Failure to Load Project: OA Express Datatypes not Compatible with SignalExpress 2014

Hi,
since a few days now, I am trying to get SignalExpress 2014 Full running on my workstation. I deinstalled and reinstalled all National Instruments components multiple times, but I always receive the following error (see also the picture attached) when I try to open a certain project:
Failure to load project
Installed component versions are not compatible with the version of the SignalExpress 2014. Please install the latest versions of the following:
1) OA Express Datatypes
Previously, there was also "DAQ Assistant" mentioned in the list of missing components/components with incompatible versions, but I could solve this with installaing NI-DAQmx. But I could not find anything looking for "OA Express Datatypes" --- I neither know in what package this component is located nor what the purpose of this component is.
Any help is appreciated.

Just did a downgrade and it's working again, here are my versions.
linux 3.9.9-1
linux-headers 3.9.9-1
nvidia 319.32-2
nvidia-utils 319.32-1
bbswitch 0.7-4
If you have conflicts, I found it easiest to remove those (bbswitch, virtualbox in my case), downgrade linux and then install the appropriate bbs/vb packages

Similar Messages

"Airport Express" is not compatible with this version of itunes

Hello- My itunes reports that my airport express is not compatible with this version of itunes. My ipod and iphone no longer sync with the device either. Any suggestions? Thanks!

Does anyone out there have any advice? I have had no success correcting this problem........

I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

I have had this problem for close to a year. I have an Extreme base station, two Airport Express's and multiple G4 Mac's with up to date software. I have spent a huge amount of time trouble shooting, resetting, reapplying software and finally calling Applecare without any help. It would be great to get this problem solved.
Powerbook G4 Mac OS X (10.4.7)

Adobe Photoshop Express is not compatible with Note 4

Hi,
I am unable to install Adobe Photoshop Express on Note 4. I am unable to install the app from play store onto my Note 4. I get a message saying the device isn't compatible with this version. Its an issue that's persisting since October and has not been fixed yet. Could someone please work on the fix for Note 4 and kindly release an updated version. I had been using the app frequently and had bought the noise reduction and premium look filters as well. Please fix this issue ASAP.

This has been fixed in latest release of PS Express.
Thanks

Express Lane not compatible with Firefox 5

Though not strictly a Support Communities topic, thought I'd report that when I use Firefox 5.0.1 to enter an Express Lane incident, I get as far as the "Issue Description" tab. At that point, the text area to enter the issue description is blank. This doesn't happen with Safari or Chrome.

Express Lane is for registered users of Apple products that are still under warranty (not for third party applications like Firefox).
The form to use is listed here:
Contacting Apple:
http://www.apple.com/contact/

This application is not compatible with your device and cannot be loaded

Hi,
I have been trying to load an application to my BB 9000 since a monday and getting this error "This application is not compatible with your device and cannot be loaded".
As evident, I am new to BlackBerry development and got to port an existing J2ME project on BB 9000.
To load application I am using
- BB Dektop software 5 (latest)
- BB Device Software 4.6 is installed (which is the version of BB 9000 as well)
I am able to load sample JDE 4.6 applications but I build my project through same JDE and through eclipse (JDE compoment 4.6.0.19) as well but couldn't load it,
I even signed my app since I am using net.rim.device.api.servicebook api which requries signing.
Can someone please explain me
1) why this error occurs in first place
2) how to setup right envioroment to load an application on a given BB handset (BB 9000 vodafon India to be specific)
3) How would manage this process on a single machine if I have 4-5 different BB handsets.
I shall be thanful for any logical pointer to solution to these problems.

Hi,
The main problem with your genrated ALX file. I think in your ALX file contains <fileset Java="1.49" _blackberryVersion="[5.0.0)"> TAG and remove the _blackberryVersion attribute. Then it will work.
So your final ALX file contains
<loader version="1.0">
   <application id="App">
       <name >
           App1
       </name>
       <description >
       </description>
       <version >
           1.0.0
       </version>
       <vendor >
            Vim
       </vendor>
       <copyright >
           Copyright (c) 2010
       </copyright>
       <fileset Java="1.49">
           <directory >
               5.0.0
           </directory>
           <files >
               App.cod
           </files>
       </fileset>
   </application>
</loader>
Even thought it is not installed then make sure that your application may not delete from your device. Select the application and click on delete button in Desktop manager.
Still u didnt slove the problem then insted of
<directory >
               5.0.0
    </directory>
replace as
<directory >
</directory>
Regards:
Jitendra.B
Vimukti technologies Pvt Ltd
Project Manager

Moved Premiere Elements 10 project Error: "Project is not compatible with current version of Premiere Elements"

