Failure using the VxD loader.

Name HL-DT-ST DVD-RAM GH15L SCSI CdRom Device
How do I fix this? Error code 19. I have only had this HP for 11 months and now I get this failure error.

SCSI\CDROM&VEN_TSSTCORP&PROD_CDDVDW_TS-H653N\4&21597100&0&010100
Failure using the VxD loader.

Similar Messages

Issues using the outline load command on Planning Version 11.1.2

Hi All
I am trying to add members into the Account dimension using the outline load utility within Planning version 11.1.2 and I am getting the following error message:
Unable to obtain dimension information and/or perform a data load: Unable to create print writer for log file. “D:Oracle\Middleware\user_projects\epmsystem1\Planning\planning1\Data\Log” is a directory. Exception in thread “main” java.lang.NullPointerException at com.hyperion.planning.utils.HspOutlineload.loadAndPrintStatus<Unknown Source> at com.hyperion.planning.utils.HSPOutlineLoad.main<Unknown Source>
The command synatx I am using is:
Outlineload /A:Plan01 /u:admin /I:D:\Oracle\Middleware\user_projects\epmsystem1\Planning\Planning1\Data\account.csv /D:Account /T
Where the headers of the csv import file I have used are:
Parent,Account
and
Account,Parent
I am e studio enviroment so not sure if this will cause issues.
Any help would be greatly appreciated
Regards

Hi All
I am trying to add members into the Account dimension using the outline load utility within Planning version 11.1.2 and I am getting the following error message:
Unable to obtain dimension information and/or perform a data load: Unable to create print writer for log file. “D:Oracle\Middleware\user_projects\epmsystem1\Planning\planning1\Data\Log” is a directory. Exception in thread “main” java.lang.NullPointerException at com.hyperion.planning.utils.HspOutlineload.loadAndPrintStatus<Unknown Source> at com.hyperion.planning.utils.HSPOutlineLoad.main<Unknown Source>
The command synatx I am using is:
Outlineload /A:Plan01 /u:admin /I:D:\Oracle\Middleware\user_projects\epmsystem1\Planning\Planning1\Data\account.csv /D:Account /T
Where the headers of the csv import file I have used are:
Parent,Account
and
Account,Parent
I am e studio enviroment so not sure if this will cause issues.
Any help would be greatly appreciated
Regards

How to use the property-loader?

Hello,
i´m using TS 3.5 and LV 8.0. Now i also want to use the built-in property-loader from Teststand.
Is there somewhere a documentation for "beginners" how to use this property-loader? At the end i want to read parameters from an ascii-file which updates my input-parameters of the steps in the current-sequence.
I know how to read and change parameters from teststand in labview via active-x, but i have no idea how to use this propertyloader-thing.
Is there an easy help file somewhere in the net ( I havent found one yet)?
Thanks for your help.

Meanwhile i can use the propertyloader for Limits and Variables which are in a container of the teststep. What not worked was:
1.) setting the properties of a "Messagebox". For example the property "Button1Label". Why is this not working?
2.) The second thing what is not clear: Do i need for each sequence an own property-loader? I tested it with a sequence with one subsequence. Does the subsequence needs its own property-loader?
Currently the import-csv-file looks like this:
Start Marker,,,
<Step Name>,Limits.Low,Limits.High,Cont.Voltage
TestStep_1,1,2,4
TestStep_2,8,16,32
End Marker,,,
When Teststep_1 and Teststep_2 are both in mainsequence then it works. When i copy Teststep_2 in a subsequence then i get an error (-18).
Any ideas about my two questions?
Thanks

Want To Capture The File name Using the SQL Loader

Hi,
I Am loading The Data To Staging Table Using The SQL*developer, The File That need to be Loaded Will be One Of The Input To the SQL*Loader Concurrent Program.
In One Of The Column Of My staging Table I want To Put The File name.
Can We do the Same.
thanks,
Ankit

