stop group tacacs+
aaa accounting connection default start-stop group tacacs+
aaa accounting system default start-stop group tacacs+
aaa accounting resource default start-stop group tacacs+
BigTree_3945#sh ip int br
Interface                  IP-Address      OK? Method Status                Protocol
GigabitEthernet0/0         10.4.3.1        YES NVRAM down                  down
GigabitEthernet0/1         10.12.10.26     YES NVRAM up                    up
Serial0/2/0                unassigned      YES NVRAM down                  down
Serial0/2/0.602            10.12.15.10     YES NVRAM down                  down
Apr 13 11:08:13.673: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:13.673: TPLUS: processing authentication start request id 79
Apr 13 11:08:13.675: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:13.675: TPLUS: Using server 10.20.17.2
Apr 13 11:08:13.675: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:18.676: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:25.834: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:25.834: TPLUS: processing authentication start request id 79
Apr 13 11:08:25.834: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:25.834: TPLUS: Using server 10.20.17.2
Apr 13 11:08:25.834: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:30.836: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:43.689: TAC: Using default tacacs server-group "tacacs" list.
Apr 13 11:08:43.689: TAC+: Opening TCP/IP to 10.20.17.2/49 timeout=5
Apr 13 11:08:51.057: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:51.057: TPLUS: processing authentication start request id 79
Apr 13 11:08:51.057: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:51.057: TPLUS: Using server 10.20.17.2
Apr 13 11:08:51.057: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:54.692: TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding
Apr 13 11:08:54.692: TPLUS: Queuing AAA Accounting request 76 for processing
Apr 13 11:08:54.692: TPLUS: processing accounting request id 76
Apr 13 11:08:54.692: TPLUS: Sending AV task_id=332
Apr 13 11:08:54.692: TPLUS: Sending AV timezone=EDT
Apr 13 11:08:54.692: TPLUS: Sending AV service=shell
Apr 13 11:08:54.692: TPLUS: Sending AV start_time=1334329734
Apr 13 11:08:54.692: TPLUS: Sending AV priv-lvl=15
Apr 13 11:08:54.692: TPLUS: Sending AV cmd=show logging <cr>
Apr 13 11:08:54.692: TPLUS: Accounting request created for 76(n20j03t)
Apr 13 11:08:54.692: TPLUS: Using server 10.20.17.2
Apr 13 11:08:54.692: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: Started 5 sec timeout
Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:56.058: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out
Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out, clean up
Apr 13 11:08:59.693: TPLUS(0000004C)/1/20FD90EC: Processing the reply packet
BigTree_3945#
AAA Client IP Address
10.4.3.* 10.12.15.10
Key
Network Device Group
Test
NJT
AccessLink
(Not Assigned)
Authenticate Using
TACACS+ (Cisco IOS)
RADIUS (Cisco Aironet)
RADIUS (Cisco BBSM)
RADIUS (Cisco IOS/PIX)
RADIUS (Cisco VPN 3000)
RADIUS (Cisco VPN 5000)
RADIUS (IETF)
RADIUS (Ascend)
RADIUS (Juniper)
RADIUS (Nortel)
RADIUS (iPass)
Single Connect TACACS+ AAA Client (Record stop in accounting on failure).
The 10.12.10.* range is listed under the HQ site.
Your help is greatly appreciated.

You stated that you can ping ACS from the router, did you try sourcing the packets from the GigabitEthernet 0/0 interface (which is the one TACACS+ will try to use, given the configuration that you posted)?
What does the network path between the router and ACS look like (ie, any firewalls, NAT, etc)?
Can you connect to port 49 at the ACS IP address from the router sourcing the packets from GigabitEthernet 0/0 ?
Are you using VRFs?
What version of IOS?

Connection Status: not Responding SCVMM '08

I just installed SCVMM 2008 on a Windows 2008 x64 server with Hyper-V RC0 Enabled. From the console on the server it says "Needs Attention" and when I double click on it, it says
Connection Status: Not Responding
Agent Version: Up to Date
Virtualization Status: Unknown
Virtualization Service Version: Up-to-Date
The firewall is turned on for public network only, and I can connect to manage that box with the hyper-v mmc snap-in for Vista. Why is SCVMM not connecting to it? I rebooted the server after install and still can't get it to work correctly. It sees my VMs on the server but I can't connect to them either.
Thanks,
Chris

