Failure to Launch iTunes after Upgrading

I recently upgraded iTunes to whatever version is most current, and I cannot open it. Whenever I try to open it, I get a message that says
Error writing to file: C:\Program Files\iTunes.Resources\iTunes.dll Verify that you have access to that directory
and it tells me Retry or Cancel. i have to click cancel because retry just brings the same message up. when i click cancel, it tells me "Fatal error during installation"
I have tried reinstalling the new itunes. i have even tried completely uninstalling it, but i cant do that either, it tells me the same thing about verifying that i have access to that file.
please help. i miss my music.

+Error writing to file: C:\Program Files\iTunes.Resources\iTunes.dll Verify that you have access to that directory+
I associate that sort of message with file damage. (Often it will come with a 2330 error message number.) As often as not, the damage is associated with disk damage near the location of the file.
So let's try running a chkdsk over the C drive:
How to perform disk error checking in Windows XP
Does the chkdsk find/repair any damage? if so, does an iTunes install go through properly afterwards?

Similar Messages

  • Problem launching itunes after upgrade to version 7.

    launching itunes in another newly created 'administrator' ser name does work. how can i get it to launch with my normal username ? i tried deleting the apple folder in local settings, and application data under my normal username or copy the folder from the new 'administrator' into my normal username, but to no avail yet....
    Any help ?

    Hi Jason,
    I went through the whole msconfig menu and tried to launch itunes but no luck.
    Also deleting the file in C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\SC Info did not work. After I restarted and launched itunes, box came up stating it was installing itunes, but then it disappeared again. It is still trying to launch and I can see it appearing for one second in the Task Manager if I try to open itunes, but then it disappears and all goes quiet.
    I have a Trend Micro Office Scan system operating on my lap top. But then again the 'administrator' user account uses the same settings and can launch itunes....
    so the multimilliondollar question is how can I launch itunes within my own user account... Version 6 ran perfectly....

  • An unknown error occurred (-42110) when opening itunes after upgrading

    when opening itunes i get "an unknown error occurred (-42110) when opening itunes after upgrading to latest version.

    Try the following user tip:
    iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

  • IPhone wont show up in itunes after upgrading to leopard and iLife 08

    Hello:
    For some reason, my iphone does not show up on my itunes after upgrading my mac to leopard and ilife 08. The phone was syncing properly before the upgrade. I also installed all the patches that were available for downloading but I did not try syncing between the main update and patches. I am running itunes 7.6 and had been running 7.5.1 before that. My iphone is on firmware 1.1.2 and I have it set to manually sync. My ipod video is syncing fine but I had that set to automatic syncing.
    I checked the system profile and the usb is showing the iphone just fine.
    Can anybody help?

    Yup. It does work, had the exact same problem, iPhone showed in system profiler under USB, and iTunes would not recognize, reinstall fixed it all. It almost looks like a permission problem after the reinstall to where some .plist files got wrong settings set, repairing permissions might work too.

  • Can't launch color after upgrading to OS 10.5

    I can't launch color after upgrading to OS 10.5. The message shows " Unable to initialize OpenGL. Make sure Video Desktop is disable." Can anyone help please?

    Click here and follow the instructions.
    (46092)

  • How to fix connecting to iTunes after upgrading to ios6

    How do I connect to iTunes  after upgrade to ios6

    iTunes on your computer or the iTunes store?
     Cheers, Tom

  • Lost music from iTunes after upgrading MacBookPro to OS X Yosemite

    Lost music from iTunes after upgrading MacBookPro to OS X Yosemite. Has anyone had this problem? How did you re-import all your lost music? My iTunes currently only contains all of the music I have purchased from the iTunes Store but nothing that was burned to my iTunes. All of my music files still seem to be located on my hard drive within the iTunes folder but they did not re-import into the library during the upgrade to Yosemite. Thanx for your help.