After moving an entire client folder from an external hard drive to an internal one, the client's video, created in adobe premiere elements 10, will no longer open in adobe premiere elements 10. It appears to be loading the project, and instead of completing, the following error message is displayed: "The project is not compatible with current version of Premiere Elements."
The same thing occurs when attempting to open the archive files.
New projects, and unmoved projects behave properly.
Moved projects receive this error.
I'm running Windows 7 Home Premium SP1 on a solid state drive (SSD) (c:/), where premiere elements is installed
My documents, including the project I need to work with are on my "storage" drive (HDD). it is (f:/)

txnoda
Archiving Aspects of this.....
First let clear the matter of the "archiving" as a life saver.... We do not appear to be on the same wave length.
a. I am talking about File Menu/Project Archiver with its Archive project and Copy project options. This feature is a safety net to save you when you
inadvertently disconnect source media from the project file. With the Archive option (Trimmed Folder result), you get saved to the computer hard drive (safe keeping) a copy of the project file plus copies of the media that were taken to the Timeline. With the Copy option (Copied Folder result), you get copy of the project files plus copies of much more.
b. Instead, you appear to be talking about "archiving" in the context of AutoSaves. AutoSaves are saved snapshots of the project at various phases of the edit. They suffer from the same shortcomings of the original project that has been disconnected from its source media.
When you import media into a project, all you get are copies of the originals in the project. But, those copies need to trace back to originals at the locations where they were when first imported into the project. Moving, renaming, deleting files/folders that went into the project after the project save close leads to some very time consuming messy situations.
What to do....
If you can, put everything back the way it was. If not.....
Let me emphasis some factors..
You wrote
After moving an entire client folder from an external hard drive to an internal one, the client's video, created in adobe premiere elements 10, will no longer open in adobe premiere elements 10. It appears to be loading the project, and instead of completing, the following error message is displayed: "The project is not compatible with current version of Premiere Elements."
Here you mention specifically "client's video". Later you detail with .mod files converted to .avi. What kind of .avi? If you have converted to AVCHD.avi or H.264.avi, they have been found not to be compatible with Premiere Elements. You should not be able to import them into any new or old project.
From what you described, I am envisioning
"Video" Folder
which contains 2 folders named
"Timestamped Folder" with .avi files
and
"DVD" Folder with the project file (project.prel)
The project file has many files generated automatically in the course of it workflow. Where do you have them going?
(See Premiere Elements 10 Edit Menu/Preferences/Scratch Discs). If you have the Scratch Discs directed
"Same As Project", then we would expect all those files to be going to the DVD Folder in the above scenario.
If we could open the project and get greeted with some "Where is the file.....?" messages, that might give us some hope.
But that is not the case.
Consequently from what you have said, I am suggesting that the path of least resistance is try to recreate the "before".
Please review and consider.
ATR
Add On...Not sure if it will assist in the matter, but the following is the link to Adobe's document related to troubleshooting
damaged projects.
Troubleshoot a damaged project file | Adobe Premiere Elements

PE 13 - Project not compatible with current version of premier elements

I have PE 13 (recently installed on a system that also has PE 10)
I archived in PE 10 to a location, openend up the project with PE 13 and it appears to open just fine. I then save and close it and try to open it up a 2nd time and it fails with the error: "Project Not compatible with current version of premier elements"
I attempted to move all the media outside of the "Copied_XXX" folder per the troubleshooting steps, but it still fails even with all the media in a different location. Funny thing is that it knows about the media still because it appears in the loading content status bar at the very bottom left of the screen. it completes all 600 or so loads, but they are definitely not on timeline or listed in project assets.
Windows 7 Professional is the OS.

stegeler
There is no guarantee that a project created in an earlier version will open in a later one. The classical recommendation is to finish a project in the version in which it is created.
If you do want to try to edit the project created in the earlier version in the later version, then make sure to work from a copy of the original. Once you edit the project created in the earlier version in the later version, you cannot go back to edit the later version edited project in the earlier version.
If you have your Premiere Elements 10 project archived, then you do not want to go moving copies of the project's source media outside that Copied Folder. The copy of the project file in that folder needs to trace back to that copied media in that Copied Folder. What you are seeing in Premiere Elements 13 is probably conforming of audio and video files, processing of rendered files, and such, maybe even some indexing. You do not want to proceed in Premiere Elements 13 until you do not see any further activity in the progress bar at the bottom right of the workspace. Have Premiere Elements 10 and 13 been on the same computer?
How did you open the project file in the Copied Folder - right clicked the project file, Open With, and then selected Adobe Premiere Elements 13? What is the duration of the Timeline of the original project in 10?
Have you been working with a copy of the Copied Folder and its contents?
More on this in the morning.
ATR

Express 802.11n model A1264 not compatible with Mountain Lion?