I'm having very similar erros, I have read all posted blogs in this thread and followed all instructions with no luck.
This is what Im getting;
Error (2912)
An internal error has occurred trying to contact an agent on the virtualqa1.PFDOMAIN.prairiefyre.com server.
(Unknown error (0xc0000bbf))
Recommended Action
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
Connection Status: Not Responding
Agent Status: Responding
Agent Version: Up-to-Date
Virtualization service status: Running
Virtualization service version: Up-to-Date
I have already applied KB956589 and KB956774.
I did have a USB External Drive connected to the Host, which I have disconnected and have rebooted the host afterwards.
I have installed SCVMM 2008 RTM Server on my Host machine, which is the Hyper-V server.
I have also setup the SCVMM tracing according to the post in this thread. Here is what I see:
00027454 561.69750977 [2788] Ensure that the agent is installed and running. If the error persists, reboot virtualqa1.PFDOMAIN.prairiefyre.com and then try the operation again. ---> System.Runtime.InteropServices.COMException (0x80338000): The WS-Management service cannot process the request. The service cannot find the resource identified by the resource URI and selectors.
00027455 561.69750977 [2788]    at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Get(Object resourceUri, Int32 flags)
00027456 561.69750977 [2788]    at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(MyWSManResourceLocator resLocator, Type type)
00027457 561.69750977 [2788]    --- End of inner exception stack trace ---
00027458 561.69750977 [2788]    at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(COMException ce)
00027459 561.69750977 [2788]    at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
00027460 561.69750977 [2788]    at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(MyWSManResourceLocator resLocator, Type type)
00027461 561.69750977 [2788]    at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(String url, Type type)
00027462 561.69750977 [2788]    at Microsoft.Carmine.WSManWrappers.WSManRequest`1.Get(String url)
00027463 561.69750977 [2788]    at Microsoft.Carmine.WSManWrappers.VirWSManRequest`1.Get(String url)
00027464 561.69750977 [2788]    at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.GetSettings(WsmanAPIWrapper wrapper, String instanceID)
00027465 561.69750977 [2788]    at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.get_ViridianVSSD()
00027466 561.69750977 [2788]    at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.get_IsSnapshot()
00027467 561.69750977 [2788]    at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.GetTimeOfLAstConfigurationChange(IVMComputerSystem vmComputer)
00027468 561.69750977 [2788]    at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.IsHeavyRefresherNeeded(IVMComputerSystem vmComputer, Nullable`1& modTime)
00027469 561.69750977 [2788]    at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateFullVMObjectToCarmine(IVMComputerSystem vmComputer, VMData vmData, UpdateRequired updateRequired, Boolean vmObjectHasChanged)
00027470 561.69750977 [2788] *** Carmine error was: HostAgentWSManObjectNotFound (2915); HR: 0x80338000
00027471 561.69750977 [2788] *** virtualqa1.PFDOMAIN.prairiefyre.com ** D:\Virtual VMC\MCC Server\2003 Server x86.vhd **
00027472 561.69763184 [2788] 0AE4.08A0::11/07-16:26:07.441#26:VmRefresher.cs(727): Caught an exception while refreshing VM 5.5 Server : a7760db6-c5c9-401e-add7-fd1c8c2fecd5. Refresher ID a4d42b32-55e5-49ff-a99d-28342a0d7008
00027473 561.69818115 [2788] 0AE4.08A0::11/07-16:26:07.441#26:VmRefresher.cs(727): Microsoft.Carmine.WSManWrappers.WSManProviderException: The WS-Management service cannot process the request. Object not found on the virtualqa1.PFDOMAIN.prairiefyre.com server.
00027474 561.69818115 [2788] Ensure that the agent is installed and running. If the error persists, reboot virtualqa1.PFDOMAIN.prairiefyre.com and then try the operation again. ---> System.Runtime.InteropServices.COMException (0x80338000): The WS-Management service cannot process the request. The service cannot find the resource identified by the resource URI and selectors.
00027475 561.69818115 [2788]    at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Get(Object resourceUri, Int32 flags)
00027476 561.69818115 [2788]    at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(MyWSManResourceLocator resLocator, Type type)
00027477 561.69818115 [2788]    --- End of inner exception stack trace ---
00027478 561.69818115 [2788]    at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(COMException ce)
00027479 561.69818115 [2788]    at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
00027480 561.69818115 [2788]    at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(MyWSManResourceLocator resLocator, Type type)
00027481 561.69818115 [2788]    at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(String url, Type type)
00027482 561.69818115 [2788]    at Microsoft.Carmine.WSManWrappers.WSManRequest`1.Get(String url)
00027483 561.69818115 [2788]    at Microsoft.Carmine.WSManWrappers.VirWSManRequest`1.Get(String url)
00027484 561.69818115 [2788]    at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.GetSettings(WsmanAPIWrapper wrapper, String instanceID)
00027485 561.69818115 [2788]    at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.get_ViridianVSSD()
00027486 561.69818115 [2788]    at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.get_IsSnapshot()
00027487 561.69818115 [2788]    at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.GetTimeOfLAstConfigurationChange(IVMComputerSystem vmComputer)
00027488 561.69818115 [2788]    at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.IsHeavyRefresherNeeded(IVMComputerSystem vmComputer, Nullable`1& modTime)
00027489 561.69818115 [2788]    at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateFullVMObjectToCarmine(IVMComputerSystem vmComputer, VMData vmData, UpdateRequired updateRequired, Boolean vmObjectHasChanged)
00027490 561.69818115 [2788]    at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.RunFullRefresher()
00027491 561.69818115 [2788] *** Carmine error was: HostAgentWSManObjectNotFound (2915); HR: 0x80338000
00027492 561.69818115 [2788] *** virtualqa1.PFDOMAIN.prairiefyre.com ** D:\Virtual VMC\MCC Server\2003 Server x86.vhd **

