Failure to instal new updates

my rMBP is stuck when installing new updates and it requires me to close safari and i did but it wont install the updates?
any help is greatly appreciated

Open System Preferences > Users and Groups > Login Items, choose "iTunesHelper" and press - button to remove it, so it won't start automatically. Then, restart your computer and try to install updates

Similar Messages

I have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.

i have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.

Given the state your device is in you have already erased your old stuff. You have an image on the screen that says, "Connect to iTunes." That's what the image means. So you will need iTunes on your computer.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS from iOS 5 or Later
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

I can not install new update in Photoshop CC, does any one know, how I can install the new update?

I can not install new update in Photoshop CC, does any one know, how I can install the new update?
Photoshop CC show me, if I look on "Help" -> Update, there is no update. But my actual license is very old....
I tried it, to do it manual. But there is also some problem.

totally agree. at this point i could care less if "apple" supports it. i'm not renting my ipod touch, it's mine. i paid for it. and i'm not asking to do anything illegal with it, all i want is to get rid of this POS ios6 and get back to being able to use my ipod touch the way it was before...working.

Several times a month, when I go to open Firefox, it says "wait installing new updates". After they are installed, Firefox won't open, it says "page not found." I have to then reload Firefox. How can I stop these updates?

Before Firefox open the little window opens saying"wait installing new updates." Then after when opening Firefox, my home page says "can't find this page. I have plugged in the address: http://www.google.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official and it Firefox still won't open. I have to run the Firefox setup 3.6.3 on my desktop, to get Firefox to open on my home page. I would like to stop these automatic Updates from running; how?

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

I installed new update. It wanted me to create passcode, now I want to get rid of it. What do I do?

I installed new update and created a passcode. Now I want to get rid of it. How?

Settings>General>Passcode Lock>Off (you need to input passcode before you can turn it off)

Just installed new update to phone, now its saying plug into itunes but itunes doesnt recognise device

Just installed new update to phone 5s this morning, now its saying plug into itunes but itunes doesn't recognize device.
when the files were being extracted my pc stopped any idea of a fix?
or can i remove the update from the program files and re-download it for my phone to be functional again?

Hello giz mckenna,
The article linked below details a number of steps that can help get iTunes to recognize your iPhone.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
http://support.apple.com/en-us/TS1538
Cheers,
Allen

Installed new update on my windows 7 laptop. Now I tunes does not work! Help!

Installed new update on my windows 7 laptop. Now I tunes does not work! Help!

See Troubleshooting issues with iTunes for Windows updates.
tt2

Computer freezes after installing new updates

I installed new updates and went to restart the computer, the apple logo came on and the progress bar went a third across then locked up with the curser spinning. Each time I try to restart the same thing happens. I can only restart in safe mode, can anyone help me with this problem.

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Labview program to unistall and install new/updated software programatically

Hi,
I want to create a labview program to install and uninstall teststand deployment programatically.
Query : I have teststand deployment made and ready,wanted to deploy in 5 test PC's and for very first time it did work good. Now when I made updates in the modules, i made a new deployment with version increment. Now this time, i first uninstalled the previous deployment and reinstalled a new one. This time it took time to uninstall and install all 5 test PC's.
I wanted to automate this process through labview. I wanted to create a labview exe or installer which continusouly running on the client PC's looking for a perticular folder for new/updated deployment. If it finds, uninstall the older version if present and install a newer version of deployment.
I wanted to know what things i need to consider while making this type of labview program which uninstalls the older version and installs a newer one? I think i need to even reboot after uninstallation, before installing newer deployment. How make the program running even after reboot and continue the process?

I have the MS-6968 device and i want to use driver 1.4.x or 3.0.x. I found the driver 1.4.2.10 but i cannot find any WIDCOMMSecurity code.
So, can anyone give me a link for BTWPatcher.exe???
It cannot be found here (Jon's Bluetooth ) anymore.
Thanks

Installed new update iTunes Saturday - My file directory could not be found, so reset the directory path, 'it' asked me if I would like 'it' to re organise filing, I selected yes - Many tunes have been duplicated, some have disappeared. Any help?

