False attack alert in 2 sites. Please unblock this sites ?

http://www.rodrigovianna.com.br and http://www.viomundo.com.br

Firefox has no control over these sites.. These are Blocked by Google as (Unsafe Web Material And Malicious Software Hosted On The Domains). Here Are The Links To The Data Pages On Those Sites:
rodrigovianna: [http://safebrowsing.clients.google.com/safebrowsing/diagnostic?client=Firefox&hl=en-US&site=http://www.rodrigovianna.com.br/ READ BLOCK INFO]
viomundo: [http://safebrowsing.clients.google.com/safebrowsing/diagnostic?client=Firefox&hl=en-US&site=http://www.viomundo.com.br/ READ BLOCK INFO]
Sorry For The Inconvenience!
- Scott

Similar Messages

Please unblock port 25

Dear Sir/Ms.,
I had been using port 25 with my IP Cameras for sending alerts before I switched from Time Warner to ATT. Now, it seems this port is blocked, and could you please unblock it so that my IP cameras continue to work?
My account number is: [edited for privacy – please do not post personal information]
and my phone number is: [edited for privacy – please do not post personal information]
Thank you very much!
Xiyou W

xiyouwang1 wrote:
Dear Sir/Ms.,
I had been using port 25 with my IP Cameras for sending alerts before I switched from Time Warner to ATT. Now, it seems this port is blocked, and could you please unblock it so that my IP cameras continue to work?
Thank you very much!
Xiyou Wang
Click the ATT Uverse Care link in my signature, send the PM, explain your port 25 situation.
Include your account #, email address and a good phone # (land or cell) and time to contact you on.
Check the blue PM envelope, upper right on every page, for their reply. Good luck
Chris
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more

I recieved message by my phone that i got prize from this web apple .claims@aol.co.uk please is this message true and belong to apple site or this message not true please answer me

i recieved message by my mobile phone from this site [email protected] please is this adress tbelong to apple .come or this adress and the message that i recieved not true please answer me

It's fake.
(79781)

I am trying to apply for a job on line and I am receiving this message t has been determined that you are currently running a "Popup Blocker". In order to continue, please allow this site from within your "Popup Blocker" preferences. How do I fix this?

Hello,
I am trying to apply for a job on line and I am receiving the following message "
t has been determined that you are currently running a "Popup Blocker". In order to continue, please allow this site from within your "Popup Blocker" preferences
How do I correct this??
Thanks!

Open Safari preferences, click on the Security icon in the toolbar, uncheck the pop-up blocker option.

Please unblock my account

hi please unblock my Skype ID as I make international calls frequently. and it is very frustrating that I can log into my Skype account with the correct ID and the correct password(which was reset through my email), but can't make a call. What is the point of that? I can log in and see all my personal informations but can't make calls? I can't believe Skype does not offer phone customer support even today. When we have serious problems like this, we don't trust online chat and email request. We would like to talk to a real person and make sure the problem is resolved within minutes. I tried switching to Google Voice yesterday but the quality was subpar. Now I am switching back to Skype so please unblock my account.

Hi, Whatever234, and welcome to the Community,
We here in the Community can not unblock an account as our Community Guidelines explain we are not a branch of Skype Customer Service. Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
Your report reads as if Skype's fraud filters interpreted a series of international calls as potentially fraudulent; whatever triggered this suspension may have been outside your typical call patterns.
Here are a few extra notes to guide you along the way ...
You will need to proceed through each step, one at a time. Sign on to the Skype website as requested. Choose the subject and topic which most closely matches the item you need assistance with. Then, continue past Step 2 of the instruction where several articles from the FAQ library will appear for you to review, and proceed to Step 3, Continue Support Request (the blue "button" appears at the lower right corner of the website page). You may also skip through Step 4 where you will be referred back here to the Community; no need to do this as the Community is where you started. When you complete the web-form and click Submit, your information is relayed to Skype and you will receive a reply via e-mail unless you are transferred to start an instant message chat session with a Customer Service agent.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!! SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.