Host Not Responding and Needs Assistance

I have a VMM 2012 R2 Cluster based on two nodes. Both nodes have similar hardware configuration. When I move the VMM Cluster to Node 2, I face an issue of
Host Not Responding and Needs Assistance on almost all Hyper-V Host Servers. But, When I move the Cluster to Node 1 off VMM, everything starts working and works undisturbed for days. What could be different
between two hosts that can cause such a behavior that causes connection loss and thus the above error in the console. How can I identify what is different in the first node from second node?

hi ATR,
Thanks for your prompt reply:
1 b. after you are in the workspace and are importing/editing/exporting? During Editing and add pictures and gopro files to the time line
2
1. Are you running the program as Administrator with an Internet connection?
No not running in admin mode.
Wifi connection is on
Do you have the latest version of QuickTime
Nieuw in QuickTime 7.7.6
installed on your computer along with Premiere Elements 11? yes
computer see attachment
2. Does the problem exist with or without the antivirus and firewall(s) disabled?
not tried yet , now avg 2015 virus scanner is on
3. Are you working with pen and tablet device instead of mouse?
No only laptop elan smart pad , on laptop.
4. Is your video card/graphics card up to date according to the web site of the manufacturer of the card? How many
video cards/graphics cards does you computer use?
yes up to date only 1 card
5. Please describe your computer resources - processor, clock speed, installed RAM, available hard drive space?
Is the program installed to the default Local Disk C?
Installed on local disk drive C
See attachment for details

TS1398 I have I-phone 4S - Since updating to IOS 6, when at home with Wi-Fi network with my I Phone connection is not responding sometimes – for example if I want to check my G-mail it shows loading but nothing happens and after few minutes it displays "C

I have I-phone 4S - Since updating to IOS 6, when at home with Wi-Fi network with my I Phone connection is not responding sometimes – for example if I want to check my G-mail it shows loading but nothing happens and after few minutes it displays “Cannot Get Mail” – The mail server “imap.gmail.com is not responding, Verify that you have entered the correct account info in mail settings
Other times the Wi-Fi connection works fine and it check e-mail or other within few seconds. The connection problems seems to be intermitted
This issue never happened before with IOS 5 since I bought the new phone in Oct 2011.

We suffered the imap.gmail.com server problem After an IoS 6 upgrade. The simple solution is to delete the problem account, shut down the iPad, start up again and reenter the account. Everything comes back normally. Good Luck everyone!

Unable to connect, server not responding

Hello,
We've resurrected a machine running 10.4.x from the dead back into use but it isn't happy with our network. It is configured correctly as far as I can tell. It responds to pings, can browse websites, and can mount other drives; however, when I try to mount the 10.4.x machine's drive from another machine I get the following:
"Unable to connect - server not responding." Which I know is completely untrue after testing ping.
I only entered the ip address in the Go > Connect to Server dialog. When attempting to connect from another machine I see a little more output:
"The finder cannot complete the operation because some data in "afp://10.0.1.7" could not be read or written. (Error code -36)"
I am lost here, any help or observations are highly appreciated.

