Fallas tecnicas Agente Mozila de informe de fallos

Cordial greeting
Mozila SIRS, I am writing to report a fault which I presented to be sailing in the Mozilla browser, the error code is:
bp-b3b4e236-a7c7-4f65-bae2-e62ba2141005
I hope their directions to solve the presented fault.
Thank you.

''The failure occurred when the team had state of suspension.''
Please give us more information. What was Firefox doing when it
crashed? Are there other crash reports? Have you had problems
with Firefox of late?
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences'''<Enter> in the address bar
Select '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Similar Messages

  • SRM7 WF Fall Back Agents

    I would like to configure the fall back agents for the 'Manager of Manager' shopping cart approval process to be the originating users manager.  Not all departments in our organization have multiple levels of management but we would still like a second level of approval when the shopping cart amount is greater than 50K.  It works when there are multiple managers defined in the org structure, but I get an Agent Determination error when there is only one manager defined.  
    Is there a quick way to do this? 
    Thanks
    Jon

    Saravanan,
    I figured out how to get it to determine the originators first level manager and direct the work item there. 
    The business requirement is for carts over $50K there needs to be a director level approval.  In most cases in our organization, the director is the second level manager so the manager of manager agent determination process works perfect.  However some departments have one manager/director and only three employees so there is no organizational second level of approval that can be used.  In these cases, the manager is the director and needs to approve the cart twice.  Using the fall back agent method seems the best approach for these occurances.
    Jon.

  • Agent Dashboard - system information

    Hi,
    In WebIC, when you click on date&time displayed on bottom right corner, an agent dashboard pops up.
    In CRM 4.0 or 5.0, SID along with client is visible in WebIC Agent Dashboard. This is very useful to let you know in which system you are working on, especially when you have multiple clients in DEV or QA.
    Unfortunately, in CRM 2007 I haven't been able to see this SID & client information.
    I came across SAPNOTE 972520, but our system already contains this note.
    Is there a configuration required somewhere to define what information should be visible in "system information" part of agent dashboard?
    Any help would be appreciated.
    Regards,
    Kaushal

    Seems like SAP has switched methods in class CL_CRM_IC_SYSTEM_INFORMATION
    For getting system information they used method SYSTEM_INFORMATION_TO_STRING
    Now they are using method DETERMINE_SYSTEM_INFORMATION which doesnt contain the SSID any longer, only the domain.
    You can check this in page AgentDashboard.htm of component IC_BASE
    line 109 (depending on system status)
    Best regards
    Michael

  • Anyone know who I can file a complaint with about customer service agents giving wrong information

    I am a fairly new customer with Verizion and I have been having THEEE WORST time with simply cashing in on a offer that was offered to me! I want to file a complaint on the representatives that have sent me into the store on blank missions and also about the store representatives that did not help or show any empthathy what so ever. I am to the point of cancellation at the price of $700.00 for two lines of service but I will pay. This is how disapointed I am with my service. I came over from SPRINT under the impression I would at the very least have better CUSTOMER SERVICE if not BETTER PHONE SERVICE. This has not been the case and no one at VERIZION TAKES OWNERSHIP. I am in Human Resources/ CUSTOMER SATISFACTION at (removed) and I am also on the Board of Directors for (removed) and if any of these things would have gone down with my reps they would be reprimanded. I am completely disguested with the miscommunication I have experianced as well as how the leadership staff has handled this situation. I am problably going back to SPRINT and paying the cancellation fee with VW due to dissatisfactio if things do not start to look up.
    Private info removed to protect privacy.
    Message was edited by: Admin Moderator

    mzkwht13 - You'll need to send a Follow request (located in the upper right-hand corner on their page) to AntonioC_VZW that they'll have to accept.  They, in turn, will need to send you a Follow request that you'll have to accept.  Once you both are Following each other, then you can send them a Direct Message.
    How To: Direct Message

  • No phone service; Trying to update information in repair work order

    The only thing on this website that works is posting this forum and reading my bill. I have no phone service since last week and opened a repair work order. I am now trying to check status and update my contact # in that request. I had to buy a cheap prepaid phone at Best Buy so we had phone service at home and would like to provide that number in the work order. All I get when trying to check status of repair is a gateway error as the proxy server cannot communicate upstream. So if a Verizon tech reads this forum please send me an email so I know what is going on. I do not have enough minutes on my pre paid phone to stay on hold for hours trying to get through to a human. I tried that all week using a phone at work.

    Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases".  You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information.  This should be checked on a frequent basis  as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

  • OEM 12c  Agent does not show down status.

    Hi, I'm testing EM 12c. I added host target to oem and then kill agent process on host.
    When open agent page (Setup-Agent-Testingagent) see error.
    Communication between the Oracle Management Service host to the Agent host is unavailable. Any functions or displayed information requiring this communication link will be unavailable. For example: deleting/configuring targets, uploading metric data, or displaying Agent home page information such as Agent to Management Service Response Time (ms).
    But status agent and host show up in EM.
    I try resync agent, But nothing has changed it.
    ./emctl status agent
    Oracle Enterprise Manager 12c Cloud Control 12.1.0.1.0
    Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
    Agent is Not Running
    Other target (hosts,agent) show status correctly.
    Thanks for help.

    EM is showing Host is up makes sense. If I remember correct the OMS pings the host if the agent is down. This will succeed so the host will show up.
    Why the agent is showing up does not make sense to me. The agent sends a signal every (default) 120 seconds. If no signal is received by the OMS the OMS sends a reverse ping to the agent. If this does not succeed the agent and its monitored targets should get the state “Agent Unreachable”.
    Eric

  • Shady depot service and customer service agents

    I bought a U400 back in March, refurbished from Lenovo's outlet site. When I received it I noticed that the touchpad scroll option was not functioning, nor were some of the hot keys (touchpad on/off and CD eject). Under warranty, I sent it in to be fixed and received it back with the same issues. As a student I couldn't afford to send it back a second time.
    I sent it back this month since I am on break, however, and thankfully...I checked my depot status and realized that my PC was on hold because some repairs were not covered under my warranty.
    I called...and the people told me that my laptop was damaged and could not fix my touchpad unless I paid $180 to get it fixed. They could not tell me WHAT was broken though. The only damage that I know of is an unnoticeable impression on the top of my laptop which is where the LCD monitor lays. According to one agent, there are wires behind the LCD screen which connects to the touchpad. I checked on this forum where someone replaced their LCD screen and behind the screen...no wires where my impression is...
    They said they would email the technicians to fix the touchpad regardless of the damage done.  Next day...the status changed and that I have denied repairs and my laptop will be sent back shortly...
    I called...again...and talked to more agents who still could not tell me exactly what the damage was.  Finally some agent "found" a picture attached to my case number. She sent me this picture: http://tinypic.com/r/8zi342/6
    I definitely did not send my laptop that way. The agent then escalated the issue and told me that my laptop would be fixed along with the damages. I spoke with someone today to change the address where my laptop is being sent and he mentioned that he never heard of a laptop being damaged (which I believe is total BS since there are posts and inquiries about lost laptops and mysterious damages on this forum...). He also kept stressing that lenovo will not cover physical damage to the computer and would not comment on whether or not lenovo would fix this due to a fault of the carriers...which makes me feel very uneasy on whether or not they will fix this for me.  I asked if there is nothing about my laptop being fixed on the comments...and he said that the issue has been escalated and basically he is not at liberty to say if my laptop will be fixed or not...since from his experience he never had to deal with a device being broken during shipment.
    I just want an update and I don't want my laptop sent back to me with damage that would have never happened if I never sent it to be repaired.  Also...this issue with the touchpad and hotkeys has been an issue since the day I received my laptop.  Under warranty I feel like I should be granted those repairs.  

    Hi TerryJo,
    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

  • Agent determination position/ rule

    HI Gurus,
    I am new in workflow. For our project we have created a org structure. Which has O-S-US.
    There are only two positions Agent and Lead Agent.
    If I want to send an workitem to lead-agent I can send it to the position. But as our business will be maintaining the org structure they want an option that in case if any user is not assigned to the Lead-agent it should inform the workflow initiator.
    Do I have to use a rule, or how I do that Please help. Any other better way to do it?
    I promise I will reward every helpful answer.
    With thanks
    Rabbi

    I think you have to evaluate the agents by using a method. In side the method you need to check whether any agent is maintained in the Org. Unit if not you have to put WF_INITIATOR as the agent.
    The method will return the agent ID(SAP User Id) concatenated with US in front.
    Thanks
    Arghadip

  • Implementing Multi-agent system ..??

