Failure to Install PSE 7 after gettign licensing error (Vista machine)

Hi,
I was happily using PSE 7 for a few months and then got a licensing error. In a misguided attempt to fix that problem I uninstalled PSE 7 and tried to reinstall it (using the remove program app) and now I cannot install PSE 7 on my machine. When I run the installation program for it, it gets almost all the way through installation and then suddenly the last install screen says that it was unable to install and that my system has not been altered. All you can do is press "finish" and be bummed out that you still can't use PSE7.
Any advice? I think there is probably some artifact that PSE 7 has left on the machine that needs to be deleted to make for clean install environment but darned if I can find anything. If you go to the Adobe folder in Program Files, PSE 7 does not show up anymore. (I also had to remove PSE 6 because it stopped working in all of this, as well. PSE 5 is on my system but I haven't tried to open it).
Open to any and all good suggetions. Many thanks, Deb Whitman

Deb,
This Adobe tech note explains how to manually remove all (or at least most) traces of PSE:
http://www.adobe.com/go/kb405847
Then try reinstalling. If you still get a license error, see this FAQ:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Install_the_licensing-s ervice

Similar Messages

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

After effects licensing error

I installed the after effects cc demo and when i try to start it i get this error. ive already tried reinstalling and all that. is there any way to fix this???

uninstall, clean and reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
if that fails you'll need to troubleshoot using the install logs, Troubleshoot with install logs | CS5, CS5.5, CS6, CC

Can't install Encore 2.0 on new Vista machine

Called support on the 800 number today. Waited for 20 minutes only to discover that they can't help me over the phone with the 2.0 version of Encore. They can only support that here on the forum. OK then, here's my issue. This software was purchased by me for my job at a university. It is the educational version of Encore 2.0. My previous computer used for multimedia production was running XP SP2 and everything worked fine with the program. But, the software simply won't install on my new computer which runs Vista with SP1. I did deactivate the software on the old XP machine first, according to the instructions and was told I could now reactivate on a new computer. After going through the install motions at the very end of the process the software said "rolling back" installation and "could not be completed." All very frustrating. I had purchased the upgrade to 2.0 less than 18 months ago. But no tech support by phone. I will now assume that if I were to buy a CS 4 component tomorrow there will not be technical support via phone for the product after 2009. If someone can assist me with this it would be greatly appreciated.
Thanks,
Jeff

Hmm... guess it depends on the individual computer, or exactly what Encore and/or Premiere are doing at the time... 'cause I know I've read messages from people who have tried task switching, and whatever they were doing promptly stopped
I didn't pay much attention (can't even remember if it was Encore or Premiere, but think Premiere) but it seems to me that if the program was DOING something, like rendering, the operation failed when focus shifted to another program
Oh well... I've always just started Encore or Premiere and walked away for awhile unti it was done
So... I guess the best thing to do for anyone who wants to know... start something going in Encore or Premiere and then Alt-Tab to another program, and see what happens

Issue while installing NWDW 7.0 on Windows Vista

Hi all,
    Please give me your inputs in resolving my issue.
     I am trying to install NWDW 7.0 on windows vista machine(32 bit) and the installation stuck at the phase "Import Java dump". It's in the same phase from yesterday and couldnt proceed further/ throwing any error.
I have installed JDK 1.4.2_13 and using MAX DB version as "50095979_3   NW 7.0 Presentation - MaxDB Release 7.6.03 " from market place.
I have my time zone as GMT + 1.00 .
I 've referred few posts but couldnt figure out the solution.
Any pointers are highly appreciated.
Regards,
Sandeep.

Hi Senthil,
I've checked sapinst_dev.log file and couldnt find any error/ inconsistencies ecept the following oen which ended up incompletely.
    TRACE      2009-11-05 06:47:54.673 [synxcfile.cpp:339]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/NWDW7.0 Installables/51033522/JAVA_EXPORT/JDMP/IMPORT.XML to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB
INFO       2009-11-05 06:47:54.693 [synxcfile.cpp:493]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/NWDW7.0 Installables/51033522/JAVA_EXPORT/JDMP/I
I couldnt find dev_server0.log and dev_w0.log files .

After a licensing failure message, I tried to reinstall CS3 design standard but the error "Component Install Failed" occurred and I still am unable to use Photoshop or InDesign Please Help!

after a licensing failure message, I tried to reinstall CS3 design standard but the error "Component Install Failed" occurred and I still am unable to use Photoshop or InDesign Please Help!

J3liu1 I would recommend reviewing the installation log files for the specific error message which you are facing. You can find details on how to locate an interpret your installation log files at Troubleshoot installation with install logs | CS3, CS4. You are welcome to post any specific errors you discover to this discussion.