The issue: Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!!
SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
The cause: It is now clear what caused this problem. For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.). In May 2012 I decided to make some of them one hour events so I could add alerts to remind me of the event. I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
The symptom: Syncing stopped working for the calendar but continued working for contacts and notes. I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious.
The failed attempts: I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance. From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012. Events before May were in both Outlook and the iPhone but events after May were only one or the other. Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious. MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things. We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
The fix: After 18 months of frustration, MANY hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync problem and it indicated all day events were related. I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events, sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync. It synced for the first time in 18 months!
Problem occurred May 2012 – fixed Nov 2013

Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
It will recursively remove all '_ModGrp...' folders
Sub RemoveFolders_Click()
    Dim oOutlook As Outlook.Application
    Set oOutlook = New Outlook.Application
    Set objNameSpace = oOutlook.GetNamespace("MAPI")
    Call CleanFolders(objNameSpace.Folders)
End Sub
Sub CleanFolders(objFolders As Outlook.Folders)
    For i = objFolders.Count To 1 Step -1
        If Left(objFolders(i).Name, 7) = "_ModGrp" Then
            objFolders.Remove( i )
        Else
            If Not objFolders(i).Folders Is Nothing Then
                Call CleanFolders(objFolders(i).Folders)
            End If
        End If
    Next i
End Sub

My scroll feature of the Lenovo ThinkPad(red scroll) is not working in the new Firefox 4. It was working fine in 3.6. Can you please fix this as this is very important feature.

The scroll feature(middle button) is not working on the new firefox 4. So because of this I need to move the scroll bar to move the page. This is very irritating problem, if you are a guy who uses the middle button to scroll. Can you please fix this..
Thanks!!!

I updated to Firefox 4.01 today and the middle scroll button on my Lenovo T400 stopped working. I downloaded the updated Ultranav utility and the Ultranav driver for my T400 from here http://www-307.ibm.com/pc/support/site.wss/MIGR-72858.html and then uninstalled the "Thinkpad Ultranav Driver" from Add/Remove programs rebooted and then installed the updated utility and driver (another reboot) and it now works perfectly.
So glad to get this working again.

