Failures in Mail 5.1 IMAP ?
1. I am finding that Mail 5.1 is ignoring some rules and failing to divert incoming mails to the desired mailboxes.
This applies only to some rules/mailboxes and is not consistent.
The ones that it fails to re-route would fit the rule and should have been re-routed.
2. These failures, and some other oddities, have only occured since I changed the mail to IMAP - or rather - the system changed itself to IMAP and would not accept 'pop' mail.
3. It has also set up a series of mailboxes including one named 'Bulk Mail' which seems mostly spam.
( I use 'btinternet.com', in the UK , as my mail provider and email address - this is a subset of Yahoo)
Gordon Sapsed
Hi Linc,
Thank you a lot, it worked fine
PGR
Similar Messages
-
Mail crashes w/IMAP account access; EXC_BAD_ACCESS; KERN_PROTECTION_FAILURE
My Mail app crashes with error (see below) when trying to access an IMAP account. I installed Adobe Creative Suite 2, that caused Mail and Safari to both fail. I uninstalled CS2 but that didn't help.
I tried a different user account, and both Safari and Mail worked fine.
I deleted com.apple.mail.plist and com.apple.Safari.plist but that didn't help.
I re-started Mail with no accounts, successfully added the .Mac account and a POP account. Then as soon as I added an IMAP account it started failing the same way: it opens okay then fails as soon as the IMAP account checks mail. Using Mail when logged in under a different user id doesn't have this problem, so it doesn't appear to be a bad email message.
I've searched through this forum (thanks!) and believe I've collected the right data, but am unsure what to do next ... i.e. exactly where is the problem!
thanks for any help,
Chris
Date/Time: 2008-10-16 21:39:52.190 -0400
OS Version: 10.4.11 (Build 8S2167)
Report Version: 4
Command: Mail
Path: /Applications/Mail.app/Contents/MacOS/Mail
Parent: WindowServer [680]
Version: 2.1.3 (753.1)
Build Version: 2
Project Name: MailViewer
Source Version: 7530100
PID: 819
Thread: 6
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000005
Thread 6 Crashed:
0 com.apple.CoreFoundation 0x908196a9 CFHash + 17
1 com.apple.CoreFoundation 0x908195ed __CFDictionaryFindBuckets2 + 91
2 com.apple.CoreFoundation 0x90821405 CFDictionarySetValue + 165
3 com.apple.MessageFramework 0x9a034236 _selectMailboxIfNeeded + 255
4 com.apple.MessageFramework 0x9a0349ad -[IMAPOperationCache _performCopyOperation:withContext:] + 120
5 com.apple.MessageFramework 0x9a035e8c -[IMAPOperationCache performDeferredOperationsWithConnection:] + 684
6 com.apple.MessageFramework 0x99fa62bd _getPotentialConnectionForMailbox + 1052
7 com.apple.MessageFramework 0x99fa59e1 -[IMAPAccount connectionForStore:delegate:options:] + 288
8 com.apple.MessageFramework 0x99fa5819 -[LibraryIMAPStore connection] + 66
9 com.apple.MessageFramework 0x99fa54e7 -[LibraryIMAPStore openSynchronouslyUpdatingMetadata:] + 204
10 com.apple.MessageFramework 0x9a09c121 -[LibraryIMAPStore _fetchForCheckingNewMail:] + 47
11 com.apple.MessageFramework 0x9a09c223 -[LibraryIMAPStore checkNewMail] + 41
12 com.apple.MessageFramework 0x99fd31cf -[IMAPAccount fetchSynchronously] + 118
13 libobjc.A.dylib 0x90a5bd76 objc_msgSendv + 54
14 com.apple.Foundation 0x92801422 -[NSInvocation invoke] + 932
15 com.apple.MessageFramework 0x99f998d0 -[MonitoredInvocation invoke] + 128
16 com.apple.MessageFramework 0x99fa3914 -[InvocationQueue _drainQueue] + 517
17 com.apple.Foundation 0x927fa39c forkThreadForFunction + 123
18 libSystem.B.dylib 0x90024227 pthreadbody + 84
chris-norloffs-computer:~ chris$ ls -1 /Library/InputManagers /Library/Mail/Bundles ~/Library/InputManagers ~/Library/Mail/Bundles
ls: /Library/InputManagers: No such file or directory
ls: /Library/Mail/Bundles: No such file or directory
ls: /Users/chris/Library/InputManagers: No such file or directory
ls: /Users/chris/Library/Mail/Bundles: No such file or directory
chris-norloffs-computer:~ chris$
-------------------------------------------------------------------------------- ------------------Many thanks for the help.
Hi, BDAqua,
No, no 3rd party or Internet Helpers, BUT I did load Adobe Creative Suite 2 (Photoshop, Illustrator, and other apps to make me smarter, faster, and more handsome. It had some automatic updater functions, and given that Mail and Safari suffered catastrophic failures I believe they put some hooks in there).