Hi,
Installed a new update iTunes Saturday - My file directory could not be found, so I reset the directory path, and 'it' asked me if I would like 'it' to re organise my filing, foolishly (as a beginner, without checking) I selected yes - Many tunes have been duplicated, some have disappeared? Trawled through lots of misleading help files, mailed friends, tried many back routes into Apple web sites and they all wasted my time. Can anyone help?
I have discovered since then, that this resorce has been down over the weekend, which probably explains why I have had so many contradictory responses, so apologies if you all know what the prolem is.
My question is, my TIME MACHINE (which has not been used yet) was tried but looked nothing like that of the U Tube demo, so I am assuming that it needs setting up, however, it has been saving, I just do not know how to recover the data. Can anyone help?
Regads,
Cyfrommayo

(If you have a Time Machine backup, go to your User folder/Music/iTunes and select iTunes. Enter Time Machine and go to a backup of iTunes before the above happened. Then select 'Restore' on the bottom right.)
Eric,
Many thanks for your help.
Apologies for not being as skilled as you. I am unable to see what you are saying, can I ask, should I be in TIME MACHINE when I go to User folder/Music?iTunes or iTunes or Finder?
Cyfrommayo

How to install new update fpr mbp late 08

well when i bought new mbp after few days i done the check update and it download 2 firmware update for macbook pro.
then i re install the mac os x and afetr that those new updates are still not avaliable?

Firmware updates are performed on the logic board, not the current Mac OS X system, and therefore can normally be installed once per computer regardless of how many times Mac OS X is reinstalled. Unless Apple or an authorized provider swaps out the logic board while repairing the computer or they send a replacement back, those updates won't appear again.
(38743)

Failure to install the update for Adobe Flash Player "A required file (:3) could not be installed."

I've bee trying to install the update for Adobe Flash Player for some time and keep getting install failed....."A required file (:3) could not be installed." Of course I'm going to the suggested installation problems website but nothing there seems to address this specfic failure mode. Can anybody help?
Windows 7, IE9 browser
Message was edited by: skatcat1

Can't seem to post it to the forum directly, so maybe this will get through:
=O====== M/11.1.102.55 2011-11-29+21-25-19.819 ========
0000 00000010
"C:\Users\Dennis\AppData\Local\Temp\install_flash_player_ax_64bit.exe" -dlm
-install
0001 00001036 Software\Macromedia\FlashPlayer\SafeVersions/11.0 2
0002 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0003 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0004 00000020 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0005 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe
Flash Player ActiveX/ 2
0006 00000013 C:\Windows\system32\Macromed\Flash\Flash64_11_1_102.ocx
0007 00000015
C:\Windows\system32\Macromed\Flash\FlashUtil64_11_1_102_ActiveX.exe
0008 00000016
C:\Windows\system32\Macromed\Flash\FlashUtil64_11_1_102_ActiveX.dll
0009 00000019 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0010 00000011 1
=X====== M/11.1.102.55 2011-11-29+21-25-24.321 ========
=O====== M/11.1.102.55 2011-11-30+06-27-03.194 ========
0000 00000010
"C:\Users\Dennis\AppData\Local\Temp\install_flash_player_ax_64bit.exe" -dlm
-install
0001 00001041
=X====== M/11.1.102.55 2011-11-30+06-27-03.356 ========
=O====== M/11.1.102.55 2011-11-30+06-28-34.314 ========
0000 00000010
"C:\Users\Dennis\AppData\Local\Temp\install_flash_player_ax_64bit.exe" -dlm
-install
0001 00001041
=X====== M/11.1.102.55 2011-11-30+06-28-34.453 ========
=O====== M/11.1.102.55 2011-11-30+06-28-59.623 ========
0000 00000010
"C:\Users\Dennis\AppData\Local\Temp\install_flash_player_ax_64bit.exe" -dlm
-install
0001 00000020 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0002 00001040 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
=X====== M/11.1.102.55 2011-11-30+06-28-59.781 ========
=O====== M/11.1.102.55 2011-11-30+06-37-36.210 ========
0000 00000010
"C:\Users\Dennis\AppData\Local\Temp\install_flash_player_ax_64bit.exe" -dlm
-install
0001 00000020 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0002 00000013 C:\Windows\system32\Macromed\Flash\Flash64_11_1_102.ocx
0003 00001024 C:\Windows\system32\Macromed\Flash\Flash64_11_1_102.ocx 183
0004 00000015
C:\Windows\system32\Macromed\Flash\FlashUtil64_11_1_102_ActiveX.exe
0005 00001024
C:\Windows\system32\Macromed\Flash\FlashUtil64_11_1_102_ActiveX.exe 183
0006 00000016
C:\Windows\system32\Macromed\Flash\FlashUtil64_11_1_102_ActiveX.dll
0007 00001024
C:\Windows\system32\Macromed\Flash\FlashUtil64_11_1_102_ActiveX.dll 183
0008 00000019 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0009 00000011 1
=X====== M/11.1.102.55 2011-11-30+06-37-40.431 ========
=O====== M/11.2.202.235 2012-05-12+03-59-10.853 ========
0000 00000010
"C:\Users\Dennis\AppData\Local\Temp\install_flash_player_ax_64bit.exe" -iv 8
-install -au 1
0001 00000020 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0002 00001015 C:\Windows\system32\Macromed\Flash\Flash64_11_1_102.ocx 5
0003 00000018
0004 00001015 C:\Windows\system32\Macromed\Flash\Flash64_11_1_102.ocx 5
0005 00001015
C:\Windows\system32\Macromed\Flash\FlashUtil64_11_1_102_ActiveX.exe 5
0006 00000013 C:\Windows\system32\Macromed\Flash\Flash64_11_2_202_235.ocx
0007 00000015
C:\Windows\system32\Macromed\Flash\FlashUtil64_11_2_202_235_ActiveX.exe
0008 00000016
C:\Windows\system32\Macromed\Flash\FlashUtil64_11_2_202_235_ActiveX.dll
0009 00000019 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0010 00000011 1
0011 00000012
=X====== M/11.2.202.235 2012-05-12+03-59-15.768 ========
=O====== M/11.2.202.235 2012-07-18+18-26-40.707 ========
0000 00000010
"C:\Windows\system32\Macromed\Flash\FlashUtil64_11_2_202_235_ActiveX.exe"
-maintain activex
0001 00001011
=X====== M/11.2.202.235 2012-07-18+18-26-46.808 ========

