Failure to Register Error

I have tried to install Flash Player 8 ActiveX and received
the following message during installation:
Error 1904.Module
C:\Windows\system32\macromed\flash\flash8.ocx failed to
register. HRESULT -2147220473.
How can resolve this problem with installation?
Thanks.

Similar Messages

Windows XP-Why do I get a message saying Error: Failure to Register?

I have tried and tried to install the latest version of flash player, it will say downloading all the way up to 100%. Then it will give me an error message saying Error: Failed to Register. I have went through all the trouble shooting steps on the adobe site, but I still get the message. I think it is installing because I uninstalled the previous version but I will go to add/remove programs and it shows it there, but even though it's installed it will not work because of the failure to register. Does anyone know why it does this or what I can do to get it registered? Any help would be greatly appreciated.

======== M/10.1.51.95 2010/02/25 21:23:05.888 ========
0000 00000010 "C:\DOCUME1\ROSEWI1\LOCALS~1\Temp\Temporary Internet Files\Content.IE5\TQ0KJ8BC\flashplayer10_1_p3_uninstaller_022310[1].exe"
0001 00001018
0002 00001019
0003 00001021
0004 00001018
0005 00001019
0006 00001020
0007 00001021
Above is what it showed. Is that what you needed? When I try to download flashplayer I hit the download button on the first page, it seems like they wouldn't have something there that's not yet ready to be downloaded,but I'm sure you can tell I don't know alot about this. It's just really aggravating when I'm trying to look at something and it says that I need the latest version of flashplayer and it says get it here. So I click on that icon and when I try to install it I get that message. I'm about ready to pull my hair out. LOL
mvargas1 <[email protected]> wrote:
Hi Rose411,
This sentence "When I tried to download the latest version the instructions said to remove all prior versions from the computer and I did that so I'm really not sure." tells me you are trying to download/install the Flash Player 10.1 beta version of the player, from labs.adobe.com, which is still in development. Unless you have some compelling reason to install the beta version (for testing purposes, etc), you should install the released Flash Player 10 from get.adobe.com/flashplayer.
However, to fix the 'failure to register' error and enable you to install the release version of the Player, please do the following:
1. Download the FP 10.1 beta uninstaller from http://download.macromedia.com/pub/labs/flashplayer10/flashplayer10_1_p3_uninstaller_02231 0.exe and save it to your desktop (this uninstall file is posted at http://labs.adobe.com/downloads/flashplayer10.html).
2. Launch the cmd-window
2a. in XP, click Start > Run and type: cmd, then click OK
3. In the command window, change directories to the location where you saved the file in step 1. For example, if you saved it to the desktop, at the prompt type: cd Desktop.
4. Be sure you have ALL browser windows closed, including any application that may use the Flash Player ActiveX control (i.e. Yahoo Instant Messenger, etc). This will ensure that the player is properly removed.
5. After changing directories, type: flashplayer10_1_p3_uninstaller_022310.exe -force
6. The uninstaller will launch. Follow the prompts to uninstall.
After you run the uninstaller, launch Windows Explorer and navigate to C:\Windows\System32\Macromed\Flash and post back here what files, if any, are listed in the directory.
Thank you.
-m
>

"Failed to Register" Error on XP with SP3

Hi...I hope somebody can shed some light on this problem since it has become such a frustrating issue which I have researched for over a week now with no clear answer as to how to fix it!
It all started when I tried to update my Flash Player about a week ago. I have (Dell) Window's XP with SP3 and IE 8. At first I did NOT uninstall my old version of Flash Player as I thought the new one was just an update and would write over the old one. So when the new one downloaded and seemed to be doing good until about halfway through the install when it threw out an error of "Failed to Register" I just figured that maybe I did need to uninstall the old one first after all. So I uninstalled and then rebooted and did another installation, which turned out the same result -- Failure to register. I have tried various things suggested here and also by others on the Internet with no luck at all. However, I did not monkey around with the registry, I am too nervous of that sort of thing and read over and over again that those that did try that route did not have any success anyway.
Also, I want to make it clear that I am signed on as the administrator of my PC. I can make changes and have in the past so it is not that at all. I do not understand why this problem is persisting and although so many folks are having trouble with it Adobe has not found a solution that will work reliably for us.
One other note...I have also tried to update Flash Player on two other machines we have here at our house.... both of those also gave me the exact same error, the failure to register message. One of those machines is a Dell that is running Window 7 with IE 8 and the third machine is an Asus laptop running XP with IE 7 or 8...I'm not sure which and I don't have it here at the moment to check. But as you can see, with three different machines throwing up the same error message it is not just an isolated incident with my main PC. It seems to be a universal problem.
Has anyone had any luck since the last posts here where folks complained of the same thing? It's so frustrating since I rely on my main PC and can't do many of the things I used to without Flash Player available to me. I only use IE or AOL to browse the Internet. Any suggestions?