Not unless you generate the loader controlfile dynamically.. try this.. pass file name as $1 first parameter. Use the below example and modify as per your requirement
1) create table with following table structure
create table temp_table (x varchar2(20),file_name varchar2(30));
2) create data file - test.dat (contains only values for x)
abc
def
geh
ggg
fff
3) create a host file host file - test.sh with following content:
echo "load data
infile $1
append
into table temp_table
fields terminated by ','
(x,
file_name constant "$1")" > test.ctl
sqlldr <usr>/<pwd>control=test.ctl
4) run the host file from unix prompt with data file name as parameter (ensure test.sh has execute permissions)
test.sh test.dat
Hope this helps
Regards,
Bhadri

Using the Metadata Loader Command Line Utility

Hi ,
Can anybody please let me know the steps involved for import and export of metadata uing the Metadata Loader Command Line Utility with small scripts as an example.
Thanks in advance.
Vinay

I'll assume that command line utility = ombplus...
using OMBPLUS, Here it is:
OMBCONNECT my_user/My_password@host:port:SID
OMBEXPORT TO MDL_FILE 'C:/temp/DELTA_RS52_LICC2.mdl' \
FROM PROJECT 'NEW_ARCHITECTURE' \
COMPONENTS ( \
LOCATION 'TRG_NEW_ARCH_WORKAREA_LOC',\
CONNECTOR 'TRG_WORKAREA_LIBOWNER_CONNECT', \
ORACLE_MODULE 'TRG_WHOWNER', \
TABLE 'CPF_VALID3', \
TABLE 'CPF_VALID3_2', \
TABLE 'CPF_VALID3_3', \
TABLE 'CPF_VALID3_4', \
MAPPING 'MAP_WA_CLAIM_DIM', \
MAPPING 'MAP_WA_POLICY_DIM2_INS', \
MAPPING 'MAP_WDC1_CLIENT_FOR_LIB', \
FUNCTION 'UPD_WDC1_CLIENT_LIB', \
FUNCTION 'VALIDATE_CHARGED_PREMIUM_1_F', \
FUNCTION 'VALIDATE_CHARGED_PREMIUM_2_F', \
FUNCTION 'VALIDATE_CHARGED_PREMIUM_3_F', \
FUNCTION 'VALIDATE_WA_DRIVER_VEH_FACT_I', \
PACKAGE 'INITIALIZATION', \
ORACLE_MODULE 'TRG_WORKAREA', \
TABLE 'AUPMGEN', \
TABLE 'AUPMGEN_TR0', \
TABLE 'WDC1_CLIENT_LICC', \
TABLE 'WDC1_CLIENT_LICC_TEMP_UPD', \
TABLE 'WG_CHARGED_PREMIUM_VALID', \
FUNCTION 'GET_DT_TRX_TRANSACTION', \
FUNCTION 'GET_OCC_OP_LKP', \
PROCEDURE 'DISABLE_ENABLE_CONSTRAINTS', \
PROCEDURE 'EXEC_WF_CPF_VALIDATIONS', \
PROCEDURE 'EXEC_WF_DAUTO_DAILY', \
PROCEDURE 'EXEC_WF_PER_GENDAT_DAILY', \
PROCEDURE 'EXEC_WF_PER_GENTER_DAUTO', \
PROCEDURE 'LOAD_PAST_FUTURE_CALENDAR', \
PROCEDURE 'VALIDATE_CHARGED_PREMIUM_DS', \
MAPPING 'MAP_AUPMCON_LIB', \
MAPPING 'MAP_AUPMGEN_LIB', \
MAPPING 'MAP_AUPMGEN_LIB_CPF', \
MAPPING 'MAP_AUPMGEN_TR', \
MAPPING 'MAP_AUPMGEN_TR0', \
MAPPING 'MAP_AUPMGEN_TR0_CPF', \
MAPPING 'MAP_AUPMGEN_TR0_CPF_PERF', \
MAPPING 'MAP_AUPMGEN_TR_CPF_PERF', \
MAPPING 'MAP_AUPMVEH_LIB', \
MAPPING 'MAP_AUPMVEH_LIB_CPF', \
MAPPING 'MAP_CHARGED_PREMIUM_FACT_TR1', \
MAPPING 'MAP_IA_POLICY_TERM_LKP_2', \
MAPPING 'MAP_SA_POLICY_SALES_CHAN_LIB', \
MAPPING 'MAP_SIPGED_DAILY_2_LIB', \
MAPPING 'MAP_SIPGED_LIB', \
MAPPING 'MAP_SIPGED_TR', \
MAPPING 'MAP_SIPRES_LIB', \
MAPPING 'MAP_SIPVES_LIB', \
MAPPING 'MAP_WA_CLAIM_FACT_TR1', \
MAPPING 'MAP_WA_DRIV_VEH_FACT_TR1', \
MAPPING 'MAP_WDC1_CLIENT_LIB', \
MAPPING 'MAP_WDC1_CLIENT_LICC_LAST_VERS', \
PROCESS_FLOW_MODULE 'NEW_ARCH_WF', \
PROCESS_FLOW_PACKAGE 'DAUTO', \
PROCESS_FLOW_PACKAGE 'WAUTO') \
OUTPUT LOG TO 'C:/TEMP/DELTA_RS52_LICC2_exp.log'
#now to import,still with OMBPLUS,
OMBCONNECT my_user/My_password@host:port:SID
OMBIMPORT MDL_FILE 'C:/temp/DELTA_RS52_LICC2.mdl' USE UPDATE_MODE OUTPUT LOG TO 'C:/temp/DELTA_RS52_LICC2_imp.log'
Hope this is what you wanted
Michel