Frequently Asked Questions (FAQ) BEFORE you post, PLEASE read this first

PLEASE READ ALL OF THIS POST BEFORE POSTING ON THE FORUM FOR THE FIRST TIME!
Welcome to the Creative Labs MP3 Players web forum!
This forum is for discussing issues related to the MP3 players (digital audio players) made by Creative Labs for those in the Americas, Europe and Asia Pacific . Although we're not going to turn away folks from other areas
The primary language of the forum is English, and posting in English is likely to get you a quicker response.
If your question does not relate to Creative MP3 players please find another more suitable forum to post in. If you want to discuss another player, or something not covered by another forum, please use the Off Topic forum.
CONTENTS
How to contact support
Hot topics
General issues
Before you ask your question
When you ask your question
After you ask your question
Low volume issue
Nomad Primer
Nomadness.net FAQs
More useful links
Wishlist and petitions
Suggesting changes
. How to Contact Support
Please note this is a peer forum and Creative's Support staff do not guarantee a reply here. If your issue is urgent, you are within your warranty period and/or you do not get a fast reply here you should contact Creative Labs Technical Support.
To contact support click the Support > Contact Customer Support link on this page.
When contacting Creative Support by email it's important to note that you must reply to the autoresponse email you first receive, as detailed in the email itself. Also make sure to check any spam trap you have on your email system if you have not received a reply.
It's also important if you feel that you have a bug or defect with your product to register that issue directly with support. Don't rely on the forum to raise awareness of an issue.
2. Hot Topics
This is dividied into 3 sections: General, Tag based players & USB mass storage players.
Make sure to also look at Section 3, which covers some of the other General Issues.
General
Where do I get the latest software, drivers and firmware?
Click the link Support > Downloads on this page.
In general, when installing on a new PC you need to download the driver, and some software to communicate with the player e.g. MediaSource, Media Explorer. For players using the v2.xx MTP/PlayForsure firmware drivers are not necessary, but you must have Windows XP and Windows Media Player 0 (this provides the MTP driver).
Important: Even though files are described as updates, none of the software requires a previous version to install. At worst they will prompt you to connect your player to verify you own a Creative product.
Note if you are downloading MediaSource make sure to download and install the relevant MediaSource plugin for your player. If MediaSource can't detect your player this is the first thing to check. For the v.xx PDE firmware the plugin is called the Creative Zen and NOMAD Jukebox plugin for Creative MediaSource , and for the v2 MTP/PlayForSure firmware it's called Creative MediaSource Plugin for PlaysForSure devices .
I am completely new to MP3 players, where should I start?
Have a read of my Nomad Primer, so called as Creative's MP3 player range tend to be prefixed with the word Nomad.
I think I have a bug, how can I check?
There's a known bug list hosted at my site here. If you want to add a bug then please
I have a wish request for the player, what can I do?
You can post it here (see the petitions listed in Section of this FAQ), email it to support, and/or add it to the public wishlist I host here by
I'm having connection problems with my player
If you can, the best test is to try your player with another PC, to see if you still have the problem. This localises whether the problem is with the PC (most likely the USB) or the player. See the link below (search on "connection problems") for a lot more troubleshooting on this.
What bit-rate should I encode my music at?
Ultimately it's down to your ears what bit-rate you prefer, and you should listen for yourself to determine it. If you ask on the forum you'll get many different opinions.
Make sure to look at the "MP3 vs. WMA" link below also.
How long should my battery last?
For the Zen and Nomad Jukebox players, to get some idea of how long your battery will last for a given bit-rate look at the battery curves thread. Ultimately battery life is dependent on how you use the player, make sure to follow the "why doesn't my battery last as long as expected?" link below.
How long does an RMA take?
Typically 2 weeks. But it might take a little longer, so don't start posting if it's 5 days.
I want to know how people feel about their Zen Micro/Touch/MuVo etc.
There's a long post titled Experience with your Creative player that has many posts from users about their players. Please search back for threads about specific players before starting a new thread.
Where can I buy online music or get legal downloads for my player?
See this thread.
My tracks don't play at the correct speed e.g. they play too slowly, why?
Chances are they are encoded in an unsupported sampling frequency. The tracks will need to be re-encoded at a supported bit-rate and/or frequency with something like Creative's MediaSource Audio Converter or dbPowerAmp.
Can a Creative player work on an Apple Mac?
It isn't officially supported, but some kind folks out there have written freeware applications to get your Creative player working with Macs. XNJB provides support for the Zen players, and requires OS X 0.3 or 0.4 (check the site for full details). MuVoHelper solves some problems with getting the MuVo to work optimally. The iTunes Zen plugin should support all Zen players. Note if the link to the plugin is broken just Google "iTunes Zen plugin" to find other sources. Also note there's no guarantee that these programs will work with the Mac, so if you have issues you should address your problems to the developer(s) of the relevant program.
Can a Creative player work on Linux?
Again it isn't officially supported, but again some kinds folks out there have written freeware applications to get your Creative player working. There's the Gnomad2 project. And don't forget the Linux forum at Nomadness.net if you are still having problems.
Tag Based Players
This section covers the players that use a hard disk and work using tags e.g. Zen Xtra, Touch, Micro, Sleek.
My Zen is not behaving properly, won't startup, or goes into rescue mode. What should I do?
If the Zen is not starting properly or not behaving correctly, first try to reset it. To reset all players except for the Zen Micro there is a small switch on the side of the player typically, that you should press using something like a bent paper clip. Don't use anything sharp. To reset the Zen Micro simply remove the battery and replace it.
If this doesn't work then access rescue mode, and try running a disk cleanup.
Next you should try reloading the firmware/OS, but beware if you are having connection problems also with your PC you may end up with a player that has no firmware and cannot be reloaded.
The last resort is to format the player. This will erase the contents from the player, including the content that ships with the player.
If none of these resolve the problem and you are under warranty you should get in contact with support to arrange replacement of the player.
If you aren't under warranty Creative will still repair the player, which you can arrange by contacting support.
How do I do a Disk Cleanup and/or access Rescue/Recovery Mode?
Refer to the sticky Rescue Mode thread. Disk Cleanup is accessed from this. Note that the MuVo players (with the exclusion of the MuVo? players) do not have Rescue Mode.
How long should a Disk Cleanup take?
It should only take a few minutes, and no longer than 30 minutes. Anything longer than this and there is a problem with the player and you need to contact Creative Support.
How long should a format take?
Only a few seconds. Anything more than a minute and there is a problem with the player and you need to contact Creative Support.
Although I can get into Rescue Mode, I can't select any option, or the options don't work?
If Rescue Mode is not working properly or commands can't be chosen the player is faulty. You need to contact Creative Support.
When are the Zen 20Gb/Neeon going to be released outside of the Asia Pacific region?
Due to popular request the Neeon is launched in the USA, but nowhere else for now. If you want the Neeon then contact your regions Customer Services to request it.
The Zen 20Gb is available from some shops in the USA and Europe e.g. Cambridge Soundworks, and Amazon.co.uk.
Is there a known issue with the Zen Micro headphone socket?
Creative Support have neither confirmed nor denied it officially. Some users have posted purported emails from Creative on the forum saying that the socket has been reinforced, but these have not been confirmed by Creative Support either. The exact incidence of the problem is unknown, but newer players seem to suffer less from it.
Should I buy the Zen Micro or Touch etc. and what colour should it be?
We can't tell you what player to get, or what colour it should be. Look at your collection size and the features of the player (see Nomadworld.com for the product pages) and decide yourself based on this.
Why does my Zen Micro battery drain so quickly?
The standby time (24 hours from turn-off) for the Zen Micro seems to use a lot more power than previous Zens. Creative have released both v (..0+) and v2 (2.20.05+) firmware that reduces the standby time to 4 hours. Make sure to update to one of these if you have a draining problem.
Also see JazzMC's detailed page on this problem.
Why is my Zen Micro/Touch Touchpad so sensiti've and/or difficult to use?
The Touchpads take some time to get used to.
continued below... Message Edited by SSR on 2-29-2005 04:03 PM