I have an airport Express 802.11n model A1264. I have been using it with Mountain Lion for a couple of months. Some problems but it worked. Last nite it stopped. - flashing orange light. I am using Airport Utility version 6.1. The helpful? lady at apple support said that model of Airport Express (Gen 1 ) was not compatable with Mountain Lion and I need to get a Generation 2 Airport Express. Is there any other solution?

Hardware failure is a possibility but your Express is most certainly compatible with your version of Mac OS X.
weaversue wrote:
... I had pushed in the reset button on the AU Express -
To properly reset it to factory defaults requires that you depress its reset button continuously for about five seconds - long enough for the LED to flash rapidly, then release it.
After this the Express will create an open wireless network called "Apple Network nnnnnn" where nnnnnn = a set of characters unique to your Express.
Connect to that network by selecting it in the menu.
Launch AirPort Utility. It should find the Express.
If you are still having trouble unplug the Express and plug in to an electrical outlet near your iMac. Not only does this make it easier to perform another "hard reset" should you need to, it minimizes the potential for wireless interference to prevent communication. There is no need to have it connected to your modem as you configure it.
Only after doing all this should you begin to suspect the Express has simply failed. In that case bring it back to Apple for a final determination.
Don't let them tell you it is not compatible with Mountain Lion because I use the exact same one all the time. Even its preceding model is compatible.

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion =1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
== This happened ==
Every time Firefox opened
== FF updated to 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

HT1199 My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

You already have the software installed that you need if you have 10.8.2.
If AirPort Utility cannot find the Express, that is another matter. More software is not needed. More troublehooting is needed.
Power up the Express for a full minute
Hold in the reset button on the Express for 7-8 seconds and release
Allow a full minute for the Express to restart
Click the AirPort icon at the top of the Mac's screen
Look for a heading of New AirPort Base Station
Just below that, click on AirPort Express
What happens?

On mac yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014)

Need help-
On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????

Thank you station_two but I did install them in my
applications>adobe>presets>brushes and still I get this error message......
On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]>

When i try and load this brush pack i bought it says "Because this file is not compatible with this version of Photoshop"

Ive Restarted photoshop Multiple times and it still Doesnt work im on photoshop cs5 and i havent had this problem in a while but again this is a abr file.

If this problem still persists please verify that this brush pack is compatible with photoshop cs5-also it would help alot to know these things: if your photoshop is running on a apple operating system or windows operating system moreover what version of operating system. Some other things that could hinder this brush pack from working are its installed incorrectly or in the wrong place also resetting cs5 preferences can help. Last if what you posted originally is true and or accurate-"-when i try and load this brush pack i bought" it says "Because this file is not compatible with this version of Photoshop" Then it is exactly as it states a Brush Pack that will not WORK with CS5.

I made a project on my PC computer, saving it as a tif. I then took it to the Art Institute, editing it on their Apple I wish to tweak it at home but now Ps claims that it is not compatible with this cc version of Ps, where it was originally created! HEL

I made a project on my PC computer, saving it as a tif. I then took it to the Art Institute, editing it on their Apple I wish to tweak it at home but now Ps claims that it is not compatible with this cc version of Ps, where it was originally created! HELP!!!

The files are the same, regardless of OS version.
Most likely your file was corrupted when you transferred it.

HT5022 Is it true that Airport Express Utility 5.6 is not compatible with OS 10.8.2, even though the Airport Express Utility 6.2 that I have is said to be incompatible with my Express?

I've been having a problem with needing to reset my older Airport Express once or twice a week, and I thought that I'd check my settlings and possibly get any updates available. I'm told when I try to use my current version of Airport Express Utility (6.2) that I need to unstall the older Airport Expess Utility 5.6. But when I tried to install Utility 5.6, I was told that it was not compatible with my operating system. Is it possible that under 10.8.2, I no longer have an usable Airport Utility program available?

Welcome to the Apple Support Communities
Although OS X Mountain Lion comes with AirPort Utility 6, AirPort Utility 5.6 is perfectly compatible. Follow these steps:
1. Download AirPort Utility 5.6 > http://support.apple.com/kb/DL1482 if you have downloaded it yet, ignore this step.
2. Open Terminal and type:
cd ~/Downloads && pkgutil --expand ./AirPortUtility56.pkg ~/Downloads/AirPortUtility56 && gunzip -c<./AirPortUtility56/AirPortUtility56Lion.pkg/Payload | sudo tar -C / -xvf - "./Applications/Utilities/AirPort Utility 5.6.app"
3. Open Finder, go to Utilities folder and open “AirPort Utility 5.6” to set up the AirPort Express

Failure to Load Project: OA Express Datatypes not Compatible with SignalExpress 2014

Similar Messages

Maybe you are looking for