Failure to receive OCP Certificate

Hello Everyone,
I have cleared all my exams of Oracle 9i Certification Exam. On completion of OCA i did receive the OCA certificate.
After i completed OCP i did apply through https://ibt1.prometric.com/ for verification of the hands on course which i had attended. I received a mail that it has been verified and is a success. But when i again log in into the link https://ibt1.prometric.com/ it does not show my 9i exam results under the link Review Results.
I have not yet received my OCP success kit. Is there a problem in my verification?? Can anyone help me out on this.
Regards,
Malcolm

Hi Malcom
Welcome to our great oracle forum, as this is your second post.
See that...
Otherwise have you got the paper after you passed the exam with your score? Where have you passed your exam Oracle or a prometric test centre?
Please read those lines and also contact prometric hotline by phone.
I have not received my certification success kit. What do I do?
If you do not receive your Oracle certification success kit within 4-6 weeks of receiving verification that your Hands On Course Requirement Form has been successfully graded, please send an email to [email protected] and provide your name, Oracle Certification Program credential earned, Prometric ID number, current mailing address, and daytime phone number.
Regards,
Hub
Edited by: Hub on Dec 12, 2008 10:17 AM

Similar Messages

10g OCP certificate not received(waiting for 2 months)

Hi,
I have sent details requested for cetificate processing to [email protected] and given below is the copy of the details.
Full Name: xxxx
Oracle Testing id: xxxxx
Exam Taken : 1Z0-040-ENU: Oracle Database 10g: New Features for Administrators
Score: 100%
Email address:xxxxx
Mobile:xxxxx
I am waiting for my OCP 10g certificate. I completed the Oracle exam 1Z0-040 on Dec 1,2010 and its been more than 2 months now....
I completed Oracle 9i OCP in 2007.
Please let me know why i dint receive the ceritifcate (or anything is needed from my side) and when can i receive the certificate.
There is no reply from Oracle for couple of my mails.
I dont know how to escalate this matter and whom to escalate..
Please guide me...I want this certificate..
Thanks,
DB

DB wrote:
Hi,
Thanks for the reply.
I have already registered my details with certview. Sorry, I dont like getting sympathies from anyone.
I figured out the issue.
Since I completed Oracle 9i OCP with prometric and did 10g OCP with pearson, details of my 9i OCP are not reflecting in Pearson VUE.
I dont remember the prometric id.
But once i get the prometric Id, Can you please let me know how to merge the 9i OCP details in pearson VUE site?
Thanks,
DBOK. .... No sympathy then ;-)
However .....
It may (or may not) be you are suffering from having taking exams under two Oracle Testing Id.
What should have happened is that when you registered with Pearson VUE for your exam you existing Prometric Id should have become your Oracle Testing Id. If however you were allocated a new Oracle Testing Id then the exams will be against two different Oracle Testing Id's, and it will be as if 2 different people have taken the exams.
Please note exams passed under Prometric will never be shown on the Pearson VUE system .... however exams taken under both Pearson VUE and Prometric will show under Certview. So it is Certview where you need to look.
If you look under Certview and only see some of your exams, in particular those from Pearson VUE and not Prometric (allowing for lag of a week after you pass them), then you probably have taken exams under two Oracle Testing Ids.
To Summarise:
1) If under Certview you can see all of your exams .... then you do not have a problem of having two or more Oracle Testing ID's.
2) If under certview you can see all of your exams, but you do not have the certfications awarded you expect, then there would appear to be a problem with the pre-requisites Certview (and the Oracle Certification database) thinks you need and you think you need.
3) If under certview you can see your exams under Pearson VUE, but not under Prometric, then you probably have taken exams under two Oracle Testing Id's. You need to establish both of these and follow the procedure for + I have taken my tests under two different candidate IDs. How can I get these merged? + under the FAQs.
Basically certview helps to confirm if the certification was actually awarded (and a little investigation should show why it was not) or if the problem was a shipping error.
rgds - bigdelboy.