7. Low Volume issue
See here in the Zen FAQ at Nomadness.net.
If the firmware will not apply because it says the version number is the same use the Reload OS option, access to which is described in the relevant FAQ for your player below.
8. Nomad Primer
If you have ordered, or just bought a Nomad Jukebox, Zen, or MuVo?, consider reading the Nomad Primer.
It may be worth reading even for the more experienced User.
9. Nomadness.net FAQ's
General FAQ
Jukebox FAQ
Jukebox 2 FAQ
Jukebox 3 FAQ
Jukebox Zen FAQ
MuVo FAQ
Nomadness.net is the foremost peer site on the Web for the Nomad players on the Internet; with news, articles, web forum, download archi've, and more!
0. Some more useful links
Nomadworld.com - Creative Labs's International Nomad website (based in the USA)
Player Manuals - Downloads of digital manuals
Notmad Explorer - 3rd party software
Battery Uni'versity - very good, comprehensi've site on batteries
Chinese Support thread - with information on how to get chinese characters on your player
. Wishlists and petitions
Here are links to a number of general wishlist and petitions, so rather than starting your own you can add to those that already exist, or of course add your support for a feature you would like to see.
Also remember that the only collecti've public wishlist is maintained here at StainlessSteelRat.net (this is not affiliated with Creative Labs, but maintained by the author of this FAQ). There is also a bugs list here. So please
Wishlists
Zen Micro
Zen Micro (another)
MuVo Sports C00
MuVo N200
Petitions
AAC support
Lossless codec support
MP3 Pro support
Ogg Vorbis support
Audible support
Genre definable EQ
Gapless playback
Games support
Insert to queue
No "the" in Music Library
Open source firmware
Play count and ratings
TXT viewer
USB mass storage / dri've letter support
Track number duplicate checkAlbum art
Substring search
Dual firmware for both tag and dri've letter support
Rename "Reload OS" to "Erase OS"
Zen Micro alarm enhancements
Zen Micro always visible clockZen Micro Audible support
Zen Micro customisable standby time
Zen Micro EAX
Zen Micro radio enhancements
Zen Touch non-PlayForSure firmware with bug fixes
Zen Touch bookmarks
Zen Touch EAX support
Zen Touch random button changeZen Touch Audible support
2. Suggesting changes
To suggest changes to this FAQ please
Thanks for reading!

Receiving Photo Messages; Please read this Apple.

Okay, I understand that I'm not going to get mms right now, but please change this!!!
There is no reason that the www.viewmessage.com url doesn't include the message id and password which would make my life and everyone else's way easier. Please just make the "Viewmymessage" template to something like www.viewmymessage.com/?MSGID=q21xddmfs&Pass=asdwsdf3 -- Even if it just fills the form fields on the viewmymessage.com site. ANYTHING would be better then trying to remember the most cryptic message id and password ever!

BarryPeterson wrote:
little more clout then I do.
First, it's a little more clout THAN I do.
Second, Apple chose to not have MMS. They really don't have any interest in contacting AT&T. If this is important to you, you can give AT&T feedback on their forums. If not, that's your choice, but then don't come here and complain.

