Failure to print from PSE 9.0 on MAC to Epson XP-800

I cannot print photographic images with my desktop MAC (OS X10.8.4) from Photoshop Elements 9.0 to my new Epson XP-800 printer. Printing is not a problem with Word text or images from iPhoto- it is only with PSE that there is a problem.  The problem persists even if I try using a cabled connection rather than WiFi.  I have ensured latest software from Epson has been downloaded.  This problem did not occur when using the same system with the previous printer (Epson Photo Stylus 1290).
Any suggestions for solving this rather than just a workaround of moving the edited PSE image back to iPhoto & printing from there (which admittedly does work but shouldn't be necessary).
Grateful for any help.
Stuart

Hi Barbara B
Thanks very much for this suggestion. 
I followed this advice, both deletions and permission repairs.  This did allow me to print from PSE for the first time - very pleased with this.  Unfortunately the colour reproduction has now gone haywire (having been very good) and there are vertical lines on prints - this now applies to both PSE & iPhoto (the latter worked well before)
Any further suggestions?  I feel we are close to cracking it but do not really understand what to try next. Please help if you can. Many thanks.
Stuart

Similar Messages

  • Can't Duplex print from Acrobat Pro 9.3.2 to Epson Artisan 800

    I can not duplex Print from Acrobat Pro 9.3.2 to an Epson Artisan 800.
    I an running it from a MacBook Pro with OSX 10.6.3
    I called Epson support and they could not help me.
    However they suggested that I try using Adobe Reader.
    Well that works OK if I choose to print the document as an image, but I would prefer to just be able to work within Acrobat Pro.
    Does anyone outthere have any settings within Acrobat Pro that would enable duplex printing?
    Thanks
    Dunc

    All this is totally different Screen (I use a HP DJ 990cse) This sort  amplifies Larry's Answer:
    Every Printer is setup naturally different.

  • How can I print from my iPad through my Mac Book Pro which is connected to a printer?  I was told I could do this.

    How can I print from my iPad through my Mac Book Pro which is connected to a printer?  I was told I could do this when the iPad and Mac Book Pro are synched together.

    Antique lady wrote:
    So If I download Printopia on my Mac Book Pro, do I go to iTunes to somehow connect the computer and the iPad? 
    No.
    Printopia (running on your Mac) connects the iPad to your printer.

  • Can I upgrade to PSE 13 from PSE 10 on my Mac?

    Can I upgrade to PSE 13 from PSE 10 on my Mac?

    Yes you can upgrade to the latest version from any previous version.
    Why not download the trial and try it free for 30 days.
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&PID=2159997

  • HT3939 how to print from iphone 4s on air/iprint-compatible epson nx430?

    how to print from iphone 4s on air/iprint-compatible epson nx430 printer?
    ...was succesfull printing from ipad2!!

    Thanks to searching the community I have got a result. Power off and reboot (press front home button together with top right button) = air print is now recognising my Canon air printer. This reboot is useful for clearing similar types of problems.

  • When i try to print from Parallels Desktop to my mac printer, it cannot convert the prescript file.  what should i do?

    i use Quickbooks accounting for windows and when i bought my new mac i had to buy parallels desktop so that i could continue to use my accounting software.  it has been working since then and i dont know what happened, but now when i print something i get a message saying that states "Unable to Convert The ProScript File".
    Help Please!!!
    Niko96
    i need this fixed a.s.a.p!!!!

    I don't have Parallels; I use Fusion. And in Fusion you have the option to use the installed printer is OS X to print. I have seen printing from Windows 7 to the Mac printer result in errors and there is a chance you are having the same issue.
    If Parallels has the same facility where you can use the Mac's printer then I would suggest that you install a Windows driver for your printer in Parallels and not use the Mac printer. This should stop the conversion error you are getting.

  • Borderless printing from PSE 7 Editor

    Having some trouble printing borderless 4x6 images from the Editor in PSE 7, (I prefer printing from the Editor over the Organizer due to its higher quality output).  I've tried a myriad of different settings from the Elements print dialogue window and am unable to consistently print images without some border being present, either just on one side, or on a top and side together.  Sometimes I can successfully print without the borders, but then when using the same settings on another image, I'm frustrated to see some type of border return.  The image in the print preview window will also vary from one image to the next, sometimes with borders, and sometimes without, however even when no borders are present in the preview, they'll still be there sometimes in the print. Never had a problem like this with Elements 4; using an Epson R1900, with printer driver set to borderless. If anyone else has encountered this, or has suggestions on what to do, I'd love to hear from you.  Thanks!
    Ethan

    Yes seems this is a bug. I will try using printing in PSE 8.0 when it will be released.         

