Failure to register

I installed the Jabber for TelePresence and have tried to register the product, and it failed.
I changed my password thinking I type it wrong, but still no joy. Is there something wrong with the system as it has happened before as well?

Hi 1ntrahealth and grazyna.sobiesk...,
If you can login to your account from a different machine or device, then that means something on your specific machine is blocking the login. If you are using Windows, you may need to reset your Windows Firewall to default, close the Jabber Video software and open it, then try logging in. If that still does not help, then it's possible something else is conflicting with the service altogether like your company VPN or firewall. The ports needed for login are 80 and 443. If those are being blocked for this specific service then you won't be able to login.
Regards,
Jason

Similar Messages

Windows XP-Why do I get a message saying Error: Failure to Register?

I have tried and tried to install the latest version of flash player, it will say downloading all the way up to 100%. Then it will give me an error message saying Error: Failed to Register. I have went through all the trouble shooting steps on the adobe site, but I still get the message. I think it is installing because I uninstalled the previous version but I will go to add/remove programs and it shows it there, but even though it's installed it will not work because of the failure to register. Does anyone know why it does this or what I can do to get it registered? Any help would be greatly appreciated.

======== M/10.1.51.95 2010/02/25 21:23:05.888 ========
0000 00000010 "C:\DOCUME1\ROSEWI1\LOCALS~1\Temp\Temporary Internet Files\Content.IE5\TQ0KJ8BC\flashplayer10_1_p3_uninstaller_022310[1].exe"
0001 00001018
0002 00001019
0003 00001021
0004 00001018
0005 00001019
0006 00001020
0007 00001021
Above is what it showed. Is that what you needed? When I try to download flashplayer I hit the download button on the first page, it seems like they wouldn't have something there that's not yet ready to be downloaded,but I'm sure you can tell I don't know alot about this. It's just really aggravating when I'm trying to look at something and it says that I need the latest version of flashplayer and it says get it here. So I click on that icon and when I try to install it I get that message. I'm about ready to pull my hair out. LOL
mvargas1 <[email protected]> wrote:
Hi Rose411,
This sentence "When I tried to download the latest version the instructions said to remove all prior versions from the computer and I did that so I'm really not sure." tells me you are trying to download/install the Flash Player 10.1 beta version of the player, from labs.adobe.com, which is still in development. Unless you have some compelling reason to install the beta version (for testing purposes, etc), you should install the released Flash Player 10 from get.adobe.com/flashplayer.
However, to fix the 'failure to register' error and enable you to install the release version of the Player, please do the following:
1. Download the FP 10.1 beta uninstaller from http://download.macromedia.com/pub/labs/flashplayer10/flashplayer10_1_p3_uninstaller_02231 0.exe and save it to your desktop (this uninstall file is posted at http://labs.adobe.com/downloads/flashplayer10.html).
2. Launch the cmd-window
2a. in XP, click Start > Run and type: cmd, then click OK
3. In the command window, change directories to the location where you saved the file in step 1. For example, if you saved it to the desktop, at the prompt type: cd Desktop.
4. Be sure you have ALL browser windows closed, including any application that may use the Flash Player ActiveX control (i.e. Yahoo Instant Messenger, etc). This will ensure that the player is properly removed.
5. After changing directories, type: flashplayer10_1_p3_uninstaller_022310.exe -force
6. The uninstaller will launch. Follow the prompts to uninstall.
After you run the uninstaller, launch Windows Explorer and navigate to C:\Windows\System32\Macromed\Flash and post back here what files, if any, are listed in the directory.
Thank you.
-m
>

How to identify and delete objects after failure of registering XML schema

Hi,
I have tried to register a XML schema with many global elements but failed.
I have checked the view DBA_XML_SCHEMA and found that there is an entry for this failed XML schema and the disk spaces would not be freed after the failure of registration as well.
I have tried DBMS_XMLSCHEMA.deleteSchema() with DELETE_CASCADE_FORCE but failed with ORA-31000: Resource is not XDB document.
How can I identify and delete the objects for this failed XML schema and free up the disk space ?
I would not prefer to use 'DROP USER ... CASCADE' since there are other objects owned by this user.
Thanks in advance.

you can get them from user_objects.
but you have to identify them manuallly if your schema has other objects other then created by the xml schema creation process.
Note these objects will be cases senistitive. so you should enclose them with double quotes during deletion.