Licensing Error 6 After Clean Installing Mac OS 10.8.

I think it might have something to do with the fact that I forgot to back up the Photoshop Elements Library and Application Support files...I can't find any of the stuff they reference in the Licensing Error 6 Troubleshooting guide.
Is there way I can reinstall the application without having to buy it again? Do I need to give Adobe some information or something?
Thanks in advance for the help.

Okay, that never works. PSE isn't a tidy package like most mac apps. The installer strews stuff all over your hard drive like buckshot, most of it in places outside where apple says programs should install things. You will need to download and run this:
http://www.adobe.com/support/contact/cscleanertool.html
Then manually delete all the bits you can find. Don't just check applications, but also hard drive>library>application support, and your username>library>preferences. (Let me know if you don't know how to find these.)
You will need to do a complete install. If you are talking about PSE 10 (which version is this, by the way?), you can download the trial and enter your serial number into that.

Sims3 DVD authentification error after installing PSE 6

I have a strange problem with my MacBook Pro 15". I bought Sims3 and played it some weeks, then I bought PSE 6 for my photo editing needs. Now, the first time I wanted to start Sims 3 after installing PSE 6, the Sims 3 game starts, but when launching the city where to chose from my families, the error message occurs: "Disc-Authentification failed. Check of the Sims 3 Disc has failed, it could not be checked whether the disk is a valid disk."
Before asking the EA support, I checked updates (none), repaired access rights, checked my disc and reinstalled Sims3.
The EA Support hotline asked me to do a firmware update for my superdrive, but i don't find an available download.
Can someone help me?

Put the first disk in again, and set it to just install the DVD SP content, livetype, and motion content disks... if it fails, call Apple, as you might have a bad disk there.
But the applications themselves are already installed. What you're missing is the templates on those disks onlly.
Seems to me you can also just put the other disks in and install them one at a time.
Also, if this is an upgrade from a previous installation (FCP 5 or whatever) you really should do it as a clean install... all you need to have is your previous serial number.
Jerry
Message was edited by: Jerry Hofmann

Failure to verify licensing error when attemtping to install Portraiture

Using Adobe Photoshop CC 2014 and trying to install Imagenomic's Portraiture & Noiseware add-ons. Both show as installed when viewing my adobe add-ons page, but neither are showing up under filters in the program itself. When trying to install through the extension manager, I get the error "This extension cannot be installed because licensing verification failed."
Can anyone help? Thanks!

Hi Peter,
Uninstalling PS CS6 shouldn't make any difference to this problem so I wouldn't feel the need to do that.
Could you please email me the email address you're logged in as in the Creative Cloud desktop app? (my email address is [email protected])
If you could also please generate an Extension Manager log file and send it to me, that would be a big help.
1. Create a file named ExManCoreLibLog.YES. Only the file name is important. The contents of the file don't matter.
2. Copy this file to "C:\Users\<YourUserName>\AppData\Roaming\Adobe\Extension Manager CC\Log". If this folder doesn't exist, you can create it.
3. Launch Extension Manager CC.
4. Repeat your usual steps until you see the license error
5. Find the log file in "C:\Users\<YourUserName>\AppData\Roaming\Adobe\Extension Manager CC\Log"
Also, can you tell me whether you have any third party firewall software running that may be blocking connections to the licensing server?
Thanks for your patience with this.
Best wishes,
Fraser

License Error: License server general failure

Hi All,
I have a very strange problem on my computer. Since this morning I cannot open SBO as I get the error License Error : 100000000 License Server General Failure. I have uninstalled the full SBO including deleted all my SBO databases and the SBO-COMMON database. I then deleted my SAP folder in Program Files, restarted my PC and reinstalled SBO... still the same error. Error is just after I click OK on the login window. License Manager seems to be working fine and license also loaded fine.
Also just wanted to say that my license did not expire (or I don't think so) as I checked my file license text file and it looks like Compatibility License for Add-ons expires 20080115 and the rest of the users 99991231.
Any help appreciated!
Adele

Adele, just try to load once again your license file
What i have done is cut a little my license file, check 'Write to log' option, and tried to load this damaged file.
What i've received is:
1. 'General error occured' message box
2. ...SBOLicense\SBOLog.txt file with the following content:
<i>---
16/08/2006 15:23:44 PollSession - User: manager1, Session: 5
16/08/2006 15:23:46 GetSystemNumber - 000000000310449963
16/08/2006 15:23:46 GetInstallationNumber - 0020180382
16/08/2006 15:23:46 GetHardwareKey
16/08/2006 15:23:46 GetHardwareKey - HK: C1742774035
16/08/2006 15:23:47 PollSession - User: manager, Session: 2
16/08/2006 15:23:50 AddLicenseFile - Start
16/08/2006 15:23:50 LoadLicenseFile - File: C:\Program Files\SAP Manage\SAP Business One ServerTools\SBOLicense\Temp.txt, pse: C:\Program Files\SAP Manage\SAP Business One ServerTools\SBOLicense\SBOLASVerify.pse
16/08/2006 15:23:50 LoadLicenseFile - Failed: Unknown error #39
16/08/2006 15:23:50 IsNewFileOK - Failed to Load License File: 39
---</i>
PS: SBOLog.txt couldn't be created. in that case check the option 'WtL', apply the settings and reopen license service setting and then try to load a license file again