  • Printing from Win PC to a Mac Printer

    Hi all.
    I have an Epson R300 connected to the USB port of my iMac, and shared through the System Preferences -> Printer and Fax -> Sharing options, and a Win 2000 PC in local network with the iMac through the ethernet ports.
    The PC can see the iMac and exchange documents with it, but I am having problems when printing from the PC to the R300. That is, when I try to set up a network printer using Bonjour for Win, everything is OK, except that at the end of the procedure a message warns me that I have not the rights to use the printer. I am logged as administrator on both computers, which additional rights do I need. Also, I restored the disk privileges where some printer file access privileges were corrupted, but had no change.
    I also tryed to use the procedure suggested in MacHelp, but I don't know what a SBM/CIFS printer is and how to set up it on the PC.
    Thanks a lot for help. Regards.
    iMac G5 2.0Ghz 20"   Mac OS X (10.4.3)   1Gb ram

    Vittorio, Welcome to the discussion area!
    Perhaps something on iFelix's site will help.

  • Printing from an applet on a Mac

    Printing from an unsigned applet is allowed by the java plug-in. When a print request is made it pops up a confirmation dialog after which the print job goes through on Windows. On a Mac, however, a security exception is thrown after the confirmation dialog:
    java.security.AccessControlException: access denied (java.net.SocketPermission localhost:631 connect,resolve)
    The entire stack trace is copied at the end.
    It appears that the applet is trying to open a connection to port 631 on localhost (Port 631 is the standard port for the IPP protocol). Usually an applet is only allowed to open a connection to the host that it came from (not localhost in this case). Therefore, the exception seems reasonable. However, when the print request is sent a second time the print job goes through! I don�t know why!
    Has anyone encountered this problem on a Mac (OS 10.4.7; Java version 1.5.0_06) ? Is there a solution? It works just fine on Windows!
    Thank you!
    java.security.AccessControlException: access denied (java.net.SocketPermission localhost:631 connect,resolve)
         at java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
         at java.security.AccessController.checkPermission(AccessController.java:427)
         at java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
         at java.lang.SecurityManager.checkConnect(SecurityManager.java:1034)
         at sun.net.www.http.HttpClient.openServer(HttpClient.java:459)
         at sun.net.www.http.HttpClient.<init>(HttpClient.java:214)
         at sun.net.www.http.HttpClient.New(HttpClient.java:287)
         at sun.net.www.http.HttpClient.New(HttpClient.java:299)
         at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:792)
         at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:744)
         at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
         at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(HttpURLConnection.java:836)
         at sun.print.IPPPrintService.opGetAttributes(IPPPrintService.java:1419)
         at sun.print.IPPPrintService.initAttributes(IPPPrintService.java:323)
         at sun.print.IPPPrintService.getSupportedDocFlavors(IPPPrintService.java:697)
         at sun.print.IPPPrintService.isDocFlavorSupported(IPPPrintService.java:773)
         at sun.print.RasterPrinterJob.getPrintService(RasterPrinterJob.java:431)
         at sun.print.RasterPrinterJob.setAttributes(RasterPrinterJob.java:1002)
         at apple.awt.CPrinterJob.setAttributes(CPrinterJob.java:130)
         at apple.awt.CPrinterJob.print(CPrinterJob.java:173)
         at sun.print.RasterPrinterJob.print(RasterPrinterJob.java:1200)
         at PrintTest.printApplet(PrintTest.java:47)
         at PrintTest$1.actionPerformed(PrintTest.java:25)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1882)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2202)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
         at java.awt.Component.processMouseEvent(Component.java:5554)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
         at java.awt.Component.processEvent(Component.java:5319)
         at java.awt.Container.processEvent(Container.java:2010)
         at java.awt.Component.dispatchEventImpl(Component.java:4021)
         at java.awt.Container.dispatchEventImpl(Container.java:2068)
         at java.awt.Component.dispatchEvent(Component.java:3869)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4256)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3936)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3866)
         at java.awt.Container.dispatchEventImpl(Container.java:2054)
         at java.awt.Component.dispatchEvent(Component.java:3869)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

    Yes!!  This is VERY HARD to find.  I literally spent ONE YEAR looking for solutions to my printing problems until I found this little drop-down box in the middle of the second or third dialog box that the Mac OS offers you when you're printing.  If you're still not finding it, ask us again.  I'm not in front of my Mac right now, and I'll be glad to give you detailed instructions.  I tried several hundred different things before I could get my photos to print well, and the secret was always right there, hidden in that tiny drop-down menu in the center of that dialog box.  VERY frustrating.

  • Printing from Airport Extreme for both Mac and PC

    I have both a mac and a PC. Both are connected to the internet using the Airport Extreme. Here's my problem. Currently I can only print from the Mac but not the PC. I was told that I would be using the airport extreme I would be able to use one printer for both computers. The printer I am using is an HP Office Jet 6310, which is compatible with both a Mac and a PC. Can anyone help me?

    I recently purchased a Canon Pixma MP610 and it is connected to an AE. My Macbook prints fine to it. My PC laptop doesn't. I used to have a Canon Pixma 1600 that printed fine for both computers (I used iFelix's 1004.html steps to install for the PC)
    I have tried the Add Printer on the PC using the same 1004.html steps with no luck. I have also used the 1008.html steps to install using the Bonjour Wizard with no luck.
    When I say no luck, I mean it sees the printer, it has the proper drivers, but when I print a test page, it can't connect.
    I Add a Printer and test and it fails, I then delete the printer and install it a different way. The weird thing is hours later, the test page will be there sitting on my printer. But I don't know why it took so long or which printer install method worked.
    I have now installed 4-5 different printers and hit Test Page on all of them. I named each printer something different so in case the Test page comes out, I'll know which printer works.
    I'm almost there I feel, but just can't get it.
    Any suggestions iFelix or anyone else?