Failure to register with Shared Services

Planning 9.3.1 At Time = 0, we had created groups in Shared Services that were provisioned to our planning app. We could see the groups and corresponding uses come through into planning. Now at Time = 1, we notice that in Shared Services our planning app does not appear in the Planning projects folder. In Application Settings, the Shared Services URL still shows up in the Shares Services URL field, but attempting to Register with Shared Services yields the msg "Unable to Register with Shared Services".
Note, between T=0 and T= 1, we did not do any migration or configuration changes that I'm aware of.
Any thoughts on how to fix?
Thanks

I solved the problem myself. I had to unregister with Shared Services, then reregister, and then the app reappeared in the Planning projects in Shared Services. Not sure why the app go confused with Shared Services in the first place.

Failure to registered in blackberry network

Hi,
I have a Q10 SQN-3 and use Korean KT 3G network with data plan.
Today i restore the device system with blackberry link. Now the device OS is 10.2.0.1767.
Here is how i try to register to blackberry network for BIS and BBM:
Setting -> About -> three dots (right below) -> register blackberry
Now the problem came like this:
When i insert sim card
3G open, Wifi close -> can't register
3G close, Wifi open -> can't register
3G open, Wifi open -> can't register
When i take out the sim card
Wifi open -> can't register
Wifi open, VPN open (USA IP address) -> CAN register and BBM working
Could you tell me how this happen and how to solve?
I want to use bb service under 3G and wifi. Without register in the blackberry network, i can''t use.
Thanks!
Solved!
Go to Solution.

Billy_Zheng wrote:
But it can't explain why i ture off cellular data and just open wifi, it can not still use register to blackberry and use BBM.
Likely because you don't have the correct data plan provisioned to your account.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Failure to Register Error

I have tried to install Flash Player 8 ActiveX and received
the following message during installation:
Error 1904.Module
C:\Windows\system32\macromed\flash\flash8.ocx failed to
register. HRESULT -2147220473.
How can resolve this problem with installation?
Thanks.

I have tried to install Flash Player 8 ActiveX and received
the following message during installation:
Error 1904.Module
C:\Windows\system32\macromed\flash\flash8.ocx failed to
register. HRESULT -2147220473.
How can resolve this problem with installation?
Thanks.

Failure to register Adobe Photoshop in myAdobe account. Error message states enter a valid Serial Number

Hi,
I have a licensed copy of Adobe Photoshop CS6 Extended, it is okay when I enter the serial number in the application but when I try to register it online with it comes up with an error message "enter a valid serial number"?

Hi Ashutosh,
I am talking about registering the product in MyAdobe not the application. The application accepts the serial number, however, online registration is not accepted. The myAdobe ID is [email protected] and the serial number is [serial number removed]. I have 2 adobe IDs how can I transfer the applications from one ID to my preferred ID and have the [email protected] ID removed? Sorry for the two questions.
[Mod note - serial number removed.]

Hpconnected failure to register

When it try to create an account in HPconnected my e-mail address is rejected because it already exists - I used it for logging in to this forum I have no registered for hp connected before. My printer is an HP Photosmart 7520. It is very frustrating.
plain_bob

Hi plain_bob,
Welcome to the HP Support Forums. I understand that you are getting an error message when you try to create an HP Connected account.
You may be getting this message because you created an HP ePrintCenter account or you have a Snapfish by HP account. Did you get a message about Snapfish? If you don’t remember or are unaware of when the account was created you can always contact Snapfish to have the account deleted. I have included the link for contacting Snapfish Customer Support.
If I have misunderstood, would you please let me know the complete error message that you are receiving when you try to create your account on HP Connected? Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

RMAN: Unable to register database

Hi all,
I have just renamed the db_name, dbid and SID of a database using the DBNEWID Utility.
When I satrt up the database, it seems to start without any errors.
I need to take a backup of this database using RMAN.
But when I try to register the database, I get an error -
RMAN> register database;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of register command at 06/22/2009 15:26:39
RMAN-03014: implicit resync of recovery catalog failed
RMAN-03009: failure of full resync command on default channel at 06/22/2009 15:26:39
ORA-01587: error during control file backup file copy
ORA-27091: unable to queue I/O
ORA-27072: File I/O error
Linux Error: 2: No such file or directory
Additional information: 4
Additional information: 323
Additional information: 1036288
Could anyone please help me resolve this problem?