Hello!I only want to use the sql loader,and then what sould I do?

Such as the title

f7ae7c6c-6210-4d88-b8c9-fad38d9ee626 wrote:
but somebaby say i can
1> scp [email protected]:/home/oracle/oracle_home/bin/sqlldr/usr/local/oracle/sqlldr
   2> mkdir -p /usr/local/oracle/rdbms/mesg
      cd /usr/local/oracle/rdbms/mesg/
      scp [email protected]:/home/oralce/oracle_home/rdbms/mesg/ulus.msb./ulus.msb
and then can use the sqlldr
but somebaby say i can
Ok, knock yourself out ...
Guy: Where did you hear that?
Girl: On the internet
Guy: And you believed it?
Girl: Sure. They can't put anything on the internet that isn't true
Guy: Where did you hear that?
Girl: On the internet. Oh, here comes my date. I met him on the internet. He's a French Model.
Guy 2 (with sly wink) : Bonjour
http://www.youtube.com/watch?v=bufTna0WArc
============================================================================
BTW, it would be really helpful if you would go to your profile and give yourself a recognizable name. It doesn't
have to be your real name, just something that looks like a real name. Who says my name is really Ed Stevens? But at
least when people see that on a message they have a recognizable identity. Unlike the system generated name of
'ed0f625b-6857-4956-9b66-da280b7cf3a2', which is like going to the pub with a bag over your head.
Call me a racist, but all you ed0f625b-6857-4956-9b66-da280b7cf3a2's look alike to me.
============================================================================

How to load the international characters by using the SQL*Loader(UNIX)?

Hi Everyone,
I am not able to load the international characters thru SQL*Loader which is calling from Unix. Whenever I load these characters , appears in DB such as Square box. Please help me how to resolve the issue.
Using version is:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE     10.2.0.4.0     Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Productio
NLSRTL Version 10.2.0.4.0 - Production
Thanks in advance.
Regards,
Vissu.....

This may help
SQL> CREATE TABLE test_sqlldr_unicode (id INTEGER, name VARCHAR2(100 BYTE));
Table created.Now my data file.
1,"ABóCD"
2,"öXYZó"
3,"EFGÚHIJK"
4,"øøøøøøøøøøøøøøø"My control file.
LOAD DATA
CHARACTERSET WE8ISO8859P1
INFILE 'C:\test_sqlldr_unicode.txt'
REPLACE
INTO TABLE test_sqlldr_unicode
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
(id INTEGER EXTERNAL , name )
{code}
Running the sqlldr
{code}
C:\>sqlldr USERID=hr/hr CONTROL=test_sqlldr_unicode.ctl LOG=test_sqlldr_unicode.
log
SQL*Loader: Release 10.2.0.1.0 - Production on Thu Dec 30 19:38:22 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 5
C:\>
{code}
The table
{code}
SQL> SELECT * FROM test_sqlldr_unicode;
        ID NAME
         1 ABóCD
         2 öXYZó
         3 EFGÚHIJK
         4 øøøøøøøøøøøøøøø
SQL>
{code}

