Faint red banding on NTSC playback of DVD from DVDSP4

I have completed a single-layer DVD-R. It plays back fine on both NTSC displays and computers, with the exception that the NTSC playback seems to include faint red banding in the full black screens.
The banding slowly moves upward, almost like a traditional TV is slightly mistuned. I originally thought there was something wrong with the mpeg encoding of the feature, but on further inspection I found that the banding also occurs during the transition from the menu to the movie (and continues over any part of the movie that displays solid black; only over the black). This banding cannot be seen over any other colors.

I've been doing some research, and I thought this might be one of those IRE setup issues, but from what I've read, it looks like if it were an IRE issue, my video on the dvd would appear washed out and brighter, not darker. Again, it looks great on 2 set top dvd players I've tried, as well as the built in apple dvd player on the powerbook screen. On two other set-top boxes, it appears dark and muddy.
It sounds like it may be DVD Player or television set-up related. If it behaved the same way on each player/tv then it could have been related to encoding settings, gamma etc. - did you double check the set-ups to make sure?

Similar Messages

NTSC & PAL Widescreen DVD from Flash Animation

Hey Everyone. I have a question regarding a project I am finishing up. I created an animation in flash that is being exported to both NTSC Widescreen DVD and PAL Widescreen DVD.
I started with 1024x576 in flash and created a sweet animation with audio. (Its a 1 min animation that will be looped for conventions etc)
For NTSC
From Flash I exported a 853x480 animation and imported it into FCP to add some fades to the beginning and end and make a few tweaks. I exported out another 853x480 video and imported it into DVDSP set to NTSC Widescreen. I burned the disc and everything looks great on my screen (letterbox on my crappy home tv)
For my PAL version I followed a similar process.
From Flash I exported a 1024x576 animation and imported it into FCP to add some fades to the beginning and end and make a few tweaks. I exported out another 1024x576 video and imported it into DVDSP set to PAL Widescreen.
The thing I noticed is that the video in the viewer seems stretched where as the NTSC looked perfect.
Am I missing something here? Where did I go wrong. Should i have set the video size smaller in FCP and outputted the proper video size (NTSC 720 x 480 and PAL 720 x 576) to bring into DVDSP? I don't know why one would look ok and the other would look stretched.
Any help would be appreciated. Thanks
Fish

Fish:
Try this in FCP:
PAL VIDEO
- Select Easy Setup DV PAL
- Create a new sequence and open it
- Go to menu Sequence > Settings...
- Change Quicktime Video Settings Compressor from DV-PAL to uncompressed 8 bit
- Check the anamorphic option
- Import your movie and make it fit the canvas (check the Distort option in the Motion tab)
- Do your edit
- Export your timeline as Animation.
Same for the NTSC but using DV NTSC Easy Setup and so . . .
If I don't missed something your movies must be fine in DVDSP.
Hope it helps!
Alberto

Playback of DVDs from HDD

Hi Everyone,
I would like to rip all of my DVDs to a HDD and then play them from my Mac as if they were phisical discs inserted into the drive. The ripping is not an issue, I have the video_ts and audio_ts folders which contain the full DVD contents. When I load DVD player and open the video_ts location, everything plays fine, as if I had placed a disc in the drive.
What I would like to do is to be able to create one icon that i can click to load any DVD and for the OS to see it as if it were a disc.
Is this even possible?
Thanks,
Chris

You are running an older version of the OS, new videos are geared towards faster machines. Are you running the latest version of Quick Time that will work on your computer?

How to create a PAL DVD from a NTSC camera

Hi,
I have a Canon HF10 which I have bought in the US, so it is a NTSC camera. I am living in Europe, so I would like to create a PAL dvd from the footage which I have recorded.
The footage have been shot using 1080/24p and I have imported it into iMovie. Do I need to do something extra or can I just export it and burn an dvd from iDVD?
Best regards
Henrik.

Henrik Skak Pedersen wrote:
.. The frame rate is 30 which is a surprise because I recorded it at 24.
no surprise.. the ccd of you device is read-out 24p, but the camera records upsampled in 30i ..
24p on consumer devices is mostly marketing blabla..
in Europe, a 25p more is more interesting..
you have a NTSC device. full stop.
in iDVD, set prefs to 25fps (=PAL), relaunch iDVD, import iM project..
so, you record in 24p, got 30i on tape, anc convert again in 25i (=PAL) ... happy landing..
aside: better results in standards-conversion with free app JES Deinterlacer ...