How do I find out, what path exact path is it trying to access?
When I do a SHOW ALL, all that RMAN does is show the error again.
This is what I get -
RMAN> SHOW ALL;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of show command at 06/23/2009 08:16:28
RMAN-03014: implicit resync of recovery catalog failed
RMAN-03009: failure of full resync command on default channel at 06/23/2009 08:16:28
ORA-01587: error during control file backup file copy
ORA-27091: unable to queue I/O
ORA-27072: File I/O error
Linux Error: 2: No such file or directory
Additional information: 4
Additional information: 323
Additional information: 602112
Edited by: user10882764 on Jun 23, 2009 5:21 AM
Edited by: user10882764 on Jun 23, 2009 5:22 AM

Trying to register 10.2.0.3 db in Rec Catalog using OEM, getting errors

Hi all,
I didn't know whether to post this here in the RMAN forum or in the OEM Grid Control forum, but the issue is more related to RMAN, so I'll post it here, and hope someone can help me out!
I have a new 10.2.0.3 database that I am getting configured to manage using OEM Grid Control. Through the OEM interface, I am trying to register this database with my recovery catalog - the recovery catalog is version 10.02.00.02. When I try to register this new db with the recovery catalog, I am getting this lengthy collection of errors:
Recovery Manager: Release 10.2.0.3.0 - Production on Wed Jan 30 14:58:36 2008 Copyright (c) 1982, 2005, Oracle. All rights reserved. RMAN> connected to target database: INSIGHT (DBID=4016731035) RMAN> connected to recovery catalog database PL/SQL package RMAN.DBMS_RCVCAT version 10.02.00.02 in RCVCAT database is not current PL/SQL package RMAN.DBMS_RCVMAN version 10.02.00.02 in RCVCAT database is not current RMAN> echo set on RMAN> register database; RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of register command at 01/30/2008 14:58:40 RMAN-06004: ORACLE error from recovery catalog database: ORA-06550: line 1, column 2453: PLS-00302: component 'RESTORECMD_T' must be declared ORA-06550: line 1, column 2424: PL/SQL: Statement ignored RMAN> exit; Recovery Manager complete.
It sounds like it has something to do with the fact that my recovery catalog database is not at a current version?? In the OEM tool, I went to the page that lists the Recovery Catalog, and tried hitting the Update button, and it succeeded, but the Recovery Catalog version did not change, it is still at 10.02.00.02.
Can anyone give me some assistance on this one?
Thanks!
--Brad

Hi,
please check with
select comp_name,status,version from dba_registry;
COMP_NAME
STATUS VERSION
Oracle Database Catalog Views
VALID 10.2.0.3.0
Oracle Database Packages and Types
UPGRADED 10.2.0.3.0
The UPGRADED status is not good. Run utlrp.sql again and then again as rman user the "upgrade catalog". Now it should work fine.
Bye
Matthias

I need a Microsoft document that says "sqlservr.exe" can register setspn (Service Principal Name)

On all of my SQL Server instances, I can find SQL server error logs that have the same 3 entries below, so while I already know it can, I need a Microsoft document that says "sqlservr.exe" can so I can convince the network guys to grant the service
account for SQL "Write servicePrincipalName: Allow" in AD.
63 2014-06-26 20:24:02.980 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/DFW-MSSQLDW.PathologyPartners.intranet:1433
] for the SQL Server service. Windows return code: 0x2098, state: 20. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication
is required by authentication policies and if the SPN has not been manually registered.
61 2014-06-26 20:24:02.970 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/DFW-MSSQLDW.PathologyPartners.intranet:DW
] for the SQL Server service. Windows return code: 0x2098, state: 20. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication
is required by authentication policies and if the SPN has not been manually registered.
38 2014-06-26 20:24:02.840 Server SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not
be possible until a SPN is registered for the SQL Server service. This is an informational message. No user action is required.
Duane Lawrence

Refer the below article
http://blogs.msdn.com/b/psssql/archive/2010/03/09/what-spn-do-i-use-and-how-does-it-get-there.aspx
Automatic SPN Registration
When an instance of the SQL Server Database Engine starts, SQL Server tries to register the SPN for the SQL Server service. When the instance is stopped, SQL Server tries to unregister the SPN. For a TCP/IP connection the SPN is registered in the format MSSQLSvc/<FQDN>:<tcpport>.Both
named instances and the default instance are registered as MSSQLSvc, relying on the <tcpport> value to differentiate the instances.
--Prashanth