Using the network load balancing from the nodes itself

I have installed a 2 node Sun Cluster 3.2, configured a shared ip resource and attached to it a scalable network aware resource working on the two nodes. I have crashed the process on one of the node in such a way that the cluster could not restart it again
In this status I tried to open a connection from another server and the load balancer always sent the traffic to the node that was up which is as expected...
If I try to open a connection from the node on which the process is failed then I get a connection refused meaning that the load balancer is not working in this circumstance.
Is this a bug/ a mis-configuration/ or just an inherent cluster problem.
Is there a solution to this issue?
Regards
Daniel

To answer your first question, no, there isn't anything you can do.
Here is what my colleague suggested while I was away:
Zone-clusters scalable services still require shared-IP zones, which means requests from one app to another would still bounce back due to loopback. Probably wouldn't help here.
They could isolate the services that must talk to other services into their own failover group on exclusive-IP zones. Other services can be setup as originally planned. But maybe there are too many such "dependent services" for this to be useful. Also, each failover service must have its own IP address.
Finally, can these web services be configured so that it tries multiple addresses. In that case, if the shared address foo for service X bounces back (due to X having crashed on the local node), the app itself would retry with address bar for service X? This allows for uniform configuration across all services, namely:
    - try shared address
    - try node 1's own address (either public or clusternode1-priv)
    - try node 2's own address
You can fine tune it so that configurations on node 1 only use node 2's address as backup, and vice versa. I don't know if that is any help.
As for your second question, the answer is that Solaris Container Clusters allow for consolidation and isolation of clusters onto a single set of nodes. Normal containers don't really allow you to consolidate complete clusters in quite the same way. See http://www.sun.com/offers/details/820-7351.html for more.
Tim
---

HT201362 hi, please guide me how to use the down load function! I really facing problem when selected software but can't smoothly up load?

Hi, we're any expert can teach me the best solution or software can easily down whatever good lecture or good movie can easily control and. Down loading. Very much thankful to you

>> then I get a completely blue screen.
That probably means that you're not looking at a bug in Photoshop, but a problem with a driver - and the most likely cause would be your video card driver.
And sure enough, your video card driver is almost 2 years out of date.
Please go to NVidia's website and get the latest driver - then follow their directions for installation (so you don't get bits of old driver left over).

Load multiple files using the same data load location

has anybody tried loading multiple files using the same load locations. I need to do this as the data in these multiple files will need to be exported from FDM as a single export file. the problem i am facing is more user related. since these files will be received at different points of time, users will need a way to tell them what has been loaded and what is yet to be loaded.
is it possible to throw a window on the web broser with OK and Cancel buttons from an event script?
any pointers to possible solutions will be helpful

was able to resolve this. the implementation method is as follows
take a back up of previously imported data in the befcleardata event script. then in the beffileimport event append the data to the import file. there are many other intricacies but this is the broad implementation logic. it allowed my users to load multiple files without worrying about append or replace import type choices

Using the vanilla/default preloader to load additional assets?

I have a Flex application that automatically loads the SWF and it's contents and displays the default progress bar like in all Flex apps. Currently I have a class in the application using a Loader instance to load a few external bitmaps to be added to the stage/canvas as well as an MP3. I'd like to handle the loading of these assets in the Flex default preloader and get rid of the Loader instance entirely.
How can I do this?

At least for the images, and perhaps for the sound, you need to not use loader, and instead embed the assets, because if loader is used the assets load at the same time as the SWF, which is too late.
So in the createChildren method you override when you override DownloadProgressBar:
//global var
[Embed("Logo1.png")]
[Bindable] public var logoCls:Class;
private var logoDO:DisplayObject;
// in createChildren() method
logoDO = new logoCls();
logoDO.x = (stageWidth/2)-(borderRect.width/2)+_logoX;
logoDO.y = (stageHeight/2)-(borderRect.height/2)+_logoY;
addChild(logoDO);
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

Can I use the debugger to identify items on stage?