You appear to be using a browser plug-in that attaches spam to your Facebook posts. To complete your post, please remove this browser plug-in or switch to a different computer

a few days ago,I updated my plug ins and anti virus free ware.After that I wanted to post a link on my facebook site,but was prevented from doing so.The message
" You appear to be using a browser plug-in that attaches spam to your
Facebook posts. To complete your post, please remove this browser
plug-in or switch to a different computer"
appears every time.
I checked all my plug ins but can't find the problem.What can I do ?

To fix: AVG > Tools > Advanced Settings > LinkScanner > Untick the 3rd Option > APPLY> OK

Please try this with your Internet Explorer.

Hi,
I have the feeling, that the internet Explorer cant show applets, if they are saved in a local folder. Can you please try this with your IE? Compile this Applet:
import java.applet.*;
import java.awt.*;
public class HelloWorld extends Applet
public void init()
public void stop()
public void paint(Graphics g)
g.drawString("Hey hey hey",20,20);
g.drawString("Hellooow World",20,40);
And then create a html in the same folder:
<HTML>
<APPLET CODE=HelloWorld.class WIDTH="400" HEIGHT="250">
</APPLET>
</BODY>
</HTML>
You'll see that it'll work fine with Netscape and the Appletviewer, but NOT with IE . Can someone confirm this? Does anybody know why?
I got this applet from http://www.realapplets.com/tutorial/HelloWorld.html . And if I visit this site online, my IE shows the applet correctly. It just wont show any locally saved appelts. Please help!
thanx

Why doesnt nobody read my question? I have the plug
in and I said, that IE shows all applets which are
online!!!! Didnt I say that? And if it shows them,
then I must have a plug in, right? I guess nobody
knows the answer to my question.Hi There!
This might be the same problem I had run across, though I don't fully understand it, if anyone else can explain it further afterwards.
My problem was very similar in that I could compile and view the applets on my primary pc fine, but if I tried pulling it up from the almost-local shared folder of the other PC on my Lan, or even fully copied into the other drive, I could not view it(Neither could I view it loaded from the web with the other, though my primary worked fine). I used IE exclusively, so I don't know if this would effect netscape at all.
The fix I found after searching through about 17 pages of posts for a clue in these forums was this:
javac -target 1.1 filenameAfter I recompiled with the -target 1.1 the applet's ran perfectly on the other pc.
Hope this helps,
-Tom

Please sorry this very newbie question.

Hello people
Again, please sorry this question I'm very new in this Emerging Technologie.
I Wish to know the difference between Fiber Channel and Fiber.
I assume please do not laught, That a Bundle of Fiber ports conform a Fiber Channel am I Right ?
Can anyone point me a good web site where I can find this difference
Thanks for you Help
Victor.

Fibre Channel is a technology/protocol for networking Storage. See http://www.t11.org/index.html for all the standards. Fibre is either Multi Mode(orange) Or Single(yellow) and is the actual fiber Optic cable used in Storage area Networks to connect switches, storage and Host systems together.