Unable to register database in catalog into emrep

Hello guys,
I have a RMAN catalog in one server that works fine, now I tried to move this catalog to the emrep database (In this database I have the Grid Control), as I can´t use export / import because the original database is 10.1.0.5 and the emrep database is 10.1.0.4, I have created a new catalog into the emrep database.
The problem appear when I try to register one database on it:
RMAN> register database;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of register command on default channel at 09/15/2009 12:10:43
RMAN-10015: error compiling PL/SQL program
RMAN-10033: error during compilation of job step 1: ORA-01041: internal error. hostdef extension doesn't exist
ORA-04029: error ORA-3113 occurred when querying ORA_KGLR7_DEPENDENCIES
So, my first question is: Is possible create a RMAN catalog in the same database of Grid Control?
If this is possible, any suggestions that can help me to resolve this errors?
Thanks.

Hello Damorgan, thanks for your answer.
I follow the steps in a remote database ( BEEVODES ) which I want register into catalog ( tstsuse11-emrep ):
oracle@srvdb01 ~]$ echo $ORACLE_BASE
*/u01/app/oracle*
oracle@srvdb01 ~]$ echo $ORACLE_HOME
*/u01/app/oracle/product/10.1.0/db_1*
oracle@srvdb01 ~]$ export ORACLE_SID=BEEVODES
oracle@srvdb01 ~]$ rman target / catalog rman@tstsuse11-emrep
Recovery Manager: Release 10.1.0.5.0 - 64bit Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
connected to target database: BEEVODES (DBID=822996874)
recovery catalog database Password:
connected to recovery catalog database
RMAN> register database;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of register command on default channel at 09/16/2009 12:12:49
RMAN-10015: error compiling PL/SQL program
RMAN-10033: error during compilation of job step 1: ORA-01041: internal error. hostdef extension doesn't exist
ORA-04029: error ORA-3113 occurred when querying ORA_KGLR7_DEPENDENCIES
But I continue with the same error.
I supose the instalation of emrep is ok, because the Grid Control ( installed there ) works fine.
Thanks again.

"Failed to Register" Error on XP with SP3

Hi...I hope somebody can shed some light on this problem since it has become such a frustrating issue which I have researched for over a week now with no clear answer as to how to fix it!
It all started when I tried to update my Flash Player about a week ago. I have (Dell) Window's XP with SP3 and IE 8. At first I did NOT uninstall my old version of Flash Player as I thought the new one was just an update and would write over the old one. So when the new one downloaded and seemed to be doing good until about halfway through the install when it threw out an error of "Failed to Register" I just figured that maybe I did need to uninstall the old one first after all. So I uninstalled and then rebooted and did another installation, which turned out the same result -- Failure to register. I have tried various things suggested here and also by others on the Internet with no luck at all. However, I did not monkey around with the registry, I am too nervous of that sort of thing and read over and over again that those that did try that route did not have any success anyway.
Also, I want to make it clear that I am signed on as the administrator of my PC. I can make changes and have in the past so it is not that at all. I do not understand why this problem is persisting and although so many folks are having trouble with it Adobe has not found a solution that will work reliably for us.
One other note...I have also tried to update Flash Player on two other machines we have here at our house.... both of those also gave me the exact same error, the failure to register message. One of those machines is a Dell that is running Window 7 with IE 8 and the third machine is an Asus laptop running XP with IE 7 or 8...I'm not sure which and I don't have it here at the moment to check. But as you can see, with three different machines throwing up the same error message it is not just an isolated incident with my main PC. It seems to be a universal problem.
Has anyone had any luck since the last posts here where folks complained of the same thing? It's so frustrating since I rely on my main PC and can't do many of the things I used to without Flash Player available to me. I only use IE or AOL to browse the Internet. Any suggestions?

Chris,
I'm sorry I have not checked the message board but I have been pretty sick...however, I wanted to say that I did finally get Flash to install. At first, I was totally against downloading the Microsoft fix that goes into the registry to remove register keys that might have been left behind so I kept that for the very last option and only if everything else failed. Everything failed. So I downloaded the two items needed to do the job. The one item had to be unpacked and put into the same folder as the other (sorry, I can't recall what they were called and I am using my iPad and not on the PC where I have the info...) and then you click on the installer which starts the registry fix. It took several minutes (while I sweated bullets!...not real crazy about messing with the registry!) but in the end when I went back to try installing the Flash again it went off without a hitch. I did the same with the other two computers and all is well I'm happy to say! Thanks for getting back to me though. I appreciate it.
Cj
Sent from my iPad

Failure while extending weblogic server domain.