Still Not Received the certificate(OCP) From Oracle

Hi Everyone,
I have completed
Introduction to Oracle 9i: SQL on June 18,2009 (Exam Number-007)
Program with PL/SQL on June 21,2009 (Exam Number -147)
Oracle Forms Developer: Build Internet Applications on June 27, 2009 (Exam number-141)
But till October i didnt receive the certificate so
I have send mail to [email protected] along with Mailing address and my My Prometric Testing Id ,Regsistration Number ,site number(IIH63).
But still i didnt received my certificate, please anyone give me solution to get the certificate
Regards
Karthik
[email protected]

Vijay_karthik wrote:
Hi Everyone,
I have completed
Introduction to Oracle 9i: SQL on June 18,2009 (Exam Number-007)
Program with PL/SQL on June 21,2009 (Exam Number -147)
Oracle Forms Developer: Build Internet Applications on June 27, 2009 (Exam number-141)
But till October i didnt receive the certificate so
I have send mail to [email protected] along with Mailing address and my My Prometric Testing Id ,Regsistration Number ,site number(IIH63).
But still i didnt received my certificate, please anyone give me solution to get the certificate
Regards
Karthik
[email protected]
1) Are you able to logon to certview and confirm your status there?
2) Do ALL these exams show under your prometric testing history under a single Prometric Id.
3)
The support FAQs at [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=82#5Q1A] have a little bit which says:-
Receiving Certificate
I have not received my certification success kit. What do I do? ...
The relevant email address is :: ocp-fulfillment_ww .....
I think with the switchover to Pearson Vue there have been some delays. Also for some the post is not as good (and sometime post goes missing, people move, etc). However if you are able to access certview this is worth doing to ensure Oracle has the passes (and certifications) you expect recorded under your Oracle Testing Id. (That said some people can have difficulities accessing certview ... but certview should normally show where the problem lies).
(Please note my suggstions are not authorative as I dont work for Oracle).
RGds -bigdelboy.
Edited by: bigdelboy on 08-Nov-2009 09:38
Also please note you should have received a PL/SQL Developer OCA Certificate as well .. did you receive this? Also you have passed 3 exams in a short amount of time ... it isn't impossible to these 3 exams close together but it may be a little unusual to do so.

OCA/OCP Certificates

I gave my OCA exam on the 16th July and OCP exam on the 21st July 2010. I would like to know how long does it take for the OCA/OCP certificates to reach?

791653 wrote:
I gave my OCA exam on the 16th July and OCP exam on the 21st July 2010. I would like to know how long does it take for the OCA/OCP certificates to reach?I think it is a good time, or perhaps too late a time, for you to slow down and read the 'getting started' section of the Oracle Certification Website.
There are some concerning aspects of your post which means I neither want to answer the question for you even if I was able with the information given.

Fc2/y is down (Link failure: NOS received)

Please Help
UCSM : 1.4 (3l)
Storage FC Ports : fc2/1, fc2/3, fc2/5
error : fc2/5
B(nxos)# sh interface fc 2/5
fc2/5 is down (Link failure: NOS received)
from UCSM
fc port 5 on fabric interconnect B oper state:failed, reason:Link failure: NOS received
disable and enable port
error : fc2/5
B(nxos)# sh interface fc 2/5
fc2/5 is down (Link failure or not-connected)
wahtis the root cause problem?
Best regards

Hello,
NOS refers to "No operatioal sequence". Fibre channel has primitive seqences which are used to establish and maintain a link among the devices.
During the initial login phase,
1.Fiber channel switch sends a NOS signal
2.HBA connected to it sends an "OLS (offline sequence) signal.
3.Switch would send a "Link reset"(LR)
4.HBA responds with a "LRR (link reset response)"
When a NOS received condition is met,
•A signal loss or sync loss condition is detected.
•The port is administratively shut down.
•The port is operationally down.
When the port status is in "link failure or not-connected" state, it means that the physical path is not completely active or no active signals has been sent. Check the cables/SFP's if pluged in properly and check the configuration (port type, speed and vsan settings) for further troubleshooting.

Never received $10 certificate after MKX purchase

I received my Goro code in my email, but I have yet to receive my $10 gift certificate for pre-ordering the game.

Hi there flashtitan-
I hope that you are enjoying some four-armed beat downs with Goro in Mortal Kombat X! I’d be happy to provide you with a FATALITY around when you can expect to receive that certificate.
Generally, you should see the 500 points for the certificate post to your My Best Buy account in about 15-20 days. You may see the points actually post with a date from when you initially pre-ordered, so make sure you are looking for that on your account. You can also find more information on the process on our My Best Buy Gamers Club Get $10 FAQ here.
You should be able to find the answers to any additional questions you may have about the program there, but if not, feel free to post and we’ll help out if we can!
Thanks for posting,
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message

How do I get lost Sylvan OCP certificates re-issued/confirmed

I had done my Oracle 7, 8, 8i and 9i DBA OCP through Sylvan Prometric years ago and during a break-in at my house, the certificates got stolen. I now need to urgently get hold of these certificates, but Sylvan says that they are archived and I need to contact Oracle
I registered with Pearson Vue and after receiving my username and password, I went into my account history, but nothing shows up, as I had not done my certifications through them.
How do I go about to get these certificates re-issued/verified?

