Falla antena inalambrica PC C260

Buenas tardes, anteriormente ya nos ha pasado en 2 ocasiones lo mismo  la solución era formatear pero no podemos estar así cada vez que pase esto, parece que la falla pasa cuando se actualiza el windows 8, la antena de internet no enciende y solo puedo acceder a internet por medio del cable de ethernet.
Les agradecería que por favor me ayudaran a solucionar este problema

Hola gabyph que tal,
Actualizar te refieres ha? que actualiza a Windows 8.1 o una actualización mas del sistema.
Si es relacionado a un actualización mas del sistema cabe la posibilidad de que se instala otra versión del controlador, para ver la versión presiona teclas Windows + administrador de dispositivos adaptadores de red, aparecerán tus dos tarjetas la ethernet y la Wifi para ver la version da clis sobre la de la WIFI escoge en la pestaña controlador, suponiendo que el problema sea por eso puedes instalar la versión de fabrica e instalarla, sigue el enlace http://support.lenovo.com/es/es , de ser esto el siguiente paso seria que tu escojas las actualizaciones, pero primero descarta lo que comento.
En administrador de dispositivos también podrás observar si es que tu WIFI solo esta des-habilitada o existe problemas con el controlador:
En el caso que este des-habilitad debe aparecer con una flecha hacia abajo (la WIFI), de ser así clic derecho sobre ella habilitar, si existe problema con el controlador debe aparecer un símbolo con un signo de admiración , en ese caso aplica lo que comento mas arriba.
Puede suceder también que solo este apagada la WIFI desde las configuraciones de Windows, atajo presiona teclas Windows+ i /cambiar configuración de PC/wireless verifica si tu Wifi esta apagada.
Ultima opción no para todos los modelos pero existe la posibilidad que en la BIOS exista una configuración de encendido/apagado del WIFI, poco probable que suceda a menos que tu lo has cambiado, pero se puede pensar en ello en tu no has intervenido y esta este apagada.
Un saludo.
@Antony_Vamu
Comunidad en Español  English Community  Deutsche Community  РусскоязычноеСообщество
Mis Lenovo: Y560p,Z580,Z500 touch,S920,T400,G50-70 ,Soy voluntario no trabajo para Lenovo, las opiniones expresadas por mi no representan a Lenovo, no se responde a preguntas de manera privada debes crear un nuevo tema, números del centro de llamada Lenovo Aquí , reglas de participación del foro Aquí , si encontraste solución a tu problema marcarlo aceptándolo como solucionado!!!!!

Similar Messages

  • Will Apple give me a new iPhone4 bumper if the free one I received last year is falling apart from taking it on and off every night to charge phone?  Without the bumper, Iphone4 is defective because of antenna problem and I shouldn't pay for new bumper.

    Anyone able to get another free bumper from Apple.  Iphone4 is defective without it. 

    I am on my third Apple supplied bumper in little more than a year - they just wear out from norrmal use, I am NOT taking it off the phone.
    Apple paid for the first one as an acknowledgement that they have a problem with the phone - therefore they get to supply replacements if the bumper they supply fails.

  • IPhone 4 Bumper damages antenna steel band

    Hello,
    I'm opening this topic because the Apple support system doesn't really offer me any decent method to ask Apple what to do.
    I've got two issues: First, the Bumper I ordered during the case program is falling apart. The rubber comes off the plastic on all sides and by now it doesn't even stick to the phone anymore. How do I ask Apple for a replacement without having to send the phone in? Because that's really the only option the support system is giving me. Sadly, there's no Apple Store in reach of where I live.
    But there's another problem: Apparently, the Bumper damages the antenna steel band around the phone. I noticed several shiny spots and lines on the matt steel, which really doesn't look good. It's a little bit disappointing that a product that's meant to protect the phone actually seems to damage it. What's up with that? Anyone experienced something similar and/or can tell me what to do? Should I just post a repair order and send the phone in?
    Thank you in advance for any advice.