Hi kssi89, and a warm welcome to the forums!
Well, in pure Apple File System talk... -36 ioErr I/O error (bummers)
Not very helpful, but generally means a Drive quit being Readable or Writable since starting the operation...
http://fuzzy.wordpress.com/2006/12/10/ioerror-36/
But, in this instance I think it's not even starting to.
Assuming Personal File Sharing is on on that machine & Internet Sharing is OFF, I might try trashing these, reboot and set it up again...
/Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
/Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/com.apple.sharing.firewall.plist

XA resource [weblogic.jdbc.jts.Connection] has not responded in the last 120 second(s).

I frequently encounter this problem: The application calls long-lasting stored
procedure on Sybase which located in another country. Sometimes, WL 6.1 get stuck
just and log the message "XA resource [weblogic.jdbc.jts.Connection] has not responded
in the last 120 second(s)."
Questions:
Does increasing thread count help? Default is 15. Is 30 or larger OK?
Can anybody share their experience on this matter?
Detailed log messages in weblogic.log are follows:
####<Apr 21, 2003 5:03:48 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
<Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
responded in the last 120 second(s).>
####<Apr 21, 2003 5:33:51 PM GMT+08:00> <Info> <JTA> <hkxp0032> <myserver> <Thread-0>
<> <> <110207> <Previously unavailable XA resource [weblogic.jdbc.jts.Connection]
is now available.>
####<Apr 21, 2003 5:33:56 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
<Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
responded in the last 120 second(s).>

Andrew Ng wrote:
I frequently encounter this problem: The application calls long-lasting stored
procedure on Sybase which located in another country. Sometimes, WL 6.1 get stuck
just and log the message "XA resource [weblogic.jdbc.jts.Connection] has not responded
in the last 120 second(s)."
Questions:
Does increasing thread count help? Default is 15. Is 30 or larger OK?Increasing thread count isn't going to help. The local server is just waiting for the
remote system to respond.
>
Can anybody share their experience on this matter?
Detailed log messages in weblogic.log are follows:
####<Apr 21, 2003 5:03:48 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
<Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
responded in the last 120 second(s).>
####<Apr 21, 2003 5:33:51 PM GMT+08:00> <Info> <JTA> <hkxp0032> <myserver> <Thread-0>
<> <> <110207> <Previously unavailable XA resource [weblogic.jdbc.jts.Connection]
is now available.>
####<Apr 21, 2003 5:33:56 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
<Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
responded in the last 120 second(s).>

Host Not Responding

A number of our standalone VM host servers have encountered this problem following an upgrade from SCVMM 2008 to 2012.
Not all of the servers have this issue (our server clusters for example are working fine.) We have been trying to find a working solution for this for awhile now without success. Deleting and re-adding the host servers in VMM has not worked either.
We have followed the instructions in the error that is presented (and that I have attached as a screenshot) but this has not helped either.
Any help that could be provided would be greatly appreciated.

Hello Wytecastl,
Can you follow the instructions on the following link about your issue?
http://blogs.technet.com/b/jonjor/archive/2008/12/29/how-to-troubleshoot-slow-bits-performance-hosts-not-responding-and-needs-attention-communication-issues.aspx
That should solve your problem or identify problem.
Sincerely,
Murat Demirkiran
If the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. www.scvmm2012.com (TR Language) Please note that I'm not a Microsoft Representative
or SpokesPerson.

Host not responding ESXi 5.5 and HA messages

hi guys
Lately I've been troubleshooting an issue with ping lost for my ESXi Servers. Network people tested all and they say is not networking.
These two servers are in a blade center - ibm - and they HS23, having Emulex and Broadcom NICs (Emulex OneConnect 10Gb NIC (be3), Broadcom NetXtreme II BCM5709S 1000Base-SX). Servers firmware is up to date and NICs and driver for NICs were updated yesterday and the issue is the same... continue ping lost
and today and I found repetitive "host not responding messages" like every 2 - 3 hours
and a lot of these too HA related as you can see below?
Any idea what logs do I have to check? for the ping lost and HA issue?
thanks a lot

Note: Discussion successfully moved from VMware ESXi 5 to Availability: HA & FT

Get messagewhen syncing iphone no longer connected or not responding

I have tried to transfer ringtones from my computer or memory stick to my iphone. These ringtones were previously on this phone but are gone. Each time I try to sync them again, I get the message "your iphone is no longer connected or is not responding". It is physiaclly connected so I'm losing connection internally.How do I fix this problem?

If you are using a USB hub for the iPhone, don't. If you are using a front port on a desktop or tower computer, don't.

