Falcon with nokia car kit not muting radio?

Just got a 2007 XR6 falcon with a nokia car kit already fitted. The cable plugs in to my phone and when done the radio flashes up "media" but when a call is received  or made the radio doesn't do anything. Could this be because the model of phone I have, it's a cheap 6131 or just something I'm missing?
Cheers 
Craig

Check that the phone software is up to date. It sounds like the phone is holding the audio channel open and not realeasing the mute quickly enough.
*#0000# will display what version you are running.
You can update software on pcsuite but remember to back up the phone contents first.
www.nokia.com/pcsuite

Similar Messages

  • IPhone 4S not working with TomTom Car Kit

    Hi,
    I have the TomTom car kit for 3GS and have just upgraded to iPhone 4S.
    I have one of the iPhone 4 adaptors from TomTom for the car kit, but even with this on, and trying some of the other suggestions online about a strip of velcro, I cannot get the cradle and the iPhone 4S to work together.
    Has anyone with a 4S managed to use it with the car kit?
    Thanks,
    Graz.

    Hi All
    Right, this is what worked for me;
    I had a iPhone 4 running ios 5 and all was fine. Since upgrading my to 4s my TomTom car kit wouldnt regognise the new phone.
    Remove the iPhone 4 adapter (retangular stick on thing that comes with the kit specifically for the iphone 4)
    turn it over so it is facing the wrong way. You should still have enough stick left behind on the kit itself to stick on again - must be the wrong way around!!
    Job done!!
    Works a treat

  • 9630 does not connect with Bluetooth Car Kit Speakerphone

    Whenever I try to make a call with my Motorola T215 Car Kit Speakerphone, my BlackBerry 9630 Tour "smart"phone says, Connection to Motorola T215 failed.  I have followed the pairing instructions that came with the car kit precisely and repeatedly, but still get the same result.  To add even more enjoyment to my experience, my connection with the Bluetooth device seems to go on and off as it pleases.  I figure the only way to put an end to this issue is to smash it with a hammer, but if you know of another solution, I would appreciate it.  My carrier is Sprint, and OS version is 4.2.0.285. 

    The first thing I would suggest doing it running an upgrade on your device software. To do this you will need your USB cord and access to the internet.
    Go to: www.blackberry.com/update and then follow the prompts to update your device software.
    This should back up your device data automatically, but to be save incase of any situation that may arise do a backup of your device through the BlackBerry Desktop Software.
    Once the update is done, test the Bluetooth connection.
    Hope this helps.

  • Nokia Car Kit Adapters

    Hello,
    We currently have Full Nokia Car Kits installed for the Nokia 6310i.
    We have now moved to the Nokia 6021 (as we can't get the 6310i's anymore) which has a different connector and so does not work in the existing Car Kits.
    I have been told that Nokia do different Phone Cradles, called the 7 Series (?) which can the swapped or slotted onto the existing cradles so the 6021's then work in the existing Car Kits (speaker / Mic / Charger).
    Can anyone offer any help on what we would need to do to use the 6021's in the 6310i's Car Kits.
    Cheers
    Ian

    You can buy an adaptor cable CA-55 which will allow you to fit a CR-23 cradle and will work ok with your existing CAR-K91 car kits. I would however advise you look at upgrading your kits to CK-7W car kits which will cost you a few quid more but will be compatable for the future where as the above option has limited uses and features and can be unreliable.
    Hope this helps
    Danny b
    Nokia Accredited Installer
    If my answers help you, give me a Kudos. Its like a pat on the back.

  • Nokia car kit - aerial connection

    I have a professionally fitted Nokia car kit for my E50. I'm changing my phone and thought all I had to do was change the cradle .... not so. The cradle has an external aerial lead that links to the inbuilt roof aerial on the car ( Saab ), but this cable is hardwired into the cradle and runs in behind the dash where I guess it connectes to the cars system. So I'm faced with pulling out the dash just to change a cradle.
    Is there any other option here ? Are there inline aerial connectors I could use which would allow me to descretely cut the cable and link it to another cradle suitable for my new handset .
    Andrew

    Thanks for the replies folks.
    Some more info that should have included in the original post.
    The car is a Saab 95.
    I'm in the UK
    The car kit is a Nokia CK-7W.
    The new phone will be a Nokia 6500
    I'll have a look at the dash and see if its in any way similar to the 93. Maybe access is easier than I think.
    But another question I'm afraid. The CK-7W wiring loom connects into the base of the cradle and is the same multi pin plug that would connect directly into the E50 phone. If I get a new cradle for the Nokia 6500, I assume the connection into the base of the cradle is going to be compltetely different ?
    Andrew
    Message Edited by mccaba on 25-Jun-2008 06:54 PM

  • E61 with 610 Car Kit

    I have found a issue between my Nokia car kit and E61 Phone, when disconnected with the car kit 610 the phone will not show SMS message, missed calls, reminders, I have firmware version 2.0628.06.05 apart from this issue, the car kit and phone work fine. The only way I resolve the issue is to reset the phone after using car kit, issues with firmware or bug look like

