Failure to install CD 3 of Linux install set

Downloaded four zip files from the following location:
http://edelivery.oracle.com/linux
Unzipped them to the ISO files and then burned the four CDs - no problem and the CDs were validated as okay. During the install CD1 - no problem, CD2 - no problem, CD3- problem - wrong CD was the error message. So redownloaded, unzipped, and reburned CD3. Redo and precisely the same error.
THEN went to the following location and downloaded the five ISO images from here and burned the corresponding CDs.
http://linux.us.oracle.com/isofs/RedHat/RHEL4/i386/ES/U4
Burned the five CDs and they validated as okay. Install - CD1 - no problem, CD2 - no problem, CD3- problem - wrong CD was the error message. Precisely the same thing as above.
THEN - took both sets of CDs, and instead of my home machine I took them to an ed center and attempted the install on a spare machine and get exactly the same errors as above.
What is going on - seems like it always CD3 (regardless of the number of CDs) that croaks - how do I get Linux installed?
THANKS for any help - Ken Cooper

Did any of you ever solve this problem ? -
I have same issue with CD 3, no matter what I try it claims to be unable to read the darn thing !
The packages it has failed on so far is XDELTA / ZSH / SENDMAIL - all from CD3
I have tried burning a new CD3 copy -> same thing.
I changed the CD drive of the server. Dunno why it would accept CD1 and CD2 but not CD3 - anyway it didnt work either !
Tried using both CD's in another PC and was able to extract and view the faulted packages without a glitch !?!
I'm lost for clues . . .
Now i'll try fetching the CD3 again and burn a third copy....
And then i'll try to choose to few things that it might not need cd3.
If that also fails i'll throw everything away and ask them to use MySQL or MSSQL :)
Is there any way to copy the stuff to harddisk and run install from there !?
- just point me to the manual if I overlooked that possibility :) ?

Similar Messages

Official Arch Linux Install Guide needs edit

Aloha,
This line in the Official Arch Linux Install Guide
Official Arch Linux Install Guide
dd if=archlinux-XXX.img of=/dev/sdX
Needs to be changed too
dd if=archlinux-2010.05-{core|netinstall}-{i686|x86_64|dual}.iso of=/dev/sdx
Mahalo

Hum, well I don't know how to write a git patch. I guess it would be a good thing to learn though, but I have to go to bed now.
Hum..., after further looking at the this forums section I guess I posted in a totally wrong place Live and learn.
Last edited by hunterthomson (2010-05-26 13:16:47)

Installing Oracle 10g on Linux Server 5

Dear experts,
I am getting the following message when I tried to run the runInstaller on Linux Server 5 for Oracle 10g R2.
checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLiunx-1.0, asianux-1 or asianux-2
Failied <<<<
does Oracle 10g R2 not support installation over Linux Server 5 or what could be the possible reason for failure...plz explain

yea I have installed xorg packages
here is the error message that is given:
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall2008-01-07_04-37-54AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred..
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2008-01-07_04-37-54AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:222)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:202)
at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstaller.java:436)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:926)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
Exception in thread "main" java.lang.NoClassDefFoundError
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:222)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:202)
at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:151)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:984)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
now tell me what to do...plz

How can i install oracle 10g on linux cluster

Dear all:
please advice How can i install oracle 10g on linux cluster service ..
thanks ,,

Without RAC, you can only have one instance manage the database. One instance = one set of processes communicating via IPC.
Unless you know of a way to have processes use memory-based IPC across nodes, you need to pick a node and install & run the database software on that node.

Error while installing developer 10g on linux suse 10.0

Hi All,
This error appears while installing developer 10g on linux suse 10.0
http://img179.imageshack.us/my.php?image=errorso9.png

Try locate (using find command for example) the libjvm.so file (I assume that is located somewhere under $ORACLE_HOME (probably jdk or jre directory)). If you locate the path where this library resides, try to add that path to $LD_LIBRARY_PATH enviroment variable.
Use copy&paste method (for error message) rather than link to image.
It is much quicker operation and it may help to other people because they be able to find this thread via search engine.

Error while installing OWB on Redhat Linux

Hi,
I installed Oracle database on Linux , while installing oracle i got error
error while writing to directory /tmp/OraInstall<date> please ensure that this directory is writable and has atleast 60mb of disk space. Installation can not continue
then i did some thing and it went thru, now i am trying to install the OWB again i am getting the same error and i was browsing net past 2 days for a solution but i din't get one
while installing oracle i have not made any notes, that was my mistake
Please suggest me the possible solution or the Document which can guide me
Thanks in Advance
Suresh

Hi,
the problem is the logfile for the installation. Every oracle installtion writes a log file with this name in a predefined directory. Make the directory /tmp writable for oracle and extend the disk quota at least 60 MB.
Regards
Detlef