Please make this a good experiance for my first post on any board. READ ME

Hi all. Well first off, let me start by saying that my whole life I've owned PC's. And I'm not hacker Elliet. But I've gotten to know them pretty well. All the way from Windows 3.1 that came out a long time ago (more than 10 years ago)
So after a while of hearing about MAC's I decided to start small and get an iPod (since they are so popular here in NYC) and see what apple was about. Well I really saw that Apple had a great product and started asking about their computers. And did plenty of research. And before the new Intel Macs came out, I was going to get a powerbook. But I had a feeling a new laptop was coming out and waited a lil while and sure enough. The Macbook Pro came out. So I went out and did all my research (as to this being the first real purchase of a Apple product and knew about the possible implications of a new first gen Intel chip in a apple product litterally making history) I knew I might become a new beta tester.
So I started looking on these boards and did 2 weeks worth of hard research to see if the Mac Book Pro (MBP) was for me. And after all the problems i saw (ex: The whine, Right speaker distortion, heat coming from it, white line at bottom of screen, etc) I never saw or read anything about AOL connectivity problems. And I know, I know... alot of you are probably going to gripe and complain about AOL sucking and yada yada yada, but please. Cut me some slack. I actually like AOL. I got on it back in 92 when it came out, and really enjoyed it. And have been on it since. I like chatting on there, and so forth. And I hope you help with my problem instead of telling me to go get "a real ISP" I do have a real ISP, but I like my AOL too.
So now to my problem....
I have a Sony Viao 1.8ghz PC with 512 ram, 80 gig hard drive, 10/100 ethernet port. Connected to a Belkin Router (more info below on specs of router) connected to Opt Online Broadband Cable internet with VoIP. I use my macbook pro on the wireless network at my home.
I got a mac book pro 1.83 ghz running 512 ram on Tiger OSX 10.4.6 I thought that I would wait till a connectivity patch (which I thought would have been 10.4.6) fix the airport problems came out till I posted something. But now that I've tried everything, I'm hoping you open this thread and help me and possibly someone else out there as well. I just d/l'd and installed the 10.4.6 update last night and it did'nt help. So here's more info on my specs. I have a belkin router wireless G 2.4 ghz 54mbs router and I have configured the router with it's firewall, wap2 encryption (as it's the only selection the router has that is available that matches what airport comes with in encryption) I hid my network, and have tried to upgrade the firmware on the router.
Now Here's the real problem. I can connect to AOL on my MBP when I connect the actual ethernet cable to the MBP's Ethernet port (after I have let the cable modem do a hard reset to configure itself to a mac) I can connect to AOL. But when I disconnect the cable and return it to it's normal config, I can't connect to AOL. I can connect to the internet via safari, and firefox, and even AOL's IM on iChat. I can use Itunes all kinds of things. I can even play warcraft 3 wirelessly on battlenet. But connecting to AOL is a pain in the @$$. It's the only proggy I have that won't allow it to connect. I keep getting the error message "Your AOL connection ended because the AOL host was unable to start a new session. Please try to sign on again." Of course All i see for a while is the spinning black and white circle. And it goes through step 1 and 2, goes straight to 6. Then it goes blank, and BAM! That message pops up. And what's so frustrating is that I've tried every possible configuration on AOL, my router and even system preferences, for it to let connect. I even went into system preferences on the mac and went down the the Internet & Network "Sharing" icon and tried 100 possible combinations on that in the services tab, and firewall tab. I've turned them on, off, tried to make exceptions ETC. And no matter how much I play with the personal file sharing and windows sharing advanced settings and sigh every possible combination to make AOL connect via wirelessly. And nothing. I then even tried to fix the connection under AOL in setup. I've gone through and selected TCP Script, Airport Script. Cable Script, And practically every script I can think of. And nothing. I even went on to AOL and downloaded thier alleged fix to wireless accessing AOL. And nothing. I've been searching all over google, AOL's website, and all over these discussion boards and no mention of anyone even having the same problem. But please, someone out there with their infinit knowledge of how Macs run and having more experience than me, Please make this a good experiance for my first post on any board anywhere reguarding a mac. A MBP at that too.
An update to this, But amazingly enough, I actually got it to connect to AOL wirelessly for the first time yest. But I have no Idea how i did it. I tried for 3 hours to reproduce it and no luck. I was accessing my router at it's website config screen and somehow I clicked on connect to AOL and while it was trying to connect to it, i reset the router and BAM, it connected to AOL. And I was in shock. I thought I solved it. Somewhere while it was reseting the router it connected and stayed connected to AOL till I signed off and tried to sign back on to see if I could now connect, and guess what. The same dumb message keeps popping up "Your AOL connection ended because the AOL host was unable to start a new session. Please try to sign on again." And all I did was sign off to test it, thinking I had fixed the problem. I tried for 3 hours like I stated above, and BAM got it connected to AOL wirelessly again (somehow while the router was resetting). And thinking I fixed it, or figured out the trick to getting it to work, signed off... I kissed aol goodbye again. And have been unable to reproduce the "glitch". SIGH Can someone out there please help me?
I think I've made this message as detailed as possible, but please, can someone give me some constructive criticism on how to fix my AOL wireless connectivity problems. Do you know if it's my router? My MBP? AOL software? BTW, I got AOL software version 10.3.7 (Rev 4136.310 US) The latest version I D/L'ed from the AOL website. Anyone know If I should turn on or off some things such as personal fire sharing on, or firewall off or on? ANYTHING. Please. I've put alot of time into writing this post and making it as detailed as possible. And been having this problem for the past 3 weeks that I've had my MBP, and have waited long enough to use my AOL. If you need any further information or suggestions on making AOL work, please let me know. Thank you for taking the time to read all of this, and I really appreciate all of you in the time you take in responding back in trying to help me. I'll be monitoring this post almost hourly. So I hope someone out there can help. Thanks so much again. And help me make this transition to Mac a pleasant one knowing that there is a mac community out there willing to help a new mac client. Again, Many thanks
In Heath and Wealth,
Bruce
Mac Book Pro 1.83 GHZ 512 Ram Mac OS X (10.4.5)