    Hello,
    I have to build a multi agent system for information retrieval from a blog portal.. now the problem is that i'm not able to decide which agent library should i go for.. there are so many of them available ..jatlite, jade, aglets etc..what do u think is fine?
    pls reply.
    thanks

    please can any one help me?

  • FIM 2010 Management Agents usage

    Hi all,
    we have implemented some FIM management agent that read information from different AD forest and the write email contacts into a destination forest. I looking for a tool, or powershell cmdlets I can use to export management agents errors.
    I try to explain better, ope FIM Syncronization Service, click on operations button, select the row that reports errors and in pane below show erros details and informations. In my case DistinguishedName for the object that encountered errors. I would
    like to export this rows to have a list with all the Distinguishedname and the use that with a script to manage and resolve the issues. i hope to have explained my needed.
    Thanks in advance for your help.
    Regards

    Hi!
    You can get this info from FIM sync with WMI.
    $maName = "AD-MA"
    (Get-WmiObject -Namespace "root\MicrosoftIdentityIntegrationServer" -class "MIIS_ManagementAgent"| where {$_.name -eq $maName}).RunDetails().returnvalue
    You will have to pick what you want from the xml but this should get you started.
    /Robert
    Thanks Robert,
    well I try to ask again for more information: :)
    Running your script I retrieve:
    <?xml version="1.0" encoding="utf-16"?>
    <run-history>
     <run-details>
      <ma-id>{AFB1D87E-1580-488F-9F2A-8A382FF4B14A}</ma-id>
      <ma-name>MA_SI</ma-name>
      <run-number>282</run-number>
      <run-profile-name>Delta Sync</run-profile-name>
      <security-id>DOMAIN\user</security-id>
      <step-details step-number="1" step-id="{4550BF08-A3E1-40D4-854E-546C44FBE016}">
       <start-date>2014-04-16 05:10:26.320</start-date>
       <end-date>2014-04-16 05:10:43.310</end-date>
       <step-result>completed-sync-errors</step-result>
       <step-description>
        <step-type type="apply-rules">
     <apply-rules-subtype>apply-pending</apply-rules-subtype>
    </step-type>
    <partition>DC=fqdn,DC=fqdn,DC=fqdn</partition>
    <custom-data>
     <adma-step-data><batch-size>100</batch-size><page-size>500</page-size><time-limit>120</time-limit></adma-step-data>
    </custom-data>
       </step-description>
       <current-export-step-counter>0</current-export-step-counter>
       <last-successful-export-step-counter>0</last-successful-export-step-counter>
       <ma-connection>
       </ma-connection>
       <ma-discovery-errors>
       </ma-discovery-errors>
       <ma-discovery-counters>
       </ma-discovery-counters>
       <synchronization-errors><import-error cs-guid="{F56B20AE-8EA3-E311-A7B3-005056A80FB6}" dn="CN=NAME,OU=Contacts,OU=Resources,DC=fqdn,DC=fqdn,DC=fqdn">
     <first-occurred>2014-04-15 22:20:32.657</first-occurred>
     <retry-count>3</retry-count>
     <date-occurred>2014-04-16 05:10:38.847</date-occurred>
     <error-type>extension-dll-exception</error-type>
     <algorithm-step>provisioning</algorithm-step>
    <extension-error-info>
     <extension-name>MVExtension.dll</extension-name>
     <extension-callsite>provisioning</extension-callsite>
     <call-stack>Microsoft.MetadirectoryServices.ObjectAlreadyExistsException: An object with DN &quot;"CN=NAME,OU=Contacts,OU=Resources,DC=fqdn,DC=fqdn,DC=fqdn"&quot; already exists in management agent &quot;AD_CF&quot;. An object with
    targetAddress smtp:[email protected] already exists, Contact for ObjectName from CAN NOT BE CREATED
       at Mms_Metaverse.MVExtensionObject.Microsoft.MetadirectoryServices.IMVSynchronization.Provision(MVEntry mventry)
    </call-stack>
    </extension-error-info>
    </import-error>
    </synchronization-errors>
       <mv-retry-errors/>