N97 - Settings 'Connectivity' do not respond

Hello,
I am having an issue with N97 'connectivity' settings. If I go to connectivity though settings and exit,Settings do not respond until I restart my phone.Does anyone know how can I get rid of this Problem?
after i exit from settings, it still shows 'Settings' application as running but it never responds.
plaese help me.
Regards,
Murrac.

Hi, when did this start to happen? After installing anything specific to it - 3rd party apps, themes, settings etc?

WIndows 8.1 Direct Access Client Needs to approve external wifi use before it connects - proxy not responding

Ok So I have windows 8.1 with Direct Access Client and it works fine when I am able to check and uncheck proxy settings - which is a bit of a pain and seems unnecessary (I hope). If I take the laptop to a Starbucks I get the error that the proxy server is
not responding so it never redirects for me to "accept" the rules.
If I uncheck my proxy settings it then redirects and connects to their internet wifi and off I go - DA connects and all is well.
I am using a GPO to configure the proxy settings as shown (all options are greyed out for the users)

Hi,
Your problem is a classic one when using that kind of proxy settings, unfortunately.
To solve this without the need of user interaction, there are two solutions that will sort this out for you. In your case, if you want to use your corporate connection for internet traffic even over da, I'd opt for alternative 1 or 2 depending on what you are
trying to achieve.
1. WPAD (Web Proxy Auto Discovery protocol http://en.wikipedia.org/wiki/Web_Proxy_Autodiscovery_Protocol) - it actually uses the Automatic browser configuration checkbox on your client and looks for the file wpad.dat on a specific web server that you Pointout
with either dns-record called wpad or DHCP option 252.
2. Auto configuration script (pac script http://en.wikipedia.org/wiki/Proxy_auto-config) - uses the same kind of file as above. The difference is that you get the possiblity, like you want in your scenario to target what users that should get the script.
See this below article for more details on the options you have.
http://technet.microsoft.com/en-us/library/dd361918.aspx
http://techlib.barracuda.com/display/WSFLEXv41/How+to+Configure+Proxy+Settings+Using+Group+Policy+Management
Let us know if you need further assistance!
/Johan
MCT | MCSE: Private Cloud/Server, Desktop Infrastructure

Error: RFC connection host not found

Dear all,
I have configured the SLD and JCO destinations also. But when i test connection system throws the error.
<b>com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=thr3dev1 GROUP=PUBLIC R3NAME=DEV MSSERV=sapmsDEV PCS=1 ERROR service 'sapmsDEV' unknown TIME Tue Oct 11 19:03:14 2005 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -3 MODULE ninti.c LINE 494 DETAIL NiPGetServByName2: service 'sapmsDEV' not found SYSTEM CALL getservbyname_r COUNTER 1</b>
Pls suggest something. Can anybody provide the step check list.
Regds,
Anup

Anup,
the entry sapmsDEV is missing in your "services"-file on the computer that hosts your SLD-Server/J2EE WAS. Windows locates it at %WINDIR%/system32/drivers/etc, unix usually at /etc/.
make an entry like that:
sapmsDEV 3600/tcp (in case, your Systemnumber is 00, otherwise replace the "00" with your actual systemnumber)
kind rtegards, achim

