Failure to synch

I recently inadvertently trashed my Palm software from my dock. When I replaced it I could no longer hot synch. I then reinstalled the software, and still could not synch. Today I updated the software and still cannot synch. Files dragged into the Hot Synch box are automatically rejected. Any suggestions??? Greatly appreciated.
Post relates to: Palm TX

Configure your hotsync connection setup to "Cradle/Cable."
Try a "Soft reset" by poking the reset hole at the back of your device with your stylus. = WRONG
!!! Never mind, I am not a Mac person !!! Ignore my instructions, I misperceived the message.
Good luck
Message Edited by BIGJOA on 08-14-2009 08:48 AM
Message Edited by BIGJOA on 08-14-2009 08:49 AM

Similar Messages

I have vista, although I am getting my email on IPhone I cannot seem to synch with Itunes, there is a failure to synch window. Also, I can't get my calendar on IPhone.

I am getting a failure to synch message on the ITunes screen. I do get my emails on the IPhone but can't seem to get my calendar. This system is windows mail/calendar.

No, it's telling you to upgrade iTunes on your COMPUTER. Not on your phone. Download and install the latest version for http://www.apple.com/itunes.
If you have a Mac, you must be running at least OS X 10.6.8.

Failure to synch some songs from itunes on IPAD 3

when i last synchronized my IPAD to my computer i tried to download many new songs. about 1/2 the songs downloaded and the remainder are pale grey on the IPAD. a message popped up indicating that the songs did not download. i restarted both the computer with ITunes and the IPad and tried to synch again. i did successfully synch all the songs from the computer to my IPod. has any one else experienced this problem?

See the More Like This Section on the right...

Failure to synch outlook calendar

Been trying to synch my outlook calendar but I am unable to. This is the error message in the synch log
Outlook Calendar synchronization aborted
Duration: 4.1 seconds
Outlook Calendar
OLERR:03-0010
OLERR:0D-0028
OLERR:0D-000A
OLERR:0D-0004
OLERR:0D-0001
- Desktop overwrite HH Sync
OLERR:15-0002
OLERR:06-0001

I'm having a similar problem. Here's the error message I got:
OK Expense
OK Quick Install
OK Note Pad
Outlook Notes
The selected source folder [Personal Folders\Notes] was not found in Outlook. Synchronization will be performed with the default source folder [imap.oradvocacy.org\Notes].
OLERR:0A-000F (0xf384010f)
OLERR:0D-000E
OLERR:0D-0004
OLERR:0D-0001
- Recovery Sync
Outlook Notes synchronization failed
OLERR:15-0002
OLERR:08-0001
Outlook Calendar
The selected source folder [Personal Folders\Calendar] was not found in Outlook. Synchronization will be performed with the default source folder [imap.oradvocacy.org\Calendar].
OLERR:03-000F (0xfbb4010f)
OLERR:0D-000E
OLERR:0D-0004
OLERR:0D-0001
- Recovery Sync
Outlook Calendar synchronization failed
OLERR:15-0002
OLERR:06-0001
Outlook Contacts
The selected source folder [Personal Folders\Contacts] was not found in Outlook. Synchronization will be performed with the default source folder [imap.oradvocacy.org\Contacts].
- Recovery Sync
OK Outlook Contacts with 1 message(s)
Outlook Tasks
The selected source folder [Personal Folders\Tasks] was not found in Outlook. Synchronization will be performed with the default source folder [imap.oradvocacy.org\Tasks].
OLERR:0E-000F (0x81e4010f)
OLERR:0D-000E
OLERR:0D-0004
OLERR:0D-0001
- Recovery Sync
Outlook Tasks synchronization failed
OLERR:15-0002
OLERR:0F-0001