       <outbound-flow-counters ma="AD_CF" ma-id="{58020956-DC2A-4C09-9DF1-296778D4788E}">
     <provisioned-add-flow detail="true">1</provisioned-add-flow>
    </outbound-flow-counters>
       <staging-counters>
        <stage-no-change detail="false">0</stage-no-change>
        <stage-add detail="true">0</stage-add>
        <stage-update detail="true">0</stage-update>
        <stage-rename detail="true">0</stage-rename>
        <stage-delete detail="true">0</stage-delete>
        <stage-delete-add detail="true">0</stage-delete-add>
        <stage-failure detail="true">0</stage-failure>
       </staging-counters>
       <inbound-flow-counters>
        <disconnector-filtered detail="true">2711</disconnector-filtered>
        <disconnector-joined-no-flow detail="true">0</disconnector-joined-no-flow>
        <disconnector-joined-flow detail="true">0</disconnector-joined-flow>
        <disconnector-joined-remove-mv detail="true">0</disconnector-joined-remove-mv>
        <disconnector-projected-no-flow detail="true">0</disconnector-projected-no-flow>
        <disconnector-projected-flow detail="true">1</disconnector-projected-flow>
        <disconnector-projected-remove-mv detail="true">0</disconnector-projected-remove-mv>
        <disconnector-remains detail="false">235</disconnector-remains>
        <connector-filtered-remove-mv detail="true">0</connector-filtered-remove-mv>
        <connector-filtered-leave-mv detail="true">0</connector-filtered-leave-mv>
        <connector-flow detail="true">0</connector-flow>
        <connector-flow-remove-mv detail="true">0</connector-flow-remove-mv>
        <connector-no-flow detail="true">0</connector-no-flow>
        <connector-delete-remove-mv detail="true">0</connector-delete-remove-mv>
        <connector-delete-leave-mv detail="true">0</connector-delete-leave-mv>
        <connector-delete-add-processed detail="true">0</connector-delete-add-processed>
        <flow-failure detail="true">2</flow-failure>
       </inbound-flow-counters>
       <export-counters>
        <export-add detail="true">0</export-add>
        <export-update detail="true">0</export-update>
        <export-rename detail="true">0</export-rename>
        <export-delete detail="true">0</export-delete>
        <export-delete-add detail="true">0</export-delete-add>
        <export-failure detail="true">0</export-failure>
       </export-counters>
      </step-details>
     </run-details>
    </run-history>
    If I want to retrieve information from field:
    <synchronization-errors> and <call-stack> how I can do this ?
    I'd like to have an output with few rows reporting something like:
    <synchronization-errors><import-error cs-guid="{F56B20AE-8EA3-E311-A7B3-005056A80FB6}" dn="CN=NAME,OU=Contacts,OU=Resources,DC=fqdn,DC=fqdn,DC=fqdn">
    <call-stack>Microsoft.MetadirectoryServices.ObjectAlreadyExistsException: An object with DN &quot;"CN=NAME,OU=Contacts,OU=Resources,DC=fqdn,DC=fqdn,DC=fqdn"&quot; already exists in management agent &quot;AD_CF&quot;. An object with targetAddress
    smtp:[email protected] already exists, Contact for ObjectName from CAN NOT BE CREATED
       at Mms_Metaverse.MVExtensionObject.Microsoft.MetadirectoryServices.IMVSynchronization.Provision(MVEntry mventry)
    </call-stack>
    Do you have any ideas on how to do that ?
    Thanks in advance!!!
    Regards

  • Not being billed at advertised price -- after two agents still wrong

    I ordered 15/5 FIOS online at a promotional rate.  After receiving my first bill, however, none of the promotional discounts are being applied.  I have talked to two agents, and both have said they had to open a "ticket" to fix my bill, but after over a month, nothing has been fixed.   I am being charged $45/mo higher than I should be, and have both the order confirmations, and the advertisements of the rate, that show what my bill should be.
    Can this please be escalated to someone who can fix my bill?
    Thank you.

    Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board. you will find a link to the private board where you and the agent may exchange information.
    To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

  • Error Adding ODI Agent to OPM-NModule libopmncustom: initialization failed

    Hi All
    I am getting an error when I try to add, remove or start and ODI Agent in OPMN. The Error is as follows:
    E:\Oracle\products\11.1.1\Oracle_ODI_1\oracledi\agent\bin>odi_opmn_addagent.bat
    agentcreate.properties
    Module libopmncustom: initialization failed (proc set odiagent)
    Module libopmncustom initialization failed: disabled
    opmnctl reload: reconfiguring opmn...
    opmn status shows that the agent has been added but it is down and when I try to start it I get the following error:
    E:\Opmn1\Oracle_WT1\instances\instance2\bin>opmnctl startproc ias-component=ERPI
    DEVAGENT
    opmnctl startproc: starting opmn managed processes...
    ================================================================================
    opmn id=servername:6701
    no processes or applications matched this request
    Response: not enabled: libopmncustom
    I can start and successfully test the agent using the agent_DEVAGENT.bat file but the problem seems to be adding it to OPMN.
    -This issues seems to be that the OPMN module libopmncustom failed to initialize properly and hence has been disabled. I cannot see how I can enable it and test again.
    I have tried the following to resolve the issue
    1. Removed the agent and restarted it
    2. Restarted the OPMN service
    3. Restarted the server
    4. Reinstalled ODI as well as the Stand Alone Agent
    5. Uninstalled OPMN and installed it to a different location
    Has anyone come across this and could you please give me a few pointers of what I can look at. The configs that I have are as follows
    ODI Version : 11.1.5.0_generic_110422.1001
    OPMN Version : 11.1.1.3
    OS : Server 2008 STD R2 x64
    ODI and OPMN are running on the same machine.
    Agentcreate.properties file:
    # Use / as path seperator to specify path in Unix as well as Windows.
    ORACLE_ODI_HOME=E:/Oracle/products/11.1.1/Oracle_ODI_1
    INSTANCE_HOME=E:/opmn1/Oracle_WT1/instances/instance2
    COMPONENT_TYPE=odiagent
    COMPONENT_NAME=DEV_AGENT
    ODI_MASTER_DRIVER=oracle.jdbc.OracleDriver
    ODI_MASTER_URL=jdbc:oracle:thin:@prddb:1521:hypprd
    ODI_MASTER_USER=ODI_MASTER
    ODI_MASTER_ENCODED_PASS=dzfHrWobFQN4u7YLBqBq7cqtljDTCy
    ODI_SECU_WORK_REPO=ODI_WORK
    ODI_SUPERVISOR_ENCODED_PASS=cByXt0OZvhRCIyaOQoTnl7y
    PORTNO=90210
    JAVA_HOME=E:/Oracle/Middleware/jdk160_21
    ORACLE_OPMN_HOME=E:/Opmn1/Oracle_WT1
    JMXPORTNO=91210
    ODI_OPMN_ADDAGENT
    @echo off
    REM #
    REM # Copyright (c) 2009, 2010, Oracle and/or its affiliates. All rights reserved.
    REM #
    setlocal
    for %%a in ("/HELP" "/help" "-HELP" "-help") do if %%a == "%1" goto HELPTEXT
    goto STARTCOMMAND
    :HELPTEXT
    echo.
    echo (c) Copyright Oracle. All rights reserved.
    echo.
    echo PRODUCT
    echo Oracle Data Integrator
    echo.
    echo FILENAME
    echo odi_opmn_addagent.bat
    echo.
    echo DESCRIPTION
    echo Adds agent entry in opmn.xml file.
    echo.
    echo SYNTAX
    echo odi_opmn_addagent ["<agent create property file name>"]
    echo.
    echo PREREQUISITES
    echo The Agent Create PropertyFile INFORMATION should be
    echo completed before running this script.
    echo.
    goto ENDCOMMAND
    :STARTCOMMAND
    if "%ODI_HOME%" == "" set ODI_HOME=E:\Oracle\products\11.1.1\Oracle_ODI_1\oracledi\agent