    I agree with you, almost, I believe however Apple is at fault in the design of the bumper.
    I've had a black bumper since day one, before the antenna problems even surfaced. I too have noticed the marks to the steel band.
    If you inspect the bumper itself, the flexible rubber is affixed to a hard plastic frame. It's this plastic frame which is effectively polishing the stainless steel band (admittedly with the addition of foreign material) through movement between bumper and phone.
    My previous 3GS had a silicon case all its life, it too would have been subject to the same ingress of foreign material, it however did not mark the case in the slightest.
    Its a poor design and I for one wish I'd never fitted it.

  • Broken airport antenna female plug?

    So, my airport t-antenna's needle plug broke. I replaced it with a wire safety pin. Worked wonerfully. The wifi connection was just as good, and it was cheaper than spending $40 on a new t-antenna.
    Unfortunately, today, I knocked it out accidentally and now when I place it back in it just falls out. It's loose. It doesn't hold itself in. And even when I hold it in, it doesn't pick up a signal. I have no idea what's wrong.
    Is there any way I can fix it?

    buy a USB WiFi adapter, make sure it is compatable with your version of OS,  cheaper faster more efficient than airport.

  • Serious antenna problem!

    With the external antenna a lot of people are having signal issues. If you hold the phone in a way that, your hand covers or touches all three sections of the band, the signal just falls almost instantly. It's terrible and probably the reason for the bumpers.
    I mean, why would you really need to protect stainless steel!?
    I have a cell tower literally yards away from my house and can destroy all 5 bars by holding it a certain way.
    Is everyone having this problem!?
    Message was edited by: RyanGSXR

    This is probably the most scary video:
    http://www.youtube.com/watch?v=03PQyWp0mWE
    Obviously this IS a widespread issue. Apple SHOULD respond and acknowledge it. And it's not something where people SHOULD have to buy a case simply to use their device.

  • Need a little help with antenna selection for a COW

    Hello fella's...
    Ok, so I've gotten myself a little confused here and would like some recommendations.  We are ordering new COWs (Computer On Wheels) for the hospital and they will be using an Intel 6205 Wireless Chip which is a/b/g/n 2x2.  The two new floors these devices will be going on will be our first internal hospital entry into 802.11n which I force the clients to run in the 5ghz range for N.   Previous to this, all of my cows are G clients and use a 2.2dbi rubber duck for 2.4ghz.   I will be using 1142 AP's, if not 3502 and no I have not performed a survey yet as the floor is still in early construction, but equipment is required to be ordered now.  I can tell you that I will be surveying for a voice grade.  I suppose my confusion comes from what is the best antenna (obvious open ended question) for this card, being it has two connectors for the 2x2.  Again, typically I would use a 2.2 dbi rubber duck for either 2 GHz or dual band 2/5 GHz.  Is dual rubber ducks at 6inch spacing (half wavelength met on 2.4 GHz fall back) suffecient or are there other factors involved with the N.
    Thanks,
    Raun

    I guess I'm under the impression that if you put a dual band antenna on a device, regardless wether it's a 2.4 radio or 5GHz radio, that the antenna would work, as it's well, dual band.  Am I wrong in that assumption leolaohoo?
    I have heard back from wyse today with a little information on their provided antenna, but no radiation pattern.  This antenna would be referred to as the 'rubber duckie' style 'dipole'.  I'm not really having much of a choice as it stands now, as I am limited on space(height) to place the antenna and time (chinese new year for manufacturer).  However, one other question. I note that the 1142 and 3502's are horizontally polarized and this omni is vertically polarized.  With my limited understanding of antenna's, that's not a good thing... what is the typical associated 'cost' of a vertical to a horizontal?
    •1.      Electrical Properties
    1.1 Frequency                             2.4GHz ~ 2.5GHz ;4.9GHz~5.825GHz
    1.2Impedance……………………50 Nominal
    1.3 VSWR …………………………1.92 :1Max.
    1.4 Return Loss……………………-10 dB Max.
    1.5 Radiation………………………Omni-directional
    1.6 Gain(peak)………….………… [email protected]~2.5GHz
    [email protected]~5.825GHz
    1.7 Polarization……………………Linear; Vertical
    1.8 Admitted Power………………1W
    1.9 Cable……………………………RG-178 Coaxial Cable
    1.10 Connector…...…………………SMA Plug Reverse
    2. Physical Properties :
    2.1 Antenna Body……………. ……TPE
    2.2 Antenna Base……………. ……PC
    2.3 Antenna Base……………. ……PBT
    2.4 Operating Temp. ………………-10 ~ +60
    2.5 Storage Temp. …………………-10 ~ +70
    2.6 Color …………………………Black

  • Why can I get several HD channels in HD on my rooftop antenna, but the not on Fios?

