Failure to search - query window problem

Hello again,
Have anyone of you came across a problem with SAP search mechanism in query window attached to document field? I've created a simple query of "Select acctcode,acctname from OACT where acctcode like '2%' and postable='Y' order by acctcode" and attached it to one of document fields (doesn't matter which one). When I run this query a usual window poped up with a search field on the top, but when I typed "2" in it, selection bar moved right into first 231 account ignoring any of the lesser numbers. There is more - when I changed query to search for '5%' like accounts, I gained the same result - accounts less than 530 were ignored even if I typed "50" or "51". BUT - when I changed query sort order to "desc", all account became "findable".
I got this problem in one database only which is SAP 8.8 PL10 version upgraded recently from 2007A one. I've checked with a newly created 8.8 and such problem hasn't occured.

Hello Thomasz,
I might be off base here, what happens when you use this???
Do you get the same types of query window problem???
Select
acctcode,
acctname,
segment_0
from OACT
where Segment_0 like '2%'
order by acctcode
for browse
Regards,
Zal

Similar Messages

[iPhoto] Assertion failure/Modal window problem

I've been trying to order prints through iPhoto (6.0.6) but when I hit the "Order prints" button nothing happens. I get the following error in the Console log. It seems as though iPhoto is trying to spawn a new window (which makes sense) and can't.
I've reinstalled iPhoto, rebooted, etc. but keep getting same problem.
2007-10-08 22:07:27.616 iPhoto[589] * Assertion failure in -[ExtendedApplication _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:], AppKit.subproj/NSApplication.m:3057
2007-10-08 22:07:27.617 iPhoto[589] Modal session requires modal window

I found this discussion. I could not access the discussion link. Under the instructions, I didn't understand what "rm files and directories" means ... perhaps "remove"????
Help
"After a ran steps to fix the problem of Safari giving "localized string not found" messages, the "modal session requires modal window" problem went away.
Here is a link to the post.
http://discussions.info.apple.com/[email protected]
The instructions are to:
1. Download lastest version of Safari
2. rm files and directories in /System/Library/Frameworks/WebKit.frameworks
3. Install Safari again
4. Run permissions repair in Disk Utility"

I JUST UPGRADED TO OS X YOSEMITE. WHEN I TRY TO DO A SPOTLIGHT SEARCH ALL I GET IS A WINDOW TELLING ME ABOUT SPOTLIGHT SEARCH. THERE IS NO WAY TO INPUT A SEARCH QUERY.

I JUST UPGRADED TO OS X YOSEMITE. WHEN I TRY TO DO A SPOTLIGHT SEARCH, ALL I GET IS A WINDOW TELLING ME ABOUT SPOTLIGHT SEARCH. THERE IS NO WAY TO INPUT A SEARCH QUERY IN THIS WINDOW. ANY HELP RESOLVING THIS ISSUE WILL BE APPRECIATED.

There is no search box in the window.
Just type the search query after magnifying glass icon.

C ldap_search_ext_s search query problem

I have an application developed in C++ that uses the Novell C LDAP SDK.
If I use a search query to the ldap_search_ext_s function of the form
Code:
(&(objectClass=inetOrgPerson)(%s=%s))
it works when I substitute the first %s with 'cn' and the second with a
valid username.
If I modify the query to:
Code:
(&(|(objectClass=inetOrgPerson)(objectClass=aliasO bject))(%s=%s))
it no longer works. I want to find user objects and user alias objects
that match a username. I am substituting 'cn' and a valid username as
before.
This query works with the ldapsearch command from the OpenLDAP tools on
a Linux installation. According to page 39 of ldaplibc.pdf it should
work with this SDK as well. The example there is:
Code:
(&(objectClass=inetOrgPerson) (| (sn=Smith) (cn=Chris S*) ) )
To me that's the same format as my own search filter, albeit ordered
differently. I have tried using this query string and replacing the
parts to make it identical functionally to my query.
Each time I call ldap_search_ext_s it returns 4. The documentation says
a return code of 4 is 'LDAP_SIZELIMIT_EXCEEDED: Indicates that in a
search operation, the size limit specified by the client or the server
has been exceeded. Incomplete results are returned.'
This implies too many results are being returned, but I have checked
and the final query used in the function is:
Code:
(&(cn=user1) (| (objectClass=inetOrgPerson) (objectClass=aliasObject) ) )
Any idea what I'm doing wrong?
mattross
mattross's Profile: http://forums.novell.com/member.php?userid=30003
View this thread: http://forums.novell.com/showthread.php?t=394151