Hello
We are facing failure for registering/extending OID, OVD and OHS instances with the WebLogic Server Domain(10.3.5.0) on Windows. Weblogic domain server and URL(http://hostname:7001/console) is up and running; however we are not able to Telnet 7001 port or access Weblogic domain URL from OID/OVD/OHS server.
Please note OID, OVD/OHS/Admin server are hosted on three different m/c.
Web Logic Server Domain: 10.3.5.0
OID, OVD, OHS: 11.1.1.5
OS: windows server 2008 32 bit
While extending we are getting error:
INST-07242: Unable to Connect to Oracle Weblogic Middleware Admin Server
While registering using below opmnctl command getting error:
Command Used:
C:\Oracle\admin\oid_inst1\bin>opmnctl registerinstance -adminHost hostname -adminPort 7001 -adminUsername weblogic
Command requires login to weblogic admin server (hostname):
Username: weblogic
Password:
Command failed: Unable to connect to the admin server. Verify it has been start
ed and is accessible.
Details are logged in C:\Oracle\admin\oid_inst1\diagnostics\logs\OPMN\opmn\provi
sion.log
opmnctl registerinstance: failed.
Error: Refer attached log file for more details.
Caused by: javax.naming.NamingException: Couldn't connect to the specified host [Root exception is org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 203 completed: No]
at weblogic.corba.j2ee.naming.Utils.wrapNamingException(Utils.java:83)
at weblogic.corba.j2ee.naming.ORBHelper.getORBReferenceWithRetry(ORBHelper.java:656)
at weblogic.corba.j2ee.naming.ORBHelper.getORBReference(ORBHelper.java:594)
at weblogic.corba.j2ee.naming.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:85)
at weblogic.corba.j2ee.naming.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:31)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:46)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:178)
... 9 more
Caused by: org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 203 completed: No
at com.sun.corba.se.impl.logging.ORBUtilSystemException.writeErrorSend(ORBUtilSystemException.java:2259)
at com.sun.corba.se.impl.logging.ORBUtilSystemException.writeErrorSend(ORBUtilSystemException.java:2281)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.writeLock(SocketOrChannelConnectionImpl.java:957)
at com.sun.corba.se.impl.encoding.BufferManagerWriteGrow.sendMessage(BufferManagerWriteGrow.java:53)
at com.sun.corba.se.impl.encoding.CDROutputObject.finishSendingMessage(CDROutputObject.java:144)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.finishSendingRequest(CorbaMessageMediatorImpl.java:247)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete1(CorbaClientRequestDispatcherImpl.java:355)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete(CorbaClientRequestDispatcherImpl.java:336)
at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.invoke(CorbaClientDelegateImpl.java:129)
at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.non_existent(CorbaClientDelegateImpl.java:232)
at org.omg.CORBA.portable.ObjectImpl._non_existent(ObjectImpl.java:137)
at weblogic.corba.j2ee.naming.ORBHel
Trouble shooting steps tried:
• Firewall Off on both the server
Edited by: 993281 on Mar 12, 2013 2:52 AM

Did you get an answer to this problem? The opmnctl registerinstance failed with exactly the same error. In my case I know I misspelled the domain name during the install dialog and now need to correct the name, but I can't find where the name is located to correct it or which tool to use or which file I should edit? I looked through the Weblogic admin console and EM admin console but with no luck. Do you or anyone else know how I can edit the name of the host so I can move forward with my installation? It seems like it would be simple to find and change. Thanks.

Register in catalog

Hi,
When i connect to the RMAN catalog database and do:
RMAN> report schema; --am getting..
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 03/04/2006 21:17:21
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20003: target database incarnation not found in recovery catalog
--But when i try to register database...
RMAN> REGISTER DATABASE;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of register command on default channel at 03/04/2006 21:13:32
RMAN-20002: target database already registered in recovery catalog
--can anyone tell me what the problem could be?

Perhaps this database is a copy of another. ie the dbids are the same.
please refer to Metalink note 1013368.102 for more information

Failure to register

Similar Messages

Maybe you are looking for