    Why can I get several HD channels in HD on my rooftop antenna, but not on Fios?
    E.g. WABC, WNBC, WLIW and WNET come in at least 4 HD channels via my rooftop antenna but only one WLIW (non-HD) on Fios.
    Bummer.
    I can switch from the RF to HDMI sources but I thought with all of the channels I could at least get the ones I watch.
    I'm located in Northern NJ USA, about 10 miles (line of sight) from NYC.

    Rumplestiltskin wrote:
    Why can I get several HD channels in HD on my rooftop antenna, but not on Fios?
    E.g. WABC, WNBC, WLIW and WNET come in at least 4 HD channels via my rooftop antenna but only one WLIW (non-HD) on Fios.
    Bummer.
    I can switch from the RF to HDMI sources but I thought with all of the channels I could at least get the ones I watch.
    I'm located in Northern NJ USA, about 10 miles (line of sight) from NYC.
    I assume you get the NJ versions of those channels? 
    Networks pay for exclusive programming rights within specific markets. Cable operators are only allowed to offer a specific set of local channels within their designated media market (DMA).  If you aren't considered to be in the NYC market, then you aren't supposed to receive those channels.
    Like many in the DC area, I can pickup the Baltimore locals with an antenna, but I as I live in the DC DMA, those are the only channels I receive from Verizon, Comcast, DirecTV, etc.  Note there are circumstances where a customer might fall between two markets, living in an area with overlapping DMAs; in that case, the provider can choose to offer two different sets of locals.  Verizon FiOS does do that in some areas.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

  • Antenna mounting question - AIR-ANT2506

    I was told by a wifi tech that the "pipe bomb" antenna [air-ant2506] should be installed upside down when installing inside a building, ie warehouse.
    When I go to the hardware installation page for the antenna, Cisco makes no statement regarding this....they clearly show the antenna with the metal end at the bottom, not top.
    http://www.cisco.com/en/US/docs/wireless/antenna/installation/guide/ant2506.html
    Ultimately does it really matter which end is up if you are mounting inside? Just as long as it's vertical correct?

    You are right.... as long as they are verticle you should not have any issues. The reason why they might ask you to face it downward is due to code in some area's..... code sometimes states that there will not be any objects facing upward.... just in case someone falls. So it is more of a safety aspect.

  • IPhone 5 cases that affect antennas i.e. reception?

    Anyone know of any cases for the iPhone 5 that affects the reception or output of the antenna signal? Please reply if you have any info or types of cases that fall into this category.
    Thanks

    Hi, i didn't hear about this before!
    Regards
    www.hupix.com

  • My iphone 4 has droped on ground.,nd frm that day am  getting  signal problem,...!!!there is error of "No Service" or "Searching",...is this coused bcoz of dat damage of iphone my falling n da ground...!!! i came to know dat there is a problem on IC signa

    My iphone 4 has droped on ground.,nd frm that day am  getting  signal problem,...!!!there is error of "No Service" or "Searching",...is this coused bcoz of dat damage of iphone my falling n da ground...!!!
    i came to know dat there is a problem on IC signal antenna,....!!!
    what is the cost of repairng it....!!!
    nd is dat problem occured due to it falling n da ground...!!!

    actually my mobile has no waranty,...!!!nd am using a UK mobile in India,...!!!
    can u plz say dat ,is da signal problem( 'No Service' 'Seaching') is caused due to da damage of the mobile....???
    but,my mobile's outer look was so clear,there is no outer damage for it,...!!!