Oops I'm sorry to say I've already worked out what I was doing wrong! I
had a limit of 1 search result being returned by the function.
Previously when I was just looking for users by
objectClass=inetOrgPerson that was sufficient, but with aliases included
as well it was not.
Please disregard this thread.
mattross
mattross's Profile: http://forums.novell.com/member.php?userid=30003
View this thread: http://forums.novell.com/showthread.php?t=394151

Search Query component not responding and corrupted index error

I am getting follwing errors in eventviewer -
1.
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Server Search
Date:          17.12.2014 14:17:38
Event ID:      74
Task Category: Content Index Server
Level:         Error
Keywords:
User:          xxxxxxxx
Computer: xxxxxxxx
Description:
Component: 7f5d330e-b891-4fc0-af0b-60519d60251f-query-1
An index corruption of type pcomp14 was detected in catalog Portal_Content. Stack trace is
     tquery offset=0x0000000000034FAC (0x000007FEE2E84FAC)
     tquery offset=0x000000000001E2B1 (0x000007FEE2E6E2B1)
     tquery offset=0x0000000000131362 (0x000007FEE2F81362)
     tquery offset=0x000000000010AE9F (0x000007FEE2F5AE9F)
     tquery offset=0x000000000010D356 (0x000007FEE2F5D356)
     tquery offset=0x0000000000139598 (0x000007FEE2F89598)
     tquery offset=0x0000000000143689 (0x000007FEE2F93689)
     ntdll offset=0x00000000000215DB (0x00000000775E15DB)
2.
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Server Search
Date:          17.12.2014 13:07:47
Event ID:      60
Task Category: Query Processor
Level:         Error
Keywords:
User:          xxxxxxxxxx
Computer:      xxxxxxxxxx
Description:
The last query component (7f5d330e-b891-4fc0-af0b-60519d60251f-query-1) of a partition failed. It will not be taken out of rotation but queries are likely to fail. Check previous event logs to determine cause. Reinitialization may be necessary.
Please give some solution to resolve the issue.
NOTE: Please give solution other than rebuilding the whole search service application. We don't want to rebuild as it is shared with other farms and downtime will be more.

Hi Gaurav,
Please go to Central Administration->Manage services on server, stop and re-start SharePoint Server Search service and Search Query and Site Settings Service. Then open a Command Prompt window and type net stop osearch14 to stop the search service. Type
net start osearch14 to restart the search service.
If failure persists, add a new query component as a mirror in the same query group as the failed query component.
More information, please refer to the link:
http://technet.microsoft.com/en-us/library/ee513123(v=office.14).aspx
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Search Service Application problems after upgrading from Foundation to Enterprise edition of SharePoint 2013

Hi all. I have been searching for days for a solution to a problem I am having with SP2013 Enterprise edition.
We recently upgraded from SP2013 Foundation to SP2013 Enterprise. After the upgrade, the search services are no longer working and we are receiving many application log entries indicating the following:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Technical Support Details:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
as well as:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
I have tried to remove the search service application and recreate it, and even though the SharePoint Central Administration states that it was created successfully, I am still getting the same errors in the log. If I go to the Search Service Application
Search Administration page, the "System Status" shows the following message:
The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '0359af35-0982-4ede-8838-b1d390e915bf' in search application 'Search Service Application' is in a good state and
try again
Additionally, under the "Search Application Topology" section, it states "Unable to retrieve topology component health states. This may be because the admin component is not up and running" which I assume is normal if the admin is not
running.
Does anyone know how I can resolve this problem?
Thanks!