I've since unloaded the Suite -- I should know better than to load an entire suite. Also, I now have 23GB of space on my harddrive, and wonder if I ran out of room during the install. There was no error, but CS2 comes on 4 DVDs so I wonder ...
Hi, Mulder,
I deleted the cache files - lots of stuff. I deleted two of the other files (didn't have downloads.plist).
Unfortunately, Mail still dies when it checks for mail in the IMAP account.
Date/Time: 2008-10-17 07:50:23.444 -0400
OS Version: 10.4.11 (Build 8S2167)
Report Version: 4
Command: Mail
Path: /Applications/Mail.app/Contents/MacOS/Mail
Parent: WindowServer [680]
Version: 2.1.3 (753.1)
Build Version: 2
Project Name: MailViewer
Source Version: 7530100
PID: 844
Thread: 6
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000005
Thread 6 Crashed:
0 com.apple.CoreFoundation 0x908196a9 CFHash + 17
1 com.apple.CoreFoundation 0x908195ed __CFDictionaryFindBuckets2 + 91
2 com.apple.CoreFoundation 0x90821405 CFDictionarySetValue + 165
3 com.apple.MessageFramework 0x9a034236 _selectMailboxIfNeeded + 255
4 com.apple.MessageFramework 0x9a0349ad -[IMAPOperationCache _performCopyOperation:withContext:] + 120
5 com.apple.MessageFramework 0x9a035e8c -[IMAPOperationCache performDeferredOperationsWithConnection:] + 684
6 com.apple.MessageFramework 0x99fa62bd _getPotentialConnectionForMailbox + 1052
7 com.apple.MessageFramework 0x99fa59e1 -[IMAPAccount connectionForStore:delegate:options:] + 288
8 com.apple.MessageFramework 0x99fa5819 -[LibraryIMAPStore connection] + 66
9 com.apple.MessageFramework 0x99fa54e7 -[LibraryIMAPStore openSynchronouslyUpdatingMetadata:] + 204
10 com.apple.MessageFramework 0x9a09c121 -[LibraryIMAPStore _fetchForCheckingNewMail:] + 47
11 com.apple.MessageFramework 0x9a09c223 -[LibraryIMAPStore checkNewMail] + 41
12 com.apple.MessageFramework 0x99fd31cf -[IMAPAccount fetchSynchronously] + 118
13 libobjc.A.dylib 0x90a5bd76 objc_msgSendv + 54
14 com.apple.Foundation 0x92801422 -[NSInvocation invoke] + 932
15 com.apple.MessageFramework 0x99f998d0 -[MonitoredInvocation invoke] + 128
16 com.apple.MessageFramework 0x99fa3914 -[InvocationQueue _drainQueue] + 517
17 com.apple.Foundation 0x927fa39c forkThreadForFunction + 123
18 libSystem.B.dylib 0x90024227 pthreadbody + 84 -
MacBook Pro, late 2011 version. Up to date Mountain Lion.
My email account in the Mail.app is set up as IMAP, but when I delete emails in the Mac Mail App, they are not deleted from the mail clients of the other devices that are connected to the mail server with IMAP. IMAP works perfectly between Windows Outlook 2010, iPad Mail App and Android default mail client. Deleted messages behave correctly, as in delete from one device and the mail is deleted from all devices.
Having just tested in reverse order on the Mac; emails deleted from the email client on Windows, iPad and Android are not deleted in the Mac Mail App. It appears that the account is behaving like POP rather than IMAP.
Any advice on how to have IMAP work correctly on the MacBook Pro Mail.app?
Thank you.Hi Csound1, thanks. The email host is 1and1.co.uk, however, i am going to fess up and make myself look like a plonker now -
the email account in question was set up in Outlook as POP - stupid, stupid, stupid me, wasted an afternoon on this! I have now changed the Outlook account to IMAP and Mail.app works perfectly - and looks much nicer than Outlook did. Im in the middle of converting from Windows to a Mac, and still finding my way around the Mac
The lesson learned, never assume - always double check! All my other email addresses with 1and1 are all imap, except this one, and it happened to be the first one I set up in the Mail.app. (bows head in disgrace!)
Thank you anyway for attempting to help me!
Cheers -
SSRS Subscription LastStatus "Failure sending mail: Failure sending mail."
SSRS 2012, SQL 2012 SP2.
We have about 50 different daily subscriptions that go out. In the last month or so, probably over 30% of SSRS subscriptions are getting this error and no e-mail is sent. I have tested out the reports with the parameters and the reports run just
fine on demand for both the user and myself. I'll change the subscription forward for testing, and it will intermittently work or fail even when no traffic is hitting our database so I dont think it's a matter of performance.
I see nothing in the error logs, and I see nothing in the logtable 2, or 3 in ssrs as suggested by a few MSDB sites.