    Hi OrangeOAK,
    Thanks for the question. If I understand correctly, you still have the music on the computer but need to re add it to iTunes. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    Adding music and other content to iTunes - Apple Support
    Adding content on your computer to iTunes
    iTunes helps you add digital audio and video files on your computer directly to your iTunes library. You can add audio files that are in AAC, MP3, WAV, AIFF, Apple Lossless, or Audible.com (.aa) format. If you have unprotected WMA content, iTunes for Windows can convert these files to one of these formats. You can also add video content in QuickTime or MPEG-4 format to iTunes. To learn how to add these files to iTunes follow the steps below.
    Open iTunes
    From the File menu, choose one of the following choices:
    MacAdd to Library
    Windows
    Add File to Library
    Add Folder to Library
    Navigate to and select the file or folder that you want to add
    If iTunes is set to "Copy files to the iTunes Music folder when adding to library," iTunes will copy all content that is added to the iTunes library to the iTunes Music folder. To adjust this setting or change the location of this folder, go to the Advanced tab in iTunes Preferences.
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • I'm still struggling with being able to sync ipad3 and iphone 4s to itunes after upgrading software to ios 6. I've gone through all the recommendations by Apple and suggestions from other forums and nothing seems to work. Help!!!!!

    I'm still struggling with being able to sync ipad3 and iphone 4s to itunes after upgrading software to ios 6. I've gone through all the recommendations by Apple and suggestions from other forums and nothing seems to work. Help!!!!!

    Sounds like you have a battry issue but don't want to believe it.
    If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
    BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
    Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
    Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call?  You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
    Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
    <Edited By Host>

  • Cannot open iTunes after upgrading to 7.3.1

    Just traded my mini for a nano and upgraded from iTunes 6. I was able to install 7.3.1 (Windows XP) and sync the ipod so all of my music is on it, no problems. But after I closed iTunes after the syncing I can't re-open iTunes at all-- I get the message:
    'The iTunes Library.itl file cannot be found or created. The default location for this file is in the iTunes folder in the “My Music” folder'
    Please help!! Thanks.

    +HOWEVER, once my library finished loading into iTunes, another error message came up:+
    +The iTunes library file cannot be saved. An unknown error occurred (-1302).+
    Okay. It's sounding like there was some problem with the original library file (that you had for the previous version) that has been preventing the library update from going through properly. That would fit with the non-appearance of the new .itl file with the upgrade, and the problems with generating a new library file from the old version of the library file.
    So it might be worth trying a library recreation at this point in time. For instructions on that, the following document should be of some assistance.
    How to recreate your iTunes Library
    After the library recreation, does itunes launch properly? (without the 1302 we got from the attempt to revitalise the old library file?)

  • App Launching Unresponsive After Upgrading to Snow Leopard

    For reasons I do not quite understand, launching any app, and doing many things within them (basically, instantiating any process) is extremely slow after upgrading to Snow Leopard. For instance, opening a new window in Terminal takes a full 22 seconds (I've timed it) to go from "login" to the zsh prompt. Before, it was instantaneous. There is nearly nothing installed on this computer other than the bare essentials and some documents.
    This is obviously very frustrating and detrimental to my productivity. Here is what I've tried:
    - Reinstalling from scratch (I've now tried this two times). First, I backed up my home directory with SuperDuper and manually copied everything over. Everything was fixed, for about two days, and then it started doing the same thing again. Then, I cloned the entire disk with SuperDuper and restored from it. Again, everything was fixed for a little while and then I had the same problem again.
    - Most recently, I tried "Verify disk" in Disk Utility. This returned that there were errors (an "invalid directory count"). Therefore I rebooted into the installation disc and ran "Repair Disk", which outputted that the disk was repaired successfully. However, I rebooted back and now have the same problem.
    Does anyone have any suggestions as to what is going wrong? My first thought was that perhaps the hard drive is failing, but I've dual-booted Linux on another partition and it works fine.
    I am very confused. How can I fix this?

    Have you updated iTunes?

  • Can no longer sync Ipod to Itunes after upgrading to Itunes 7

    I can no longer sync Ipod to Itunes since upgrading to Itunes 7. When I try it freezes my Itunes and I have to force quit the application. Anyone else know how to solve this? Anyone else having this problem?
    Powerbook G4   Mac OS X (10.4.9)  

    I have the 3rd generation IPod and I thought it happened when I dropped it, but after thinking about it it did happen the same time I switched to itunes v7.
    I have to stop the auto-sync and have the ipod completely restored each time. So when I want to update my ipod I have make it an hour adventure.