Hi Joaquin,
According to your description, the error occurred when you re-created the Search Service Application.
Based on the error message, I recommend to verify the things below:
   1. Check if the association between the Search Service Application proxy and the web application is configured.
Please go to Central Administration > Application Management > Configured service application associations > Click Default to see if the Search Service application is checked.
   2. Change the app pool for the Search Service Application to SharePoint Web Services Default in the properties of the Search Service Application.
Please go to Central Administration > Application Management > Manage service applications > Highlight the Search Service Application > Click Properties in the ribbon > Change
the two app pool to SharePoint Web Services Default: App Pool For Search Admin Web Service and Application Pool for Search Query and Site Settings Web Service.
    3. Run PS command to check if the search admin timer job is enabled: Get-SPTimerJob
job-application-server-admin-service | fl. If it is not enabled, use PS command to enabled it and then reset Internet Information Services: Enable-SPTimerJob job-application-server-admin-service.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error when querying a table through the Query Window

I am running a query on the following table in the ODT Query window - for some reason I get the error below when trying to retrieve the data - I can query the table just fine through SQL Plus - it errors out whether I use grid or text window
ERROR
Arithmetic operation resulted in an overflow.
CREATE TABLE "RF3_PROD_1"."F_EXTRACTMETRICS" ("EXTRACT_NAME" VARCHAR2(50) NOT NULL,"RUN_START_DATE" DATE NOT NULL,"RUN_END_DATE" DATE NOT NULL,"DURATION" NUMBER DEFAULT 0 NOT NULL,"EXTRACT_START_DATE" DATE NULL,"EXTRACT_END_DATE" DATE NULL,"NUM_RECS_ADDED" NUMBER DEFAULT 0 NOT NULL,"NUM_RECS_DELETED" NUMBER DEFAULT 0 NOT NULL,"STATUS" VARCHAR2(50) NOT NULL,"COMMENTS" VARCHAR2(500) NULL) TABLESPACE "EXTRACT_TAB_01_TS" PCTFREE 15 PCTUSED 75 INITRANS 1 MAXTRANS 255 STORAGE ( FREELISTS 1 FREELIST GROUPS 1 INITIAL 8388608 NEXT 516096 MAXEXTENTS 2147483645 MINEXTENTS 1 PCTINCREASE 0 )
I would have formatted it nicer - but that is the way that ODT created it :)

Christian,
I found that this happens when trying to query number fields that are reals with a large decimal value (26 decimal values and above seem to be the magic number). What is strange is that I don't get this problem when I retrieve data from the same table using the Retrieve data option (versus a query for all the data in the Query Window) so they don't seem to be utilizing the same basic code to grab and then display the data interestingly enough (I am sure you knew that). Does this allow you to replicate the issue?
Thanks,
Bryan

Need help in building search query

Guys ..
Problem Description:
I have a huge table that is indexed using CONTEXT.
I want to write a search query that considers the following:
1. number of keywords match
2. takes care of spelling mistakes, synonyms and acronyms
3. proximity - the keywords should not be too far of each other.
e.g. I have this phrase: "Horizontal Stabilizer Trim Brake"
I was thinking of writing a query like:
SELECT SCORE(1) SCORE,
TEXT text
FROM MY_TABLE
WHERE CONTAINS(TEXT, '(Horz | Horizontal) ACCUM (Stab | Stabilier) ACCUM Trim ACCUM (Brk | Break)', 1) >= 0
ORDER BY SCORE DESC
The results doesnt look satisfactory. I have not used "near" operator as i dont know how to use it.
Please help me as I am very much new to Oracle Text.
-G

