Failure when updating E61i firmware.

Goodday everybody,
I have a problem with my nokia,
I have the first firmware on my E61i and I want to update it to the 2.066.035 (or something) and the updater does everything what I want, even downloading the firmware! When it has finished with downloading it starts with installing, but a short 10 seconds later it appearce that the firmware couldn't install on my E61i after some times I gave up and I closed the updater-program, short time later there is a pop-up from the updater what says: an internall communication error.
Did somebody have this too? and how can I solve this problem?
thank you

here is a good place to start with that error:
"Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod

Similar Messages

  • Failure when updating firmware. Write error in disc

    I have tried to update the software of my ipod of fifth generation and leaves a message that puts: failure when updating firmware. Write error in disc. Please, only it have 20 days. I need help. I have proven to put it in way disc, I have to reinstall software and nothing gives result.

    here is a good place to start with that error:
    "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod

  • WLAN icon changed when update to firmware 013.016 ...

    Its that true when updating to firmware 013.016 on Nokia C6-01 and user will get then new WLAN icon?
    Nokia C6-01 firmware v013.016
    16GB MicroSD Class 4.
    History = Nokia N73 ME, Nokia N-Gage QD, Nokia 3220, Nokia 3315, Nokia 3210.

    but..the new wlan icon look too small or look very transparent..
    Nokia C6-01 firmware v013.016
    16GB MicroSD Class 4.
    History = Nokia N73 ME, Nokia N-Gage QD, Nokia 3220, Nokia 3315, Nokia 3210.

  • When updating iphone firmware to 5.1 on my phone it says error downloading firmware, When updating iphone firmware to 5.1 on my phone it says error downloading firmware

    When im trying to update my iphone 4 from 5.0.1 to 5.1 via wireless network (straight from my phone) it downloads the 5.1 firmware almost to the end and then it says problem downloading firmware, and i dont have my computer right now so it would ve really nice to update straight from my phone. If someone have had same problems or knows how to get it work please tell me i'd appreciate it, thanks !

    Hello UKFan643,
    It sounds like you are seeing more data being used on your iPhone than you expect.  Sometimes other data is being used by information like contacts, calendars, the iOS software installed on your device, settings, and other system resources.  I recommend reviewing the following articles to learn more about storage capacity on your iPhone:
    Understanding capacity on iPhone, iPad, and iPod
    http://support.apple.com/kb/HT1867
    How OS X and iOS report storage capacity
    http://support.apple.com/kb/TS2419
    If you are still seeing more "other" data than expected, it may be that the iPhone was disconnected during syncing:
    In the case of iOS device becoming physically disconnected in the middle of syncing music, podcasts, videos or photos, it's possible that orphaned files will be left on the iOS device. This can prevent iTunes from syncing the iOS device on subsequent sync sessions.
    One symptom of this issue will be displayed in iTunes where the Capacity indicator for the iOS device will report a large amount of "Other" disk usage for the device. To resolve this issue:
    You can find more information and steps to resolve this issue at the following link:
    iOS: 'Not enough free space' alert when trying to sync
    http://support.apple.com/kb/TS1503
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Safe to use Dock when updating iPhone firmware?

    When future firmware updates become available for iPhone via iTunes, is it safe to go through the update process connecting the iPhone to my MacBook Pro via the Dock or must it be using the cable only?
    I read on an online forum that one user tried updating to 2.0.1 with the iPhone connected to the dock and it bricked it.

    I use the universal doc to connect my iPhone to my iMac and there are no issues.
    I did notice that there have been many posts in here regarding loosing music, contents, photos, etc and apps not working when using iTunes 7.7.1. So update/sync with caution. The iPhone would only be bricked if you did anything that Apple does not want you to do.

  • TS3694 How do I solve error 1015 when updating the firmware????

    Can some kind person please help me with this problem? I have the latest iTunes and I have now tried 4 times to update my phone and I get the same message everytime, Thanks

    You will get that message if you tried to downgrade the firmware. It is usually associated with jailbreaking, and if that is the case there is often no way to fix it.
    Try to force it into restore mode:
    Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.
    Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the device.
    If you do not see the "Connect to iTunes" screen, try these steps again.
    If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    When the iPhone finally appears in iTunes, choose "restore from backup".

  • Error when updating the firmware

    I get this error after trying to install the new firmware ????????
    this after the process of closing the tablet........
    Tablet Xperia Z on stock 4.4.4
    Galaxy S2 on 4.4.4
    Solved!
    Go to Solution.