Cannot Synch iPhone on New 8-Core Mac Pro

I have had my iPhone since the first day they went on sale in June 2007. It has performed flawlessly for me and continues to do so. I have been using the iPhone with a white iMac purchased in March 2007. I have never had the slightest problems with synching my iPhone on my iMac under first Tiger and now Leopard.
Yesterday I purchased an 8-core iMac with Leopard installed. The 8-core is running beautifully. I used Setup Assistant when I booted up my Mac Pro for the first time to transfer my data, applications, etc. from my iMac to my Mac Pro. The transfer appeared fine for over 3.5 hours with the blue progress bar going all the way to the right. Then with "one minute remaining" the process hung and went unchanged for 1.5 hr. I called Apple Support. They told me to shut down and then reboot the Mac Pro. I did and it booted up fine. I found that some of my applications had to be reinstalled and I did so. These apps then ran fine.
However, although iTunes ran fine on my Mac Pro and my music library appeared just as it should, I got the following error message when I tried to synch iTunes with my iPhone: The iPhone "My Name" cannot be synched. You do not have enough access privileges for this operation!". This is in spite of the fact that my account is an administrator account.
Once again I spent 3 hours on the phone with Apple Support and went through two levels of iPhone support. In the end they could not solve the problem. My final Apple Support person recommended an archive and install. I have now completed the archive and install. I am still experiencing the same error message when I try and synch the iPhone.
I am desperate to solve this problem, and I would appreciate any help anyone can provide.
One more piece of information. My iPhone does appear in iTunes when it is sitting on the dock. The synch does begin before this error message appears. Furthermore, when I select the Info Tab across the top after selecting my iPhone under the devices on the left, and I make any changes and click "apply" the iPhone synchs, finishes synching, and does so with no error messages. However if I then hit the synch button again, I get the behavior described above with a failure to synch and the given message.
I thank you in advance for any help that you can provide to me. All suggestions are welcome.
Tom

I have the same problem and I was getting very frustrated with this because when the alert comes up it gives you no idea of where to look for a solution BUT I also just found a website which helped me resolve the problem. I just did it and everything is fine. The iPhoto is the culprit here and you have to reset it's permissions and privilages.
Read on and happy syncing!
http://vaguelyaware.com/2007/11/01/leopard-aches/

Blackberry Link - fails with Microsoft Visual C++ Runtime Library error - cannot synch/backup

With the latest version of BB Link, under WIndows 8.1, I get a persistent Microsoft Visual C++ Runtime Library failure, when synching contacts or when doing a regularly schedulded backup. Infrequently, the backup will complete, but it fails 95 % of the time. Worked fine on previously version of BB Link and Windows 8.0.

Well, uninstall that RadLab thing, reboot and see if PSE then works.
Ken

Zaire 72 synch

Have a recently acquired Zaire 72. Using Palm Desktop 6.2 on a Compaq with Windows 7 (64)
Tried to Synch for a week without success. Finally managed one Synch successfully.
Tried again 3 days later with no success. Using Bluetooth.
Attempts result in " Failure to Synch due to Port in use by another application ".
Checked system , only one port active and that one is Bluetooth.
Have reached total confusion state.
Post relates to: Zire 72

Click on the following link to the kb.palm.com webpage for the article regarding 'Unable to initiate HotSync operation because the port is in use by another application.'
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=31375
Click on the following link to the kb.palm.com webpage for the article regarding Synchronizing under 64-bit Windows editions: Bluetooth HotSync setup.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=49229
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/zire/72/unlocked/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Rreading and writing this file's metadata (xmp) has been disabled. Renders unplayable/corrupted files

Hi everyone,
I've been using Premiere Pro CC for a while now, as I have a YouTube channel, and I've rendered, exported and edited around a dozen different videos, and have had no issues until now. I haven't done anything to my settings, but randomly, I am now unable to export any videos. I've tried exporting multiple times, using different formats, and I still get the same error:
     File importer detected an inconsistency in the file structure of [FILE NAME]. Reading and writing this file’s metadata (XMP) has been disabled.
I've looked around, and I've seen just about no help in fixing the issue, so I was hoping that someone could help me out.
Some of my computer details are:
Premiere Pro CC
Toshiba Z10T
Windows 8.1
Hopefully that's enough to go by
Thanks guys

After moving LR3.5 and catalogs to a new computer running Windows 7 and LR from an XP system, I suddenly had 6400 files with exclamation points--failure to synch metadata or similar warnings on every file. If I thought I had one without the error, if I clicked on it--there error showed up.    It was very frustrating and I was wondering if I was going to have to keep my old computer forever.
After I searched for a couple of hours and found that there have been several discussions concerning failures to sync xmp sidecar files and failures to write metadata on this forum and others. Some of the postings had angry rants against Adobe. On my system, it was not Adobe that should be blamed, it was Microsoft:
On one of the Adobe threads, I noticed a post that the person had multiple external drives and the problem did not show itself on one drive. The person said that changing the permissions on the other hard drives solved the problem.   I tried this and it worked for me. I did not have this problem with this same drive on my XP system. I will try to find that other forum and thank the person who gave me the solution.

Xmp sync problems--corrupted files?