I FIXED IT!
FYI for the rest of you that might be having the same problem. DON'T USE A BELKIN ROUTER WITH AOL ON A MBP!!!!! It ***** wirelessly. or even hard connected, it won't connect. I went to best buy today, and got a refund on the belkin. I then went to J&R and got a D-Link router. And now it works perfect. I can now chat on AOL yet again, and I tried all the other web browsers I have and messengers, and warcraft 3 online via battlenet. And it works great. I want to give you guys a special thanks for taking time out to answer back to my post. FYI! Belkin wireless G routers do not connect you to AOL wirelessly on MBP's. No matter how much you mess around on them. I highly recommend a D-Link Router. They are easy to set up as long as you READ ( AND I MEAN IT!!!) read the instructions before you set anything up on it. Use the CD that it comes with, and you'll be good to go. Set it up and it works great Almost no dead zones in the house, and now I can use the MBP with all it's cababilities. Thanks people. I really appreciate it.
P.S. I called belkin last night when i decided to get a refund on my router for today and when i talked to the tech, after puersuading him to tell me the truth. And stop BS'ing me, he broke down and admited that AOL does not work wirelessly on MBP's. So to make a long story short this time, There you go. And one last note, I'm very happy now with my d-link router. I honestly thought it would suck. Not being a brand name router or anything. But amazingly, it works like a brand name item! Again, many thanks all.
Bruce

Apple, please fix this bug. Sending scanned images to "Pictures" is not what I want nor what I was able to do in every previous operation system. I want to save all scanned items in a specific folder - NOT "PICTURES" Please fix this bug NOW!

Apple, please fix this bug. Sending scanned images to "Pictures" is not what I want nor what I was able to do in every previous operation system. I want to save all scanned items in a specific folder - NOT "PICTURES" Please fix this bug NOW!

I only use Image Capture, so I can't speak for other software.
Here is how I select a Scan To destination:
If you are using the minimal details screen, you should have the same submenu to the left of the page size.

Please solve this mysterious broken run arrow

Everything works great for a while. Then suddenly, this will happen. This is on a PXI chassis using a lot of LVOOP. It happened on my PC so I moved the code all to a VM. It worked fine for a while, then it just came back. These are NI's VIs. The weird thing is, if I diagram disable them, I still can't deploy. I get a broken run arrow right at the end of the deployment (when it says deploying Main), but when the broken run arrow is clicked I have the error list with no errors in it. Tried closing everything, still problem not solved.
CLA, LabVIEW Versions 2010-2013
Attachments:
brokenarrow.png ‏35 KB

Try this video showing how I fixed this problem!
https://www.youtube.com/watch?v=qYAzEpTVsaw
How to Fix Your LabVIEW Failed to Compile or LabView Broken Arrow on Compile.
If you have a happy vi running in LabVIEW and it has a happy arrow then it SHOULD compile to an executable. RIGHT??!! NOT... Frequently, especially if the project is LARGE, it will not properly compile!
I show you how you can compile EVEN when you have a broken arrow!
When LabVIEW fails on building an executable it sometimes does not show you WHERE the error is. It also tells you that you need files that you are not using! Go figure! This is because some of the files are ignored that should not be ignored.
If you know how to get rid of the nag screen please let me know by sending an email to me at [email protected]
This is on a Virtual Machine Windows 7 on VMWARE Fusion 6.02 and the bloody Virtual Windows 7 works better on my iMac than it does on the Toshiba Laptop that I cloned it from!
I use the LabVIEW Service Request System and it is COMPLETELY worth the cost. They are EXTRAORDINARY I would say about 98.7% of the time!
If you liked the video please subscribe to my channel.
Please LIKE this video if you found it useful!
My website if you need Patent Help of engineering help!
http://www.take5inc.com/
Video made with SnagIt

False attack alert in 2 sites. Please unblock this sites ?

Similar Messages

Maybe you are looking for