The only spot I can even see this error, is when viewing the subscription. I have done LOTS of searching, and most people get a helpful error after "Failure sending mail" where as I only get 'Failure sending mail: Failure sending mail"Hi,
Does your network is always available? Your scenario is so strange. Please check if you have missed something according to this article:
https://msdn.microsoft.com/en-us/library/ms159155.aspx. -
SQL Server Reporting Services Subscriptions - Failure sending mail
Hello All,
I am having a problem with using subscriptions to send my reporting services report by email.
Getting the following error:
Failure sending mail: The message could not be sent to the SMTP server. The transport error code was 0x800ccc6d. The server response was 552 Error: message too large
While browsing for other reports in the report manager(reports created by others staffs), i could find that these reports were sent by email successfully.
So not understanding why mine has a problem. logically it could be that the report is too big?
Anybody has a solution or suggestion?
Thanking you in advanceHi LenitaS,
For first question, we can check the item "IncludeLink" to embed the link in the mail. Or, embed the link the manually by putting a link in the "Comment" field. The URL should be a standard URL Access:
http://<reportserver>/reprotserver?/reportpath&rc:format=<format>
For the second question, you are right. We can follow these setps to work around the issue:
1.Create a file shared subscription, save the export to a shared folder.
2.Create a E-Mail delivery subscription, embed the file's path in the mail. We can set the file's path in "Comment" field of the E-Mail delivery. The path should be someone like this:
\\<sharedfolder>\<export report>
In this case, the exported report's name cannot be dynamic.
If there is anything unclear, please feel free to ask.
Thanks,
Jin ChenJin Chen - MSFT -
Read the email using java mail api for Imap account which is secured SSL
hello,
I am trying read the new mails on my imap account... i am not able to connect to the imap account... could anyone help me out ..
below is the code
public class EmailImapGateway implements MessageCountListener{
private static final long serialVersionUID = 1L;
private Session session = null;
private IMAPStore store = null;
private IMAPFolder folder = null;
Properties props = new Properties();
public void ejbCreate() {
try {
if (session == null)
session = Session.getDefaultInstance(props, null);
if (store == null || !store.isConnected()) {
String host, name, passwd;
host = "host";
name = "user";
passwd = "passwd";
String SSL_FACTORY = "javax.net.ssl.SSLSocketFactory";
props.setProperty("mail.imap.socketFactory.class", SSL_FACTORY);
props.setProperty("mail.imap.socketFactory.fallback", "false");
props.setProperty("mail.imap.socketFactory.port", "888");
java.security.Security.setProperty( "ssl.SocketFactory.provider", SSL_FACTORY);
props.put("mail.imap.host", host);
props.put("mail.imap.port", "888");
store = (IMAPStore) session.getStore("imap");
store.connect();
folder = (IMAPFolder) store.getFolder("Inbox");
folder.open(Folder.READ_WRITE);
int t = folder.getUnreadMessageCount();
System.out.println("getunreadmessagecount is :" + t);
}catch (Exception e) {
e.printStackTrace();
} finally {
try {
folder.close(true);
store.close();
} catch (MessagingException e) {
e.printStackTrace();
public void ejbActivate() throws EJBException, RemoteException {
// TODO Auto-generated method stub
public void ejbPassivate() throws EJBException, RemoteException {
// TODO Auto-generated method stub
public void ejbRemove() {
// TODO Auto-generated method stub
public void messagesAdded(MessageCountEvent arg0) {
System.out.println("Message is added in inbox");
public void messagesRemoved(MessageCountEvent arg0) {
System.out.println("Message is removed from inbox");
it is not able to connect to my account
Edited by: bhavna84 on Sep 8, 2008 11:10 PM
Edited by: bhavna84 on Sep 8, 2008 11:20 PMYes, see my previous post.
He replied:
hello
In your code ur mention IMAP port 888
but by default its 143 so chk your server configuration for IMAP port no. -
SSRS: Failure sending mail: The transport failed to connect to the server.
I run SSRS and email reports using SMTP service on a Windows Server 2008 R2 box. This has been working for months and stopped today around noon.
I have checked all SMTP settings and verified they are correct. I can send an email from SQL Server Management Studio, using SMTP service with no trouble.
Now in SSRS I am getting this message:
Failure sending mail: The transport failed to connect to the server.
I have read every link when I google this message or type it into bing.com; yet cannot find a reason why SSRS has suddenly stopped emailing my reports.
I have restarted the server in question, I have changed account names, I have changed passwords, yet nothing is working.
I even approached our senior dba about it and he has never seen this happen.
Has anyone else experienced this issue?
Thank you,
JessicaThank you JJordheim.
IDS is not an issue. Neither is the Windows Firewall on the server. I actually turned it off while troubleshooting to make sure it was not causing the issue.
SSRS and my SMTP Virtual service are on the same server. I am running the SMTP service through IIS. I even created a new SMTP Service to test with. No luck.