    REM call "%ODI_HOME%\bin\odiparams.bat"
    if "%OPMN_HOME%" == "" set OPMN_HOME=E:/Opmn1/Oracle_WT1
    if "%INSTANCE_HOME%" == "" set INSTANCE_HOME=E:/opmn1/Oracle_WT1/instances/instance2
    REM set CLASSPATH=%ODI_CLASSPATH%;%OPMN_HOME%\opmn\lib\opmneditor.jar
    set CLASSPATH=%ODI_HOME%\lib\odi-standalone-agent.jar;%OPMN_HOME%\opmn\lib\opmneditor.jar;%ODI_HOME%\..\..\setup\manual\oracledi-sdk\oracle.odi-sdk-jse_11.1.1.jar
    java -classpath %CLASSPATH% oracle.odi.AddAgentToOpmn %*
    CALL %INSTANCE_HOME%\bin\opmnctl reload
    :ENDCOMMAND
    ODI PARAMS
    REM #
    REM # Repository Connection Information
    REM #
    set ODI_MASTER_DRIVER=oracle.jdbc.OracleDriver
    set ODI_MASTER_URL=jdbc:oracle:thin:@prddb:1521:hypprd
    set ODI_MASTER_USER=ODI_MASTER
    set ODI_MASTER_ENCODED_PASS=dzfHrWobFQN4u7YLBqBq7cqtljDTCy
    REM #
    REM # User credentials for agent startup program
    REM #
    set ODI_SUPERVISOR=SUPERVISOR
    set ODI_SUPERVISOR_ENCODED_PASS=cByXt0OZvhRCIyaOQoTnl7y
    REM #
    REM # User credentials for ODI tools
    REM #
    set ODI_USER=%ODI_SUPERVISOR%
    set ODI_ENCODED_PASS=%ODI_SUPERVISOR_ENCODED_PASS%
    REM #
    REM # Work Repository Name
    REM #
    set ODI_SECU_WORK_REP=ODI_WORK
    REM #
    REM # Connection retry parameters
    REM #
    set ODI_CONNECTION_RETRY_COUNT=0
    set ODI_CONNECTION_RETRY_DELAY=7000
    REM #
    REM # Java virtual machine
    REM #
    set ODI_JAVA_HOME=E:\Javax86\jdk1.6.0_29
    REM #
    REM # Other Parameters
    REM #
    set ODI_INIT_HEAP=256m
    set ODI_MAX_HEAP=1024m
    set ODI_JMX_PROTOCOL=rmi
    REM #
    REM # Additional Java Options
    REM #
    set ODI_ADDITIONAL_JAVA_OPTIONS=
    REM # Windows 95,98, Me users only: Any package files added to the /drivers
    REM # or /lib/scripting directory should be manually declared in the
    REM # ODI_ADDITIONAL_CLASSPATH variable
    set ODI_ADDITIONAL_CLASSPATH=
    REM # DO NOT EDIT BELOW THIS LINE !
    REM # ----------------------------------------------------------------------------
    set ODI_JAVA_EXE=%ODI_JAVA_HOME%\bin\java.exe
    set ODI_JAVAW_EXE=%ODI_JAVA_HOME%\bin\javaw.exe
    set ODI_JAVAC_EXE=%ODI_JAVA_HOME%\bin\javac.exe
    REM # Testing the java virtual machine
    if not exist "%ODI_JAVA_EXE%" goto NOJAVA
    if not exist "%ODI_JAVAW_EXE%" goto NOJAVA
    if not exist "%ODI_JAVAC_EXE%" goto NOJAVAC
    goto OKJAVA
    :NOJAVA
    @echo The Java Virtual Machine was not found at the following location: %ODI_JAVA_HOME%
    @echo The ODI_JAVA_HOME environment variable is not defined correctly.
    @echo Please set this variable in odiparams.bat.
    goto OKJAVA
    :NOJAVAC
    @echo A JDK is required to execute Web Services with OracleDI. You are currently using a JRE.
    goto OKJAVA
    :OKJAVA
    if "%ODI_HOME%" == "" set ODI_HOME=E:\Oracle\products\11.1.1\Oracle_ODI_1
    REM # Change the current directory to %ODI_HOME%/bin
    cd "%ODI_HOME%\bin"
    Environmental Variables
    JAVA_HOME=E:\Javax86\jdk1.6.0_29
    ODI_JAVA_HOME=E:\Javax86\jdk1.6.0_29
    Path=C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32
    \WindowsPowerShell\v1.0\;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Meran
    t\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bi
    n;E:\Javax86\jdk1.6.0_29;E:\Javax64\jdk1.6.0_29;E:\Opmn1\Oracle_WT1\bin;E:\Opmn1
    \Oracle_WT1\opmn\bin;E:\Opmn1\Oracle_WT1\opmn\lib;E:\Opmn1\Oracle_WT1\perl\bin
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
    Could someone please help me with this.
    Thanks
    Edited by: 800166 on 18/05/2012 00:39