Well, I'm not going to write the function for you, but we can at least talk through a general strategy.
A lot depends on how you help your users on the front end -- for example, if they're searching a technical document, you may want to return results that aren't perfect matches but you do want to make sure the user picks 'mandatory' and 'useful' keywords in a way that lets you figure out which ones are really important. On the other hand, if you're google and have to handle queries like 'horizontal stabilizer trim brake' and 'were Pete and Jenny in the break room' then you run the risk of spending too much time looking for interesting words, almost doing a full-text search on the query trying to derive meaning.
So I'm going to presume that you have some control over what/how the users generate their searches so that finding keywords isn't the issue.
The plan will be to parse the query a bit to find the interesting words, clean them up, and weigh their importance, then use transformed data to build the query template to score various combinations.
So here's some pseudocode for the function:
function parse_query(pQueryWords in clob) returns clob as
begin
 generate_token_list (); -- split the query into a set of individual tokens/words
 for each token in token_list
 if it's a mandatory word then accumtokenlist := accumtokenlist || ' ' || token ||'*10' -- weigh the presence of the token strongly
 if it's a useful word then accumtokenlist := accumtokenlist || ' ' || token ||'*5' -- domain-specific words are also important
 if it's a stopword or reserved word, then do not add it to the list
 if it's not on my lists, then accumtokenlist := accumtokenlist || ' ' || token
 and normaltokenlist := normaltokenlist ||' ' || token
 end;
 --so now, we have two lists, one for NEAR and one for ACCUM
 now build the guts of the template
 querytemplate := querytemplate || '<seq> || normaltokenlist || '</seq>';
 querytemplate := querytemplate || '<seq> || replace (accumtokenlist, ' ',' ACCUM ') || '</seq>';
 querytemplate := querytemplate || '<seq>$' || replace(normaltokenlist,' ','$') || '</seq>';
 querytemplate := querytemplate || '<seq>? || replace(replace(accumtokenlist,' ',' ?'),' ', ' accum ') || </seq>'; -- first fuzzy the words, then accum
 querytemplate := querytemplate || '<seq>? || replace(replace(normaltokenlist,' ',' ?'),' ', ' near ') || </seq>'; -- first fuzzy the words, then near
 return querytemplate
end;So, with a 'cooked' query text that is template-friendly, all we need to do is apply a template that is aware of your inputs:
query_Template_string := '
<query>
 <textquery lang="ENGLISH" grammar="CONTEXT"> horizontal stabilizer*5 trim brake*10
 <progression> '
|| parse_query('horizontal stabilizer trim brake') ||
' </progression>
 </textquery>
<score datatype="INTEGER" algorithm="COUNT"/>'
</query>So that's an example of one approach.

"Your server is not configured properly or your search query has ..."

Config info:
v490, 20k+users, JES 2005Q1,
118540-23
118207-42
115614-20
Brief Description:
When users select the Corporate Directory under the Address Book tab in CE and click the ALL button (or do a wildcard search) they get the following error:
"Your server is not configured properly or your search query has
exceeded the limit. Please check server configuration."
Additional info:
Additionally this error shows up when a user chooses a View: letter and clicks next for the following page, and additionally if they have the Corporate Directory set as their default address book in options.
Logs:
/sun1/dirserv/slapd-mail/logs/errors:
[11/Oct/2005:10:44:21 -0500] - WARNING<20805> - Backend Database - conn=161557 op=34 msgId=169 - search is not indexed
/sun1/dirserv/slapd-mail/logs/access:
[11/Oct/2005:10:23:21 -0500] conn=161557 op=17 msgId=124 - SRCH base="o=ualr.edu,dc=mail,dc=ualr,dc=edu" scope=2
filter="(&(&(cn=*)(|(objectClass=INETORGPERSON)(objectClass=GROUPOFUNIQUENAMES)))(objectClass=*))"
attrs="objectClass"
[11/Oct/2005:10:23:31 -0500] conn=161557 op=17 msgId=124 - RESULT err=0 tag=101 nentries=20540 etime=10 notes=U
/var/sun1/comexp/logs/uwc.log:
Oct 11, 2005 10:52:20 AM com.sun.uwc.abclient.ABInitFilter doFilter WARNING: Address Book session already set!!
changes in /var/sun1/comexp/WEB-INF/config/corp-dir/db_config.properties
lookthru_limit=30000
I have a ticket, just wondering if anyone else has this problem...