Oui-10207error while installing oracle 10g on linux in vmware

Hi,
I have installed vmware on windows 7(64 bit) on which i have installed Oracle Enterprise linux 5. I have set all the variables correctly. but when i try to install oracle 10g on linux, i get the error
OUI-10207:there is not enough disk space in the OUI swap area /tmp/OraInstall2011-10-17_03-44-48PM.Please make atleast 529KB of space avaivale and retry.
but i have around 95bg of space. My partitions are as follows
Device Boot Start End Blocks Id System
/dev/sda1 * 1 12551 100815876 83 linux
/dev/sda2 12552 13041 3935925 82 Linux swap/solaris
/dev/sda3 13042 13054 104422+ 83 linux
Please help me in solving the problem.
Thanks
Viraj

What is your swap size? try to increase size
execute below command on terminal, paste result here.
#swapon -s
#free
Tips : how to increase swap space
http://hackertrip.wordpress.com/2011/09/11/increase-swap-space/

Error installing OBIEE 11g on Linux 64 bits - Configuration Assistant fails

Hello,
I am trying to install OBISE1 on Oracle Linux 5 - 64 bits.
I've followed these steps:
1) Install Oracle DB
2) Install jdk Linux 64 bits (jdk1.7.0)
3) Install WebLogic
4) Install RCU
5) Install OBI 11g (Software only installation)
Until here, all is correct.
6) Configuration assistant failed:
[2011-09-12T12:04:58.844+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0]
[2011-09-12T12:04:58.845+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3149)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3039)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
[2011-09-12T12:04:58.846+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
I have fount posts with a similar problem, but is over Windows.
I appreciate any ide/suggestion.
Thank you in advance.
Regards,

I have seen that WebLogic is shut down, so I am trying to start up, but I can't:
starting weblogic with Java version:
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
Starting WLS with line:
/usr/java/jdk1.7.0/bin/java -jrockit -Xms512m -Xmx512m
-Dweblogic.Name=AdminServer
-Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy
-Dweblogic.ProductionModeEnabled=true -da
-Dplatform.home=/root/Oracle/Middleware/wlserver_10.3
-Dwls.home=/root/Oracle/Middleware/wlserver_10.3/server
-Dweblogic.home=/root/Oracle/Middleware/wlserver_10.3/server
-Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/root/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/root/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath
weblogic.Server
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
I have modified /etc/profile, including JAVA_HOME and PATH with the java PATH. And it is ok, because if I executed java -version I can see the new jdk:
java version "1.7.0"
Java(TM) SE Runtime Environment (build 1.7.0-b147)
Java HotSpot(TM) 64-Bit Server VM (build 21.0-b17, mixed mode)
Any idea¿?

Can't install Oracle 8 in Linux 6

I can't install Oracle 8 in Linux 6 because I encounted the
following error during installation:
Error during action 'Running startorcl.sql'.
Command: /u01/app/oracle/product/8.0.5/bin/svrmgrl <<!
@/u01/app/oracle/admin/orcl/create/startorcl.sql
exit
What should I do ? Please help me.
null

Bjarne (guest) wrote:
: Jameshow (guest) wrote:
: : I can't install Oracle 8 in Linux 6 because I encounted the
: : following error during installation:
: : Error during action 'Running startorcl.sql'.
: : Command: /u01/app/oracle/product/8.0.5/bin/svrmgrl <<!
: : @/u01/app/oracle/admin/orcl/create/startorcl.sql
: : exit
: : What should I do ? Please help me.
: I got the same error message, and I still haven't figured out
: what to do. If there are anyone who can help, I think we both
: would appreciate it. Please help us both.
Hi there!
The first thing you should do if you get ANY (almost) error when
installing Oracle Server in RedHat Linux v6,0 is to read this
document carefully: http://jordan.fortwayne.com/oracle/
After hours of struggle it finally worked for me :-)))))
Only two things to add here:
1) If you want to be able to connect to the Linux server
(telnet) and running utilities like sqlplus locally on the
server, you should copy the ".profile" file to the users home
directory, add the user to the group "dba" AND make sure that
the $ORACLE_HOME directory has execute permissions for members
of the "dba" group (mine had default ONLY permission for the
owner to execute).
2) The file "listener.ora" was (for some reason) written
with "oracle_sid" where it really should say the real SID name
that is in my case "ORCL".
I just can't thank the guy who wrote the step-by-step
Installation guide for Oracle on RedHat Linux enough... THANK
YOU!
null

Cannot install oracle 9i on linux (fedora core 2)

dear all members.
I cannot install oracle 9i on linux (fedora core 2)
progress bar stop at 17% no activity at hardisk. I wait for 15 hours , still no movement. file being copy is " naeet.o " , I am not sure how importance is it.
I try several times, but still similar result....
Amnuay U.
[email protected]

Hi,
I think that Feedbak forum is not the best place for this problem.
You should ask this into
=> Installation Forum : Database Installation
or
=> Linux Forum : Generic Linux
Anyway, you can find an install doc here :
http://ivan.kartik.sk/oracle/install_ora9_fedora.html
Nicolas.

How to install oracle rac on linux using virtualbox

Hi,
I have recently started working on oracle rac
I have system with 64 bit os windows 7 installed
core i3 processor with 6 gb of ram
I want to install grid infrastructure on linux running as a virtual machine
how can I install and configure it? Please help me .
can ubuntu work as a virtual machine for oracle rac?