    Solved the problem by dropping and recreating the user schema and all its objects, reinstalling and configuring both ODI and OPMN.
    If you ever come across the problem I recommend the above, you will save yourself hours of troubleshooting

  • Telemetry Agent silent operation

    Hi,
    We are planning to use the Telemetry agent on workstations running either Windows XP and Windows 7 and running versions of Office ranging from office 2003 to Office 2010.
    Will the agent pop-up information to the screen when incompatibility are found?  Or will this discovery process be running silently? We want the users not to see anything on their screen when incompatibility is found.
    Thanks for your help
    Jean D.

    Check the following steps on How telemetry data is collected
    Users log on and trigger the Telemetry Agent scheduled task
    Telemetry Agents send data to the shared folder
    Telemetry data is processed to the database
    IT Pros access telemetry data by using Telemetry Dashboard
    Office Telemetry is new for Office 2013, so it’s not built into Office 2003, Office 2007, and Office 2010. For those clients, you deploy an agent that collects information about the installed add-ins and the most recently used documents. You won’t get application
    event data for these clients like you do with Office 2013 clients, but you'll get inventory and usage data that helps you discover what is being used and likely important to your business.
    For detailed information refer to the link below:
    http://technet.microsoft.com/en-us/library/jj863580.aspx#bkmk_howistelemetrydatacollected
    Tylor Wang
    TechNet Community Support

  • Verizon reporting negative information on credit report

    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.
    Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.
    To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
    Please keep all correspondence regarding your issue in the private support portal.

    I used to have a Verizon landline and had an excellent pay history with them as I currently do with Verizon Wireless.  In 2010 I decided to cancel our landline service in favor of an additional cell phone with that same number.  When I did this I received a "Final Bill" from Verizon and paid it as I always did, I also had a Verizon and Direct TV Bundle which meant I pay one bill for both services.  After about a year I received a call from Verizon's collection agency in 04/2011 for money I still owed, I told them I paid the final bill.  Apparently when you have a bundle with Direct TV some of it is billed ahead and this amount was due.  I never received another bill from Verizon for this amount so I never knew.  Once I spoke to collection agency I paid the remainder in 5/2011.  For that last 4 years Verizon has placed a negative mark on my credit report that shows as "Serious delinquency" when creditors check your credit report. I feel this is extremely unfair and has affected my credit on at least 2-3 occurrences.  I do not understand why Verizon can't see this was an honest mistake and remove the negative report.  In fact since I paid it off in 05/2011 (right after I found out about it) why did they even report it in the first place in 06/2011? Please help me!  I hear it takes 7-7.5 years to remove this from credit.  This is so unfair and I have seen that I am not alone from posts on this forum.  What can I do to get this removed so it no longer affects my credit rating? Thank you for any assistance.

  • RGS routes calls to Busy agents (alredy In a Call)...

    Hi guys,
    our Call Centre agents are reporting they get 2nd incoming call transferred via the same workflow as the 1st call.
    Their status is In a Call and obviously call should not be routed to them.
    Screenshot
    http://img855.imageshack.us/img855/8094/rgsbug.jpg
    Apparently this happens when there are a whole bunch of incoming calls.
    Do you know what is the coded logic for RGS quering agents status?
    Does it query RTC db for agents status?
    My guess is there's some OCS server component underperforming and RGS application queries something (db?) to find this particular agent status is Available (not updated yet to In A Call).
    OCS 2007 R2 Front-End is running on 3.5.6907.221 updates (RTCC/3.5.0.0 Response_Group_Service)
    Mediation Server
    RTCC/3.5.0.0 MediationServer/3.5.6907.196
    thanks for any hint