You'll be getting this in your case update (answer in response to the internal conversation we've been having about your issue)
So if they really want to control wildcard searches then they should look in the "personalstore.properties" file for the domain (default: /var/opt/SUNWuwc/WEB-INF/domain/personalstore.properties) for the value of "db.idir.wildcardsearch". Its possible settings are documented in the comments. If they wish to disable all "*" and "*x*" searches (i.e. turn off the 'All' and selecting a letter options) they should set the value to at least 2.

Why is does the search query box collapse in Acrobat CS4

In the last few weeks or so, when I try searching for text in a pdf document in Acrobat CS4 the usual search query box that is supposed to pop up is "collapsed" - see the attached diagram. (In css language it looks like a collpased dv tag) There is no place to enter text and a strange drop shadow effect emerges? Has anyone else experienced this problem? Have any suggestions about how to resolve it?
Thanks
John

OK I solved my own problem by removing the acrobat preference file and restarting Acrobat. I should have thought of a corrupt preference file before I asked
cheers
john

Spatial query performance problem after upgrade to 10G

I am in the process of converting my database from a 9i box to a new 10G 64-bit box. But I have found a problem which is causing some reports to be slower on the new box. I have simplified the queries down to having the user_sdo_geom_metadata table joined to use the diminfo in the queries (I know that I am not using them in these queries, but I simplified for testing purposes...)
If I run the following I get and look at the explain plan I get full table scans for both spatial tables and index lookups for the user_sdo_geom_metadata table queries and runs for about 14 seconds.
SELECT ROWNUM
from COUNTIES s,
NOMINATIONS O,
(select diminfo from user_sdo_geom_metadata where table_name='COUNTIES') S_DIM,
(select diminfo from user_sdo_geom_metadata where table_name='NOMINATIONS') O_DIM
where sdo_filter(S.GEOM,o.geom, 'querytype=WINDOW')='TRUE'
and sdo_geom.within_distance(o.geom,0,S.GEOM,.5)='TRUE';
If I just remove the two user_sdo_geom_metadata joins, I get spatial index usage on COUNTIES and the whole thing runs in less that a second.
SELECT ROWNUM
from COUNTIES s,
NOMINATIONS O
where sdo_filter(S.GEOM,o.geom, 'querytype=WINDOW')='TRUE'
and sdo_geom.within_distance(o.geom,0,S.GEOM,.5)='TRUE';
I have rebuilt the indexes, gathered stats, and tried hints to force the first query to use the spatial index. None of which made any change.
Has anyone else seen this?
Gerard Vidrine

Hi Gerard,
When the query window comes from a table Oracle always recommends:
1) Use the /*+ ordered */ hint
2) Put the table the quiery window comes from (geometry-2 in the query) first in the from clause
However, your query is also written very strange. Do you know about SDO_WITHIN_DISTANCE? Or are you trying to do SDO_ANYINTERACT (since the distance is 0)?
So I would write the query you have as:
SELECT s.ROWNUM
from NOMINATIONS O, COUNTIES s
where sdo_relate(S.GEOM,o.geom, 'querytype=WINDOW mask=anyinteract')='TRUE';
or in Oracle10g:
SELECT s.ROWNUM
from NOMINATIONS O, COUNTIES s
where sdo_anyinteract(S.GEOM,o.geom)='TRUE';

Search query not able to find node under a specific site structure (eg. 2013/05)?