    This is an issue, Nokia should answer!
    I am very much interested in the solution, because my desicion for a mobile phone depends on the compatibility with my NOKIA 610 car-kit. I will not change my car-kit.
    Marthan
    Message Edited by Marthan on 11-Jan-2010 10:03 PM

  • N70 compatability with 610 Car kit

    Can anyone help me to pair N70 with 610 car kit. I have installed the download programe onto the phone and that seems to be running Ok, but the 610 cannot see the phone. all BT settings have been double checked,

    Hi there,
    I also found out that N70 does not support SAP - unfortunately after I bought it - which is a shame to my opinion for a state of the art phone. I actually got pretty **bleep** of with Nokia because I bought the Nokia 616 and the N70 together as a thought so "Business Combination".
    I cannot understand why there is no update available to solve that problem. Or did anybody hear something new?
    Cheerz,
    Marcel

  • Connecting 6822 to TomTom via Nokia car kit

    I am trying to connect my handset to my TomTom sat nav and can get the two units to connect via Bluetooth, but not if the handset is in the holster, when the Bluetooth connection does not work.
    At a guess, the holster/car kit is not Bluetooth enabled but can anyone confirm this? If so, is my only option to replace the holster?
    Thanks in anticipation.

    15-Jul-200707:41 PM
    iano1966 wrote:
    i have a saab 93 with a nokia car kit fitted.
    i was using a 6230i but have replaced it with a e65.
    i bought a brodit holder as the e65 would not fit in the old holder(mbc-15s).the cable attaches and the phone shows as been attached to the car and it even charges, but when i use the phone the sound does not come out via the speaker system as before and i cant use the roof microphone neither.
    As soon i re-attach the 6230i the car kit works fully again, including the mic/ speakers.
    I am doing something wrong?............any ideas please?
    I don't drive so I'm going to ask probably what seems like a stupid question to you ....
    Are you using a cable or Bluetooth to connect to the in car kit ?
    If you're using Bluetooth then chances are the system you're currently using is incompatible with the E65 at the moment as the E65 wasn't around when the 6230i was created The good news however is that a fix MAY be available if the vendor has updated the firmware to resolve this.
    If you're using a cable then I would check to see if there's a new cable for use with the E65. According to Nokia you can use the same cable (CA-53) to connect to both the 6230i and the E65 - but that is for phone to PC. Your cable *MAY* be slightly different.
    Regards,
    Edward

  • Nokia car kit CK100 install help Audi TT 2003 conc...

    Hi 
    As per subject line. I have Nokia car kit CK100. And require install help for Audi TT 2003 concert radio & Bose. What additional wire harness do i need?
    I'm seeing lots all over ebay and the internet... And getting confused. And is it a simple as buying the lead and plug & play??
    Getting contradicting advice, some say as it bose it needs to be hooked up to the fuse box etc....
    Any help appreciated....

    More information as to what is required upon Page 148 of this resource:http://www.armourauto.com/sites/armourauto.com/files/AUTOLEADS_CATALOGUE_HandsfreeFittingSolutions.p...
    Have to say in UK would approach Nokia Accredited Carkit Installer to get it right first time!
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Nokia Car Kit Nokia MBC 15S chanfe for 6220 phone

    I have a Nokia car kit fitted with a Nokia MBC 15S cradle which fits my old phone Nokia 6230i is it possible to fit a new cradle for my new phone Nokia 6220 or do I have to replace the whole kit incliding all the cables?
    Any help greatly appreciated.
    Steve

    Hi davehsuperstar
    You might like to look at installation guide here to give you an idea whether the CA-27 Data cable runs to the CK-7W:http://nds1.nokia.com/files/support/apac/phones/guides/Nokia_CK-7W_APAC_UG_en.pdf
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Existing Nokia Car Kit MCC4 & N95 8GB phone

    Hi,
    I've bought a car with embedded Nokia Car Kit MCC4, which was designed for old Nokia 3310 & 3330 phones. I have Nokia N958GB.
    Can I use the existing connectors (with adequate adapters of course) and expect that I can use the car kit as expected?
    I was planing to use existing wires and make some changes:
    1. HOLDER: replace the phone holder with one taht fits my new phone
    2. CHARGER: plug in charger adapter to fit new standard
    3. AUDIO: plug in 2,5mm female to 3,5mm male stereao audio jack adapter
    Thanks.

    Thanks for you interest. I'll inform you abaout all I discover about this little hack.
    For now, I have difficulties to find the audio cable adapter in my country (prety rare in Serbia).
    This is it:
    http://www.amazon.com/Female-Adapter-Accessories-Electronics-Computers/dp/B000RHMO96
    or:
    http://www.tangshop.com/35mm-to-25mm-adapter.html
    Leastways I'll make that adapter by hand, or combine few elements to derive the wishing one
    Best regards,
    Vladimir Stefanovic

  • I have car charging problems,my 4s won't charge with tomtom car kit,my old 3GS worked fine,tried a belkin charger had same problem

    I have car charging problems,my 4s won't charge with tomtom car kit,my old 3GS worked fine,tried a belkin charger had same problem.
    Any ideas I'm pulling my hair out !!!