My rsreportserver.config file looks fine, or at least it does to me. Posted below:
<Configuration>
<Dsn>AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAoroltqyZFk6Vi+2kNEmsQAQAAAAiAAAAUgBlAHAAbwBy
AHQAaQBuAGcAIABTAGUAcgB2AGUAcgAAABBmAAAAAQAAIAAAALMXYz8ommSjoJt2CZCuZmzmS+bo
5d4pT033TPn7WZoiAAAAAA6AAAAAAgAAIAAAAEmwCgTd0Xo4ssE0WGSo7KC3+nsOZd2sR/PT6hUQ
5SR44AAAAL4ReAnyjUBENbH63/qM8orgHrcG3s/MyNdjuBnfKhwlqauRfxwcNgjd7PtXLvS8gnBq
kTji38EuQHBOJ63rklEclaejzkcA45rAbzLqWBi7oftw1SwHahZQvp+zxFdKVuAGnhEjiKvcrgzl
ebfWNTjY/pjyJ9bwvF7vReIXrRXecPTjbE6wOiYFggY6pVCXvJCRvoUNMiLJC3PCIi58LOqVjPUO
juyIZUrNqTPZlhswNU0M+mM7W6YRqPtF+xXx1FBSe0PShD+29IgBOYBRFFfDbW93tbnw5nj5/xpk
I2GlQAAAAJoNASVS7KABbUZke+huE5HzjaXk1o7Sq9REu4Svlry1INKqJfo+dbGDWUAKEwbClVoO
RNs8QwPFYNIXyq6vDD0=</Dsn>
<ConnectionType>Default</ConnectionType>
<LogonUser></LogonUser>
<LogonDomain></LogonDomain>
<LogonCred></LogonCred>
<InstanceId>MSRS10_50.MSSQLSERVER</InstanceId>
<InstallationID>{e93dd46f-7646-44e2-9997-acc3cb001828}</InstallationID>
<Add Key="SecureConnectionLevel" Value="0"/>
<Add Key="CleanupCycleMinutes" Value="10"/>
<Add Key="MaxActiveReqForOneUser" Value="20"/>
<Add Key="DatabaseQueryTimeout" Value="120"/>
<Add Key="RunningRequestsScavengerCycle" Value="60"/>
<Add Key="RunningRequestsDbCycle" Value="60"/>
<Add Key="RunningRequestsAge" Value="30"/>
<Add Key="MaxScheduleWait" Value="5"/>
<Add Key="DisplayErrorLink" Value="true"/>
<Add Key="WebServiceUseFileShareStorage" Value="false"/>
<!-- <Add Key="ProcessTimeout" Value="150" /> -->
<!-- <Add Key="ProcessTimeoutGcExtension" Value="30" /> -->
<!-- <Add Key="WatsonFlags" Value="0x0430" /> full dump-->
<!-- <Add Key="WatsonFlags" Value="0x0428" /> minidump -->
<!-- <Add Key="WatsonFlags" Value="0x0002" /> no dump-->
<Add Key="WatsonFlags" Value="0x0428"/>
<Add Key="WatsonDumpOnExceptions" Value="Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException"/>
<Add Key="WatsonDumpExcludeIfContainsExceptions" Value="System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException"/>
<URLReservations>
<Application>
<Name>ReportServerWebService</Name>
<VirtualDirectory>ReportServer</VirtualDirectory>
<URLs>
<URL>
<UrlString>http://+:80</UrlString>
<AccountSid>S-1-5-19</AccountSid>
<AccountName>NT Authority\LocalService</AccountName>
</URL>
</URLs>
</Application>
<Application>
<Name>ReportManager</Name>
<VirtualDirectory>Reports</VirtualDirectory>
<URLs>
<URL>
<UrlString>http://+:80</UrlString>
<AccountSid>S-1-5-19</AccountSid>
<AccountName>NT Authority\LocalService</AccountName>
</URL>
</URLs>
</Application>
</URLReservations>
<Authentication>
<AuthenticationTypes>
<RSWindowsNegotiate/>
<RSWindowsNTLM/>
</AuthenticationTypes>
<RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
<RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
<EnableAuthPersistence>true</EnableAuthPersistence>
</Authentication>
<Service>
<IsSchedulingService>True</IsSchedulingService>
<IsNotificationService>True</IsNotificationService>
<IsEventService>True</IsEventService>
<PollingInterval>10</PollingInterval>
<WindowsServiceUseFileShareStorage>False</WindowsServiceUseFileShareStorage>
<MemorySafetyMargin>80</MemorySafetyMargin>
<MemoryThreshold>90</MemoryThreshold>
<RecycleTime>720</RecycleTime>
<MaxAppDomainUnloadTime>30</MaxAppDomainUnloadTime>
<MaxQueueThreads>0</MaxQueueThreads>
<UrlRoot>http://abraham/Reports</UrlRoot>
<UnattendedExecutionAccount>
<UserName></UserName>
<Password></Password>
<Domain></Domain>
</UnattendedExecutionAccount>
<PolicyLevel>rssrvpolicy.config</PolicyLevel>
<IsWebServiceEnabled>True</IsWebServiceEnabled>
<IsReportManagerEnabled>True</IsReportManagerEnabled>
<FileShareStorageLocation>
<Path>
</Path>
</FileShareStorageLocation>
</Service>
<UI>
<ReportServerUrl>
</ReportServerUrl>
<PageCountMode>Estimate</PageCountMode>
</UI>
<Extensions>
<Delivery>
<Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider,ReportingServicesFileShareDeliveryProvider">
<MaxRetries>3</MaxRetries>
<SecondsBeforeRetry>900</SecondsBeforeRetry>
<Configuration>
<FileShareConfiguration>
<ExcludedRenderFormats>
<RenderingExtension>HTMLOWC</RenderingExtension>
<RenderingExtension>NULL</RenderingExtension>
<RenderingExtension>RGDI</RenderingExtension>
</ExcludedRenderFormats>
</FileShareConfiguration>
</Configuration>
</Extension>
<Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider,ReportingServicesEmailDeliveryProvider">
<MaxRetries>3</MaxRetries>
<SecondsBeforeRetry>900</SecondsBeforeRetry>
<Configuration>
<RSEmailDPConfiguration>