  • Cant open itunes after upgrading to yosemite

    Cant open itunes on my macbook pro after upgrading to yosemite. Someone please help if they have faced similar issues.
    Thanks.

    Try Terence's instructions here  Is Iphoto gone ? i want it back!
    Pete

  • Problems syncing with iTunes after upgrading to OS5

    Hello,
    After upgrading my iPod 3G software to OS5, when I plug my iPod into my Mac (OS10.6.8), iTunes (v10.5) will freeze for several minutes before it can be used again. When I sync my iPod, iTunes will sync all my video podcasts to the iPod, even the ones that were already there, each and every time. I've tried resetting my iPod, but that hasn't worked. Wondering if other people have experienced the same problems and if anything has worked?
    Thanks,
    Clare

    Solved it.

  • My ipod touch is no longer seen by itunes after upgrading to snow leopard

    Just upgraded to snow leoprad and the device is no longer seen by itunes. My old ibook sees it but its itunes is not compatible. Please help...

    Try here:
    Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Iphone 4s not recognized by macbook or itunes after upgrading to  mac ios 10.8.5 and itunes 11.1

    recently upgraded my macbook to mountain lion os 10.8.5 as well as itunes 11.1. iphone 4s is currently at ios 7. Immediately after upgrading my computer i attempted to sync my iphone and itunes started bringing up error messages about my cloud storage and how my iphone had some sort of authorization issue, which is strange seeing as ive never had another apple account. next thing i know my device isnt even being read by itunes. tried unplugging it, using a different cord, reseting comp etcetc all the simple stuff and still no luck. it is not just itunes as my iphone is not even recognized as a device in my finder. i even restarted my iphone completely even knowing i wouldnt be able to get my music back on  it if this attempt failed and what do you know nothing changed after the restart. so now im left with no music and photos on my phone and am completely frusterated. please help

    recently upgraded my macbook to mountain lion os 10.8.5 as well as itunes 11.1. iphone 4s is currently at ios 7. Immediately after upgrading my computer i attempted to sync my iphone and itunes started bringing up error messages about my cloud storage and how my iphone had some sort of authorization issue, which is strange seeing as ive never had another apple account. next thing i know my device isnt even being read by itunes. tried unplugging it, using a different cord, reseting comp etcetc all the simple stuff and still no luck. it is not just itunes as my iphone is not even recognized as a device in my finder. i even restarted my iphone completely even knowing i wouldnt be able to get my music back on  it if this attempt failed and what do you know nothing changed after the restart. so now im left with no music and photos on my phone and am completely frusterated. please help

Maybe you are looking for

  • Vendor is not defined in Company code

    I created a vendor and a new material. For that material from the above vendor i created a PO and received. Now i am trying to create an invoice. It is giving the following error: No master record was created in company code "3000" for vendor number

  • The specified user or domain group was not found.

    I've got(or rather had) a single sharepoint FE that runs off a separate SQL backend server. I have separate Intranet, MySite, and Search web applications. Last night all three were working perfectly, and everything seemed fine. I came in this morning

  • FCPx (10.0.4) best HDD performance?

    Hi 1# I have one external 1HDD with everything pointing of RAW an project in that harddrive. 2# In my machine is the 2HDD that "apple" from AppStore installd the FCPx program, so its on the OSX Lion drive in machine. 3# And the third external 3HDD i

  • Apple mail crashes after Mavericks update

    My Apple mail crashes after Mavericks installation. There are also some other minor bugs that slow down the system but they are by and by adjusting, for example, the mouse took little time to ge tused to mavericks, but notw it is fine. Only issue is

  • After clicking "run" I do not get the setup wizard; I get a firefox setup stub 26.exe file in my downloads folder...?

    After opening the stub file I get a message asking if I want to allow the following program to make changes to this computer. After clicking "YES" the message window closes, a smaller message window flashes on and off, followed by nothing...