Hi all,
I have an app that uses several Loader objects to load extenral swf files. Things go well except for one point. I have a quiz element that's loaded through a loader named 'quiz'. When the quiz is done, I remove the quiz element with removeChild(quiz). The quiz disappears from the screen every time except for one question. I can't identify what's going on differently for that question. I've debugged this and can see that my quiz object is set to null, but I can plainly see the quiz still onscreen.
To further confuse me, I use the same loader object multiple times through the app, and just add it and remove it from the display list with addChild and removeChild. When my one problem question comes up and fails to go away, the app continues to the next question, and I can see that there are now 2 quiz objects stacked on top of each other. I have no idea how this can happen when I'm using the same loader object for all the questions.
Anyway, I'm hoping I can use the variables in the debugger to identify what I'm seeing onstage, but am not sure where to start looking. Are all dispaly objects that are children of the app within the stage in the debugger variables? The root? I'm just not sure where to look. If someone can tell me where to find the display objects on the stage or whatever in the debugger variables, that would be great and I can hopefully troubleshoot it from there.

here's some code that might help . . . they're really pretty simple.
Here are the 2 main methods that handles loading and unloading the quiz.
        public function put_question():void{ // BUILD LOADER TO LOAD QUIZ SWF
            quiz = new Loader(); // QUIZ IS A CLASS VARIABLE
            addChild(quiz);
            quiz.load(new URLRequest("quiz.swf"));
        public function quiz_done():void{
            removeChild(quiz);
            ethics_content.nextScene(); // ETHICS_CONTENT IS A CLASS VAR LOADER THAT WAS ADDED TO THE STAGE
put_question is called from the timeline at the end of an animation. The method executes and puts the quiz. The quiz_done method is run when the user selects the right anwser, reads some feedback, then clicks to continue.
I have 5 scenes before the problem point that use these methods and the work great. The quiz appears, works fine, then disappears when the quiz_done function is called. In the last scene, though, the quiz just doesn't disappear when the quiz_done function runs!
I'm hoping I can find a way to use the debugger to set a break point at the end of the quiz_done method and then go through the display list and see what it is I'm still seeing, as the quiz should be removed from the display list at that point.

Business partner migration using lsmw direct load .

Hi,
We need to do business partner migration using the direct load method.
We are thinking of using direct input method of lsmw for the data transfer.
Could someone suggest a proper object/ subobject for the same.
Alternatively has anyone done the same using LSMWbapi or LSMWidocs.
Inputs will be highly appreciated <<text removed>>
Dirk.
Edited by: Matt on Dec 19, 2008 1:33 PM - Do not offer rewards. Please read the rules of engagement.

Hi ,
Does this solution give any way to update the customer fields too ?
We have few customer fields added to BUT tables ... How can we update these fields using LSMW and IDOC ?
Could you please give your opinion on thesame.

Loading file in Merge Mode through the batch loader in FDM

Hi,
I have multiple locations loading in replace mode and 1 location loading in merge. We are using the batch loader and following the naming convention specified in the admin guide. Is there a way to specify in the location name to load the file to HFM in merge mode, or does that location need a seperate adapter with the load rule set to merge?
Any assistance would be greatly appreciated

You dont need a spearate adaptor. You can achieve this by changing the naming of the files. I believe u currently use RR option for replacing the data. (seq_<Location>_<Category>_<Peiod>_RR.txt). You can use A or R appropriately in your load method.

Problems with the dynamic loader... And well... I SERIOUSLY messed up.

So you might call me an idiot. Go ahead... I deserve it.
I was in the process of updating my netbook over SSH because I left it back home when I went to school. I ended up running into problems with glibc etc... So I did something that I seriously regret...
I executed the command...
mv /lib/* /usr/lib*
This has to be the most retarded thing I have ever done ever... Like I'm not even shitting you.
To make things worse... I don't have busybox and have no method of getting busybox onto the computer.
Now I have seen about using the dynamic loader "ld-linux.so.2" to execute programs using a user defined library path. So I thought perfect, I can do this. The problem is... I can't find it. I looked on two healthy Arch machines at the locations and names. I used that to try this. I am sure at least I have a recent version of glibc installed (<current version>-1 I believe). But I still cannot find this at all. I am logged in as root over SSH but it fails to log in again on another session. So I have one session to work with it I can work it at all.
Do you have any suggestions to fix this? If not, I can always have someone tomorrow dd a copy of an arch iso tomorrow and possibly fix everything... But I would really like this fixed without all of that... Thanks...

See these two threads.

Failure using the VxD loader.

Similar Messages

Maybe you are looking for