<SMTPServer>192.168.11.210</SMTPServer>
<SMTPServerPort></SMTPServerPort>
<SMTPAccountName>
</SMTPAccountName>
<SMTPConnectionTimeout>
</SMTPConnectionTimeout>
<SMTPServerPickupDirectory>
</SMTPServerPickupDirectory>
<SMTPUseSSL>
</SMTPUseSSL>
<SendUsing>2</SendUsing>
<SMTPAuthenticate>
</SMTPAuthenticate>
<From>[email protected]</From>
<EmbeddedRenderFormats>
<RenderingExtension>MHTML</RenderingExtension>
</EmbeddedRenderFormats>
<PrivilegedUserRenderFormats>
</PrivilegedUserRenderFormats>
<ExcludedRenderFormats>
<RenderingExtension>HTMLOWC</RenderingExtension>
<RenderingExtension>NULL</RenderingExtension>
<RenderingExtension>RGDI</RenderingExtension>
</ExcludedRenderFormats>
<SendEmailToUserAlias>True</SendEmailToUserAlias>
<DefaultHostName>
</DefaultHostName>
<PermittedHosts>
</PermittedHosts>
</RSEmailDPConfiguration>
</Configuration>
</Extension>
<Extension Name="Report Server DocumentLibrary" Type="Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider,ReportingServicesSharePointDeliveryExtension">
<MaxRetries>3</MaxRetries>
<SecondsBeforeRetry>900</SecondsBeforeRetry>
<Configuration>
<DocumentLibraryConfiguration>
<ExcludedRenderFormats>
<RenderingExtension>HTMLOWC</RenderingExtension>
<RenderingExtension>NULL</RenderingExtension>
<RenderingExtension>RGDI</RenderingExtension>
</ExcludedRenderFormats>
</DocumentLibraryConfiguration>
</Configuration>
</Extension>
<Extension Name="NULL" Type="Microsoft.ReportingServices.NullDeliveryProvider.NullProvider,ReportingServicesNullDeliveryProvider"/>
</Delivery>
<DeliveryUI>
<Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailDeliveryProviderControl,ReportingServicesEmailDeliveryProvider">
<DefaultDeliveryExtension>True</DefaultDeliveryExtension>
<Configuration>
<RSEmailDPConfiguration>
<DefaultRenderingExtension>MHTML</DefaultRenderingExtension>
</RSEmailDPConfiguration>
</Configuration>
</Extension>
<Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareUIControl,ReportingServicesFileShareDeliveryProvider"/>
</DeliveryUI>
<Render>
<Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.DataRenderer.XmlDataReport,Microsoft.ReportingServices.DataRendering"/>
<Extension Name="NULL" Type="Microsoft.ReportingServices.Rendering.NullRenderer.NullReport,Microsoft.ReportingServices.NullRendering" Visible="false"/>
<Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering"/>
<Extension Name="ATOM" Type="Microsoft.ReportingServices.Rendering.DataRenderer.AtomDataReport,Microsoft.ReportingServices.DataRendering" Visible="false"/>
<Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer,Microsoft.ReportingServices.ImageRendering"/>
<Extension Name="RGDI" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.RGDIRenderer,Microsoft.ReportingServices.ImageRendering" Visible="false"/>
<Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false"/>
<Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering"/>
<Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering"/>
<Extension Name="RPL" Type="Microsoft.ReportingServices.Rendering.RPLRendering.RPLRenderer,Microsoft.ReportingServices.RPLRendering" Visible="false" LogAllExecutionRequests="false"/>
<Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRenderer,Microsoft.ReportingServices.ImageRendering"/>
<Extension Name="WORD" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordDocumentRenderer,Microsoft.ReportingServices.WordRendering"/>
</Render>
<Data>
<Extension Name="SQL" Type="Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.DataExtensions.SqlAzureConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="SQLPDW" Type="Microsoft.ReportingServices.DataExtensions.SqlDwConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="OLEDB" Type="Microsoft.ReportingServices.DataExtensions.OleDbConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="OLEDB-MD" Type="Microsoft.ReportingServices.DataExtensions.AdoMdConnection,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="ORACLE" Type="Microsoft.ReportingServices.DataExtensions.OracleClientConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="ODBC" Type="Microsoft.ReportingServices.DataExtensions.OdbcConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="XML" Type="Microsoft.ReportingServices.DataExtensions.XmlDPConnection,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="SHAREPOINTLIST" Type="Microsoft.ReportingServices.DataExtensions.SharePointList.SPListConnection,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="SAPBW" Type="Microsoft.ReportingServices.DataExtensions.SapBw.SapBwConnection,Microsoft.ReportingServices.DataExtensions.SapBw"/>