    Seems to be a hardware issue and you'll have to get it checked by visiting an Authorized Apple Service Provider, an Apple Store , to see if other 3rd party charger will work at their place.
    iPhone - Contact Support - Apple Support

  • Nokia Car Kit compatibility

    I have just updated from a 6610i to a 6230i and was told by my service provider that the new phone was comatible with my 12 month old car kit.
    When I received the new phone I had the error message "enhancement not supported" when I phoned my service provider I was informed that a CA55 cable would do the trick. I contacted Nokia before buying the cable and was told this cable would not work, in fact there was not any other phone that would work with the phone kit I have. I feel a bit agreived that the car kit is now rendered useless, having had it for only 12 months.
    Check with the phone provider about compatibility before changing your phone rather than rely on your service providers information.....

    I assumed, but shouldn't have, that because I had the kit fitted at a reputable auto electricians, that because the phone holster was a Nokia that the rest of the kit would also be Nokia. When I removed the main box of the kit I found that it was not a Nokia part. I have now got a proper Nokia kit and this works fine, although not bluetooth I got it at a good price, so it should be good for 12 months till my next upgrade. Next time I'll not assume!!!!

  • Nokia N8 with Nokia Belle does not recognize heads...

    My headset (WH-701) is no longer recognized by my nokia N8 after I had updated to nokia belle. I first have to put my headset into the 3,5 mm AV connector before being recognized, and even then the headset may stop working after a few minutes. Once the headphone is working I still cannot make use of the (music)buttons on the headset (louder, softer, next, previous, etc.) Please can someone help with this problem? There must be a solution for this? I am using the headphones every day.
    I know that already started on several topics, but Nokia has still not responded to this problem!
    Thanks in advance for your help 

    hi there mate,
    if you are having problems with your phone, you can try checking via the phone itself or via Nokia Suite, if there are any firmware updates available, and to please update to the latest version offered. If there are no updates, try re-installing your current firmware, and if that doesn't work, then Restoring to factory settings. Failing that, perform a three-finger hard reset and if that doesn't work either, then you will need to take your phone to your local Nokia Care point for them to inspect.
    to locate local Nokia care: http://nokia.com/support
    Remember to backup all personal data first

  • E61i with Bluetooth car kit - How do make calls wi...

    Hi, I have a new E61i and find most things spot on but find I can make and receive calls through the car kit while its connected fine. My problem comes when the phone goes into the locked mode after the set period of time.
    At this point, although I can still receive calls I am unable to make them through the kit. It shows its trying to dial out then come up straight away with call ended. Unlock the phone and it all works again.
    With a full function car kit now not working 100% its a bit frustrating!! I have tried most of the settings within the bluetooth section of the phone, e.g. the remote SIM mode, but still no joy.
    Any help would be great.

    OK, I solved this for myself after much playing about with the menus and settings. Why oh why is their no direct support from RIM without haveing to purchase a support package?? This is clearly a topic that should be covered in the intruction manual sent out with the ohones, anyway this how to do it in case anyone has the same problem.
    1/ Make a bluetooth pairing.
    2 go to "options", press OK
    3/ go to "Networks and Connections", press OK
    4/ go to "Bluetooth Connections" press OK
    5/ select the paired device and press OK
    6/ select "Full Menu" press OK
    7/ select "Options" press OK
    8/ scroll down to "Services and deselect the tick in "SIM Access Profile"
    9/ Press return and select "Save" press OK.
    The phone now works perfectly with my built in car kit.
    Sirely it is about time phone and car manuefacturers got together to develop a system that works on all car kits.

Maybe you are looking for

  • PLD - Mais de um layout

    Olá Pessoal, gostaria de saber se é possível imprimir mais de um layout a partir de um documento de marketing, sem a necessidade de mudança do layout padrão. Exemplo: nota fiscal do cliente e romaneio de carga. Grato, Leonardo Azevedo.

  • Cannot Open Adobe Reader X/XI

    Currently experiencing issues with Adobe Reader X/XI.  Organization wide problem. Adobe Reader X/XI is not starting/opening at all. Information: Adobe Reader X/XI 64-Bit with update 11.0.0.5 Windows 7 Event Viewer doesn't show any application error l

  • [E71] short message list doesn't show in the activ...

    I have managed in the past to get the active screen to display the headers of the new messages in one the mailboxes but right now, I can't figure how to do it. I've played with the enabled applications in the modes, with the email set-up but so far w

  • How do i connect printer over network to macbookair

    Hi I have a macbbok air with mountain lion os, and am trying to connect an epsonsx130 printer throught my d link (sky) router. I have been through the print n scan method, but my p[rinter does not show, no matter how amny times I have tried. Any sugg

  • Passing a paremeter from URL to a form

    I am running a single form from URL. http://100.180.127.225:7779/forms90/f90servlet?form=test1.fmx where test1.fmx is the name of teh form. Now this form is is showing all the records of the customers. since it is a customer information form. Now i w