Chris,
I'm sorry I have not checked the message board but I have been pretty sick...however, I wanted to say that I did finally get Flash to install. At first, I was totally against downloading the Microsoft fix that goes into the registry to remove register keys that might have been left behind so I kept that for the very last option and only if everything else failed. Everything failed. So I downloaded the two items needed to do the job. The one item had to be unpacked and put into the same folder as the other (sorry, I can't recall what they were called and I am using my iPad and not on the PC where I have the info...) and then you click on the installer which starts the registry fix. It took several minutes (while I sweated bullets!...not real crazy about messing with the registry!) but in the end when I went back to try installing the Flash again it went off without a hitch. I did the same with the other two computers and all is well I'm happy to say! Thanks for getting back to me though. I appreciate it.
Cj
Sent from my iPad

Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything.

Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything. Any work around to fix this?

See this lnk for a fix, it worked for me!
http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

Excel Viewer: Class not registered (error -2147221164)

Hello,
I am using the Excel examples shipped with Labview 8.21 to read from an Excel file and this works well. Now I need to do the same but on a PC that does not have Microsoft Office or Excel installed but only the free XLVIEWER (Microsoft Office Excel Viewer). When I try to change the ActiveX class of my reference to feed the 'Automation Open' vi I get the Class not registered (error -2147221164) although I can browse down to the XLVIEWER.exe and select it. Then I thought that maybe XLVIEWER had no ActiveX to communicate with other application; I thus installed a package called excelocx.exe, rebooted the PC but that did not change anything. I am still stuck with the same error.
What am I doing wrong?
Thanks a lot,
Christophe

Please find attached the VI I am using together with the XLS file that I try to read with Labview on a Pc that does not have MS Excel installed, only the XLVIEWER.
OpenOffice is not supported in our company so cannot be considered as a valid solution.
Thanks,
Christophe
Attachments:
Read Excel File with Labview 820.zip ‏31 KB

Class Not Registered error upon using MS Office Report

Hello,
Using LabVIEW 2010, I've just installed the Microsoft RGT trial from NI, along with the Office 2010 trial from Microsoft. Upon trying to drag the MS Office Report VI to my block diagram, the configuration dialog appears but immediately an error dialog shows up over top, with a Class Not Registered error. Attached is the screenshot. If I close the error and try to configure the VI for a basic Excel report, I get a file-not-found error in reference to the Excel template, which I have verified is indeed at the target path and opens with my version of Excel just fine. Any ideas how to get past this error?
Attachments:
error.JPG ‏42 KB

Hello,
It sounds like you have to reinstall the RGT. Have a look at this documentation.
http://digital.ni.com/public.nsf/allkb/B7F980D169474D568625760E0055D55E
Eric
Eric Liauw
AE Specialist - Automated Test | CLD | CTD
National Instruments

Failure: "image.cpp", error 11602

I'm developing an application in LabView and with the Web publishing tool I can visualizethe results in Internet. The problem is that I open the explorer (Netscape or Internet Explorer) the following message appears in the screen: "Failure, "image.cpp", error 11602, please contact with NI" and the explorer is close... It's labview 6.1

eddie wrote:
>
> I'm developing an application in LabView and with the Web publishing
> tool I can visualizethe results in Internet. The problem is that I
> open the explorer (Netscape or Internet Explorer) the following
> message appears in the screen: "Failure, "image.cpp", error 11602,
> please contact with NI" and the explorer is close... It's labview 6.1
A good general starting point is www.ni.com/failure . Worth looking at
the specific tips (if any) for this error, and the general tips.
Mark

Web Server 6.1 Error failure ( 967): HTTP3068: Error receiving request

Hi I have install Sun web server 6.1 on my T2000 system with solaris 10, the web server run the Siebel CRM application, but it is tooooo slow to bring the first page. Takes about 6.07 sec to bring the login page. The log files of the web server gives me a lot of +"failure ( 967): HTTP3068: Error receiving request"+.
Please I need you help

Hello Dear Friend Urgent Programmer
I'am Alfonso Franco member of Sun Developer
that is requested your questions Look:
1 - Please check out your System is ready to download this iPlanet Web Server 6.1
2- Suppose that you System is ready needs to
configure your setup add/remove program in
you computer that matches with the Web Server
3- if continue the problem error after this
analize very fine the problem and for end
we going to create the exact library and
port in it's Servers with a Java Program Database .
well my friend expect that thoses advice may serve something to solve this
problem for more contact to [email protected] to follow helping sincerely as "Good Programmer "

HTTP GET Failure 500 = Server Error

Can HTTP GET all kinds of files from a SunOne server, ascii and binary, large and small, but always get failure 500 = Server Error when attempting to HTTP GET an EXE file. Absolutely positively can download binary image files (C4) that are significantly larger than some EXE files, so size is not the issue. What might trigger this error? Thanks.