You should contact [email protected] and provide your name, as it was provided when you registered for your exam, your Prometric ID and the list of certifications in question. They will not be able to provide you with score reports from your exams, but they will be able to assit with replacing any certificates that you have earned. You should also let them know that you have created your profile with Pearson VUE and ask them for the information that you will need to get authorized on CertView. They should be able to provide you with the exact info to enter so that you won't have to wait for manual authorization.
Regards,
Brandye Barrington
Certification Forum Moderator

POP failure to receive. Server does not support encryption type

After working OK for 3 weeks or so, the POP and IMAP connections started failing. In a running client, it adds the error code 0x800CCC1A. When the server was first installed, it started doing that and it was resolved when I installed a valid CA certificate.
Outlook Anywhere and OWA continue to work, both inside and outside, and we never get any certificate mismatch errors. Oddly enough, I can send email with a POP (or IMAP) account but not receive. Since this seemed to point to the certificate, I have double
checked it. There are 4 certs, 3 are self signed: the Exchange Server Auth, Exchange Delegation and WMSVC. The 4th is the SAN cert, from a CA. I removed all services from the 3 self signed certs and the CA cert has all 4 services. The Auth Cert keeps giving
itself back the SMTP but the failure occurs even if I remove that cert. I have not found any errors in the event log that match the time of testing.
We are running Exchange 2013, CU7, on a 2012 R2 Std Server. The DC is a 2012 R2 Essentials server.
Any suggestions appreciated.
Lou
Louyo

Hi Lou,
According to your description, I understand that POP account can’t receive message with error “0x800CCC1A”, however it can send message without error.
If I misunderstand you concern, please do not hesitate to let me know.
I want to double confirm whether all POP3 account or some special account experience this issue?
Error “0x800CCC1A” means that the Secure Sockets Layer (SSL) encryption is turned on for your e-mail account or firewall prevent.
Please try to disable SSL to test: File---> Account Setting---> Change, switch to POP3 and IMAP setting then disable SSL.
If the issue persists, please try to run below command to ensure whether SSL or TLS is used for POP3:
Get-PopSettings –Server server1 | FL Identity, X509CertificateName
Best Regards,
Allen Wang

How to name the OCP certificate?

HI,
I passed all the four tests for OCP Developer. I am wondering what I should put on my resume since I haven't got the certificate yet. Can I say like "OCP on Internet Application Developer track"? Can somebody tell me the official way to name it? Thanks.
Kuang

as for latest Developer OCP it is Oracle Certified Internet Application Developer, Oracle Forms Developer Rel. 6/6i ...

Client Auth failure:SSLException Received fatal alert: bad_certificate

Friends,
I have managed to establish a one -way https connection between the client and the tomcat-server by keeping the client-Authentication=false
<Connector
enableLookups="true"
port="8443"
scheme="https"
secure="true"
maxProcessors="75"
debug="0"
clientAuth="false"
keystorePass="arps3241"
keystoreFile="/usr/local/tomcat/bin/arps-dev.keystore"
className="org.apache.coyote.tomcat5.CoyoteConnector"
          minProcessors="5"
sslProtocol="TLS">
</Connector>
. However , when i switch- 'on' the client-Authetication parameter i.e.clientAuth="true" in the server.xml for 2 way trust, I get the following error :-
javax.net.ssl.SSLHandshakeException: Received fatal alert: bad_certificate
     at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:150)
     at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:117)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.recvAlert(SSLSocketImpl.java:1584)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:866)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1030)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.writeRecord(SSLSocketImpl.java:622)
     at com.sun.net.ssl.internal.ssl.AppOutputStream.write(AppOutputStream.java:59)
     at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
     at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
     at org.apache.commons.httpclient.HttpConnection.flushRequestOutputStream(HttpConnection.java:827)
     at org.apache.commons.httpclient.HttpMethodBase.writeRequest(HttpMethodBase.java:1975)
     at org.apache.commons.httpclient.HttpMethodBase.execute(HttpMethodBase.java:993)
     at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:397)
     at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:170)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:396)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:324)
Can any body please guide me?