  • Repair of wireless antenna mac mini

    i've got an ebay project mac mini early 2009, where the guys dog pulled the wire off the back of one of the antennae.does anyone have a link to picture showing it correctly soldered (on back).
    I found the correct replacement fom mac components..
    it says
    151339-1rev5
    056-2763-15
    631-0686-15

    correct method: under a microscope I soldered the old lead to the antenna tab (which comes through from the back. I used a VOM to ensure continuity from the pin ut to the antenna solder tab..if you got a resistance your connection is sound. I also ground the back to the sheath (as it was connected under microscopic exam.)
    The sheath conection to the antenna back also acts as a cable relief to ensure no issues or stress to the cable solder tab.Then after ensuring all was well with the continuity; I applied a drop of 5 minute epoxy; ensuring the assembly wont get stressed and fall apart.
    Works perfectly now, guess I answered by own question. However a steady hand, a good solder unit, good tin-silver electronic solder, and a microscope were an absoute necessity.

  • Any Ideas on a how to falling snow?

    I have a image that I would like to make a little snow
    falling over it. As a amateur rookie at flash, I'm looking for a
    tutorial or some generous genius to explain how a dummy could do
    it?
    thks

    try my GG strew component, no any script required
    Sample
    Download

  • WRT54G V7 Left antenna output is not working.

    Hi,
    I had a new WRT54G V7 and discoverd that the left antenna (facing the front of the device) is giving no output. The right-hand version is working properly.
    Now I received a RMA and it is still the same! Already upgraded to v7.00.1, but without success.
    I know that I have to use both antennas, but if one of them is giving no output, what is the point?
    Anyone the same experience?
    Thanks and regards,
    Rob.
    Message Edited by Rob040 on 08-29-2006 12:17 PM
    Message Edited by Rob040 on 08-29-2006 01:08 PM

    Hi, before configuring the router I removed both antennas to prevent getting access from or to another device.
    After configuration I placed only one antenna, went one floor down to check connection with my laptop and was surprised that the laptop could not find the router.
    Took the laptop upstairs, placed it nearby the router and got a connection. Walking away with the laptop showed me that the signal was very poor (lost connection in the next room, seperated by a brickwall).
    Then I swapped the antenna to the right-hand connector and saw a very strong signal, also downstrairs. (My previous router, a WRT54G v2.0 did give the same strength on both antennas).
    I use the original firmware, so I cannot see  or change anything (at least I do not know how) to adapt antenna settings. Or is there a hidden field that I do not know of?

  • TS1702 When I update to IOS6 on my 4S Facebook does not work properly, the news feed never updates it only says no new storeys and shows a picture of an antenna. When I reset my phone and go back to IOS5 Facebook works fine. What's up with IOS6 ????

    When I update my iPhone 4S to iOS six Facebook does not work properly the newsfeed doesn't load properly and I can never see what's going on all I see is a picture of an antenna and a little thing underneath it says no new stories when I reset my phone back to iOS 5 then it works just fine and I don't have any issues so there must be something wrong with iOS six that isn't letting Facebook load properly

    No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
    <Edited By Host>

  • TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

    My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

    - After charging for 1/2 hour or so, does iTunes see the iPod?  If yes, restore the iPod from backup.
    - If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

Maybe you are looking for

  • Variable Offset not working in BI 7.0

    Hi , I am facing an issue with variable offsets in queries in BI 7.0. I created simple keyfigures with variable offset for fiscal year period with -1,-2,-3...etc to show different periods but I am getting 0 values for the same. Just to inform, we are

  • Doesn't display images

    When using Safari on a Mac many times an image in an email or on facebook doesn't load, just a small icon in the middle of a box of a small blue box with a question mark in it.  I have had an Amazon.com email load their header and graphics in the bor

  • Slide Timing / Advancing Question

    Hi All, I'm relatively new to Captivate (using version 6) and I've been looking all over to find an answer to this question. Basically, I am creating an interactive user guide, and I have certain slides with clickable buttons that display text captio

  • Captivate will not run in IE 7.0

    The published html file will not run in IE 7.0. You can see the frame of the file, but nothing displays.

  • Extracting Backups Sets from ASM with RMAN (10g)

    If I backup my database to my flash recovery area in ASM using RMAN, can I then extract those backup sets from ASM and turn them into normal file system files? I think I read that you can do this but I just wanted to be sure. I don't need super detai