Installed new update, now Itunes won't open

I installed the new update, now when I try to open itunes it just stays on the bottom. The arrow is under it like it's open, but the window doesn't come up. Also, it won't even force quit, to get it to turn off I have to reboot.
Jason

Jason, I just downloaded the latest update as well and sure enough, iTunes crashes during start-up every single time - the good ol' rainbow pinwheel keeps going and I can't force quit either. I will probably try to delete preferences or something. If you find a fix or if anyone else knows of a fix, I would very much appreciate it. By the way, I am running iTunes on a 15" MBPro and running the latest OS update. Wondering what computer you are running it on. Good luck. I will post back if I figure out a fix.

Trouble installing new updates, iTunes 8.0, java, security up 2008-006 ppc

it will not install any of the updates... iTunes 8 java update or the security i get a message about not having permission to write to folders when i have full admin privileges
_I get an error message:_
Make sure you have permission to write to /Library/Caches/com.apple.SoftwareUpdate/content/downloads/01/22/061-4745/KYwQP nY2dPTsCtWk28ChF8MZgwqrh7L2gH, then try again.
Make sure you have permission to write to /Library/Caches/com.apple.SoftwareUpdate/content/downloads/14/31/061-4471/hqHbz HLQ9cN25y6cx9CsXYqHXnB5cKSL8j, then try again.
Make sure you have permission to write to /Library/Caches/com.apple.SoftwareUpdate/content/downloads/43/40/zz061-_5456/Nq JjWzGN2pqKPmntm7tGqHqdLfZmkV88KQ, then try again._
I have looked for these folders and have got into library,cashes... until i get to the folder after downloads and there isn't one called 01, 14 or 43. I am confused as to what to do next??

Do not make your Mac bite off more than it can chew: do one update at a time. Some general guidelines on updating:
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html
And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
More information on using Software Updater here:
http://support.apple.com/kb/HT1338
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Signiature problem when instaling new update

I went to update the neweat sofware for itunes in which i selected it and downloaded it and then it suddenly stopped, bringing up a sign saying there is something wrong with my signiature and then i click ok and another sign comes up saying try to re-dwonload the sofeware and instale it myself in which doesnt work either.
I dont understand how i can access my signiature, what it is or how i fix this problem? I really want the new updates as i'd like to have the new software on my iphone

Hi Oliver,
Welcome to scn.Please try this.
ITM_NUMBER 000010,COND_ST_NO 941,COND_COUNT 01,COND_TYPE ZCO,COND_VALUE 10.700000000
In CONDITIONS_INX to change
ITM_NUMBER 000010,COND_ST_NO 941,COND_COUNT 01,COND_TYPE ZCO,UPDATEFLAG U,COND_VALUE X
CURRENCY.
Regards,
Madhu.
Edited by: madhurao123 on Oct 21, 2011 12:28 PM

Failure to instal new updates

Similar Messages

Maybe you are looking for