Failure to visualise browser in iTunes for a connected device to eg. iTouch or iPhone

It irritating that after numerous updates the browser view iTunes only works for the library and not for an attached device such as an iTouch.
Has anyone found a way of solving tis problem other than reverting to an older version of iTunes
Tony

The Problem is that i cant get backup from itunes either,
because as i connect my iphone the page of tunes popups with the message "Restore to factory Settings" And when clicking on ok it will go directly to the restore iphone page . there will be no option to backup

Similar Messages

I have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?

i have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?

i had one for a long time, then when i got the ipad i didn't realize they would all still work under one so i set up the second one on that
then when i got the new iphone i put in the info for the first and main one from my mac pro and it would not work at all, and i knew it was right, then it asked me to create a new one or i couldnt finish the setup
hence why i have 3 now
hard to believe you cannot combine into one
oh well, i will just make them all accessible for all 3
thanks

How can you set up more than one device on iTunes. I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices.

How can you set up more than one device on iTunes? I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices. I have all my music/videos on iTunes on my mac book pro. Can you set up separate folders for each device and drop in what ever music/videos from the main iTunes library?

In itunes it is called syncing and you can choose exactly what content to sync to all devices and it can be different for all of them
How to sync

TS3221 iTunes could not connect device due to unknown error (0xE8000012)

TS3221 iTunes could not connect device due to unknown error (0xE8000012) please tell me the solotion

Turn your iPhone to a DFU mode and restore it

WRT54GS Access Restriction for WiFi Connected Devices

I have the WRT54GS v4 running with the latest Firmware Version: v1.06.3 -- I am attempting to add Access Restrictions for a few MAC addresses and IP addresses (my kids iPod Touch and laptop).
I am simply wanting to deny total internet access from 9pm to 7am. I have gotten it to work but ONLY for computers that are actually plugged into the router (cat 5 internet cables). All the computers/devices that connect to the router via wifi do not seem to be restricted at all. I am thinking this is an issue with the router in that it ONLY seems to apply the Access Restriction rules to those devices that are actually directly connected by hardwire.
Has any one else noticed this issue for WiFi connected devices? Access Restrictions do not seem to apply to WiFi connected devices.
Please help -- I would hate to have to buy another router.

Are you sure you have enter the correct MAC address or IP address? Wired connections use different MAC and IP addresses then wireless connection...

E71 web browser will search for WLAN connection in...

The E71 web browser will search for and present a list of WLANs whilst the phone is in offline mode without asking first. When you then select a WLAN from the list, it does ask if you wish to create a WLAN connection in offline mode. Surely it should ask before searching?

With new FW i can't set, that browser ask me.
Before new SW , browser alwasy give me an option to choose wlan connection..
I this a bug in new FW ?

Can you get iTunes for an Android device?

I have iTunes for Windows, but can I get it for my Android device or is it strictly for iPhone?

The iTunes application isn't available for Android.
(101580)

HT201210 My iphone is requesting me to connect to Itunes, and once connected i am asked to restore iphone. Then a box apears saying there is an error, please help

My iphone is asking me to connect to itunes , once connected i am asked to restore iphone, when i click restore it comes up with a box saying there is an error,
Please help

Hi charliew1,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting steps in this article helpful:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Best,
Jeremy

How do I move my iPhone back ups to a new computer which is already using iTunes for a different device?

I have backed up my children's iDevices to my work computer. Now that my wife has a new computer, she wants to be able to manage their devices from home. Of course, she is already using her computer to manage her iPhone.
Is there a way to move my iTunes library files to my wife's computer so that it will recognize both her iPhone as well as our children's iDevides, without losing any data, playlists, etc.?
TIA

No. You cannot join the two libraries. She can make a copy of your iTunes library on her computer, then switch libraries when opening iTunes if she needs to handle the other devices. Note that everything you have downloaded for your kids on your computer are connected to your Apple ID. Your wife cannot transfer anything to her Apple ID.
Using More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers4. I
have made substantial changes to improve readability and syntax.

Are they ever gonna make a version of Itunes for windows mobile devices

I bought the Moto Q, great phone/pda/mp3 player. Does all I need to do in just one piece of electronics that fits conveniently on my hip. No,I do not work for Motorola, but I like this phone. My issue is, I have purchases from the Itunes store that I would love to tranfer to this mobile device with out having to take it to the hospital for same day surgery. I know, I can rip multiple audio cds of my music then tranfer them to my laptop (which I use for syncing my mobile device), use software to convert them from audio files to mp3s or wma then copy and paste them to my Moto Q. WAY TOO MUCH HASSLE!
I like using Itunes as my place to purchase new music but I may have to go to a site that will sell me wma files i can play on my Q. My Q runs windows media center for mobile devices so it will play MP3, WMA and i think unprotected AAC files but the protected AAC files on my tower will not play after being copied to the memory card.
Just because they don't make a phone/pda/mp3 player for apple that rocks, do I have to STOP BUYING MY MUSIC AT THE ITUNES STORE, and start buying them thru microsoft????