<Extension Name="ESSBASE" Type="Microsoft.ReportingServices.DataExtensions.Essbase.EssbaseConnection,Microsoft.ReportingServices.DataExtensions.Essbase"/>
<Extension Name="TERADATA" Type="Microsoft.ReportingServices.DataExtensions.TeradataConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
</Data>
<SemanticQuery>
<Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
<Configuration>
<EnableMathOpCasting>False</EnableMathOpCasting>
</Configuration>
</Extension>
<Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
<Configuration>
<EnableMathOpCasting>False</EnableMathOpCasting>
</Configuration>
</Extension>
<Extension Name="SQLPDW" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQLADW.MSSqlAdwSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
<Configuration>
<EnableMathOpCasting>False</EnableMathOpCasting>
</Configuration>
</Extension>
<Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
<Configuration>
<EnableMathOpCasting>True</EnableMathOpCasting>
<DisableNO_MERGEInLeftOuters>False</DisableNO_MERGEInLeftOuters>
<EnableUnistr>False</EnableUnistr>
<DisableTSTruncation>False</DisableTSTruncation>
</Configuration>
</Extension>
<Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
<Configuration>
<EnableMathOpCasting>True</EnableMathOpCasting>
<ReplaceFunctionName>oREPLACE</ReplaceFunctionName>
</Configuration>
</Extension>
<Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.QueryExecution.ASSemanticQueryCommand,Microsoft.AnalysisServices.Modeling"/>
</SemanticQuery>
<ModelGeneration>
<Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
<Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
<Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
<Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
<Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.Generation.ModelGeneratorExtention,Microsoft.AnalysisServices.Modeling"/>
</ModelGeneration>
<Security>
<Extension Name="Windows" Type="Microsoft.ReportingServices.Authorization.WindowsAuthorization, Microsoft.ReportingServices.Authorization"/>
</Security>
<Authentication>
<Extension Name="Windows" Type="Microsoft.ReportingServices.Authentication.WindowsAuthentication, Microsoft.ReportingServices.Authorization"/>
</Authentication>
<EventProcessing>
<Extension Name="SnapShot Extension" Type="Microsoft.ReportingServices.Library.HistorySnapShotCreatedHandler,ReportingServicesLibrary">
<Event>
<Type>ReportHistorySnapshotCreated</Type>
</Event>
</Extension>
<Extension Name="Timed Subscription Extension" Type="Microsoft.ReportingServices.Library.TimedSubscriptionHandler,ReportingServicesLibrary">
<Event>
<Type>TimedSubscription</Type>
</Event>
</Extension>
<Extension Name="Cache Refresh Plan Extension" Type="Microsoft.ReportingServices.Library.CacheRefreshPlanHandler,ReportingServicesLibrary">
<Event>
<Type>RefreshCache</Type>
</Event>
</Extension>
<Extension Name="Cache Update Extension" Type="Microsoft.ReportingServices.Library.ReportExecutionSnapshotUpdateEventHandler,ReportingServicesLibrary">
<Event>
<Type>SnapshotUpdated</Type>
</Event>
</Extension>
</EventProcessing>
</Extensions>
<MapTileServerConfiguration>
<MaxConnections>2</MaxConnections>
<Timeout>10</Timeout>
<AppID>(Default)</AppID>
<CacheLevel>Default</CacheLevel>
</MapTileServerConfiguration>
</Configuration> -
Dear All,
I am using MSSQL SSRS 2008.
All the reports run properly when viewed via a web browser. However for subscription, I am having a strange
experience.
The subscription having intermitten failure. I need to execute multiple times to get it work.
Following is the exception I am getting:-
Failure sending mail: The user or group name 'xxxxx' is not recognized.Mail will not be resent.
Failure writing file DailyPolicyExportCDN_ST@timestamp : The user or group name 'xxxxx' is not recognized.
Following is the exception I retrieve from log files.
webserver!ReportServer_0-2!1b0c!07/31/2014-05:25:09:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeClientDisconnectionException: A client has disconnected from the Report Server Web service application
domain ReportServer_MSSQLSERVER_0-2-130512716074991980. No corrective action is required. An error code has been submitted to ASP.NET to release the connection. The error code is 800708CA. ---> System.Runtime.InteropServices.COMException: This network connection
does not exist. (Exception from HRESULT: 0x800708CA)
Any idea what went wrong?