  • Problems printing from PSE 11 on Windows 8

    I have not had a problem with printing until this week. I cropped an image 6 by 4, chose 6 by 4 paper, selected borderless and got a 1cm white border. The image did not fill the preview window, so it is not a border problem. I have to use the slider to enlarge the preview image. Why???

    Of course!
    I have been a PSE user since version 2 and have been through Epson and Canon A3 printers for the last 8 years.
    The problem has only manifested itself in the past few days.  The white space around the image is far too large to be a border that is obtained by choosing a border in the print options.
    As you can see from my screenshot the preview is also wrong. The print mechanism merely reproduces what you see on the screen.

  • Printing error message and failure to print from PhotoSmart

    I can do all of the various photo functions in photosmart, but when I click on Print, I consistently get the "Printing Error:The slected paper size is too small for the current print size."  At no point am I directed to select the paper size.  I know the process because occasionally it has worked.  There is no prompt for selecting paper size.  For this reason, I have to defer to another photo printing program.  Why can't I select a paper size and proceed to printing?

     I have tried creating the profile again and still get the same problem.  The problem is machine based and not user based. 
    Hi GG1234,
    If you recreated the Outlook profile and still got the same problem, please try to recreate the Windows Profile:
    Log on to client using local admin account->rename the profile folder under c:\users.
    By the way, did you try to print the mails in OWA?
    Frank Wang
    TechNet Subscriber Support
    in forum
    If you have any feedback on our support, please contact
    [email protected]
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Has anyone had a problem with printing from Elements 9 on a MAC?

    When I first installed Elements 9 and tried to print, all I got were blank pages.  I contacted adobe support and after an hour on the  phone, she referred me to the next level.  I then received an email from them asking me to call them and in the meantime, they suggested things I shoud do.  I did what they suggested and it worked.  I was able to print.  However, I was unable to indicate the type of paper or resolution that I wanted to print in.  So, I called them again.  It seems that on a windows PC, they give you five options for printing:  1.  Select printer, 2.  Select Settings, 3.  Select paper size, 4.  Type of print, and 5.  Select Print size.  On a MAC,  You get only three options:  Select printer, Select paper size and Select print size.  Does anyone know another way to select the settings and type of print.  I have been using Elements 4 for years with no problems.  Elements 4 gives all the  options.  I don't understand why it is not the same in Elements 9.

    Thank you so much.  You have solved my problem.  I never thought to click the down arrow.  In all the time I have been printing, on any program, the entire window opened up when I clicked on the print button.  This one never did.  I don't understand why Adobe support never told me about that when I called them.

  • Printing from photoshop elements 6 for mac

    I have an i-mac and use photoshop elements 6.  I have created hundreds of images but when i have contacted printers to print cards i created from these images using indesign i have been told by many printers that there is an issue regarding RGB vs CMYK .  Where and how can i get my RGB images printed for a reasonable price.  billrene

    The main question I have is whether or not there is an efficient way to get a rgb images printed.  I have an Imac whose screen is a rgb pattern so even if i convert the images to cmyk (which i can do in a couple different ways -- through indesign or putting the images in photoshop).  however since my sreen is a rgb format i can not acurately see the changes I have made through converting to cmyk.  also i have several hundred images i have created and would rather not have to convert them all before printing.  I have had problems finding a printer that will even attempt to print rgb images.  I have checked at kinkos as well as several print shops in montana where i live.  each time i am told they can  not print rgb. the images I sent to those printers were unusable because of the color distortions.   When I talked with some one in the Apple store they suggested I get a different computer.  It has also been suggested i get a printer that could be calibrated to the rgb format and i could print the images myself.  another suggestion i received was that there may be a calibration program/software that i could use to make the converesion.    Help.  billrene

  • Sharing a printer from a PC to my Mac

    I have a Epson Stylus Photo R300 connected by usb to a PC running windows xp home edition and I'm trying to share it via wireless network (I have a linksys wireless g router) to my powerbook g4 running osx tiger. I'm pretty good on a windows machine but this is my first mac so dumb it up please...
    powerbookG4   Mac OS X (10.4.3)  

    Hi ruffnready
    Welcome to the Discussion Forums
    No is the short answer. OS9.1 and above offered Printer Sharing for USB connected Printers using the USB Printer Sharing Extension and Control Panel.
    Another possibility and its a very long shot, is to use a Software RIP (if one is available for that model). You could then broadcast the resulting virtual Laserwriter Postscript Printer on the G3’s ethernet port and any other networked computer could then, in theory, connect and print to it.
    Hope this helps and is of some use

Maybe you are looking for