    plug n pray,
    "Match Making" component of RGS queries database for Agent's presence State.
    It is possible that it may not be getting the updated State because of performance issues.
    You can use  RGS performace Counters to monitor the activity.
    "LC:RGS - 01 -Response Group Service Match Making"\"Total Number of presence notifications received"
    "LC:RGS - 01 -Response Group Service Match Making"\"Total Number of presence subscriptions terminated"
    Also please review the capacity of your server
    http://technet.microsoft.com/en-us/library/dd425159(office.13).aspx 
    Table 6. Response Group Service User Model
    Component
    Per Enterprise deployment
    Per Standard Edition server
    Active agents (formal and informal)
    1,200
    1,200
    Number of standard Response Groups
    450
    150
    Number of queues used
    One unique queue for each hunt group, two for the One-Level Interactive response group
    One unique queue for each hunt group, two for the One-Level Interactive response group
    Distribution of routing methods on groups
    Parallel routing: 40%
    Longest idle: 40%
    Serial: 10%
    Round robin: 10%
    Parallel routing: 40%
    Longest idle: 40%
    Serial: 10%
    Round robin: 10%
    Percentage of workflows that use speech recognition in their interactive voice response (IVR) versus workflows that use only dual tone multi-frequency (DTMF) in their IVR
    Speech recognition/Text-to-speech (SR/TTS) + DTMF: 50% DTMF: 50%
    SR/TTS + DTMF:50% DTMF: 50%
    Number of hunt groups (mix of 50% simple and 50% complex hunt groups)
    600
    300
    Average number of agents per group
    10 agents
    10 agents
    Average number of groups an agent is a member of
    Two groups
    Two groups
    Number of groups per queue (average)
    90%: One group 10%: Two groups
    90%: One group 10%: Two groups
    Number of simultaneous response group calls
    480
    60
    Average call duration (IVR portion + music on hold)
    30 seconds
    30 seconds
    Average call duration with the agent
    3 minutes
    3 minutes
    Number of sign-in/sign-out cycles for formal agents in a day (based on an 8-hour day)
    4
    4
    Table 7. Maximum Supported Users for Each Topology
    Topology
    Servers required
    Maximum users supported
    Standard Edition server
    One Standard Edition server
    5,000
    Enterprise pool, consolidated configuration
    Eight Enterprise Edition Front-End Servers running all server roles
    One Back-end SQL Server
    100,000
    Note:
    If deploying only IM and presence, Office Communications Server 2007 R2 supports 200,000 client end points, where each end point is a client program, such as Communicator, based on eight Front End Servers and a 16-core computer running the Microsoft
    SQL Server database software. The back-end database must run on a 4-way processor, quad core, or 8-way, dual core, 2.0 GHz+ computer.
    -Santosh

Maybe you are looking for

  • Logic 7.1.1 Vs Reaktor Session 1.3.1

    SO....... boy is this turning into a 'mare and half. I picked up a new copy (yup i know its now discontinued) of Reaktor session last week. Although it states on the box that its able to open as an AU, and its also listed on the Audio Units Compatabl

  • How to get the colors value of each pixel (ps cs3 ,JS) ?

    hi all, i use something below, and they dont work. var colorvalue=docRef.colorSamplers[0].color.red fileOut.write("value=") fileOut.write(colorvalue) thanks!

  • 11g: Custom error handling for all application raised exceptions?

    Hi, the only thing I can find in the documentation regarding an error handler is this: http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/web_adv.htm#BABEHFHI (26.8) However, this kind of error handler seems to ignore exceptions thrown in b

  • Getting Kicked Out of Safari

    I've been kicked to the home screen on the iPhone over a dozen times while browsing websites. It has happened with Google sites and other sites that it shouldn't happen with. Any solutions? Is it a certain type of media causing this problem? Random?

  • Compile forms error because using rank function

    Hi, Oracle Form 9i don't known rank function in my SQL statement. When compile forms, it alerts err message: "Encountered the symbol "(" when expecting one ..." code: select * from ( select group_id, acct_no, acct_desc, rank() over(order by acct_no d