How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library.   Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC.   If iTunes still crashes, then if could be a number of other things, but probably not your library.   My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes.   If that doesn't work, then my next ideas you won't like.

How to solve issue with strange iphoto events shown in itunes for sync IOS devices ? This issue is very old and not been fixed by apple... terrible

all softwares latest version january 2013.
I see in itunes many strange crazy iphoto events that in iphoto do not exist.
These vents are named as data and contains just few photos.
each event can be sync with IOS devices, but that event is not in iphoto !
It looks like miniatures... no way to solve this issue making all possible maintenance in iphoto library.
THis issue is very old, very terrible, people start to have doubts about iphoto as a reliable software.
Need a fix asap.
Apple please help!
I were with 2 hours at genius bar but nothing.
Genius told me apple have been informed and they are working on a solution..... this 4 months ago !!!
Need solution asap
THanks
Fabio

Apple aren't here. As you're the only person with this problem that I've seen on here, I would suspect that its more a local problem on your machine than something Apple need to fix.
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for the iPod Photo Cache.
Trash it. Start iPhoto and try sync again.
Regards
TD

Problem connecting to itunes for iOS 4.3.2 software update on iphone 3GS

i'm having problems updating my iphone 3GS to iOS 4.3.2 software due to a network issue. when i run a diagnostic, it says that a secure link to itunes store failed. i don't have a firewall or any security software that prevents the connection. i also can't update my apps through itunes because it can't connect. i currentyly have the iOS 4.2.1 version. what can i do to solve this?? HELP!

Hi,
Connect your iPhone to your computer. Launch iTunes. Make sure you see your iPad under Devices on the left side of the iTunes window.
Now click the Summary tab from the menu and click Check for Update.
Carolyn

Itunes for windows 7 crashes when I plug my Iphone 4s in

I'm running Itunes 11.1.4.62 in Windows 7 Professional SP1 environment.
It works fine until I plug my new Iphone 4S in, then it just becomes unresponsive... no matter how long I leave it. The only way to exit is to shut it through task manager.
Its always worked fine with my Ipod!

The error message that eventually shows on the frozen application (if I minimise all other windows) states:
iTunes was unable to load data class information from Sync Services.
Reconnect or try again later.
Please help!

How to delete in iTunes for Mac some PDF files, previously synched with iPhone and then deleted from it?

A while ago I synced some PDF files from my iTunes to my iPhone. I've deleted those PDF files from my iPhone recently but now i'm trying to delete them from iTunes but can't. How can this be done?
P.S. Tried to select/highlight them (OK) and then to delete with cmd+Backspace - doesn't work

I am sure the URLConnection.defaultUseCaches is set before it is connected otherwise I should catch an IllegalStateException on conn.setUseCaches(false).
        try
            URL url = new URL("jar:file:/C:\\a.jar!/a.gif");
         URLConnection conn = url.openConnection();
         conn.setDefaultUseCaches(false);
         conn.setUseCaches(false);
            Icon icon = new ImageIcon(url);
            System.out.println("icon size ? " + icon.getIconHeight());
            url.openConnection().getInputStream().close();
            System.gc();
         System.runFinalization();
            File file = new File("c:\\a.jar");
            while (file.exists())
                file.delete();
                try
                    Thread.sleep(10);
                catch (InterruptedException ignored)
            System.out.println("file deleted.");
        catch (Throwable t)
            t.printStackTrace();

WES610N - only one MAC address for all connected devices

Hi! I use a WES610N 4-port WLAN bridge to connect my audio and video devices (Pioneer AV receiver, Samsung TV set and a WD Live TV box) to my E4200 router upstairs. This works fine and the WLAN connection works stable and fast. There's a Synology 212j NAS running DM 3.2 connected to my E4200 router. On this NAS a DLNA/UPnP media server is running to stream audio and video from the NAS to my Receiver, to my TV set and to the WD Live TV box. Audio and video is ok but i also want to send photos from the NAS direct to the TV and WD Live. To see the photos in the correct solution i have to configure a DLNA profile on the media server for each DLNA client which connects to the media server. I have to configute this based on the device name, IP address and MAC address shown in the clinet list of the media server. So far so good - and here's my problem: Every device connected to the WES610N is seen with the same MAC address - the one of the WES610 - by the media server. This confuses the server and it's not possible to assign a DLNA profile to each of the devices (TV, Receiver, WD box) because the IP - MAC pairing always changes when one of the devices sends data packets to the media server. So the assigned profile configuration gets lost and switches back to standard DLNA profile and photos can not be displayed correct by the devices. So what i would need is that every device connected to the WES610N is seen by the media server by it's on MAC address. Is there a solution or are there plans to implement this in future firmware versions? Thx, BR Christian

You can try the following combination of settings :-
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
1] Open the software and go to the option which says "Router Settings"
2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
3] Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your routers main/ basic setup page)
4] Then click on Security tab disable SPI Firewall Protection, uncheck Filter Anonymous Internet Requests...
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the user name field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.
Then check the connectivity status...

Failure to visualise browser in iTunes for a connected device to eg. iTouch or iPhone

Similar Messages

Maybe you are looking for