    PC Companion installed on my Win 7 machine detected the Xperia Z Tablet (312) asked if I wanted to update and started through the process.
    I have tried it a number of different ways and always with the same result.
    The update gets downloaded, the process starts and PC Companion says basically...  "Your tablet will be shut down during the update, don't touch it!"
    The tablet shuts off, I hear the USB disconnect tone on my PC.  PC Companion continues for about 30 seconds and then displays this message.
    "There is no software available for your phone"
    It's sort of amusing that the same software that just informed me of an update and downloaded it is now telling me there is no update available!!!
    I have changed USB ports, done a FULL reset of the Xperia Z including wiping all data.  It's absolutely wiped clean and booting 4.4.2.
    Common Sony... did you test this process first?  I did searching on the forums and apparently this very same problem has been common on some of the Xperia's in the past.
    This should be the simple part.

  • Financial Consolidation failure when updating invoice or journal entry

    Hello
    We installed successfilly the SAP Business One Intergration for SAP NetWeaver.
    By adding invoices, creditmemos or journbal entries everything works fine.
    When we try to update a journal entry the following error occurs in the message log:
    com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.lang.RuntimeException: Dispatch object expected
    When we try to update the corresponding invoice this error occurs:
    com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.lang.RuntimeException: DI Error: (-1029) Field cannot be updated (ODBC -1029)
    Any ideas ?
    thanks in advance

    Hi,
    JE numbering document can not base on origin document. But they can be set default by user only. That is system behavior.
    Hope this helps,
    TVSon

  • P_r_request- get_logsys failure when updating InfoObject from InfoObject

    I'm trying to update master data of an InfoObject ZLCLROLE based on another InfoObject 0TCTROLE.
    I only need the master data local to the local BI system.
    So in the start routine I set:
    SOURCE_SYSTEM = p_r_request->get_logsys.
    to identify the local BI system.
    Unfortunately, this returns nothing. In debug I see that:
    o_s_request-srctp = IOBJA
    rsbc_c_srctp-datasource = DTASRC
    So it must be because I'm updating from an InfoObject.
    What is then the correct way to get the SOURCE_SYSTEM in such a case?
    Regards,
    Eric

    Hi Eric,
    did you maintain a source system id for your source system 'myself'? May be that is the issue.
    regards
    Siggi

  • How do I fix network failure when updating my phone

    I was told I needed to update my phone but it tells me the network has timed out.

    For troubleshooting error 3014 see: http://support.apple.com/kb/ts4451

  • How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

    Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

    All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
    Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
    Message was edited by: modular747

  • How to know when a software/firmware update is out?

    This is my 1st iPhone and was wondering when a software/firmware update is available do you get it through the iPhone itself or do you have to connect it to iTunes to get it?

    When you connect your phone to iTunes, you will be notified of an available update. You may also see posts here or elsewhere announcing an update (after the fact).

  • When will nokia be updating the firmware on the 58...

    just wondering when the next firmware uodate will be released for the 5800. the rumours going around saying there is a new homescreen and kinetic scrolling coming with the next firmware update.
    its hard to use the fone when u got loads of apps.
    some sites say that it is getting the n97 homescreen but some say its getting the 5530 homescreen. either 1 is good for me.
    if the 5530 can come with that type of homescreen why didnt they bring it with the 5800.
    it would make the fone alot better.

    As long as you remember that rumours is exactly what they are, you'll be fine.
    With very few exceptions (only PR2.0 and PR2.1 for the N97 AFAIK), Nokia does not announce details of firmware updates in advance. Nobody knows for sure what will be in the next update for the 5800 or indeed if there will be one at all, although a few recent events do suggest that there will be an update in the not too far future.
    So, it might be true, but don't get your hopes up based on rumours spread by people who are only going on guesswork and wishful thinking.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

    I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

    Put your phone in DFU mode,
    Hold the Power Button (3 secs)
    Continue holding the power button and also hold the home button (15 secs)
    Release the power button while continuing to hold the home button (10 secs)
    Your device should prompt with the "Connect to iTunes Screen"
    Restore.

  • Problem when updating firmware

    This morning itunes asked if iwanted to update the firmware on my 16gb ipod touch so i did. half way thourgh it said was unable to update now it just gives me the Connect iPod touch to iTunes screen when i do it says to restore and update and when i try that it just gets half way and says unable due to error.
    has any one else had this problem? If so could some please help.

    What security do you have on your computer. McAffe has a special firewall that can be accessed for block Potentially Unwanted Programs, but I don't know how to turn it off. You may want to contact McAffe personally.

Maybe you are looking for