I have been having lots of problems getting my xmp metadata sorted out. I am a new user to Lightroom, but I think I have figured out most of what I need successfully.
I use a variety of programs to edit the xmp data (mostly Lightroom and exiftool right now), so I know the importance of the "Automatically write XMP data to file setting" (ON in my case). After a few days (actually more like a week) of writing xmp data and then reading into (or synching folders in) Lightroom, I found a number of "metadata conflicts" in my catalog. Since these are basically impossible to fix for a large catalog (since there is no way to show the files that have conflicts), I started over and created a new catalog, and imported all 40,000+ images into it.
However, with my new catalog (with presumably no metadata conflicts), the first image that I tried to change the metadata on gave me a metadata conflict (presumably when Lightroom tried to save the xmp data after I changed it). This was a jpg file, so the metadata is being (or not being) written into the file. Reading the metadata from the file into Lightroom did not fix the problem. The Metadata Status field in the Lightroom Metadata panel says "Unknown" and clicking on the word "Unknown" brings up a panel saying "There was an unknown error while writing metadata to this photo. Retry?", and neither retrying the save nor importing the settings from disk resolves the conflict.
I think that the problem is that the jpeg is somehow corrupt, because if I save a copy in Photoshop, I can read and write the metadata in that copy. And, the copy has, I think, the same metadata as the original. (Of course, the image is probably imperceptibly degraded because I re-jpeg'd it).
There is no message in Console (I'm on Mac). (See PS)
I am worried that I have a number of files with this kind of problem, and I'd like to find the problem and fix it. Any ideas for a strategy to go about doing this? I guess I could "Save Metadata" for all files in my catalog (thus updating the file modified date for all 2 TB of data, and causing a massive backup issue), and then look through my catalog for those elusive exclamation points. But I'd like something better.
I have no idea how the jpeg could have gotten corrupted, but I do have an archived version that I could look at.
Any thoughts on next steps?
TIA
Alan
PS--I did find this in my console output hundreds of times:
8/10/11 2:40:00 PM    Adobe Lightroom 3[404]    KeywordUsageStatistics    ERROR    Bad popularity entry for 1937630: occurrences is negative: -1
I don't know if that is related, but it worries me.

After moving LR3.5 and catalogs to a new computer running Windows 7 and LR from an XP system, I suddenly had 6400 files with exclamation points--failure to synch metadata or similar warnings on every file. If I thought I had one without the error, if I clicked on it--there error showed up.    It was very frustrating and I was wondering if I was going to have to keep my old computer forever.
After I searched for a couple of hours and found that there have been several discussions concerning failures to sync xmp sidecar files and failures to write metadata on this forum and others. Some of the postings had angry rants against Adobe. On my system, it was not Adobe that should be blamed, it was Microsoft:
On one of the Adobe threads, I noticed a post that the person had multiple external drives and the problem did not show itself on one drive. The person said that changing the permissions on the other hard drives solved the problem.   I tried this and it worked for me. I did not have this problem with this same drive on my XP system. I will try to find that other forum and thank the person who gave me the solution.

Hot synch failures

When I try to Hot synch my Treo 700 I get a message that the operation failured because of a conflict in the installed conduits has been detected. The example that was cited was between my contacts and my address book which is what is not being backed up. I am advised to change same under custom to do nothing. This allows me to Hot synch my calender and under programs. What do I do?
Post relates to: Treo 700p (Verizon)
This question was solved.
View Solution.

I have a Palm Treo 700P. The application is v.5.2H
Post relates to: Treo 700p (Verizon)

IPhone synch after hard drive failure

I have an iMac 7.1 and after a total hard drive failure I had a new drive installed. Everything was wiped out, but at least I have the iTunes library still on my iPhone Here starts the problem.
After reading posts for the better half of a day I tried all suggested approaches, however the descriptions for doing it within iTunes don't seem to work (they insist on erase and synch the new (empty) library. I authorized the iTunes account on the iMac - still the same.
There are programs out there that rip the content from the iPhone, something I think is the wrong approach. Apple has to provide a way for its customers that have done nothing wrong to get their data back from a legal copy on the iPhone. This right way will likely exist, I just can't find it.
Anyone can point me in the right direction?