Thanks in advanceHi NeoCK,
According to your description, you can access your report successfully, but it fail to send e-mail subscription. Right?
In this scenario, since you can access the report successfully, so this user has permission on report server. Please go to E-mail setting in your Reporting Services Configuration Manager, check if the current user has permission on that SMTP server.
If this is still not working, please recreate the subscription and try again.
Reference:
SUBSCRIPTION
ERRORs : Failure sending mail: The user or group name 'CB_OFFICE\XXXX' is not recognized.
The user or group name 'MYDOMAIN\myuser'
is not recognized
SSRS
2008: Failure writing file ... The user or group name 'domain\user' is not recognized
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Reporting Subscriptions Failing - "Failure Sending Mail". Must be something obvious!
I've spent the last few hours on this and cannot for the life of me figure what it is that I have overlooked. I have created a report email subscription, nothing particularly fancy. It is always failing on:
Failure sending mail: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.1 Client was not authenticated
The setup:
SCCM 2012 R2
SQL Server 2012 (on the SCCM server)
Exchange 2010
SCCM - Email Notification Component is configured correctly. The SMTP test works and I also receive alerts when one of my SCEP rules are triggered. All good.
SQL Management Studio - DataBase Mail is configured; sending a test e-mail works. Using Basic Authentication with a network account specified.
Exchange 2010 has a Receiver Connector created to relay e-mails from the SCCM Server.
Reporting Services Configuration Manager - Email Section has been completed.
Can anyone point me in the right direction?Hi Garth,
Thanks for the response. I was under the impression that CM12 uses SSRS (and thus the SQL Mail configuration) to send out the Subscription Reports, if that is definitely not the case I can eliminate that part from my configuration all together.
So, to clarify:
CM12 Alerts have always been working fine - no issue here and I understand this is a different kettle of fish to SSRS.
<cite class="ipb" style="padding:0px 10px 8px;border-width:0px 2px 2px;border-left-style:solid;border-left-color:#989898;border-bottom-style:solid;border-bottom-color:#e5e5e5;border-right-style:solid;border-right-color:#e5e5e5;font-weight:bold;font-style:normal;overflow-x:auto;margin:-1px
-12px 8px;width:1299px;display:block;-webkit-user-select:none;background:-webkit-gradient(linear, 0% 0%, 0% 100%, from(rgb(246, 246, 246)), to(rgb(229, 229, 229)));">Quote</cite>Why do you think that SSRS can send test message, where did you do this action?
I actioned the "Send Test E-mail" option when you right-click on the Database Mail option within SQL2012. However, as you pointed out already, if this has absolutely
nothing to do with the Subscription Reports configuration, then this is no longer relevant. If anything it just proves that e-mails can be sent via the Exchange server (using basic authentication).
Now, I guess, I just need to figure what within SSRS Configuration Manager is missing, my trouble is that there isn't any detailed settings I can configure
and Exchange logs doesn't indicate anything that isn't already reported by SCCM:
2014-06-25T14:09:14.168Z,Exchange\SCCM01 - Subscription Reports Receiver,08D15B57A7508DA3,21,10.2.2.202:25,10.2.2.213:63905,>,530 5.7.1 Client was not authenticated, -
Is it possible to delete message in the server using Mail configured using IMAP?
Is it possible to delete message in the server using Mail configured using IMAP?
Currently when I delete the message in Mail, the server still keep a copy of it, which means it is not deleted on the server. I know that POP can do this but I still want the option of being able to access it from other computers.
My server has only a small size, so I hope that I can just delete it from my Mail instead of having to log in to the server and delete it again.
Thank you.yxchng wrote:
Is it possible to delete message in the server using Mail configured using IMAP?
Yes, but doing so will remove it from everything else. -
Does Mail automatically seek IMAP settings?
Does Mail automatically seek IMAP settings over POP?
I'm having ongoing probs with IMAP with Sky and it's Google inspired webmail and I have tried the POP settings but nothing happens, just get the ~ next to the account.
I have asked Sky why their POP settings dont work [waiting for a reply] but every time I have created a new account Mail seems to seek the IMAP options first.
If Mail does default to IMAP, is there a way that I can create a new account and me tell it which type of account to define?Basically I want to do the reverse of what is discussed here.
-
How Can I Turn OFF Junk Mail Filter for IMAP Accounts Only?
I am trying to figure out how to turn off the Junk Mail filtering for IMAP accounts such as .Mac/.ME and GMAIL. All filtering is working fine on the server side, and reviewing the mail that is tagged is easy enough by just going to the account and displaying the folders created on the server.
I've checked the Junk mail pref and although the Advance settings let you isolate specific accounts to check, it does not give you the option bypass checking an account.
i.e.
if <Any> of the following conditions are met:
<Account> <is not> <Gmail (IMAP)>
As is, the mail rules are working perfectly on the server side, but in Apple Mail, many mails are being sent the Apple Mail's Junk folder.