Hi,
    We are saving our data on a node under year/month site structure, eg. (2013/05/node1) but when we search for the data using a query in a custom workflow., it does not fetch any results.The query being fired is something like :
   SELECT * FROM [nt:base] AS s WHERE ISDESCENDANTNODE([/content/hm/NewsroomSection/en/NewsRoom/NewsroomDetails/2013/05/node1]) .
   On trying to run this query directly in crxde, it shows no result. But when we change the site structure to 2013/5/node1, it is able to fetch results.
   I am not sure if the problem is because of the '0' digit in the month in site structure (2013/05).
   Please provide your input if any of you have come across something like this before ..
Thanks
Abhishek

Hi Abhishek,
In case of nodes with numbers, any node starting with 0, this 0 gets omitted in the search query.
So, if your node name is like 02013 for year, when it searches it omits 0 and searches for 2013.
In case you want to search for your node, your SQL2 query should be like below:
SELECT * FROM [nt:base] AS s WHERE ISDESCENDANTNODE(['/content/mysite/en/products/2013/05'])
See screenshot for reference. This should return you the results.
Hope this helps.
I guess for more reference on SQL2 queries, you can refer to JCR 2.0 spec.
http://www.day.com/specs/jcr/2.0/6_Query.html
Also, you might want to look at the railroad diagrams and some examples from Jackrabbit's test cases:
http://www.h2database.com/jcr/grammar.html
http://svn.apache.org/viewvc/jackrabbit/trunk/jackrabbit-spi-commons/src/test/resources/or g/apache/jackrabbit/spi/commons/query/sql2/test.sql2.txt?view=markup
Hope this helps.

What is a saved search query? And can I delete it?

I was making some back up disk and created a Saved Search Query. Can the file that's on my desktop be trash? What exactly is this, and what is it's purpose.
Greg

Hi Gregory, and a warm welcome to the forums!
It's an xml file with Aliases to a previous search criteria.
Selecting "Find..." from the Finder's "File" menu (or typing another user-configurable keyboard shortcut, command-option-space by default) brings up an "advanced" Spotlight search window that includes a field for a search string (treated like the same string typed into the Spotlight menu bar drop-down search field) and any number of additional search conditions.
Any search performed in this window can be saved as a "smart folder." This "folder" is actually nothing more than a plain file with a ".savedSearch" file name extension. The file contains an XML serialization of the Spotlight query.
http://arstechnica.com/apple/reviews/2005/04/macosx-10-4.ars/9
One way you can delete it by going to the Finder>File>Find, click on a Saved Search, click the little Minus icon...

String Search Query in any columns in any table in a database

Hi All,
I am trying to search a word which starts with 'FRA' in any columns and any tables.
I am unable tofind what is generating a join datasets in the webservice from teh database as it is not apparent within teh 100 tables.
I ahve looked into
Re: How to search in all rows and all columns?
Re: SQL Search Query - HELP!
but none of these queries is working out for me as I am a user with no tables on its own but rather a user quering other tables.I think its a tweak on which dat adisctionary I can view
select distinct substr (table_name, 1, 14) "Table",
substr (t.column_value.getstringval (), 1, 50) "Column/Value"
from all_cons_columns,
table
(xmlsequence
(dbms_xmlgen.getxmltype ('select ' || column_name
|| ' from ' || table_name
|| ' where upper('
|| column_name
|| ') like upper(''%' || 'fra'
|| '%'')'
).extract ('ROWSET/ROW/*')
) t
order by "Table";
running teh above query got me thsi error:
ORA-19202: Error occurred in XML processing
ORA-00942: table or view does not exist
ORA-06512: at "SYS.DBMS_XMLGEN", line 288
ORA-06512: at line 1
19202. 00000 - "Error occurred in XML processing%s"
*Cause: An error occurred when processing the XML function
*Action: Check the given error message and fix the appropriate problem
Any help is much appreciated
Edited by: CrackerJack on Sep 3, 2012 5:55 PM
Edited by: CrackerJack on Sep 3, 2012 5:55 PM