Getting a License Error while installing UFT 12.01 trial version

Hi,
I am trying to install UFT 12.01 trial version but its throwing a License error. I am clicking on "Install License" and selecting "Seat License" and clicking on "Next" It says "License Type set successfully".
But next time when i click on UFT icon on the desktop (after restarting my machine) it throws same License Error.
Please find the attached screenshots. Please help me to get UFT installed properly.
Thanks in advance.
Asha

Asha,
You may want to try reposting your question on the forums specifically for the UFT product. Here's the link.
http://h30499.www3.hp.com/t5/Functional-Testing-QTP/ct-p/sws-Fun_Test

Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...

Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support

Failure installing PSE 9 on osx 10.6.8

I'm trying to install PSE 9 but it fails with the following error
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 15 error(s), 1 warning(s)
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: 1879 Unable to copy file from "/private/tmp/.tempdirMAQ9IjjZ/Assets1/Adobe Photoshop Elements.app/Contents/Required/PDFL/Fonts/AdobeGothicStd-Bold.otf" to "/Applications/Adobe Photoshop Elements 9/Adobe Photoshop Elements.app/Contents/Required/PDFL/Fonts/AdobeGothicStd-Bold.otf" Error 0
ERROR: 1879 Command ARKCopyFileCommand failed.
ERROR: 5 Unable to delete file copy at "/Applications/Adobe Photoshop Elements 9/Adobe Photoshop Elements.app/Contents/Info.plist" Error 0
ERROR: 5 Error rolling back command ARKCopyFileCommand
ERROR: 4 Unable to get permissions of "/Applications/Adobe Photoshop Elements 9/Adobe Photoshop Elements.app/Contents"
ERROR: 4 Error rolling back command ARKCreateDirectoryCommand
ERROR: 3 Unable to get permissions of "/Applications/Adobe Photoshop Elements 9/Adobe Photoshop Elements.app"
ERROR: 3 Error rolling back command ARKCreateDirectoryCommand
ERROR: 2 Unable to delete created symlink at "/Applications/Adobe Photoshop Elements 9/Adobe Photoshop Elements 9"
ERROR: 2 Error rolling back command ARKCopySymlinkCommand
ERROR: 1 Unable to get permissions of "/Applications/Adobe Photoshop Elements 9"
ERROR: 1 Error rolling back command ARKCreateDirectoryCommand
ERROR: The following payload errors were found during install:
ERROR: - Adobe Photoshop Elements 9_LangPacken_US: Install failed
ERROR: - Adobe Photoshop Elements 9: Failed due to Language Pack installation failure
any idea

I'm Windows as well, but the Mac Technical specs say "Mac OS X v10.7 through v10.9" so she may need to upgrade the OS.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

I am unable after 7 hours of Adobe help install PSE 12. It always stops at Sharing Technologies?

I am unable to install PSE 12 after 7 hours on Adobe help. It always comes with an error as soon as shared technologies comes up
Any suggestions?

start here, Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows

License Error on Final Cut Studio install

We just purchased Final Cut Studio 5.11 from the Mall of America Apple Store. After entering the serial number for Final Cut Studio, the Install screen moves on to the installation type, but gives me the following error,
"Licensing Error: The license file will not be written to disk because the user does not have enough privileges"
I have one account on this machine, which is the Administrator account, I am logged into it during installation, I even have a done a few things that made it ask me for my password, and this still comes up.
After encountering that error, i was still able to install the software, but none of the programs will run, each asking for name/company/serial, then telling me the liscense file is not found.
Help!
thank you!
Ross Hendrickson

I can't seem to find the license file, i've looked under library, and application support.
I have checked on my permissions, and I have read&write permissions to my home folder, applications, system, and both library folders.
In the Final Cut forum it said people were having problems with upgrading. I had an old version of FCP that I thought I had deleted, but maybe that is causing problems? Should I somehow uninstall all FCS/FCP info and start over?
thanks!
-Ross

Failure to Install PSE 7 after gettign licensing error (Vista machine)

Similar Messages

Maybe you are looking for