SSH - Failure to connect, does not prompt for password,

I have been using SSH on this iMac with 10.5.4 for over a year, upgraded to Leopard when it came out, never a problem with SSH, but now for no apparent reason, SSH fails when trying to connect through VPN into work.
I can still connect to other systems on the internet that are not through the VPN.
I don't suspect this to be a VPN issue because no other employees are having this problem with the VPN, using Mac, Windows or Linux. I can connect vi putty on my windows from the same network... below is my config.
Here is what I'm getting:
I connect as- ssh me@hostname and it returns "Permission denied (publickey)." It makes to attempt to prompt me for a password. I do not use a key on this system so it should prompt me for a password. I changed nothing on the system to cause ssh to break, But it's possible that a apple security update caused something to break.
I have added the following to my ~/.ssh/config file
PasswordAuthentication yes
My /etc/ssh_config file is as follows:
cat /etc/ssh_config
# $OpenBSD: ssh_config,v 1.22 2006/05/29 12:56:33 dtucker Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.
# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.
# Site-wide defaults for some commonly used options. For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.
# Host *
# ForwardAgent no
# ForwardX11 no
# RhostsRSAAuthentication no
# RSAAuthentication yes
PasswordAuthentication yes
# HostbasedAuthentication no
# GSSAPIAuthentication no
# GSSAPIDelegateCredentials no
# GSSAPIKeyExchange no
# GSSAPITrustDNS no
# BatchMode no
# CheckHostIP yes
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# Port 22
# Protocol 2,1
# Cipher 3des
# Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
# EscapeChar ~
# Tunnel no
# TunnelDevice any:any
PermitLocalCommand yes
My /etc/sshd_config is:
cat /etc/sshd_config
# $OpenBSD: sshd_config,v 1.72 2005/07/25 11:59:40 markus Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options change a
# default value.
#Port 22
#Protocol 2,1
Protocol 2
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# HostKey for protocol version 1
#HostKey /etc/sshhostkey
# HostKeys for protocol version 2
#HostKey /etc/sshhost_rsakey
#HostKey /etc/sshhost_dsakey
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 768
# Logging
# obsoletes QuietMode and FascistLogging
SyslogFacility AUTHPRIV
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
#PermitRootLogin yes
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile .ssh/authorized_keys
# For this to work you will also need host keys in /etc/sshknownhosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
# SACL options
#SACLSupport yes
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange yes
# GSSAPI options
#GSSAPIAuthentication yes
#GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication mechanism.
# Depending on your PAM configuration, this may bypass the setting of
# PasswordAuthentication, PermitEmptyPasswords, and
# "PermitRootLogin without-password". If you just want the PAM account and
# session checks to run without PAM authentication, then enable this but set
# ChallengeResponseAuthentication=no
#UsePAM yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no
# no default banner path
#Banner /some/path
# override default of no subsystems
Subsystem sftp /usr/libexec/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# ForceCommand cvs server

Also I forgot to mention, I have nulled out the known_hosts file to eliminate any conflicts there, I have verified .ssh is 700 and files config and known_hosts are 600
output using ssh -v
debug1: Reading configuration data /Users/<me>/.ssh/config
debug1: Reading configuration data /etc/ssh_config
debug1: Connecting to pshx4105a [216.255.177.213] port 22.
debug1: Connection established.
debug1: identity file /Users/<me>/.ssh/identity type -1
debug1: identity file /Users/<me>/.ssh/id_rsa type -1
debug1: identity file /Users/<me>/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.5p1 FreeBSD-20061110
debug1: match: OpenSSH_4.5p1 FreeBSD-20061110 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.7
debug1: SSH2MSGKEXINIT sent
debug1: SSH2MSGKEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2MSG_KEX_DH_GEXREQUEST(1024<1024<8192) sent
debug1: expecting SSH2MSG_KEX_DH_GEXGROUP
debug1: SSH2MSG_KEX_DH_GEXINIT sent
debug1: expecting SSH2MSG_KEX_DH_GEXREPLY
debug1: Host 'pshx4105a' is known and matches the DSA host key.
debug1: Found key in /Users/<me>/.ssh/known_hosts:3
debug1: sshdssverify: signature correct
debug1: SSH2MSGNEWKEYS sent
debug1: expecting SSH2MSGNEWKEYS
debug1: SSH2MSGNEWKEYS received
debug1: SSH2MSG_SERVICEREQUEST sent
debug1: SSH2MSG_SERVICEACCEPT received
debug1: Authentications that can continue: publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /Users/<me>/.ssh/identity
debug1: Trying private key: /Users/<me>/.ssh/id_rsa
debug1: Trying private key: /Users/<me>/.ssh/id_dsa
debug1: No more authentication methods to try.

WRT610N Loses Internet connection, does not respond - with HP Mediasmart HomeServer plugged in

OK - this makes no sense to me - and I consider myself somewhat technical.   Hopefully it will make sense to someone else.
I have a new WRT610N v2 (2.00.00.B05) with 3-6 computers (Vista, W7) attached wired and wireless to them at any point in time. I also have an HP Mediasmart EX470 (Windows Homeserver) attached to the network to back them all up. Everything worked great with a WRT54G - but I wanted Gigabit.
Every moring since I got the router, I found it completely unresponsive - all lights on, all systems with IP addresses, etc. - but the router was not communicating with the Internet - and it would not connect newly booted computers, etc.
This happened with my original v1 - so I had it replaced - and I replaced my cable modem as well. I now have an Ambit uc1018.80.
Rather than pushing the reset button today and going through the reconfig process; I tried unplugging network cables to see if it would have an effect.  I unplugged the homeserver - and my cable modem "send" light flashed - I was connected (I could browse, etc.) I plugged it back in - and everything went dead - no more send light on the cable modem - and no more internal network traffic either.
I rebooted the homeserver - and everything now works - until, I expect, the next night. The homeserver is a HP EX470 Mediasmart with a memory upgrade (2gb) and a processor upgrade (AMD 1640). It is running Windows Home Server Powerpack 3 (HP Update 1.2.1) with the following addons (PacketVideo PVConnect 4.4.4, Microsoft Homeserver Toolkit 1.1 (6.0.1800.0); and McAfee Total protection 5.0.0.648-patch003). I do not have remote access settings configured.
The homeserver is configured to backup all computers on the network overnight - most of the time they complete successfully - last night one of them failed.
The homeserver has a SiS191 1000/100/10 adapert running at 1000 (DHCP) driver version 2.0.1039.1070 dated 12/20/2006. I am going to look for a newer driver - but it does not make sense that one computer can render a router unresponsive - does it? Any ideas?
Thanks....