Hi, what no back up? -- well lets be honest everything should be covered by Apple & iTunes but!!
I use SENUTI @ odd times & it's an excellent App...why you are so against 3rd party app's I'm not sure..
If you have friend with a Mac & has some music you like you can always set up SHARING & dragNdrop..
With my first mac (ibookG4) I lost all my music etc.. a lesson learned, always back up otherwise it's a long arduous task burning your cd's one by one..If you purchased your music thro' iTunes you can contact them, at times have allowed me to Re download purchased items....L

Calendar synch failure

When trying to synch Calendar from Outlook to Z10 get error message "Failure to commit changes to device". It has worked in the past and nothing is new except the latest software upgrade. Suggestions?

Submit the logs of the phone then read the logs to check any error message like this lines:
23:09:33.095|DEBUG|52|Rim.Desktop.DataSync.PiSynchFacade.|0| SyncApi.Error event - code: 18022
23:09:33.097|DEBUG|52|Rim.Desktop.DataSync.PiSynchFacade.|0|SyncApi.Error event - description: Failed to commit changes to device.
23:09:33.124|ERROR|1|Rim.Desktop.DataSync.PiSynchFacade.|0|Received error (isError=True) from iAnywhere: Failed to commit changes to device.
23:09:33.127|WARN |1|Rim.Desktop.DataSync.PiSynchFacade.|0|Cancel sync operation
23:09:33.142|INFO |12|Rim.Desktop.Shell|0|An notification message added. Title: Sync was unsuccessful
23:09:33.142|DEBUG|12|Rim.Desktop.Shell|0|Notification Message: Failed to commit changes to device.
23:09:33.142|DEBUG|12|Rim.Desktop.Shell|0|Notification Summary: Sync was unsuccessful

Hot Synch failure iQue 3600 - Windows XP

I have an iQue 3600 that I am no longer using but want to synch my data. HotSynch cannot connect with computer. When I look for HotSynch icon in system tray, it is a black box. What do I need to do to synchronize my data? Do I need to reinstall my software?
Post relates to: None

The Garmin support page for your unit (Including Palm Desktop) can be found here:
http://www8.garmin.com/support/collection.jsp?product=010-00264-00
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

OID: Synch With Database Failure

Hello,
We're using OID to try and synch with a database table. We are getting the following error:
DataBase Connection Success
Change Key NULL..!!
ODIException in DB Reader Initialization : DIP_GEN_SPACE_STR
DBImport:Error in Mapping EngineODIException: ODIException in DB Reader Initialization : DIP_GEN_SPACE_STR
ODIException: ODIException in DB Reader Initialization : DIP_GEN_SPACE_STR
at oracle.ldap.odip.gsi.DBReader.initialise(DBReader.java:276)
at oracle.ldap.odip.engine.AgentThread.mapInitialise(AgentThread.java:327)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:253)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:149)
We can't find any description anywhere of this error. Any ideas? Is it the query file (included below) or something else? It connects to the database just fine. Any pointers would be greatly appreciated.
------------------------------ Config File Entry -------
[DBQUERY]
SELECT: SELECT \
ACCOUNT_GUID,\
SUBSCRIBER_ID,\
FIRST_NAME||' '||LAST_NAME "UNAME",\
REPLACE(EMAIL,'@comcast.net','') "UID",\
EMAIL,\
TELEPHONE_NUM "TELEPHONE",\
TO_CHAR(REC_CREATE_DATE,'YYYYMMDDHH24MISS') "Modified_Date" \
FROM \
CTE_TRANS.SUBSCRIBER \
WHERE \
REC_CREATE_DATE<TO_DATE (:Modified_Date,'YYYYMMDDHH24MISS')\
ORDER BY \
REC_CREATE_DATE
[SYNC-PARAMS]
CHANGEKEY: Modified_Date
Thanks
Ray Harrison
Comcast Corporation

Hey Shu
I also wants some information to do same as of your question.
if u have some hint in these days please do send me too.
My mail id is [email protected]
thank u.
Samir

After doing a "restore", my gen 3 itouch won't synch with my computer itunes content, tunes, apps, etc. all software is current. synch process runs 1-4 steps, then lists failure errors. help?

my gen 3 itouch wouldn't synch, so i "restored". still no synch. all itunes, ipod software is current. a few apps have synched. but no tunes. the synch process runs completely, steps 1 to 4 take about 15 mins. error window alerts that 50 apps didn't synch (with error codes for each one), there is no music content in the itouch window.
a few scattered basic apps do work, and email works with updates as well. i think i have followed the trouble-shooter tips properly, but i'm confounded. can someone help?

Does the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
-- cj

Failure to synch

Similar Messages

Maybe you are looking for