Hi,
Pls don't forget to reward points and close the question if you find the answers useful.
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

Register Error on eprinter screen

Ive been having numerous problems with my eprinter
First off, I cant register it online in the eprint center. I get an invalid code error every time I try to register it. It tells me that I either already registered the unit or that someone else has registered the unit
I have reset the web services 5 times and also even restored the factory defaults under the tools menu and it still doesnt work
When going out to retrieve the email after resetting the web services now gives me a "Register Error, Please upgrade product" message on the eprinter screen.
Then when I try to register the new email it says "Could not add printer" Java.lang.NULLPointerException error on the eprint center site after entering the new eprint code
Ideas? Help please?
This question was solved.
View Solution.

May I know which printer and web browser you're using to access the eprintcenter.com website?
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Status : Failure -I/O Error: DB server closed connection.

I am trying to use SQL Developer to migrate several SQL server database's into Oracle. Some of them are hosted in a SQL Server 2000 instance and the rest are on SQL Server 2005. I am able to connect to the SQL Server 2000 databases without issue, but not the 2005 databases. I have followed every step in several different forum posts all to no avail. Why is SQL Developer fine with the 2000 instances, but flatly refuses to connect to the 2005's? I have zero problems connecting to the databases using TOAD or Management studio.
1. I am having this same issue with SQL Developer versions 2.11, 3.1.0.7 and also 4.0.3.16
2. TC/IP is enabled
2. I am using the 1.2 jar file
3. I have put the SSO folder in my PATH
4. I have copied the ntlmauth.dll file to every bin directory I can find
5. I've also copied the JtdsXA.dll to every bin directory I can find.
6. I know exactly what my port numbers are, and they are NOT 1433.
7. I have tried every combination of connection name, and port with and without database and instance name added.
8. I have a valid account and password set up using SQL Server authentication, and I also have a valid account using windows authentication that have both been verified by using TOAD and Management Studio.
9. I am also receiving the following error trying to use windows authentication through SQL Developer and have followed all instructions I could find to fix it to no avail: Status : Failure -I/O Error: SSO Failed: Native SSPI library not loaded. Check the java.library.path system property.

Did you check the Help?
Before You Start Migrating: General Information
You may need to perform certain tasks before you start migrating a third-party database to an Oracle database. See the following for more information:
See also any information specific to the source database that you will be migrating, as explained in Before You Start Migrating: Source-Specific Information.
Note: SQL Developer does not migrate grant information from the source database. The Oracle DBA must adjust (as appropriate) user, login, and grant specifications after the migration.
Note: Oracle recommends that you make a complete backup of the source database before starting the migration. For more information about backing up the source database, see the documentation for that type of database.
If possible, begin the migration using a development or test environment, not a production database.
Creating a Database User for the Migration Repository
SQL Developer requires a migration repository to migrate a third-party database to an Oracle database. To use an Oracle database for the migration repository, you must have access to that database using a database user account. Oracle recommends that you use a specific user account for migrations, For example, you may want to create a user named MIGRATIONS, create a database connection to that user, and use that connection for the migration repository; and if you wish, you can later delete the MIGRATIONS user to remove all traces of the migration from the database.
When you create a user for migrations, specify the tablespace information as in the following example, instead of using the defaults for tablespaces:
CREATE USER migrations IDENTIFIED BY <password>
DEFAULT TABLESPACE users TEMPORARY TABLESPACE temp,
Do not use a standard account (for example, SYSTEM) for migration.
When SQL Developer creates a migration repository, it creates many schema objects that are intended only for its own use. For example, it creates tables, views, indexes, packages, and triggers, many with names starting with MD_ and MIGR. You should not directly modify these objects or any data stored in them.
Requirements for Creating the Destination Oracle Objects
The user associated with the Oracle database connection used to perform the migration (that is, to run the script containing the generated DDL statements) must have the following roles and privileges:
Note: You must grant these privileges directly to a user account. Granting the privileges to a role, which is subsequently granted to a user account, does not suffice. You cannot migrate a database as the user SYS.
Roles
CONNECT WITH ADMIN OPTION
RESOURCE WITH ADMIN OPTION
Privileges
ALTER ANY ROLE
ALTER ANY SEQUENCE
ALTER ANY TABLE
ALTER TABLESPACE
ALTER ANY TRIGGER
COMMENT ANY TABLE
CREATE ANY SEQUENCE
CREATE ANY TABLE
CREATE ANY TRIGGER
CREATE VIEW WITH ADMIN OPTION
CREATE MATERIALIZED VIEW WITH ADMIN OPTION
CREATE PUBLIC SYNONYM WITH ADMIN OPTION
CREATE ROLE
CREATE USER
DROP ANY SEQUENCE
DROP ANY TABLE
DROP ANY TRIGGER
DROP USER
DROP ANY ROLE
GRANT ANY ROLE
INSERT ANY TABLE
SELECT ANY TABLE
UPDATE ANY TABLE
For example, you can create a user called migrations with the minimum required privileges required to migrate a database by using the following commands:
CREATE USER migrations IDENTIFIED BY password
DEFAULT TABLESPACE users TEMPORARY TABLESPACE temp;
GRANT CONNECT, RESOURCE, CREATE VIEW, CREATE MATERIALIZED VIEW,
CREATE PUBLIC SYNONYM TO migrations WITH ADMIN OPTION;
GRANT ALTER ANY ROLE, ALTER ANY SEQUENCE, ALTER ANY TABLE, ALTER TABLESPACE,
ALTER ANY TRIGGER, COMMENT ANY TABLE, CREATE ANY SEQUENCE, CREATE ANY TABLE,
CREATE ANY TRIGGER, CREATE ROLE, CREATE TABLESPACE, CREATE USER, DROP ANY
SEQUENCE, DROP ANY TABLE, DROP ANY TRIGGER, DROP TABLESPACE, DROP USER, DROP ANY
ROLE, GRANT ANY ROLE, INSERT ANY TABLE, SELECT ANY TABLE, UPDATE ANY TABLE TO
migrations;
After you have created the converted model and done first DDL generation done for the new database, it will be clear from the scripts which privileges will be required for your situation.