Here's an update - it looks like it might have somewith to do with DHCP and IPv6....
Testing steps taken - notice that changes in ipconfig/all output is IPv6 related...
1. Router set to factory defaults and re-configured.
2. All systems rebooted and connected to router.
3. All works well for several hours.
4. Cable Modem send light goes out - all network access from client computers ceases.
5. WHS cable disconnected from router - all client network traffic starts working and continue to work for several days without WHS connected.
6. IPconfig of Vista SP2 client computer taken:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Computer
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : roc.mn.charter.com
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : roc.mn.charter.com
   Description . . . . . . . . . . . : Intel(R) 82566DC-2 Gigabit Network Connection
   Physical Address. . . . . . . . . : 00-1E-8C-2B-1B-8D
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2002:4b86:9d9a:0:7535:633a:5ca9:b7be(Preferred) ******
   Temporary IPv6 Address. . . . . . : 2002:4b86:9d9a:0:740d:b08d:72f5:a267(Preferred) ******
   Link-local IPv6 Address . . . . . : fe80::7535:633a:5ca9:b7be%10(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.225(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.224
   Lease Obtained. . . . . . . . . . : Sunday, December 27, 2009 10:29:48 AM
   Lease Expires . . . . . . . . . . : Tuesday, December 29, 2009 10:29:46 PM
   Default Gateway . . . . . . . . . : fe80::225:9cff:febe:e726%10
                                       192.168.1.254
   DHCP Server . . . . . . . . . . . : 192.168.1.254
   DHCPv6 IAID . . . . . . . . . . . : 251666060
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-10-F7-21-EE-00-1E-8C-2B-1B-8D
   DNS Servers . . . . . . . . . . . : 192.168.1.254
                                       24.159.193.40
                                       68.115.71.53
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 6:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : roc.mn.charter.com
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 7:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 02-00-54-55-4E-01
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e50:10eb:520:3f57:fe1e(Preferred)
   Link-local IPv6 Address . . . . . : fe80::10eb:520:3f57:fe1e%11(Preferred)
   Default Gateway . . . . . . . . . :
   NetBIOS over Tcpip. . . . . . . . : Disabled
7. WHS server cable plugged into router - send light on cable modem goes out - all connectivity ceases - client ipconfig taken (IPv6 Deprecated?)
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Computer
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : roc.mn.charter.com
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : roc.mn.charter.com
   Description . . . . . . . . . . . : Intel(R) 82566DC-2 Gigabit Network Connection
   Physical Address. . . . . . . . . : 00-1E-8C-2B-1B-8D
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Temporary IPv6 Address. . . . . . : 2002:4b86:9d9a:0:740d:b08d:72f5:a267(Deprecated) ******
   IPv6 Address. . . . . . . . . . . : 2002:4b86:9d9a:0:7535:633a:5ca9:b7be(Deprecated) ******
   Link-local IPv6 Address . . . . . : fe80::7535:633a:5ca9:b7be%10(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.225(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.224
   Lease Obtained. . . . . . . . . . : Sunday, December 27, 2009 10:29:48 AM
   Lease Expires . . . . . . . . . . : Tuesday, December 29, 2009 10:29:46 PM
   Default Gateway . . . . . . . . . : fe80::225:9cff:febe:e726%10
                                       192.168.1.254
   DHCP Server . . . . . . . . . . . : 192.168.1.254
   DHCPv6 IAID . . . . . . . . . . . : 251666060
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-10-F7-21-EE-00-1E-8C-2B-1B-8D
   DNS Servers . . . . . . . . . . . : 192.168.1.254
                                       24.159.193.40
                                       68.115.71.53
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 6:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : roc.mn.charter.com
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 7:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 02-00-54-55-4E-01
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
8. Wait a few seconds to see if there are changes - client ipconfig taken (no IPv6 address - DHCP lease time extended 1 second?)
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Computer
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : roc.mn.charter.com
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : roc.mn.charter.com
   Description . . . . . . . . . . . : Intel(R) 82566DC-2 Gigabit Network Connection
   Physical Address. . . . . . . . . : 00-1E-8C-2B-1B-8D