How to make an NTSC DVD from Pal & NTSC videos using CS3

Hi!
I am on CS3, on Windows.
I need to create an NTSC widescreen DVD from footage that is both NTSC and PAL. Also some of the footage is 4:3 and some 16:9.
What would be the best way to accomplish this.
I created an NTSC widescreen project in Premiere CS3. Imported all footage and arranged on timeline.
While exporting to Encore or to Media Encoder for MPEG 2 DVD - I am constantly getting the error "Failed to return video frame". Or "An unexpected error occured." I am unable to burn even and AVI. I have confirmed, that all audio and video clips are exact duration and that there is no gap between frames on timeline.
I am able to successfully burn most of the clips individually (except one from about 20 + clips) - but fails when I export them togetether.
I am racing against time, I have very tight timeline, I need to get it done today :-(
I would appreciate help from experts on:
1) What could be causing this error - how can I fix it?
2) Is the workflow I am using (combining all clips as they are), the way to go - or do I need to do something before I combine/export them for NTSC Widescreen DVD.
Thanks.
Rene

I think you are starting on the wrong track with this, if your source video is a DVD disk then you should not be converting it to anything. You just need the raw mpeg video from the dvd itself. a dvd consists of VOB files but they are really just mpg files with different header information. In most cases you can even rename a .vob file to .mpg and play it with any media player program.
Anyways you should go download this free program: http://www.svcd2dvd.com/VOB2MPG/default.aspx
It's a great little simple utility, you point to your video_ts folder and it will export the vob files for each title into a solid .MPG file which you can import into premiere and edit any way you would like. without wasting time or quality encoding to a different medium codec.
I will say that CS4 is much better at handling mpg files then CS3 if i remember correctly, but see how it works for you.
Good luck!

HT4060 Cannot get iPad 2 charged beyond 1%. All charging ports tried: AC adapter(s), USB 2 port on MacBook Pro. ITunes shows iPad only for a few seconds. iPad displays alternately: Apple logo, battery w/slim red band, then battery w/1% charged informatio

Cannot get iPad 2 charged beyond 1%. All charging ports tried: AC adapter(s), USB 2 port on MacBook Pro. ITunes shows iPad only for a few seconds. iPad displays alternately: Apple logo, battery w/slim red band, then battery w/1% charged information. How can I get it to charge beyond 1% so I can proceed to troubleshoot?

I have had your exact problem with my old 3GS, now I cannot even get it to turn on, I still see that it is supposed to be charging though, but it never charges any so it seems.
I replaced the Lower Dock Connector Assembly back when it still charged while hooked to my PC, and it found it made no real difference.
http://www.amazon.com/gp/product/B003Y5YXLK/ref=oh_details_o05_s00_i00?ie=UTF8&p sc=1
At this point I am not sure if I should replace the battery and hope for the best, or just junk the phone, I cannot really sell it if I cannot reset it...

Output to NTSC format for DVD

Hi,
I am from the UK, I filmed some DVCAM footage in PAL format, but bringing it into FCP to output onto NTSC and onto DVD for a Canadian conference / Broadcast.
Can i simply change my project and capturing settings to
get the footage to run at NTSC (even though it was filmed in PAL?)
And if i want a UK edit of the film do I need to recapture all my clips at PAL settings or can this be done via the DVD output???
cheers
Chris

Sadly no its not that simple not so much because the image sizes differ but more because of the difference in frame rates.
Your options after you input edit and master in PAL
Convert to NTSC using a transfer house
Convert to NTSC using Compressor (can be slow)
Convert to NTSC using Nattress' plug-ins (will cost you money but they work)
http://www.nattress.com/Products/standardsconversion/standardsconversion.htm
Convert to NTSC using JES Deinterlacer (free and works)
http://www.xs4all.nl/~jeschot/home.html#DEI
This will give you an NTSC Master to compress for DVD

How do I convert iphoto slideshow for playback on dvd player

how do I convert iphoto slideshow for playback on dvd player

Roxio's Toast is one such.
http://www.roxio.com/enu/products/toast/titanium/overview.html
regards
TD

Echo problem during playback on DVD player.

Hey,
I exported my edited movie from AP CS3 onto my computer. I recorded my audio in a fairly large room, so I expected to get some echo.
Anyways, the export on my computer is fine. Sounds great, for stereo sound, everything is fine. When I author a DVD and play it in my player, or with an entertainment system, the voices and sounds echo so badly, that it distracts from the film.
I'm not sure what's going on, as it's quite fine on my computer.
Can anyone help me out? The file on my computer is a H264 video codec with AAC sound. When exporting to DVD from premiere, it's a MPEG 2 something or other.
It sounds like the Stereo tracks have been layered on each other or something. Quite bad echo.
Thanks.