When going through the Gmail's instructions on setting up a Gmail account for Apple Mail, it specifically says to turn off Junk mail filtering for the account, but I can't find any options to do that.
Any help or suggestions would be greatly appreciated.
TIAI haven't tried this, but it should work:
Make a new rule,
If <Any> <Account> is <Gmail> or <Account> is <.me> then "Stop evaluating rules".
Move this rule to the last in the list of rules.
In the Junk Mail preferences, be sure that "Filter junk mail before applying my rules" is unchecked. -
TS3899 How do you change ios 8 mail default from imap to pop?
I scan e-mails on the road with my iPhone but only respond to emergent ones. I work all non-emergent e-mail at home on my PC. With iOS 8 software, my iPhone e-mail defaults to IMAP, which causes any e-mails read/opened on my phone to be automatically deleted from my PC's incoming mail. That may be fine for some, but not for me... and I'm guessing a lot of other folks who have the same parallel mail arrangement.
My work-around is to archive all e-mails read, which I want to keep, and then resend them to myself when I get home. What a bother. With a pop account, all devices receive, send, and delete independently of each other. That allows me to scan and delete unnecessary e-mails on the iPhone and work those I want to keep when I return home. Yes, I have to delete unwanted e-mails again, but that is not a big deal.
The iOS software update needs to allow a pop, pop3, or IMAP incoming server option. If it does, I'm unable to figure it out.The response that suggests putting in a dummy e-mail works perfectly with the new iOS 8 software. Thanks for the help. I now have my phone configured back to a pop vice IMAP.
Incidentally, this all started when I noticed that a lot of my iPhone memory was being used to store some 500+ phantom e-mails that had already been deleted. An iPhone forum string indicated that I needed to delete my email account and then reinstall it. I did so and the phantom emails disappeared... but then my account locked into the IMAP format.
Thank you again for the help.
javelin123, aka Mike -
Mail 4.2 does not delete mail from the server when, while in Mail, I move an e-mail from an IMAP folder to a local (on my laptop) folder. When I check mail again, the message is downloaded again.
Sometimes, but not always, if I have read a message, the message is reflagged as unread when mail is checked.
When using a slow internet connection, such as in a hotel or a clients conference room, mail does not download new messages from my IMAP server. It does download new messages from an Exchange server.
I have none of these problems when I use Thunderbird 3.0, so the problem is Mail and not my server.
I do not use GMail or any of the other canned IMAP servers. My IMAP accounts on are a virtual FreeBSD server from Verio.
Applecare support thinks this is a bug, but I suspect that is the standard way of saying I don't know.Count me as another person seeing the issue where IMAP moves aren't "sticking".
I connect my Mail to an MS Exchange server at work, and for the past 2 weeks, my move operations on messages aren't committing to the server. If I switch over to Entourage or Outlook Web Access, the moves will stick.
For example, I mark a message as Junk, which is supposed to then move the message to the Junk folder. I navigate away from the Inbox to another folder, and when I come back, the message that I'd marked as Junk is back in the Inbox. This happens for all folders, not just Inbox, by the way.
I've tried synchronizing, I've tried the Rebuild command. I've even trashed my Envelope file and let that rebuild cleanly. No joy.
Very frustrating to have to open another mail client in order to do mailbox cleanup all the time. -
hey guys, just setup my mail app for IMAP with gmail after a fresh format / install and i dont have a junk mail icon (nor can i mark email as junk).
never had this problem in 10.5 ..
i can drag msgs to the 'spam' folder under [Gmail], but i cant just click "junk" or anything because there is no option for junk.
thanks for any help =/Hello, and welcome to the Discussions.
I have Junk Icon available on all my accounts including my Gmail one. Have you looked in Mail Preferences/Junk Mail to see if it is enabled?
Ernie
Maybe you are looking for
-
How to set a new DocumentBuilderFactory in my application?
Hello Suners, I really need some help to set a new DocumentBuilderFactory in my application. I have a new instance of DocumentBuilderFactory with my settings and i need to set it in the application so that it use it to show some special DOM elements.
-
HP 4622 All in One Printer: Problem with Printer or Ink System
Problem with Printer or Ink System Error OXC19a0027.
-
Hello folk, It´s my first post here! I Hope that I can help us in question and ask! I have a dificult to alter table command. I think that I do nothing wrong, follow the command: ALTER VIEW desenv_pw.PRCR_MCVW903_CSP_DIM (CSP, DESCRIPTION) AS SELECT
-
Repair Permissions in Single User Mode
So, I have searched various posts and have yet to find anything that has worked so far. Hopefully, someone can still help. I recently made the mistake of changing my permissions on my hard drive. I clicked "Get Info" for the Boot volume and changed t
-
Hi all!! I'm using a BOE XI 3.1 SP2 with Apache Tomcat Was, in a Windows 2003 VMware image... I'm having problems starting tomcat.... It's really slow... and I don't know what to do. I've tried to modify the tomcat configuration, adding more maximum