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::7535:633a:5ca9:b7be%10(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.225(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.224
   Lease Obtained. . . . . . . . . . : Sunday, December 27, 2009 10:29:48 AM
   Lease Expires . . . . . . . . . . : Tuesday, December 29, 2009 10:29:47 PM
   Default Gateway . . . . . . . . . : fe80::225:9cff:febe:e726%10
                                       192.168.1.254
   DHCP Server . . . . . . . . . . . : 192.168.1.254
   DHCPv6 IAID . . . . . . . . . . . : 251666060
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-10-F7-21-EE-00-1E-8C-2B-1B-8D
   DNS Servers . . . . . . . . . . . : 192.168.1.254
                                       24.159.193.40
                                       68.115.71.53
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 6:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : roc.mn.charter.com
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 7:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 02-00-54-55-4E-01
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
9. WHS server -"hard" rebooted - wait for WHS to come up and stabilize - all connectivity works (including to WHS server) - client ipconfig taken (IPv6 is back - DHCP lease time reduced 1 second?)
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Computer
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : roc.mn.charter.com
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : roc.mn.charter.com
   Description . . . . . . . . . . . : Intel(R) 82566DC-2 Gigabit Network Connection
   Physical Address. . . . . . . . . : 00-1E-8C-2B-1B-8D
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2002:4b86:9d9a:0:7535:633a:5ca9:b7be(Preferred) ******
   Temporary IPv6 Address. . . . . . : 2002:4b86:9d9a:0:740d:b08d:72f5:a267(Preferred) ******
   Link-local IPv6 Address . . . . . : fe80::7535:633a:5ca9:b7be%10(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.225(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.224
   Lease Obtained. . . . . . . . . . : Sunday, December 27, 2009 10:29:48 AM
   Lease Expires . . . . . . . . . . : Tuesday, December 29, 2009 10:29:46 PM
   Default Gateway . . . . . . . . . : fe80::225:9cff:febe:e726%10
                                       192.168.1.254
   DHCP Server . . . . . . . . . . . : 192.168.1.254
   DHCPv6 IAID . . . . . . . . . . . : 251666060
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-10-F7-21-EE-00-1E-8C-2B-1B-8D
   DNS Servers . . . . . . . . . . . : 192.168.1.254
                                       24.159.193.40
                                       68.115.71.53
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 6:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : roc.mn.charter.com
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 7:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 02-00-54-55-4E-01
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e50:60:1612:3f57:fe1e(Preferred)
   Link-local IPv6 Address . . . . . : fe80::60:1612:3f57:fe1e%11(Preferred)
   Default Gateway . . . . . . . . . :
   NetBIOS over Tcpip. . . . . . . . : Disabled
10. Remote into WHS server - WHS Server ipconfig taken (IPv6 not configured)
Windows IP Configuration
Host Name . . . . . . . . . . . . : Server1
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : roc.mn.charter.com
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : roc.mn.charter.com
Description . . . . . . . . . . . : SiS191 1000/100/10 Ethernet Device
Physical Address. . . . . . . . . : 00-0A-E4-86-A1-E5
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.229
Subnet Mask . . . . . . . . . . . : 255.255.255.224
Default Gateway . . . . . . . . . : 192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.1.254
DNS Servers . . . . . . . . . . . : 192.168.1.254
                                    24.159.193.40
                                    68.115.71.53
Lease Obtained. . . . . . . . . . : Tuesday, December 29, 2009 7:11:50 AM
Lease Expires . . . . . . . . . . : Wednesday, December 30, 2009 7:11:50 AM
11. Unplug WHS server cable from router - for network stability until this issue is fixed.
I know very little about IPv6 - but this looks like it is IPv6 related - is it? Any ideas as to next steps?
Note:
1. I can't remove IPV6 from all clients - the configuration of one client computer is not under my control.
2. I am thinking of either setting the WHS server to a static IP address - or enabling IPv6 on it - but it would be great to be working from a position of knowledge that blindly trying things...any isight would be appreciated...
Thanks,
Message Edited by userid99999 on 01-01-2010 02:00 PM

Failure to connect - host not responding

Similar Messages

Maybe you are looking for