Best guess is that your computer speakers just aren't up to the task of correct audio playback, that the other system has greater dynamic range and allows better audio fidelity.
That's not surprising, most computer speakers aren't sufficient for proper audio monitoring.

Playback movie burned to DVD from iPhoto

When I burn a movie to a DVD from iPhoto I get an error message on playback that says "the movie contains an invalid data reference and will not playback". Any suggestions?

Also, the movies don't appear on the DVD when I play it in the DVD/Blue Ray in the other room.
You can't burn a DVD like that with iPhoto. You need an authoring application like iDVD or Toast to correctly format the disk.
Regards
TD

Burning PAL dvd from NTSC FCP 6 project?

I need to burn a European market PAL dvd sample from a NTSC project. I've done this before for a European film festival, but it was a very hit or miss process.. Basically, back then, I mixed the project down as both PAL and NTSC files, then burned every combination of NTSC and PAL format DVDs (PAL file/PAL dvd format, NTSC file/PAL dvd format, PAL file NTSC format, and NTSC file/NTSC format).. I expected the PAL/PAL to work, but it didn't. In fact, I seem to remember that one of the combos that I least expected to work actually did.. maybe the NTSC/PAL disk (can't remember for sure)
Will someone please advise me as to the correct way to burn the NTSC project, such that it will be playable an European PAL format machines?

If you need a true PAL dvd, you need to convert your ntsc quicktime to a PAL quicktime using either compressor or something like graeme Natrresses standard conversion plug in. You will also need to recreate your dvd menus and reauthor the dvd.

Can Encore make a Pal DVD from NTSC source?

Can Encore make a Pal DVD from NTSC source?

Convert NTSC <--> PAL http://forums.adobe.com/thread/995779
Regions and NTSC vs PAL http://forums.adobe.com/thread/951042

How to I burn an imovie for playback on DVD?

I'm brand new to MacBook and imovie. I created a movie burned it a DVD, but it won't play on my DVD player. What is the correct process for burning an imovie project for playback on DVD player?

If you like to make DVDs, give iMovie 06 a try.
I use both iMovie 08 and iMovie 06, if I want to make a DVD I prefer iMovie 06. iMovie 08 is not as DVD friendly as iMovie 06.
iMovie 08 has replaced "Share to iDVD" with "Share to media browser". Also iMovie 08 cannot set chapter markers, this has to be done with another program.
When using iMovie 06, one mouse click will set a chapter marker EXACTLY where you specify. In just a few seconds set all your chapter markers. When you are done editing just "share to iDVD 08" and all of your chapter markers will be there!
iMovie 06 and iDVD 08 is a terrific combination.
Apple includes iMovie 06 as a free download to iLife 08 owners. (THEY WANT YOU TO HAVE IT!)
http://www.apple.com/support/downloads/imovieHD6.html

Qosmio G30-E10: No Playback of DVD`s with "Toshiba HD DVD Player"

Hi all,
If I try to playback a normal DVD (not a HD-DVD) with the Toshiba HD-DVD Player Software, I get the following message from the HD-DVD Player:
"This player has no DVD Playbackfunction. Please try an appropriate application for DVD playback"
HD-DVD Drive has current firmware. HD-DVD Player is on current patchlevel 4.20.16.
DVD-Playback with InterVideo WinDVD works fine!
Notebook is a Qosmio G30-E10, with Vista Ultimate (Factory standard).
Any ideas?
Thanks in advance.
Sincerely
Uwe

Hello
Have you ever ask yourself why Toshiba install two players on this HD-DVD notebook? Probably not.
With short words: HD-DVD player is designed for playing HD-DVD movies only. For watching usual DVD movies use DVD player. For this purposes use WinDVD player.
Bye and enjoy your great Qosmio notebook.

Problems with playback of dvd on another dvd player

When I playback a dvd I've created, once in awhile I'll get a little stutter in the picture and sound. Not too often, but it occasionally happens. If I reverse the dvd picture to somewhere just before the stutter and play again, there is no stutter.
I'm thinking it is an issue with the dvd player and not the burned dvd itself. Am I correct or could it be something else?

Need more info on the DVD Player like brand and model number.
Also what media are you using?
Might be as easy as using a quality DVD Lens cleaner kit from Maxell or 3M.
SDMacuser

Faint red banding on NTSC playback of DVD from DVDSP4

Similar Messages

Maybe you are looking for