Hi,
I suggest you use Oracle Enterprise Linux on your lab. There are a lot of step-by-step guide to install RAC on OEL. A good example is by Tim Hall, search Google for "Tim Hall Oracle Database RAC Installation".

Dual booting pre-installed Windows 8 and Linux?

I just bought a G780 with Windows 8 pre-installed. Ideally, I would also like to install some flavor of Linux. I've been searching but not finding much info on how difficult or time-consuming this would be, or if there are any special considerations or anything. I've found some guides on dual-booting Windows 8 and Linux but they were all for installing Windows straight from a disk, not anything where it's already pre-installed, and some indicated they thought it might be problematic to use a pre-installed version of Windows. Anyway I was hoping that if anybody has done this on the G780 or even a similar laptop that you could share how it went and any difficulties you encountered. I'm open to using any Linux distro if it'll be easy to install. I would appreciate any info you could share. Thanks.

I had issues with Windows 8 as pre-installed on my G580, my employer at the time was using Windows 7 only and would not allow upgrades for security purposes. I deleted the entire drive (including hidden) knowing at some point I would re-install Windows 8 or later from retail disk when needed.
Linux can resize partitions during the install process, but be careful not to disturb the hidden partition or the windows boot loader in the process. Linux Mint is the best yet for this purpose, OpenSUSE and Fedora failed, CentOS failed and Ubuntu was not able to boot, but did not "hurt" the windows partitions.
Good luck.

Where is the guide for Apache2/php5/10g/Linux install?

http://www.oracle.com/technology/tech/opensource/php/apache/inst_php_apache_linux.html
is now sadly outdated considering that the stable releases on all products are now:
Apache -> 2.0.52
Php -> 5.0.2
Oracle -> 10.1.0.3
I am looking to run namely these software versions on a Linux (Fedora Core and/or Debian) system, but can't find any worthwhile documentation anywhere (oracle, google etc.).
First of all I would like to know if it is even possible to run Apache 2.0.52/Php 5.0.2 with oracle-instantclient-basic-10.1.0.2?
I know that with Oracle 9i you had to install the whole 300MB client install to get things to work easy, but that time has surely passed?(!)
I am running oracle 10g on a seperate installment, and would like to connect to it with Apache 2 and Php 5. What is the best way to do this?
I don't want to sound rude, and I do not expect a full installation guide, but if somebody could tell me how to do this I would appreciate it. The apache part is easy, the tricky part is the --with-oci8 php part combined with the instantclient (installed correctly and added in ld.so.conf).
--with-oci8=/usr/lib/oracle/10.1.0.2/client/(lib) does not even remotly work. Whats the trick, if any?
YS
Anders Berg

I have been working on this issues for a few days now. I was able to get Apache 2.0.52, PHP 5.0.2 and Oracle 10g Client(Administrator option) to work. Here's my compile
export ORACLE_BASE=/opt/oracle
export ORACLE_HOME=/opt/oracle/OraHome_1
export ORACLE_SID=DBRAC
export PATH=$PATH:$HOME/bin:$ORACLE_HOME/bin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/usr/lib
./configure with-apxs2=/apache/bin/apxs with-oci8=$ORACLE_HOME --enable-sigchild
However, when I compile using '--with-xsl' option (I isolated the problem with this option), I cannot get a database connection. There's no error with the compile. Can anyone help me? Thanks in advance
Here's my actual command
./configure with-apxs2=/apache/bin/apxs with-oci8=$ORACLE_HOME enable-sigchild enable-track-vars enable-sockets enable-wddx with-curl with-mysql with-gd with-gettext with-ldap with-xsl enable-soap enable-discard-path --enable-exif

HOW TO INSTALL JDK1.4 ON LINUX PALTFORM AND HOW TO COMPILE A JAVA FILE

SIR PLZ KINDLY TELL ME THE PROCDURE OF INSTALL JSDK1.4 ON LINUX .
1.I HAVE DOWNLOADED IT ONA I HAVE INSTALL IN
/usr/local
but
2: do nt know how set the CALSSPATH and JAVA_HOME(ENV VARIABLES)
3:HOW TO COMPILE AND RUN THE JAVA FILE(JSP)

2.
export JAVA_HOME=/usr/local/jdk1.4.0
export CLASSPATH=.
(amending for your set up.)
Placing these in your /etc/profile file will make them run automatically on log in of a user.
3.
You need tomcat, probably, http://jakarta.apache.org.
Bhav

I want to install oracle 10g on linux.

i want to install oracle 10g on linux. my linux is red hat enterprise linux AS release 4. i downloaded 10201_database_linux_x86_64.cpio.gz. now, cksum 10201_database_linux_x86_64.cpio.gz shows 4294967295 while site says 2921604215. if i say gunzip /home/oracle/10201_database_linux_x86_64.cpio.gz gunzip: /home/oracle/10201_database_linux_x86_64.cpio.gz: unexpected end of file. now, please clear these doubts and also give me the link to steps on how to install. tnx

I tried with the following command and it works for me:
cpio -idcmv < 10*
without gzip before

Failure to install CD 3 of Linux install set

Similar Messages

Maybe you are looking for