I am having trouble installing Flash Player 13/register error.

I am having trouble installing Flash Player 13; after everything downloads, I get the error message, "The ActiveX control for Flash Player could not be registered"; "Error: Failed to resiter. I have Windows XP and Internet Explorer 8. Please help; what can I do to get this installed properly?

Use the MSI installer: http://download.macromedia.com/get/flashplayer/current/licensing/win/install_flash_player_ 13_active_x.msi

Library not registered error in Visual Studio 2013.

Whenever I attempt to build a solution, build multiple projects, or even run a program (with debugging) in visual studio 2013, I receive the error below.
"Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED))"
I have attempted to fix this by repairing my Visual Studio installation, but without success.
I believe the issue to be with Visual Studio itself, though, because this happens with every solution I have tried it with.
Any assistance in resolving this issue would be most appreciated.

Hi ndowney,
Based on your issue, could you please tell me if you install some other tools on your machine before you get the ""Library not registered" error?
(1) If yes, please you disable or un-install these tools and then build solution/project check this issue again.
(2)If no, to check if the issue is related to the VS IDE, please refer the following steps to check this error message.
(2.1) I suggest you could try the following commands to check if it is helpful.
a. Run devenv /Safemode to see if you can apply it correctly. This can eliminate the possibility that third party Add-ins or packages are causing problems.
b. Run devenv /Resetsettings to eliminate the cause of corrupted settings.
c. Run devenv /ResetSkipPkgs in Command Prompt.
If above still cannot work, try use this command again: devenv /resetsuerdata
(2.2) If the above suggestion still could not help you, maybe you will need to re-install the VS2013 and then check this issue again.
If you have any latest message about your issue, please tell me.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Getting Class not registered error when I run wmi queries

Getting Class not registered error when I run win32 wmi queries. Eg:

Specs:
Lenovo 3000 N100
Windows Vista Home Premium
Genuine Intel (R) CPU T2080 @ 1.73 GHz (2 CPUs)
1014 MB RAM
DirectX 10
Intel(R) GMA 950

Class Not Registered : Error -2147221164

Let's see if anyone can solve this one :
I have a *.tlb file, and I'm using the "Automation Open" vi to open the file so that I can invoke methods on it.
This vi is giving me the following error "Class Not Registered : Error -2147221164". This is only happening on one of my computers.
Can anyone shed any light on this one?
Thanks, Gene

I am assuming from your response then that you have tried to use regtlib anyways. All I can find on the error says to register it again. Maybe try to un-register it and then re-register it. Here is a Knowledgebase that talks about the methods to register it.
How Do I Manually Register Type Libraries, ActiveX Controls, and ActiveX Servers?
One thing is to make sure you are logged in as an administrator. Also what version of LabVIEW and are you running this as a VI or an exe?

Failure to Register Error

Similar Messages

Maybe you are looking for