The server's truststore doesn't trust or possibly even recognize the client's certificate which came from the client's keystore.

Not receiving reward certificates in email

Hello
on 11/17/14 my reward point history shows a $15 reward certificate was issued but I've checked all my email and I don't see a single email from Best Buy regarding that. Are they snail mailed or emailed? How do I get that certificate I earned? Thanks for your help and Happy Thanksgiving?

Good very early morning rhaezor,
Thank you for taking the time to sign up for the forum!
All certificates are to be delivered via email; however, it depends on if your email address is up-to-date whether or not you actually receive the email. I would encourage you to double check your email accounts spam/junk or promotions folder because the certificate may have been sorted into one of those folders.
You should also be able to view your certificate by logging into your My Best Buy™ account on BestBuy.com. To ensure that you are able access your $15 certificate, I will be sending you a private message. You can check your private messages logging into the forum and clicking on the little yellow envelope located at the top of the page.
I hope you have great weekend.
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

Fc port 47 on fabric interconnect A oper state: failed, reason: Link failure: OLS received

Hi,
this UCS is connected to a qlogics SAN Fabric. We can see the LUN in ESX 5, but can't write. If we want write something to the LUN, we get the error above. We know that the qlogic Fabric is not supported by UCS, but its NPIV and i have a similar Installation which is doing fine.
Any Ideas?
Thanks, Marco

Hello,
NOS refers to "No operatioal sequence". Fibre channel has primitive seqences which are used to establish and maintain a link among the devices.
During the initial login phase,
1.Fiber channel switch sends a NOS signal
2.HBA connected to it sends an "OLS (offline sequence) signal.
3.Switch would send a "Link reset"(LR)
4.HBA responds with a "LRR (link reset response)"
When a NOS received condition is met,
•A signal loss or sync loss condition is detected.
•The port is administratively shut down.
•The port is operationally down.
When the port status is in "link failure or not-connected" state, it means that the physical path is not completely active or no active signals has been sent. Check the cables/SFP's if pluged in properly and check the configuration (port type, speed and vsan settings) for further troubleshooting.

Haven't received the certificate after registering AppleCare

Hello,
I've just registered my MacBook for AppleCare. I looked on the Apple warranty-checker and the dates have been extended as appropriate.
However, I have not received an email confirmation from Apple that this has been done. I am talking about the email that's called the "certificate", telling me that I'll also get one in the mail soon.
What should I do?
I doubt I entered the wrong address. My friend who also recently registered AppleCare in the UK the same way I did received the email only minutes after activating AppleCare.
Thanks in advance!
Hope you can help!
I can't seem to find an email address (or form) to contact Apple with; and I don't want to spend money calling - yet.

I called them, and they fixed it. Though, I had to pay for the phone call in the UK.

Yet to receive $10 certificate?

Pre-ordered Forza Horizon 2 on XBox One a few weeks back while the $10 microsoft point promotion was going on.
Picked up my copy on release day on Sep. 29th and I'm still yet to receive any e-mails regarding my certificate.
Received pre-order bonus car and my rewards points just posted to my account yesterday.
Just want to be sure I'm still going to be getting my certificate.
Any ideas other than calling customer service? Really don't like sitting on hold...

cclambert95,
It's my understanding that Xbox Live codes should have been sent to all eligible customers as of last week. If you still haven't received yours though, then you'll want to send a message to our Gaming-BBY inbox with the following information:
Message Subject: Game Title & Platform
Message Body: Include...
Proof of purchase (Customer Service PIN from in-store receipt or BestBuy.com order #)
Email address (the one you provided for the code)
One of our gaming specialists will then be able to review your order and determine why you might not have received your pre-order code.
I hope this helps.
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

SOAP Receiver Adapter Certificate issue

Hello Gurus,
i m working on RFC to SOAP scenario on SAP PI 7.3 and need help about SSL credentials.
We have been testet with SOAP UI Tool successfully (without Certifcates). Why not with PI?
Now we are facing an issue like
"iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier".
What should we do to solve this issue?
Target SOAP Url; https://www.xxx.com/PartnerCard/Partner.asmx
Kind Regards,
PM

Hi,
One more thing to check: while testing the connection from SOAP UI, did you use the same URL with https? Because, for instance for the web services generated in PI, you get two separate bindings: for http and https connections. So if using the secure https channel is not your requirement, you could just use the http binding from PI in your scenario.
Hope this helps,
Greg

Failure to receive OCP Certificate

Similar Messages

Maybe you are looking for