Hi,
CrackerJack wrote:
Hi All,
I am trying to search a word which starts with 'FRA' in any columns and any tables.
I am unable tofind what is generating a join datasets in the webservice from teh database as it is not apparent within teh 100 tables.
I ahve looked into
Re: How to search in all rows and all columns?
Re: SQL Search Query - HELP!
but none of these queries is working out for me as I am a user with no tables on its own but rather a user quering other tables.I think its a tweak on which dat adisctionary I can view In all_cons_columns, "cons" stands for "constraints". That view only includes columns that have a constraint on them.
Use all_tab_columns if you're interested in all columns in all tables.
select distinct substr (table_name, 1, 14) "Table",
substr (t.column_value.getstringval (), 1, 50) "Column/Value"
from all_cons_columns,
table
(xmlsequence
(dbms_xmlgen.getxmltype ('select ' || column_name
|| ' from ' || table_name
|| ' where upper('
|| column_name
|| ') like upper(''%' || 'fra'
|| '%'')'
).extract ('ROWSET/ROW/*')
) t
order by "Table";You may have noticed that this site noramlly compresses whitespace.
Whenever you post formatted text (such as query results) on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.
When referencing a table in a differenct schema, you must qualify the table name with the owner (unless there happens to be a synonym). For example, if you are connected as some user other than scott, and you want to use the emp table that is in the scott schema; then you can't just say "SELECT ... FROM emp;", because that would look for the emp table in yur own schema. You have to say "SELECT ... FROM scott.emp;" instead. If the table is in your own schema, then the scema name is optional. The OWNER column in all_tab_columns gives the schema name.
running teh above query got me thsi error:
ORA-19202: Error occurred in XML processing
ORA-00942: table or view does not exist
ORA-06512: at "SYS.DBMS_XMLGEN", line 288
ORA-06512: at line 1
19202. 00000 - "Error occurred in XML processing%s"
*Cause: An error occurred when processing the XML function
*Action: Check the given error message and fix the appropriate problemSorry, I don't know what causes that error.
If I use the data dictionary view cols (as in {message:id=3325696} which you cited), it runs correctly.
If use what I though was the equivalent data dictionary view, user_tab_columns, or if I use all_tab_columns or other data dictionary views, then I get those errors. I'm using Oracle 10.2.0.1.0.
Edited by: Frank Kulash on Sep 3, 2012 10:45 PM
John Spencer noticed the same problem 5 years ago. See {message:id=1969268}

How To Make Search Query Showing the Result As List of Buttons.

Can some one give me an idea how to start to make a Search Query showing the results as list of buttons.. i have already have my buttons with names. i just dont know how to make a search query.
this is my on screen keyboard i made..
im making a system that the result were a list of buttons.. showing like this
This was supposed to be the output of the query that i need to do..
Please help me.. i just need a idea or tips how to make this one.

Here is code I posted recently for another question
Public Class Form1
Const BUTTON_SIZE As Integer = 20
Const SPACE As Integer = 5
Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
Dim buttons As New List(Of List(Of MyRadioButton))
For row = 1 To 6
Dim newRow As New List(Of MyRadioButton)
buttons.Add(newRow)
For col = 1 To 6
Dim button As New MyRadioButton()
button.row = row
button.col = col
button.Height = BUTTON_SIZE
button.Width = BUTTON_SIZE
button.Left = col * (BUTTON_SIZE + SPACE)
button.Top = row * (BUTTON_SIZE + SPACE)
button.Name = String.Format("radGr1{0}_{1}", row.ToString(), col.ToString())
Me.Controls.Add(button)
newRow.Add(button)
AddHandler button.CheckedChanged, AddressOf Radio_Change
Next col
Next row
End Sub
Private Sub Radio_Change(ByVal sender As Object, ByVal e As System.EventArgs)
Dim button As MyRadioButton = CType(sender, MyRadioButton)
Dim row As Integer = button.row
Dim col As Integer = button.col
End Sub
End Class
Public Class MyRadioButton
Inherits RadioButton
Public row As Integer
Public col As Integer
End Class
jdweng

Failure to search - query window problem

Similar Messages

Maybe you are looking for